scholarly journals Efektifitas Pemberian Stimulant Better dan Waktu Sadap Terhadap Produksi Lateks Tanaman Karet (Hevea brasiliensis Muell Arg

2019 ◽  
Vol 7 (2) ◽  
pp. 58
Author(s):  
Engelbertus Huvat ◽  
Akhmad Sopian ◽  
Tutik Nugrahini ◽  
Zainudin Zainudin
Keyword(s):  
Block Design ◽  
Dry Weight ◽  
Production Potential ◽  
Randomized Block Design ◽  
Main Plot ◽  
Wet Weight ◽  
High Doses ◽  
The Right ◽  
Latex Production ◽  
Plot Design

The factors that influence rubber production are planted clones, plant care and tapping techniques. With the right tapping technique, both tapping time, tapping method and mature tapping age, the production potential of a superior clone of rubber plants that has been well maintained can be maintained. The technique of rubber tapping is closely related to the expected level of production, even very determining the age of the tree economy. The research objective was to determine the effect of stimulant better and tapping time on latex production. The method used was a randomized block design with two-factor split plot design. The first factor (main plot) is the time of tapping consists of 3 levels, namely; w1: 05 in the morning, w2: 06 in the morning, w3: 07 in the morning. The second factor (sub-plot), namely the stimulant dosage better consists of 4 levels, namely; b0: control, b1; 0.5 g, b2; : 1 g, b3; 1.5 g. The results showed that stimulate better treatment had a significant effect on latex volume, wet weight and latex dry weight, but was not significant for latex dryness levels. Tapping time was not significant for latex yield, latex volume, wet weight, latex dry weight and highest dry rubber content at 7am. Stimulant Better treatment has a significant effect on latex volume, wet weight, and latex dry weight, but if given at high doses it will reduce the dry content of rubber. The interaction of treatment when tapping and stimulant is better not significant for latex production. The stimulant application better does not exceed the dose of 0.5 g / principal. Doses> 0.5 g / staple will have an impact on the dry tapping field.

scholarly journals Respons Pertumbuhan dan Rendemen Minyak Klon Nilam (Pogostemon cablin Benth) terhadap Aplikasi Berbagai Dosis Urea (Growth Response And Yield Of Patchouli Clones (Pogostemon Cablin Benth) On Dose Urea Various Applications)

2020 ◽  
pp. 109-119
Author(s):  
Retno Ayu Diah Pangestu ◽  
M. Tahir ◽  
Fatahillah Fatahillah
Keyword(s):  
Block Design ◽  
Dry Weight ◽  
Optimal Dose ◽  
Fertilizer Application ◽  
Control Treatment ◽  
Randomized Block Design ◽  
Best Response ◽  
Pogostemon Cablin ◽  
Wet Weight ◽  
The Right

Patchouli (Pogostemon cablin Benth) is a plant that produces essential oils and important foreign exchange earner for Indonesia. Using superior clones  with the right fertilizer application will increase the yield of patchouli oil. The research aims to obtain patchouli plants that have the best response of urea fertilization application and optimum dosage of urea for patchouli plant growth. The study was conducted at the Politeknik Negeri lampung’s teaching farm in December 2018 until May 2019. The experiment was conducted using a factorial randomized block design (RBD), consisting of two treatment factors, namely the type of urea clone. The first factor is the type of clone consisting of 2 levels, namely NPL 9 clone and Lhokseumawe clone. The second factor is the treatment of urea doses consisting of 4 levels, namely control, 250 kg.ha-1, 300 kg.ha-1, and 350 kg.ha-1. Variables observed included plant’s height, bough, diameter, number of leaves, stalk angle, chlorophyll content, wet weight of plant, wind dry weight of plant, and yield. The results of research showed  NPL 9 clone had a superior appearance and 350 kg.ha-1 of urea dose  was the optimal dose compared to other doses and could increase patchouli yield 2,3% compared to the control treatment.

scholarly journals Analisis Pertumbuhan dan Produksi Kedelai yang Diberi Perlakuan dengan Ekstrak Sentang (Azadirachta excelsa (Jack)) dan Mindi (Melia azedarach L.)

