scholarly journals The Performance of Plasmonic Gold and Silver Nanoparticle-Based SERS Sensors

2020 ◽  
pp. 1320-1327
Author(s):  
Alwan M. Alwan ◽  
Mohammed S. Mohammed ◽  
Russul M. Shehab
Keyword(s):  
Casting Process ◽  
Laser Pulses ◽  
Plasmonic Nanoparticles ◽  
Raman Signal ◽  
Ag Nps ◽  
Au Nps ◽  
Glass Substrates ◽  
Laser Ablation Process ◽  
Surface Enhanced Raman ◽  
The Stability

The influence of different types of plasmonic gold (Au-NPs) and silver (Ag-NPs) nanoparticles as well as aging on the performance of Surface-Enhanced Raman Scattering (SERS) sensors were studied. The average diameters of Au-NPs and Ag-NPs were about 23 nm and 15 nm, respectively, with a number of laser pulses of about 200. plasmonic nanoparticles were synthesized by laser ablation process in distilled water using a fixed energy laser fluence of about 14 J/cm2 of Nd-YAG laser, with 1060 nm wavelength and 1 Hz pulse repetition rate. The SERS sensor was carried out by quick drop casting process of plasmonicplasmonic nanoparticles on glass substrates. The morphological aspects and the performance of SERS sensors were investigated by high resolution transmission electron microscopy (HR-TEM) and Raman spectroscopy. All the results indicated the significant dependence of the performance of the sensor on the types of the plasmonic nanoparticles . The obtained Raman signal intensity of Ag-NPs was about 105a.u. compared with 103a.u. for Au-NPs. While, the stability of Au-NPs was much higher than that of Ag-NPs based on SERS sensors due to the normal oxidation process of Ag-NPs.

Au-on-Ag nanostructure for in-situ SERS monitoring of catalytic reactions

2022 ◽  
Author(s):  
Shuyue He ◽  
Di Wu ◽  
Siwei Chen ◽  
Kai Liu ◽  
Eui-Hyeok Yang ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Thermal Evaporation ◽  
Reduction Process ◽  
Ag Nps ◽  
Au Nps ◽  
Surface Enhanced ◽  
Surface Enhanced Raman ◽  
Enhanced Raman Scattering ◽  
Raman Probe

Abstract Dual-functionality Au-on-Ag nanostructures (AOA) were fabricated on a silicon substrate by first immobilizing citrate-reduced Ag nanoparticles (Ag NPs, ~43 nm in diameter), followed by depositing ~7 nm Au nanofilms (Au NFs) via thermal evaporation. Au NFs were introduced for their catalytic activity in concave-convex nano-configuration. Ag NPs underneath were used for their significant enhancement factor (EF) in surface-enhanced Raman scattering (SERS)-based measurements of analytes of interest. Rhodamine 6G (R6G) was utilized as the Raman-probe to evaluate the SERS sensitivity of AOA. The SERS EF of AOA is ~37 times than that of Au NPs. Using reduction of 4-nitrothiophenol (4-NTP) by sodium borohydride (NaBH4) as a model reaction, we demonstrated the robust catalytic activity of AOA as well as its capacity to continuously monitor via SERS the disappearance of reactant 4-NTP, emergence and disappearance of intermediate 4, 4’-DMAB, and the appearance of product 4-ATP throughout the reduction process in real-time and in situ.

Gelatin as an ecofriendly natural polymer for preparing colloidal silver@gold nanobranches

2016 ◽  
Vol 5 (5) ◽  
Author(s):  
Phuong Phong Nguyen Thi ◽  
Dai Hai Nguyen
Keyword(s):  
Ph Value ◽  
Component Ratio ◽  
X Ray Diffraction ◽  
Ag Nps ◽  
Au Nps ◽  
X Ray ◽  
Transmission Electron ◽  
Uv Visible ◽  
The Stability ◽  
Maximum Absorption Wavelength

