A rapid in vitro assay of cobalamin in human urine and medical tablets using ICP-MS

2009 ◽  
Vol 63 (3) ◽  
Author(s):  
Gai Zhang ◽  
Jianbo Liu ◽  
Zuchao Meng ◽  
Xin Wang
Keyword(s):  
Human Urine ◽  
Inductively Coupled Plasma ◽  
Limit Of Detection ◽  
Rapid Determination ◽  
Vitro Assay ◽  
Cobalt Ions ◽  
Icp Ms ◽  
Relative Standard

AbstractA rapid and simple as well as sensitive inductively coupled plasma mass spectrometry (ICP-MS) method for the determination of cobalamin is described. Cobalamin in human urine and medicine tablet solutions was converted on-line into free cobalt ions in acid medium, the cobalt ions were then detected by ICP-MS. Cobalamin was determined by measuring the increase of integral counts per second intensity, which was linear over the cobalamin concentration range of 1.0 × 10−10 g mL−1 to 8.0 × 10−5 g mL−1, and the limit of detection was 0.05 ng mL−1 (3σ). At the pump rate of 30 rotations per minute, one analysis cycle of cobalamin, including sampling and washing, could be accomplished in 0.5 min with the relative standard deviations of less than 5 %. The proposed procedure was applied successfully in monitoring cobalamin in human urine without any pretreatment process and in rapid determination of cobalamin in multivitamin tablets.

scholarly journals Germanium determination in environmental object by the method of mass spectrometry with inductively coupled plasma

2019 ◽  
Vol 85 (4) ◽  
pp. 110-113
Author(s):  
Olexandr Ponomarenko ◽  
Anatolyi Samchuk ◽  
Kateryna Vovk ◽  
Igor Shvaika ◽  
Ganna Grodzinskaya
Keyword(s):  
Mass Spectrometry ◽  
Sample Preparation ◽  
Inductively Coupled Plasma ◽  
Microwave Field ◽  
Antitumor Effects ◽  
Inductively Coupled ◽  
Ms Analysis ◽  
Icp Ms ◽  
Relative Standard

The analytical technologies of sample preparation of rocks and mushrooms using the microwave field for the determination of germanium by the method of mass spectrometry with inductively coupled plasma (ICP-MS analysis) have been developed. Germanium is a rare element. Germanium is homology of silicon and carbon. To date, the definition of low content of germanium in geological objects is a rather complex analytical task, which requires its concentration - extraction, co-precipitation, ion exchange. At present, the harmonious combination of the method of natural objects decomposition in the microwave field and germanium determination using ICP-MS analysis is particularly promising. Sample preparation of silicate rocks for ICP-MS determination of germanium was carried out by decomposition in a mixture of hydrofluoric, phosphate and nitric acids (5: 5: 2) in a microwave oven program at 240°C for 30 min. Sample preparation of mushrooms for ICP-MS germanium determination was carried out according to the following scheme. Initially, the dried sample was sealed in the presence of CaO, after dissolving it in a mixture of HNO3+HF+H3PO4 (6:6:1). Ge solution was extracted by Nazarenko V.A. extraction method. The developed analytical schemes have made it possible to significantly reduce the duration and labor intensity of sample preparation. The obtained solutions were analyzed using an inductively coupled plasma mass spectrometer. The developed method for determining germanium by ICP-MS analysis has been successfully tested on standard rock samples. The obtained results are in accordance with the accepted attribute, the relative standard deviation Sr ranges from 0.7-0.9. The data on the content and distribution of germanium in the Boletales fungi are obtained. They indicate wild mushrooms contain high levels of germanium, especially Boletus and Mushroom biospores. These studies are necessary because the essential properties of germanium and its compounds attract special attention of scientists today. Complementary Ge compounds which have hypotensive, bactericidal, antiviral and antitumor effects have already been synthesized.

scholarly journals DEVELOPMENT AND VALIDATION OF ULTRAVIOLET-SPECTROPHOTOMETRIC METHOD FOR DETERMINATION OF FEBUXOSTAT FOR CONDUCTING IN-VITRO QUALITY CONTROL TESTS IN BULK AND PHARMACEUTICAL DOSAGE FORMS

2018 ◽  
Vol 11 (9) ◽  
pp. 115
Author(s):  
Jaspreet Kaur ◽  
Daljit Kaur ◽  
Sukhmeet Singh
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Dosage Forms ◽  
Pharmaceutical Dosage Forms ◽  
Relative Standard ◽  
Limit Of Quantitation ◽  
Development And Validation