2020 ◽  
Vol 11 (3) ◽  
pp. 163-169
Author(s):  
Rummi Azahra Gumilar ◽  
Nurheni Wijayanto ◽  
Arum Sekar Wulandari
Keyword(s):  
Block Design ◽  
Dry Weight ◽  
Agroforestry System ◽  
Melia Azedarach ◽  
Randomized Block Design ◽  
Main Plot ◽  
Growth Production ◽  
Soybean Plants ◽  
Four Levels ◽  
Plot Design

Allelopathy interaction can occur between A. excelsa or M. azedarach with soybean plants which is planted as intercrops in agroforestry system. The objectives of this study were to analyze the effect of root, leaf, and twig ectracts of A. excelsa and M. azedarach on growth and production of soybean. This study was conducted in open fields using a split-split plot design inside randomized block design. The main plot was the plant species as extract materials consisted of Azadirachta excelsa and Melia Azedarach. The subplot was the part of the plant consisted of root, leaf, and twig. Sub-subplot was the concentration of the extract consisted of four levels, 0% (control), 1.25%, 2.5%, and 5%. Each treatment was repeated for 3 time. Result of this study showed that the root, leaf and twig extracts of A. excelsa and M. azedarach did not give significant effect to the height growth, dry weight, as well as soybean production. Key words: agroforestry, allelopathy, growth, production

scholarly journals Pertumbuhan dan Produksi Dioscorea sansibarensis Pax pada Perlakuan Panjang lanjaran dan Waktu Batang Membelit*

2018 ◽  
Vol 45 (3) ◽  
pp. 249
Author(s):  
Solikin ,
Keyword(s):  
Block Design ◽  
Soil Surface ◽  
Dry Weight ◽  
Growth And Yield ◽  
Botanic Garden ◽  
Randomized Block Design ◽  
Two Factors ◽  
Main Plot ◽  
Total Plant ◽  
Total Dry Weight

Dioscorea is potentially used as staple food to support food security. The research was aimed to determine the effect of stake length and time of  stem twining  on  the growth of Dioscorea sansibarensis Pax. The experiment was conducted  in  Purwodadi Botanic Garden from December 2014 until May 2015 using split plot randomized block design consisted of two factors, i.e. the stake length and time of stem twining. The stake length was the main plot consisted of 150 cm, 100 cm and 50 cm above soil surface and without stake (control). The time of stem twining as subplots, i.e. stem twined early, twined at the time of 4 leaves stage, and twined at 8 leaves stage. Each combination of the treatments was replicated three times. The results showed that there was significant effect on the stake length  and the time of stem twining treatments on the plant growth and yield. The stake  length of 150 cm treatment produced the highest fresh tuber and total plant dry weight, i.e., 257.24 g and 132.77 g per plant, respectively. On the contrary, the plant without stake produced the lowest fresh tuber and  total dry weight of plant, i.e., 112.10 g and 48.65 g per plant, respectively.<br /><br />Keywords: biomass,leaf area, photosyntesis, tuber weight

scholarly journals PENGARUH KONSENTRASI PUPUK ORGANIK CAIR SERTA VARIETAS DAN GALUR TERHADAP PERTUMBUHAN DAN PRODUKSI BENIH TANAMAN KACANG PANJANG (Vigna sinensis (L.) Savi ex Hassk.)