AbstractWe report star-shaped silver@gold (Ag@Au) nanoparticles (NPs) in gelatin suspensions for the purpose of enhancing the stability of Ag@Au NPs. In this case, Ag NPs were designed as nucleating agents, whereas gelatin was used as a protecting agent for Au development. Especially, variable gelatin concentrations were also prepared to explore its ability to increase the stability of Ag@Au NPs. The obtained samples were then characterized by UV-visible spectroscopy, transmission electron spectroscopy (TEM), X-ray diffraction, and Fourier transform infrared spectroscopy. The maximum absorption wavelength of all samples (566–580 nm) indicated that branched Ag@Au@gelatin NPs were successfully synthesized. In addition, our TEM results revealed that the size of branched Ag@Au@gelatin NPs was found to be between 20 and 45 nm as influenced by the component ratio and the pH value. These results can provide valuable insights into the improvement of Ag@Au NP stability in the presence of gelatin.

scholarly journals Raman Signal Enhancement Tunable by Gold-Covered Porous Silicon Films with Different Morphology

Sensors ◽  
2020 ◽  
Vol 20 (19) ◽  
pp. 5634 ◽  
Author(s):  
Svetlana N. Agafilushkina ◽  
Olga Žukovskaja ◽  
Sergey A. Dyakov ◽  
Karina Weber ◽  
Vladimir Sivakov ◽  
...  
Keyword(s):  
Porous Silicon ◽  
Raman Scattering ◽  
Pore Size ◽  
Signal Enhancement ◽  
Raman Signal ◽  
Sers Spectrum ◽  
Internal Diameter ◽  
Au Nps ◽  
Surface Enhanced Raman ◽  
Size And Morphology

The ease of fabrication, large surface area, tunable pore size and morphology as well surface modification capabilities of a porous silicon (PSi) layer make it widely used for sensoric applications. The pore size of a PSi layer can be an important parameter when used as a matrix for creating surface-enhanced Raman scattering (SERS) surfaces. Here, we evaluated the SERS activity of PSi with pores ranging in size from meso to macro, the surface of which was coated with gold nanoparticles (Au NPs). We found that different pore diameters in the PSi layers provide different morphology of the gold coating, from an almost monolayer to 50 nm distance between nanoparticles. Methylene blue (MB) and 4-mercaptopyridine (4-MPy) were used to describe the SERS activity of obtained Au/PSi surfaces. The best Raman signal enhancement was shown when the internal diameter of torus-shaped Au NPs is around 35 nm. To understand the role of plasmonic resonances in the observed SERS spectrum, we performed electromagnetic simulations of Raman scattering intensity as a function of the internal diameter. The results of these simulations are consistent with the obtained experimental data.

scholarly journals Halloysite Nanotubes with Immobilized Plasmonic Nanoparticles for Biophotonic Applications

2021 ◽  
Vol 11 (10) ◽  
pp. 4565
Author(s):  
Anastasiia V. Kornilova ◽  
Sergey M. Novikov ◽  
Galiya A. Kuralbayeva ◽  
Subhra Jana ◽  
Ivan V. Lysenko ◽  
...  
Keyword(s):  
Electric Fields ◽  
Halloysite Nanotubes ◽  
Plasmonic Nanoparticles ◽  
Ag Nps ◽  
Optical Extinction ◽  
Transmission Electron ◽  
Surface Enhanced ◽  
Surface Enhanced Raman ◽  
Enhanced Raman Scattering

Halloysite nanotubes (HNTs) with immobilized gold (Au) and silver (Ag) nanoparticles (NPs) belong to a class of nanocomposite materials whose physical properties and applications depend on the geometry of arrangements of the plasmonic nanoparticles on HNT’ surfaces. We explore HNTs:(Au, Ag)-NPs as potential nano-templates for surface-enhanced Raman scattering (SERS). The structure and plasmonic properties of nanocomposites based on HNTs and Au- and Ag-NPs are studied by means of the transmission electron microscopy and optical spectroscopy. The optical extinction spectra of aqueous suspensions of HNTs:(Au, Ag)-NPs and spatial distributions of the electric fields are simulated, and the simulation results demonstrate the corresponding localized plasmonic resonances and numerous “hot spots” of the electric field nearby those NPs. In vitro experiments reveal an enhancement of the protein SERS in fibroblast cells with added HNTs:Ag-NPs. The observed optical properties and SERS activity of the nanocomposites based on HNTs and plasmonic NPs are promising for their applications in biosensorics and biophotonics.

scholarly journals Rapid formation methods of arrays of randomly distributed Au and Ag nanoparticles, their morphologies and optical characteristics

