Basic Statements of Research and Magnetic Field of Axial Excitation Inductor Generator

2011 ◽  
Vol 28 (1) ◽  
pp. 49-52
Author(s):  
Igors Stroganovs ◽  
Andrejs Zviedris
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element ◽  
Magnetic Flux ◽  
Magnetic System ◽  
System Optimization ◽  
Magnetic Saturation ◽  
The Finite Element Method ◽  
Flux Linkage ◽  
Axial Excitation

Basic Statements of Research and Magnetic Field of Axial Excitation Inductor GeneratorIn this work the main features of axial excitation inductor generators are described. Mathematical simulation of a magnetic field is realized by using the finite element method. The objective of this work is to elucidate how single elements shape, geometric dimensions and magnetic saturation of magnetic system affect the main characteristics of the field (magnetic induction, magnetic flux linkage). The main directions of a magnetic system optimization are specified.

Thermal and Magnetisms Design of an Inductor Using Finite Element Method

2012 ◽  
Vol 622-623 ◽  
pp. 130-135
Author(s):  
K.K. Boo ◽  
Ovinis Mark ◽  
Nagarajan Thirumalaiswamy
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element ◽  
Thermal Stress ◽  
Magnetic Flux ◽  
Thermal Transition ◽  
The Finite Element Method ◽  
Element Method

Thermal stress points in an inductor can cause insulation deterioration and ageing, leading to winding faults, while high magnetic flux causes interference. In this paper, the thermal and magnetic behaviors of inductors with different winding geometries are investigated using the Finite Element Method (FEM) based on 2-Dimension and 3-Dimension model of an inductor. Inductors with different winding geometries have different thermal envelopes and the geometry with the slowest thermal transition has fewer thermal stress points potentially reducing winding faults at the conductor. Furthermore, slow thermal transition would result in greater magnetic field coverage with no magnetic flux outside boundary of the inductor.

scholarly journals Static force characteristics of electromagnetic actuators for Braille screen

2011 ◽  
Vol 24 (2) ◽  
pp. 157-167 ◽  
Author(s):  
Ivan Yatchev ◽  
Krastio Hinov ◽  
Iosko Balabozov ◽  
Kristina Krasteva
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element ◽  
Permanent Magnet ◽  
Static Force ◽  
The Finite Element Method ◽  
Electromagnetic Actuators ◽  
Minimum Force ◽  
The Magnetic Field ◽  
Force Characteristics

Several constructions of electromagnetic actuators with moving permanent magnet for Braille screen are studied. All they are formed from a basic one that consists of two coils, core and moving permanent magnet. The finite element method is used for modeling of the magnetic field and for obtaining the electromagnetic force acting on the mover. The static force-stroke characteristics are obtained for four different constructions of the actuator. The constructions with ferromagnetic disc between the coils ensure greater force than the ones without disc and can reach the required minimum force.

Finite-Element Analysis of Magnetoelastic Buckling of Ferromagnetic Beam Plate

1980 ◽  
Vol 47 (2) ◽  
pp. 377-382 ◽  
Author(s):  
K. Miya ◽  
T. Takagi ◽  
Y. Ando
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Experimental Results ◽  
The Finite Element Method ◽  
Magnetic Torque ◽  
Element Analysis ◽  
Element Method

Some corrections have been made hitherto to explain the great discrepancy between experimental and theoretical values of the magnetoelastic buckling field of a ferromagnetic beam plate. To solve this problem, the finite-element method was applied. A magnetic field and buckling equations of the ferromagnetic beam plate finite in size were solved numerically assuming that the magnetic torque is proportional to the rotation of the plate and by using a disturbed magnetic torque deduced by Moon. Numerical and experimental results agree well with each other within 25 percent.

An improved conformal mapping method for magnetic field analysis in surface mounted permanent magnet motors

2017 ◽  
Vol 36 (4) ◽  
pp. 892-905
Author(s):  
Behrooz Rezaeealam ◽  
Farhad Rezaee-Alam
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element ◽  
Air Gap ◽  
Field Analysis ◽  
Magnetic Saturation ◽  
Content Type ◽  
Magnetic Field Analysis ◽  
Armature Reaction ◽  
Different Parts

Purpose The purpose of this paper is to present an improved conformal mapping (ICM) method that simultaneously considers the influence of relative recoil permeability of PMs, the armature reaction, the stator slotting, and the magnetic saturation on determination of the PM operating point in its different parts. Design/methodology/approach The ICM method is a time-effective method that considers the magnetic saturation by suitable increments in air-gap length under each tooth and also the width of slot openings. In this paper, the analytical and numerical conformal mappings such as the Schwarz-Christoffel (SC) mapping are used for magnetic field analysis due to the permanent magnets and the armature reaction in one slotted air gap. The field solution in the slotted air gap is obtained through the modulation of field solution in one slotless air-gap using the complex air-gap permeance. Findings The ICM method can consider the magnetic saturation in different electric loadings, and also the variation of PM operating points in its different parts. Practical implications The ICM method is applied to one surface mounted permanent magnet (SMPM) motor and is verified by comparing with the corresponding results obtained through finite element method (FEM), and frozen permeability finite element method (FP-FEM). Originality/value This paper presents an ICM method with a new technique for saturation effect modeling, which can be used to separate and calculate the on-load components of air-gap field and torque.

scholarly journals New Constitutive Matrix in the 3D Cell Method to Obtain a Lorentz Electric Field in a Magnetic Brake

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3185 ◽  
Author(s):  
José Monzón-Verona ◽  
Pablo González-Domínguez ◽  
Santiago García-Alonso
Keyword(s):  
Magnetic Field ◽  
Finite Element Method ◽  
Finite Element ◽  
Computer Applications ◽  
The Finite Element Method ◽  
Cell Method ◽  
Hall Sensors ◽  
Constitutive Matrix ◽  
The Magnetic Field ◽  
Made In

In this work, we have obtained a new constitutive matrix to calculate the induced Lorentz electric current of in a conductive disk in movement within a magnetic field using the cell method in 3D. This disk and a permanent magnet act as a magnetic brake. The results obtained are compared with those obtained with the finite element method (FEM) using the computer applications Getdp and femm. The error observed is less than 0.1173%. Likewise, a second verification has been made in the laboratory using Hall sensors to measure the magnetic field in the proximity of the magnetic brake.

Sign in / Sign up

Export Citation Format

Share Document