2021 ◽  
Vol 46 (3) ◽  
pp. 278
Author(s):  
Arnandha Desya Refaldi ◽  
Prasodjo Soedomo ◽  
Muharam Muharam ◽  
Yayu Sri Rahayu
Keyword(s):  
Seed Weight ◽  
Block Design ◽  
Organic Fertilizer ◽  
Agricultural Technology ◽  
Vegetable Crops ◽  
Duncan Multiple Range Test ◽  
Randomized Block Design ◽  
Main Plot ◽  
Range Test ◽  
Plot Design

Long bean production in Indonesia continues to decline every year, this is due to land conversion and the lack of application of agricultural technology. One of the efforts to increase long bean production is by multiplying quality seeds using organic materials as nutrients needed by plants. This study aims to determine the response of the growth and production of long bean seeds to the interaction of strains, varieties with a concentration of liquid organic fertilizer. The research was conducted at the Vegetable Crops Research Institute, Lembang, West Bandung Regency from July 2020 to January 2021. The research method used was an experimental method with a Randomized Block Design (RBD) with a split-plot design consisting of 2 factors: the first factor (main plot) (A) was the variety and strain with 2 levels, a1 (Tavi canton variety) and a2 (pras-1 strain).The second factor (subplot) (B) is concentration of biopras-1 with 5 levels, b1 (0 cc/l-1 water), b2 (1 cc/l-1 water), b3 (2 cc/l-1 water), b4 (3 cc/l-1 water) and b5 (4 cc/l-1 water). The effect of the treatment was analyzed by means of variance and if the f test at 5% level was significantly different, then to find out the best treatment was continued with the DMRT (Duncan Multiple Range Test) at the 5% level. The results showed that there was an interaction between varieties, lines with various concentrations of biopras-1 liquid organic fertilizer on dry seed weight per plant, dry seed weight per plot, and 1000 seeds weight. Treatment of pras-1 lines with the concentration of liquid organic fertilizer biopras-1 4 cc / l of water was able to give the best results on dry seed weight per plant (35.31 gr), dry seed weight per plot (1.298.20 gr or 2.16 Ton/ha-1) and the weight of 1000 seeds (153.10 gr).

scholarly journals PENGARUH PENAMBAHAN PUPUK MIKRO DAN BEBERAPA GENOTIPE SORGUM (Sorghum bicolor (L.) Moench) TERHADAP INTENSITAS PENYAKIT ANTRAKNOSA (Colletotrichum sp.) DI LAHAN PETANI TANJUNG BINTANG LAMPUNG SELATAN

2020 ◽  
Vol 8 (2) ◽  
pp. 347
Author(s):  
Farastika Unjunan Muli ◽  
Efri Efri ◽  
Muhammad Syamsoel Hadi ◽  
Radix Suharjo
Keyword(s):  
Sorghum Bicolor ◽  
Block Design ◽  
Plant Diseases ◽  
The Other ◽  
Anthracnose Disease ◽  
Randomized Block Design ◽  
Main Plot ◽  
Sorghum Genotypes ◽  
Sorghum Bicolor L ◽  
Plot Design

One of the diseases that often found in sorghum plants is anthracnose disease caused by Colletotrichum sp. The purposed of this study was to determine the effect of adding micro fertilizer and the use of several sorghum genotypes on the intensity of anthracnose disease. The study was conducted in Sukanegara, Tanjung Bintang, South Lampung in April 2017 - February 2018 and at the Laboratory of Plant Diseases and Pests, Faculty of Agriculture, University of Lampung. The treatments were arranged using a randomized block design in a split plot design (3 times replications), the main plot was micro nutrients (with micro addition and without micro addition) and 15 subgroups of sorghum genotypes (Numbu, Samurai 1, GH3, UPCA, GH4, P / I WHP, GH6, Super 2, GH13, P / F 51-93-C, Super 1, GH5, Mandau, GH7, and Talaga Bodas). The results showed that the addition of "ZincMicro" micro fertilizers to sorghum plants did not affect the intensity of anthracnose disease, however there were differences in the intensity of anthracnose diseases between sorghum genotypes. Numbu Genotype, GH 3, and GH 13 were relatively more resistant to anthracnose disease than the other genotypes.