Objective: A simple, accurate, and selective ultraviolet-spectrophotometric method has been developed for the estimation of febuxostat in the bulk and pharmaceutical dosage forms.Method: The method was developed and validated according to International Conference on Harmonization (ICH Q2 R1) guidelines. The developed method was validated statistically with respect to linearity, range, precision, accuracy, ruggedness, limit of detection (LOD), limit of quantitation (LOQ), and recovery. Specificity of the method was demonstrated by applying different stressed conditions to drug samples such as acid hydrolysis, alkaline hydrolysis, oxidative, photolytic, and thermal degradation.Results: The study was conducted using phosphate buffer pH 6.8 and λmax was found to be 312 nm. Standard plot having a concentration range of 1–10 μg/ml showed a good linear relationship with R2=0.999. The LOD and LOQ were found to be 0.118 μg/ml and 0.595 μg/ml, respectively. Recovery and percentage relative standard deviations were found to be 100.157±0.332% and <2%, respectively.Conclusion: Proposed method was successfully applicable to the pharmaceutical formulations containing febuxostat. Thus, the developed method is found to be simple, sensitive, accurate, precise, reproducible, and economical for the determination of febuxostat in pharmaceutical dosage forms.

scholarly journals Determination of Arsenic, Cadmium, Mercury, and Lead by Inductively Coupled Plasma/Mass Spectrometry in Foods after Pressure Digestion: NMKL Interlaboratory Study

2007 ◽  
Vol 90 (3) ◽  
pp. 844-856 ◽  
Author(s):  
Kaare Julshamn ◽  
Amund Maage ◽  
Hilde Skaar Norli ◽  
Karl H Grobecker ◽  
Lars Jorhem ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Inductively Coupled Plasma ◽  
Method Performance ◽  
Inductively Coupled ◽  
Icp Ms ◽  
Relative Standard ◽  
Limit Of Quantitation ◽  
Plasma Mass Spectrometry ◽  
Standard Deviations

Abstract Thirteen laboratories participated in an interlaboratory method performance (collaborative) study on a method for the determination of arsenic, cadmium, mercury, and lead by inductively coupled plasma/mass spectrometry (ICP/MS) after pressure digestion including the microwave heating technique. Prior to the study, the laboratories were able to practice on samples with defined element levels (pretrial test). The method was tested on a total of 7 foodstuffs: carrot puree, fish muscle, mushroom, graham flour, simulated diet, scampi, and mussel powder. The elemental concentrations in mg/kg dry matter (dm) ranged from 0.0621.4 for As, 0.0328.3 for Cd, 0.040.6 for Hg, and 0.012.4 for Pb. The materials used in the study were presented to the participants as blind duplicates, and the participants were asked to perform single determinations on each sample. The repeatability relative standard deviations (RSDr) for As ranged from 3.8 to 24%, for Cd from 2.6 to 6.9%, for Hg from 4.8 to 8.3%, and for Pb from 2.9 to 27%. The reproducibility relative standard deviations (RSDR) for As ranged from 9.0 to 28%, for Cd from 2.8 to 18%, for Hg from 9.9 to 24%, and for Pb from 8.0 to 50%. The HorRat values were less than 1.5 for all test samples, except for the determination of Pb in wheat flour at a level close to the limit of quantitation (0.01 mg/kg dm). The study showed that the ICP/MS method is satisfactory as a standard method for elemental determinations in foodstuffs.

scholarly journals Rapid and Sensitive Spectrophotometric Method for the Determination of the Trace Amount of Thallium (III) in Water and Urine Samples by New Oxidative Coupling Reaction

2019 ◽  
Vol 53 (4) ◽  
Author(s):  
Padmarajaiah Nagaraja ◽  
Naef Ghllab Saeed Al-Tayar ◽  
Anantharaman Shivakumar ◽  
Ashwinee Kumar Shresta ◽  
Avinash K. Gowda
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Rapid Determination ◽  
Coupling Reaction ◽  
Molar Absorptivity ◽  
Urine Samples ◽  
Oxidative Coupling Reaction ◽  
Relative Standard ◽  
Student’S T

A very simple, sensitive and fairly selective direct spectrophotometric method is presented for the rapid determination of thallium(III) at trace level. The method is based on the oxidation of 2-hydrazono-3-methyl-2,3-dihydrobenzo[d]thiazole hydrochloride (MBTH) by thallium(III) in phosphoric acid medium to form a diazoniumcation, which couples immediately with 10,11-dihydro-5Hdibenzo[b,f]azepine (IDB) at room temperature giving a blue colored species having a maximum absorption at 660 nm. The reaction conditions and other important analytical parameters were optimized.The calibration curve was found to be linear over the range of 0.1-4 μg/mL with molar absorptivity of 4.5 × 104 L mol- cm-1 and Sandell’s sensitivity of 0.00454 μg cm-2. The relative standard deviation and limit of detection have been found to be 0.58% and 0.0147 μg/mL respectively. Almost all common anions and cations are found notto interfering in matrix level of the analytical process. The method has been successfully applied for the determination of thallium(III) in synthetic standard mixtures, water and human urine samples. The performance of proposed method was evaluated in terms of student’s t-test and variance ratio F-test, to find out the significance of proposed method over the reported methods.    

