scholarly journals Analysis of quality factors for digitization process of old books

2020 ◽  
Vol 11 (2) ◽  
pp. 5-9
Author(s):  
Оlena Tsimer ◽  
◽  
Vyacheslav Repeta ◽  
Ihor Myklushka ◽  
◽  
...  

The digitization process of old books is one of the measures to preserve the cultural heritage of mankind and to make them accessible to a large audience. The task of creating a high quality digital copy of an old book is quite complex and it depends on many factors. Thus, the analysis of the factors that determines the quality of the digitization process has been done, the models of relationships between the factors have been constructed and their priority has been established with the help of the method of factors ranking using the hierarchical representation of relationships between them in the form of graphs, the calculation of the corresponding weight coefficients and the expert survey with its interpretation in a fuzzy form.

2018 ◽  
Vol 17 (4) ◽  
pp. 189-198
Author(s):  
Julia Wojciechowska-Solis ◽  
Andrzej Soroka

This article seeks to describe the attitude of residents of Eastern Poland and Western Ukraine towards regional food products. The objective of the project was to evaluate the elements of promotion, which encourage consumers to buy regional products. Author’s questionnaire was used in the survey of 1,128 residents from Poland, and 1,072 from Ukraine. The Likert five-point scale was used to measure the participant’s attitudes following the construction and validation procedure. The Statistica 13.1 PL program was used in statistical analysis. The most important promotional activities for residents in both countries were: presentation of food products at regional exhibitions, fairs and events of regional and foreign range. The increased interest in regional food products is a manifestation of new food-related tendencies and in particular to preserve behaviors and values stemming from the cultural heritage of both Poland and Ukraine. It is also connected with high quality of regional products. Appropriate promotion helps consumers see the value of regional products.


Author(s):  
EELKE FOLMER ◽  
JAN BOSCH

The earliest design decisions often have a significant impact on software quality and are the most costly to revoke. One of the challenges in architecture design is to reduce the frequency of retrofit problems in software designs; not being able to improve the quality of a system cost effectively, a problem which frequently occurs during late stages. Software architecture assessment is essential in the design of a high quality system. However, assessing the effect of individual design decisions with respect to quality is often complicated by the fact that it is hard to identify exactly how particular qualities and quality factors are improved or impaired by design decisions. In this paper we present a framework that formalizes some of the relationships between software architecture and software quality; it compiles existing design knowledge (quality improving patterns) in a format suitable for architecture assessment. This framework may prevent the retrofit problem and can assist in reasoning about intra- and inter- quality tradeoffs. We illustrate our framework by creating an instance for it for the qualities usability, security and safety.


2021 ◽  
Vol 12 (3) ◽  
pp. 1683-1694
Author(s):  
Samera Obaid Barraood Et.al

The guarantee of software quality is very important. Thus, before a software is released to the end users, the flaws in the software should be detected by using high quality test cases. Currently, gauging the quality of test cases is carried out without any particular model and the criteria for good test cases is still unclear. Therefore, this study studies the literature using Systematic Literature Review (SLR) technique to identify the criteria of good test cases. The SLR considered papers between 2010 and 2018 in IEEE Xplore, ACM Digital Library, and Science Direct databases. Through the searching, it was found 310 papers are related. After filtering using exclusion and insertion criteria, 14 papers were considered for analysis. As a result, the test managed to identify 30 quality factors from the selected articles. These quality factors were additionally inspected, arranged and finished to be incorporated as the quality factors of test cases evaluation metrics.


2019 ◽  
pp. 163-170 ◽  
Author(s):  
O. Kryshtanovskaya ◽  
A. Komarova ◽  
M. Zakharov

As a result of all-Russian expert survey the challenges of cultural management were discussed in order to reveal its weakest points. In the first place, according to the most experts, there is a problem of underfunding, which entails serious consequences such as personnel stagnation, increasing inequality of access to cultural heritage of various strata of the population and regions. In addition, commercialisation of culture lowers its overall level that negatively affects the state of society as a whole. Participants of the survey suggested a range of measures designed to improve the quality of public administration in cultural sector in both law and enforcement aspects. Most experts are convinced that new cultural law which would facilitate an overcoming dramatic inequality is needed.