scholarly journals The Growth of FHIA-17 Banana Seedlings with Application of Hijauan Paitan Fertilizer (Titonia diversifolia) and Cow Manure

2019 ◽  
Vol 1 (4) ◽  
pp. 77-83
Author(s):  
Suswati Suswati ◽  
Asmah Indrawaty ◽  
Rizal Aziz ◽  
Eka Prasaditya Ramadhani
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Dry Weight ◽  
Cow Manure ◽  
Growing Media ◽  
Randomized Block Design ◽  
Affected Plant ◽  
Wet Weight ◽  
Number Of Leaves

Growth of FHIA-17 Banana Seedlings with the Application of Hijauan Paitan Fertilizer (Titonia Diversifolia) and Cow Manure. The aim of this study was to obtain data on the growth of FHIA-17 banana seedlings after application of T.diversifolia forage and cow manure. Using a factorial Randomized Block Design (CRD) with two treatment factors. The first factor is the forage dose of T. diversifolia (P) with 5 levels, P0=Control; P1=12.5 g kg-1 planting medium (equivalent to 5 tons ha-1); P2=25 g kg-1 planting medium (equivalent to 10 tons ha-1); P3=37.5 g / kg of planting media (equivalent to 15 tons ha-1); P4=50 g kg-1 of growing media (equivalent to 20 tons ha-1). The second factor is the dose of cow manure (K) with 5 treatment levels namely, K0=Control; P1=12.5 g kg-1 of growing media (equivalent to 5 tons ha-1); K2=25 g kg-1 of growing media (equivalent to 10 tons ha-1); K3= 37.5 g kg-1 of growing media (equivalent to 15 tons ha-1); K4=50 g kg-1 planting medium (equivalent to 20 tons ha-1 and repeated 2 (two) times. Observed parameters were plant height (cm), number of leaves, stem circumference (mm), plant wet weight (g), plant dry weight (g). The results of this study indicate that the application of forage T. diversifolia significantly affected plant height and number of leaves. It’s not real with respect to all observational parameters.

scholarly journals PENGARUH LAMA PERENDAMAN AIR KELAPA TERHADAP PERTUMBUHAN DAN HASIL TANAMAN BAWANG MERAH (Allium ascalonicum. L) PADA BERBAGAI MACAM MEDIA

2019 ◽  
Vol 13 (1) ◽  
pp. 33-44
Author(s):  
Fendi Ramdhani
Keyword(s):  
Water Immersion ◽  
Block Design ◽  
Dry Weight ◽  
Coconut Water ◽  
Growth And Yield ◽  
Randomized Block Design ◽  
Significant Difference ◽  
Wet Weight ◽  
Number Of Leaves ◽  
Number Of Shoots

Demand for shallots continues to increase due to increasing population and consumption of mera onions. This research was carried out in jingglong village, Sutojayan sub-district, Blitar district in April - June 2018. This research was conducted using factorial randomized block design (RBD) with 2 factors, the first factor was immersion in coconut water (k) which consisted of 3 levels namely immersion for 1 hour (k1) soaking for 2 hours (k2) soaking for 3 hours (k3). The second factor is various media (m) consisting of 3 levels: soil 1: fertilizer 1: husk ash 1 (m1), soil 2: fertilizer 1: husk ash 1 (m2), soil 1: fertilizer 2: husk ash 1 ( m3) The variables observed included plant height, number of shoots, number of leaves, weight of tuber stover, wet weight of tubers, dry weight of tubers. Data were analyzed using analysis of variance (ANOVA) level of 5% and further testing with Duncan's Multiple Range Test (DMRT). There is no real interaction between coconut water immersion and various planting media on the growth and yield of shallots. The treatment of coconut water immersion (k) significantly affected the height of shallot plants at the age of 14 days and 21 days, and affected the number of shoots and leaves at all ages of observation. The treatment of various planting media showed a significant difference at the age of 14 days to 21 days. The treatment of various planting media had a significant effect on the weight of stover and the wet weight of onion tubers with the highest yield (m1) of 122.03 gr, while in the wet weight the highest yield was on media (m1) with a yield of 80.51 gr.

scholarly journals PENGARUH TAKARAN PUPUK ORGANIK DAN ANORGANIK TERHADAP PERTUMBUHAN DAN PRODUKSI TANAMAN SELADA (Lactuca sativa L.)

