scholarly journals Electrode Modification Using Catalyst Powder

2020 ◽  
Vol 67 (6) ◽  
pp. 334-337
Author(s):  
Shunsuke YAGI
2021 ◽  
Vol 40 ◽  
pp. 101895
Author(s):  
Jiawei Xie ◽  
Yaofeng Chang ◽  
Junxiang Xie ◽  
Mabruk Adams ◽  
Danqing Zhao ◽  
...  

2007 ◽  
Vol 52 (5) ◽  
pp. 1865-1870 ◽  
Author(s):  
Xiliang Luo ◽  
Anthony J. Killard ◽  
Aoife Morrin ◽  
Malcolm R. Smyth

2021 ◽  
Vol 10 (4) ◽  
pp. 39-45
Author(s):  
Phuong Pham Thi Mai ◽  
Hoan Nguyen Quoc ◽  
Quan Do Quoc ◽  
Hung Nguyen Thanh

In this paper, the Au doped Mn1Co9Ox was investigated for total oxidation of CO. The sol-gel method was applied to prepare this catalyst and some modern analysis methods as XRD, EPR, TPx, SEM were utilized to characterize its properties. The XRD patterns showed only Co3O4 phase without any peaks belonging to Mn or Au. However, the presence of Au and Mn was confirmed by EPR and O2-TPD results. With the aim to further apply catalyst in reality, the Au doped Mn1Co9Ox was deposited on ceramic by sol-gel, wet impregnation. The SEM images displayed the successful coating of active phase on substrate. However, the complete catalyst system didn’t have the high activity in total CO oxidation like the catalyst powder because of large agglomerations on coatings.


1964 ◽  
Vol 19 (2) ◽  
pp. 326-329 ◽  
Author(s):  
Irving Fatt

The advantages of a 1-μ-diameter platinum cathode in the Clark-type oxygen electrode are shown to be freedom from effects due to flow, stirring, or mechanical pressure. When used with a 5-mil polyethylene membrane the 1-μ electrode shows only a 2% difference between a vigorously stirred solution and the unstirred solution. A mechanical pressure of 200 psi on the 1-μ covered electrode caused only a 20% reduction in current. The use of a 1-μ covered electrode as an implant is suggested. electrode implant; Clark-type oxygen electrode modification; polarographic electrode; oxygen measurement; platinum electrode Submitted on March 4, 1963


2012 ◽  
Author(s):  
Rusmidah Ali ◽  
Siti Salamah Maisoan @ Selamat

Asid amino merupakan bahan asas dalam tisu tumbuhan dan haiwan. Tirosina (Tr) salah satu jenis asid amino yang mengandungi gelang aromatik, telah dipilih sebagai sampel untuk proses degradasi dalam medium akueus. Ini bertujuan melihat kesan penggunaan mangkinfoto dalam sinaran ultralembayung (λ < 400 nm) atau cahaya matahari ke atas molekul tirosina. Kajian telah dijalankan menggunakan sistem cahaya, mangkin serbuk TiO2, hidrogen peroksida, H2O2 dan ion logam. Penambahan ion logam seperti Ni2+, Cu2+, Ag+, Mn2+, Co2+, Fe2+ dan Cd2+ dan agen pengoksidaan, iaitu hidrogen peroksida adalah untuk mendapatkan kaedah yang paling cekap. Keputusan menunjukkan penambahan H2O2 dan ion Fe2+ dan Ni2+ berjaya meningkatkan kecekapan proses degradasifoto tirosina. Ion Ni2+ memberikan keputusan terbaik berbanding ion-ion lain. Ion Cu2+, Ag+, Mn2+ dan Cd2+ merencat proses degradasi. Keputusan juga menunjukkan cahaya matahari adalah setanding dengan cahaya ultralembayung. Kepekatan H2O2 terbaik adalah 5.0 x 10-2M dan semakin banyak TiO2 digunakan semakin baik peratus degradasi tirosina. Oleh itu kaedah optimum untuk proses degradasifoto ialah Tr 2.5 x 10-4 M + TiO2 + H2O25.0 x 10-3 M + Mn+ 1.0 x 10-2 M. Proses degradasifoto dikaji menggunakan spektroskopi ultralembayung-nampak pada julat panjang gelombang 400-200 nm. Kata kunci: Tirosina; degradasifoto; serbuk TiO; akueus Amino acid is a basic component in plant or animal tissue. Tyrosine (Tr), an amino acid which contains aromatic ring, was chosen as a sample for a photodegradation process in an aqueous system. The purpose of the experiment is to study the effect of photocatalysis under UV (λ < 400 nm) or sunlight on tyrosine. The experiment was carried out by using UV light, catalyst powder (TiO2), hidrogen peroxide H2O2 and metal ions system. The addition of oxidising agent H2O2 and metal ions such as Ni2+, Cu2+, Ag+, Mn2+, Co2+, Fe2+ and Cd2+ were used in order to achieve the most efficient system. Results showed that the system with added H2O2 and metal ions such as Ni2+ and Fe2+ had successfully enhanced the process of the tyrosine photodegradation. Other metal ions system such as Cu2+, Ag+, Mn2+ and Cd2+ were found to inhibit the degradation process. The results also showed that sunlight was comparable to ultraviolet light. The best H2O2 concentration was 5.0 x 10-2 M and the percentage of tyrosine degradation increased with the addition of more TiO2) by mass. Therefore, the optimum condition for tyrosine photodegradation process was in Tr 2.5 x 10-4 M + TiO2 + H2O2 5.0 x 10-3 M + H2O2 1.0 x 10-2 M. The dissappearance of tyrosine in the photo degradation process was monitored by UV-visible spectroscopy between 400-200 nm. Key words: Tyrosine; photodegradation; TiO2 powder; akueus


Sign in / Sign up

Export Citation Format

Share Document