scholarly journals Rapid determination of iodine content in drinking water by isopropyl sensitization and inductively coupled plasma mass spectrometry (ICP-MS)

2021 ◽  
Vol 245 ◽  
pp. 03004
Author(s):  
Yanxia Zeng ◽  
Xiashi Zhu
Keyword(s):  
Drinking Water ◽  
Water Samples ◽  
Inductively Coupled Plasma ◽  
Rapid Determination ◽  
Internal Standard ◽  
Iodine Content ◽  
Ammonia Solution ◽  
Standard Curve ◽  
Icp Ms

A subject for the rapid determination of iodine content in drinking water by isopropyl sensitization and ICP-MS was established. The samples were dissolved in 1% ammonia solution, 127I was selected as the mass number to be measured and 159Tb as an internal standard. At the same time, 4% (V/V) isopropanol was used to enhance aerosol gasification efficiency, 2% NH3·H2O was used to effectively eliminate memory effects of iodine by cleaning sample for 180 seconds. The results show that, the detection limits of iodine in this method are 0.007 mg·kg-1 and it is superior to other literature. The standard curve has a good linear relationship and the recovery rates of testing rusults range are from 96.00% to 112.3%. The content of iodine in standard substance water samples was determined by ICP-MS method. The iodine content in water samples from seven drinking water sources in Lianyungang area was analyzed between 14~21 μg·L-1. It was in line with the allowable value of 10~300 μg·L-1 of the sanitary standard for drinking water, suggesting that the iodine content of drinking water resources in Lianyungang area was in a safe range.

Determination of Ruthenium in Waste Ruthenium-Loaded Carbon Catalyst Samples Using Teflon Pressure Vessel-Assisted Sample Digestion and ICP-OES

2014 ◽  
Vol 1015 ◽  
pp. 570-573
Author(s):  
Xiao Juan Wei ◽  
Jian Ming Pan
Keyword(s):  
Inductively Coupled Plasma ◽  
Limit Of Detection ◽  
Optical Emission ◽  
Calibration Graph ◽  
Emission Spectrometry ◽  
Carbon Catalyst ◽  
Inductively Coupled ◽  
Relative Standard ◽  
Sample Dissolution

A novel method for the determination of ruthenium in waste ruthenium-loaded carbon catalyst samples was established by inductively coupled plasma optical emission spectrometry after samples digested by Teflon pressure digestion vessel with aqua regia. Such experiment conditions were investigated as the influence of sample dissolution methods, digestion time, digestion temperature and interfering ions on the determination. Under the optimized conditions, the limit of detection (LODs) of Ru for tested solution was 9 ng mL-1. The relative standard deviations (RSDs) for Ru was 2.12 % (CRu= 1 mg L-1, n = 7). The linear range of calibration graph for Ru and Zn was 0 ~ 100.00 mg L-1. The proposed method was applied to determine the practical samples with good recoveries and satisfactory results.

scholarly journals Preparation of ashless cellulose paper standards for rapid determination of multi-element concentrations in airborne fine particulate matter using laser ablation inductively coupled plasma mass spectrometry

RSC Advances ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 6644-6653
Author(s):  
Lei Qiao ◽  
Ruijie Zhang ◽  
Jing Qiao ◽  
Xiaoyan He ◽  
Zhiwei Wu
Keyword(s):  
Inductively Coupled Plasma ◽  
Rapid Determination ◽  
Simple Procedure ◽  
Fine Particulate Matter ◽  
Inductively Coupled ◽  
Element Concentrations ◽  
Filter Materials ◽  
Icp Ms ◽  
Plasma Mass Spectrometry

A simple procedure for the rapid determination of multi-element concentrations in PM2.5 samples using LA-ICP-MS was developed. The direct solid sampling method can also be expanded to study element spatial distributions in airborne filter materials.

Determination of Trace Elements in Water by Inductively Coupled Plasma–Mass Spectrometry: Collaborative Study

1994 ◽  
Vol 77 (4) ◽  
pp. 1004-1023 ◽  
Author(s):  
J E Longbottom ◽  
T D Martin ◽  
K W Edgell ◽  
S E Long ◽  
M R Plantz ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Trace Elements ◽  
Inductively Coupled Plasma ◽  
Acid Digestion ◽  
Inductively Coupled ◽  
Icp Ms ◽  
Relative Standard ◽  
Nitric Acid Digestion ◽  
Plasma Mass Spectrometry