2018 ◽  
Vol 13 (1) ◽  
pp. 1
Author(s):  
Meci Yuniastuti Rahma
Keyword(s):  
Block Design ◽  
Organic Fertilizer ◽  
Dry Weight ◽  
Cow Manure ◽  
Lettuce Plant ◽  
Lactuca Sativa L ◽  
Randomized Block Design ◽  
Wet Weight ◽  
Number Of Leaves ◽  
Npk Fertilizer

The research objective was to study the effect of organic and inorganic fertilizer on the growth and production of lettuce. This research was conducted from February 2017 to April 2017 at Green House, Faculty of Agricultural,Sjakhyakirti University Palembang. The research used Randomized Block Design (RAK) with 12 treatments and repeated 3 times. The treatment in this research was K (50 g.crop-1 cowmanure and 0 g.crop-1NPK fertilizer), L (50 g.crop-1 cow manure and 1 g.crop-1 NPK fertilizer ), M (50 g.crop-1 cow manure and 2 g.crop-1 NPK fertilizer), N (50 g.crop-1 cow manure and 3 g.crop-1NPK fertilizer), O ( 80 g.crop-1 cow manure and 0 g.crop-1 NPKfertilizer), P (80 g.crop-1 cow manure and 1 g.crop-1 NPK fertilizer), Q (80 g.crop-1 cow manure and 2 g.crop-1NPK fertilizer), R (80 g.crop-1 cow manure and 3 g.crop-1NPK fertilizer), S (110 g.crop-1 cow manure and 0 g.crop-1 NPK fertilizer), T (110 g.crop-1 cow manure and 1 g.crop-1NPK fertilizer), U (110 g.crop-1 cow manure and 2 g.crop-1 NPK fertilizer), V (110 g.crop-1 cow manure and 3 g.crop-1 NPK fertilizer). The variables observed in this study were plant height (cm), number of leaves (strands), number of roots, wet weight of plant (g), dry weight of plant (g). The results showed that the organic fertilizer of cow manure and inorganic NPK fertilizer have no significant effect on the growth but has a significant effect on the production of lettuce plant. However, the U (110 g.crop-1 cow manure and 3 g.crop-1 NPK fertilizer) showed the best production of many leaves and wet trimming weight of lettuce.

scholarly journals Pengaruh Dosis Kompos Limbah Kulit Kopi Terhadap Pertumbuhan Beberapa Varietas Bibit Kopi Arabika (Coffea arabika L.)

2020 ◽  
Vol 4 (2) ◽  
pp. 141-150
Author(s):  
Ridha Tawar Mitha ◽  
Erida Nurahmi ◽  
Ashabul Anhar
Keyword(s):  
Block Design ◽  
Dry Weight ◽  
Arabica Coffee ◽  
Randomized Block Design ◽  
Coffee Arabica ◽  
Wet Weight ◽  
Number Of Leaves ◽  
Difference Test ◽  
Test Result ◽  
Coffee Seed