2021 ◽  
Vol 22 (4) ◽  
pp. 804-810
Author(s):  
V.M. Rubish ◽  
V.K. Kyrylenko ◽  
M.O. Durkot ◽  
L.I. Makar ◽  
M.M. Pop ◽  
...  
Keyword(s):  
Radiation Heating ◽  
Ag Nps ◽  
Rapid Radiation ◽  
Au Nps ◽  
Glass Substrates ◽  
Sers Substrates ◽  
Rapid Formation ◽  
Gold Nps ◽  
Average Size ◽  
Nanoparticle Sizes

By the method of rapid radiation heating (at a speed of 20-25 K/s) of Au and Ag films with a thickness of 4-35 nm to temperatures of 573-693 K in air and in the process of vacuum deposition of silver on heated (up to 700 K at a heating rate of 10 K/s ) glass substrates formed Au and Ag NPs arrays with nanoparticle sizes from several tens to hundreds of nanometers, the position λSPR of which is in the range of 520-597 nm for Au NPs and 424-509 nm for Ag NPs. It is established that the average size of nanoparticles depends on the thickness of gold and silver films and the annealing temperature. The results testify that glass substrates with arrays of randomly distributed gold NPs can be used as effective SERS-substrates for the investigation of Raman spectra of nanosized (50-100 nm) chalcogenide films.

scholarly journals Stabilizing Ag Nanoparticles Using Anatase TiO2 and Cu on Al Surface

2020 ◽  
pp. 22-30
Author(s):  
Masayoshi Kaneko
Keyword(s):  
Ag Nanoparticles ◽  
Au Nanoparticles ◽  
Active Surface ◽  
Anatase Tio2 ◽  
Sers Substrate ◽  
Ag Nps ◽  
Au Nps ◽  
Surface Enhanced ◽  
Surface Enhanced Raman ◽  
Enhanced Raman Scattering

Chemical adsorption of anatase TiO2, silver nanoparticles (Ag NPs), and Cu particles (Cu Ps) on aluminum (Al) surface yielded an active surface-enhanced Raman scattering (SERS) substrate. TiO2 is known to reduce both silver (Ag) and copper (Cu). In an oxidizing environment, Ag NPs remain unoxidized since Cu has a more negative redox potential than Ag. Ag is therefore protected by Cu from getting oxidized. Although Ag NPs exhibit better SERS activity than Au NPs, Ag is relatively easier to oxidize, limiting the development of Ag-based nanomaterials. Therefore, despite the poor SERS activity of Au nanoparticles than that of Ag nanoparticles, Au nanoparticles have been widely used. Herein, the stabilization of Ag nanoparticles by incorporating a reductive process using anatase TiO2 is reported. The fabricated substrates bearing anatase, Ag NPs, and Cu Ps were stable, as seen by Raman spectra, and remained unchanged for more than 2 months.

scholarly journals Optical Characterization of SERS Substrates Based on Porous Au Films Prepared by Pulsed Laser Deposition

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
V. V. Strelchuk ◽  
O. F. Kolomys ◽  
E. B. Kaganovich ◽  
I. M. Krishchenko ◽  
B. O. Golichenko ◽  
...  
Keyword(s):  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Laser Pulses ◽  
Surface Enhanced Raman Spectroscopy ◽  
Laser Deposition ◽  
Porous Films ◽  
Local Surface Plasmon Resonance ◽  
Au Nps ◽  
Sers Substrates ◽  
Surface Enhanced Raman

The SERS (surface enhanced Raman spectroscopy) substrates based on nanocomposite porous films with gold nanoparticles (Au NPs) arrays were formed using the method of the pulsed laser deposition from the back low-energy flux of erosion torch particles on the glass substrate fixed at the target plain. The dependencies of porosity, and morphology of the surface of the film regions located near and far from the torch axis on the laser ablation regime, laser pulses energy density, their number, and argon pressure in the vacuum chamber, were ascertained. The Au NPs arrays with the controllable extinction spectra caused by the local surface plasmon resonance were prepared. The possibility of the formation of SERS substrates for the detection of the Rhodamine 6G molecules with the concentration 10−10 Mol/L with the enhancement factor 4·107was shown.

scholarly journals Robust SERS Platforms Based on Annealed Gold Nanostructures Formed on Ultrafine Glass Substrates for Various (Bio)Applications