Author(s):  
A. T. Kunakbaeva ◽  
A. M. Stolyarov ◽  
M. V. Potapova

Free-cutting steel gains specific working properties thanks to the high content of sulfur and phosphorus. These elements, especially sulfur, have a rather high tendency to segregation. Therefore, segregation defects in free-cutting steel continuously cast billets can be significantly developed. The aim of the work was to study the influence of the chemical composition of freecutting steel and casting technological parameters on the quality of the macrostructure of continuously cast billets. A metallographic assessment of the internal structure of cast metal made of free-cutting steel and data processing by application of correlation and regression analysis were the research methods. The array of production data of 43 heats of free-cutting steel of grade A12 was studied. Steel casting on a five-strand radial type continuous casting machine was carried out by various methods of metal pouring from tundish into the molds. Metal of 19 heats was poured with an open stream, and 24 heats – by a closed stream through submerged nozzles with a vertical hole. High-quality billets had a cross-sectional size of 150×150 mm. The macrostructure of high-quality square billets made of free-cutting steel of A12 grade is characterized by the presence of central porosity, axial segregation and peripheral point contamination, the degree of development of which was in the range from 1.5 to 2.0 points, segregation cracks and strips – about 1.0 points. In the course of casting with an open stream, almost all of these defects are more developed comparing with the casting by a closed stream. As a result of correlation and regression analysis, linear dependences of the development degree of segregation cracks and strips both axial and angular on the sulfur content in steel and on the ratio of manganese content to sulfur content were established. The degree of these defects development increases with growing of sulfur content in steel of A12 grade. These defects had especially strong development when sulfur content in steel was of more than 0.10%. To improve the quality of cast metal, it is necessary to have the ratio of the manganese content to the sulfur content in the metal more than eight.


Author(s):  
Masrukin Masrukin ◽  
Hermanto Hermanto

Customer satisfaction is influenced by service quality factors, this study aims to find out and analyze how much influence the quality of service on customer satisfaction is felt by customers who use the service of Poor Rice (Raskin) at the Office of Public Companies Logistics Agency (Perum BULOG) in Sampit City Regency East Kotawaringin. The research method used in this study is the method of observation, questionnaire/questionnaire and documentation using a Likert scale and the method of determining the sample used is the error rate of 5% as many as 213 samples. Testing the hypothesis used is a statistical test with the formula "Product moment person". The results showed that there was a very strong correlation between Service Quality and Customer Satisfaction of the Office of Public Company of the Logistics Affairs Agency (Perum BULOG) in the District of East Kotawaringin. As much as 0.9968514278 based on the calculation of Pearson Product Moment value.


2020 ◽  
pp. 52-58 ◽  
Author(s):  
A. A. Eryomenko ◽  
N. V. Rostunova ◽  
S. A. Budagyan ◽  
V. V. Stets

The experience of clinical testing of the personal telemedicine system ‘Obereg’ for remote monitoring of patients at the intensive care units of leading Russian clinics is described. The high quality of communication with the remote receiving devices of doctors, the accuracy of measurements, resistance to interference from various hospital equipment and the absence of its own impact on such equipment were confirmed. There are significant advantages compared to stationary patient monitors, in particular, for intra and out-of-hospital transportation of patients.


2018 ◽  
pp. 26-35
Author(s):  
Z. A. Agaeva ◽  
K. B. Baghdasaryan

The transthoracic echocardiography made by multifrequency probes with support of the mode of the second harmonic imaging, is a competitive method for visualization of the main coronary arteries and allows to estimate coronary blood flow with high quality. Of course, the method has considerable restrictions, most important of which is the low spatial resolution of a method, due to small acoustic window. Because of this the transthoracic visualization of coronary arteries perhaps will not become the leading method of anatomic reconstruction of separately taken coronary artery and especially all coronary arteries system. However uniqueness and indisputable advantage of this method is an opportunity to noninvasively estimate a coronary blood flow both once, and in dynamics.


2020 ◽  
Vol 18 (4) ◽  
pp. 739-752 ◽  
Author(s):  
R.M. Sadykov

Subject. This article deals with the issues of social justice and a high quality of life, creating favorable economic and social conditions. Objectives. The article aims to assess the rate and changes in poverty in Russia and the Republic of Bashkortostan and develop complementary measures to reduce it. Methods. For the study, I used the methods of logical, comparative, economic and statistical analyses, the results of sociological studies, and official statistics. Results. The article highlights additional measures to reduce poverty in the region, including the establishment of a minimum social standard of living in each particular region that determines the poverty rate. Conclusions. Various factors, such as economic sanctions, economic slowdowns, territorial and regional imbalances, lead to living standards decline and poverty rise.


Author(s):  
La Duc Minh ◽  
Nguyen Thi Hao ◽  
Vu Thi Thuy

Ethnic affairs play an important role in socio of ethnic groups’ solidarity, assurance of security and national defense stability. In -economic development, maintenanceorder to improve the quality of ethnic affairs, it is practical to carry out postgraduate training of officer implementing ethnic affairs using state budget with the aim of encouraging and enhancing officer quality to satisfy high-quality human resource in international integration.


Sign in / Sign up

Export Citation Format

Share Document