Abstrak. Kopi merupaakan salaah satu haasil komoiditi perkebun4n yng memilki nilaii ekonoomis yng cukuup tiinggi di aantara taanaman peerkebunan laainnya dan beerperan peenting seebagai sumbeer devisa neegara. Penelitian ini bertujuan untuk mengetahui pertumbuhan beberapa varietas kopi arabika dengan menggunakan kompos limbah kulit kopi. Penelitian ini akan dilaksanakan di Batang Beranun Kecamatan Bandar Kabupaten Bener Meriah dan Laboratorium Fisiologi Tumbuhan Fakultas Pertanian Universitas Syiah Kuala Darussalam Banda Aceh pada April sampai dengan Juni 2018. Penelitian ini menggunakan Rancangan Acak Kelompok (RAK)  pola faktorial 3 x 3 yang terdiri dari dua faktor. Adapun faktor yang diteliti adalah beberapa varietas kopi arabika (V) dan faktor kedua dosis pupuk kompos limbah kulit kopi (K). Data yang diperoleh dianalisis dengan menggunakan uji F, dilanjutkan dengan uji BNJ pada taraf 5%. Hasil penelitian menunjukan bahwa komposisi limbah kulit kopi berpengaruh nyata terhadap pertambahan jumlah daun pada umur 90 HSPT. Terdapat interaksi yang sangat nyata  pada pertambahan jumlah daun tanaman kopi arabika.Effect of Compost Composition of Coffee Leather Waste on the Growth of Several Coffee Arabica Seed Varieties (Coffea arabica L.)Abstrac. Effect of doses of coffee skin waste compost on the growth of several arabica coffee seed varieties. This study aims to determine the effect of doses of coffee skin waste compost and varieties of arabica coffee seedlings on the growth of coffee seedlings. This research was carried out on farmer-owned plantations and plant physiology laboratories majoring in Agrotechnology, Faculty of Agriculture, University of Aceh, Shiite University, Aceh from April to July 2018. This study used a randomized block design of factorial 3 x 3 and 3 replications, so there were 27 experimental units and continued with an honest real difference test at the level of 5% on a significant f test result. The first factor is the variety with 3 levels, namely: Ateng widows, Ateng super, and Ateng keumala varieties. The second factor is the dose of coffee skin waste compost with 3 levels, namely 25% and 50% control. The parameters observed were seedling height, stem base diameter, number of leaves, wet weighted weight and dry weighted weight. The results showed that the treatment of varieties significantly affected wet weight and dry weight at 90 HSPT and did not affect other parameters. Giving several concentrations of local microorganisms significantly affected the number of leaves of the age 8 cacao seedlings of coffee skin waste compost that had no significant effect on all observed parameters. There is no real interaction between the treatment of varieties and doses of coffee skin waste compost.

scholarly journals EFEKTIFITAS PUPUK DALAM BEBERAPA UKURAN SACHET TERHADAP PERTUMBUHAN BIBIT KELAPA SAWIT (Elaeis guineensis Jacq)

2019 ◽  
Vol 3 (2) ◽  
pp. 80-89
Author(s):  
Alia Rahma ◽  
Mardiana Wahyuni ◽  
Saroha Manurung
Keyword(s):  
Elaeis Guineensis ◽  
Block Design ◽  
Dry Weight ◽  
Conservation Action ◽  
Conservation Treatment ◽  
Randomized Block Design ◽  
Plant Maintenance ◽  
Wet Weight ◽  
Planting Materials ◽  
Soil Climate

The productivity of oil palm plants is influenced by genetic factor planting materials, soil, climate, cultivation and plant maintenance. Nursery is the first step to prepare the prime plant material. In the implementation of the nursery, fertilization is one important maintenance factor and should be done with reference to 4T (Exactly Types, Dosage, Time and Method). Loss of fertilizer is an important thing to be controlled. This research is a conservation action by packing fertilizer in sachet bag and conservation treatment. The research was conducted in January 2019 – July 2019 at STIPAP. The study used a non factorial randomized block design with S one sowing system, S two, S three, and S four sachet systems of different sizes using conservation. The best treatment is the application of gauze sachet system (S four = 638 mesh) with conservation increasing the growth of seedling height (91,36 cm), stem diameter (50,80 mm), increasing chlorophyll (55,62 cci), increasing root wet weight 99,73 (44%) and canopy dry weight 55,10 (44%).

Sign in / Sign up

Export Citation Format

Share Document