Biosensors ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 53 ◽  
Author(s):  
Lan Zhou ◽  
Simone Poggesi ◽  
Giuliocesare Casari Bariani ◽  
Rakesh Mittapalli ◽  
Pierre-Michel Adam ◽  
...  
Keyword(s):  
Surface Enhanced Raman Spectroscopy ◽  
Thin Layers ◽  
Gold Nanostructures ◽  
Hot Plate ◽  
Glass Substrates ◽  
Model Molecule ◽  
Surface Enhanced ◽  
Surface Enhanced Raman ◽  
The Stability ◽  
First Time

In this study, stable gold nanoparticles (AuNPs) are fabricated for the first time on commercial ultrafine glass coverslips coated with gold thin layers (2 nm, 4 nm, 6 nm, and 8 nm) at 25 °C and annealed at high temperatures (350 °C, 450 °C, and 550 °C) on a hot plate for different periods of time. Such gold nanostructured coverslips were systematically tested via surface enhanced Raman spectroscopy (SERS) to identify their spectral performances in the presence of different concentrations of a model molecule, namely 1,2-bis-(4-pyridyl)-ethene (BPE). By using these SERS platforms, it is possible to detect BPE traces (10−12 M) in aqueous solutions in 120 s. The stability of SERS spectra over five weeks of thiol-DNA probe (2 µL) deposited on gold nano-structured coverslip is also reported.

scholarly journals Microstructure and Thermoelectric Properties of (Bi0.48Sb1.52)Te3 Thick Films Prepared with Tape Casting Method

Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 140
Author(s):  
Lichen Liu ◽  
Ziping Cao ◽  
Min Chen ◽  
Jun Jiang
Keyword(s):  
Thermoelectric Properties ◽  
Low Cost ◽  
Thick Films ◽  
Tape Casting ◽  
Casting Process ◽  
Casting Method ◽  
Glass Substrates ◽  
Conductive Films ◽  
Casting Technology

This paper reports the fabrication and characterization of (Bi0.48Sb1.52)Te3 thick films using a tape casting process on glass substrates. A slurry of thermoelectric (Bi0.48Sb1.52)Te3 was developed and cured thick films were annealed in a vacuum chamber at 500–600 °C. The microstructure of these films was analyzed, and the Seebeck coefficient and electric conductivity were tested. It was found that the subsequent annealing process must be carefully designed to achieve good thermoelectric properties of these samples. Conductive films were obtained after annealing and led to acceptable thermoelectric performance. While the properties of these initial materials are not at the level of bulk materials, this work demonstrates that the low-cost tape casting technology is promising for fabricating thermoelectric modules for energy conversion.

scholarly journals Rapid uropathogen identification using surface enhanced Raman spectroscopy active filters

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Simon D. Dryden ◽  
Salzitsa Anastasova ◽  
Giovanni Satta ◽  
Alex J. Thompson ◽  
Daniel R. Leff ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Bacterial Infections ◽  
Surface Enhanced Raman Spectroscopy ◽  
Active Filters ◽  
Raman Signal ◽  
Rapid Diagnostics ◽  
Bacterial Classification ◽  
Surface Enhanced ◽  
Surface Enhanced Raman

AbstractUrinary tract infection is one of the most common bacterial infections leading to increased morbidity, mortality and societal costs. Current diagnostics exacerbate this problem due to an inability to provide timely pathogen identification. Surface enhanced Raman spectroscopy (SERS) has the potential to overcome these issues by providing immediate bacterial classification. To date, achieving accurate classification has required technically complicated processes to capture pathogens, which has precluded the integration of SERS into rapid diagnostics. This work demonstrates that gold-coated membrane filters capture and aggregate bacteria, separating them from urine, while also providing Raman signal enhancement. An optimal gold coating thickness of 50 nm was demonstrated, and the diagnostic performance of the SERS-active filters was assessed using phantom urine infection samples at clinically relevant concentrations (105 CFU/ml). Infected and uninfected (control) samples were identified with an accuracy of 91.1%. Amongst infected samples only, classification of three bacteria (Escherichia coli, Enterococcus faecalis, Klebsiella pneumoniae) was achieved at a rate of 91.6%.

Sign in / Sign up

Export Citation Format

Share Document