Abstract A joint U.S. Environmental Protection Agency (U.S. EPA)—AOAC interlaboratory method validation study was conducted on U.S. EPA method 200.8, Determination of Trace Elements in Waters and Wastes by Inductively Coupled Plasma–Mass Spectrometry. The purpose of the study was to determine and compare the mean recovery and precision of the inductively coupled plasma–mass spectrometry (ICP–MS) analyses for 20 trace elements in reagent water, drinking water, and groundwater. The formal study was based on Youden’s nonreplicate plan for collaborative tests of analytical methods. The test waters were spiked with the 20 trace elements at 6 concentration levels in the 0.8–200 μg/L range, prepared as 3 Youden pairs. Thirteen collaborators spiked 100 mL aliquots of the test waters, acidified them with 1 mL concentrated HNO3 and 0.5 mL concentrated HCl, reduced the volume to 20 mL by heating in an open beaker at 85°C, refluxed them for 30 min at 95°C, and diluted them to 50 mL. After centrifuging or settling the samples, a 20 mL portion of the supernatant was diluted to 50 mL and analyzed by ICP–MS. Related experiments evaluated the method performance in wastewater and wastewater digestate at a single concentration pair, and an alternative nitric acid digestion procedure. Mean recoveries for reagent water, drinking water, and groundwater were generally 95–105% with between-laboratory relative standard deviations about 4–8%. The method also worked well with wastewaters and digestate, with between-laboratory relative standard deviations averaging 8% and recoveries averaging 100%. Recoveries of silver, however, were low in all matrixes at concentrations over 100 μg/L. The nitric acid digestion procedure was comparable in accuracy and precision to the mixed-acid digestion in U.S. EPA method 200.8. The method was adopted first action by AOAC INTERNATIONAL.

Determination of Platinum in Waste Platinum-Loaded Carbon Catalyst Samples Using Teflon Pressure Vessel-Assisted Sample Digestion and ICP-OES

2014 ◽  
Vol 1033-1034 ◽  
pp. 599-602
Author(s):  
Chun Miao Shi ◽  
Xiao Juan Wei
Keyword(s):  
Inductively Coupled Plasma ◽  
Limit Of Detection ◽  
Optical Emission ◽  
Calibration Graph ◽  
Emission Spectrometry ◽  
Carbon Catalyst ◽  
Inductively Coupled ◽  
Relative Standard ◽  
Sample Dissolution

A novel method for the determination of platinum in waste platinum-loaded carbon catalyst samples was established by inductively coupled plasma optical emission spectrometry after samples digested by Teflon pressure digestion vessel with aqua regia. Such experiment conditions were investigated as the influence of sample dissolution methods, digestion time, digestion temperature and interfering ions on the determination. Under the optimized conditions, the limit of detection (LODs) of Pt for tested solution was 15 ng mL-1. The relative standard deviations (RSDs) for Pt was 2.35 % (CPt= 5 mg L-1, n = 7). The linear range of calibration graph for Pt was 0 ~ 150.00 mg L-1. The proposed method was applied to determine the practical samples with good recoveries and satisfactory results.

scholarly journals Extractive spectrophotometric determination of Quetiapine fumarate in pharmaceuticals and human urine using calmagite as an ion-pair reagent

2011 ◽  
Vol 17 (3) ◽  
pp. 259-267 ◽  
Author(s):  
Nagaraju Rajendraprasad ◽  
Kanakapura Basavaiahf ◽  
Basavaiah Vinay
Keyword(s):  
Human Urine ◽  
Limit Of Detection ◽  
Molar Absorptivity ◽  
Ion Pair ◽  
Official Method ◽  
Quetiapine Fumarate ◽  
Relative Standard ◽  
Significant Difference ◽  
Comparison Of The Results

Quetiapine fumarate (QTF) is an antipsychotic drug belonging to the benzisoxazole derivatives indicated for the treatment of schizophrenia. A sensitive and selective method based on dichloromethane-extractable ion-pair of QTF with calmagite (CGT), which exhibited an absorption maximum at 490 nm, is described. At this wavelength, Beer?s law is obeyed over the concentration range of 3.0 - 30.0 ?g ml-1. The apparent molar absorptivity, limit of detection (LOD) and quantitation (LOQ) values are 1.32 ? 104 l mol-1 cm-1, 0.27 and 0.81 ?g ml-1 respectively. The reaction is extremely rapid at room temperature and the absorbance values remain unchanged upto 19 h. The precision results, expressed as intra-day and inter-day relative standard deviation values, are satisfactory (RSD ? 2.2%). The accuracy is satisfactory as well (RE ? 2.44%). The method was successfully applied to the determination of QTF in pharmaceuticals and spiked human urine with satisfactory results. No interference was observed from common pharmaceutical adjuvants in tablets. Statistical comparison of the results with official method showed an excellent agreement and indicated no significant difference in precision.

Sign in / Sign up

Export Citation Format

Share Document