scholarly journals Development and Evaluation of Novel Bionanoparticles Loaded with Nanosized Lamotrigine by Using the Novel Isolated Biopolymer from Phaseolus vulgaris Seeds

2020 ◽  
pp. 247-254
Author(s):  
Sushant Kumar ◽  
Nookala Venkala Satheesh Madhav ◽  
Anurag Verma ◽  
Kamla Pathak
Keyword(s):  
Particle Size ◽  
Phaseolus Vulgaris ◽  
Drug Release ◽  
In Vitro Study ◽  
Entrapment Efficiency ◽  
Term Treatment ◽  
Stability Study ◽  
The Novel ◽  
Long Term Treatment

The aim of this research was to isolate and characterize the novel biopolymer from Phaseolus vulgaris seeds and to formulate lamotrigine loaded bionanoparticles using this biomaterial. The biopolymer was isolated by simplified and economical process and analysed for different physico-chemical and spectral properties. The nanosizing of lamotrigine was done by bath sonication method and its particle size in nano-range was screened by UV method. The bionanosuspension loaded with nanosized lamotrigine was prepared by bath sonication for 15 cycles (1cycle equal to 3 minutes). The formulated bionanosuspension loaded with lamotrigine using biopolymer was compared with lamotrigine loaded bionanosuspension by using HPMC.  The bionanosuspension was subjected for pH study, dispersibility study, % entrapment efficiency, nanosizing screening, particle size study and in vitro study for drug release and stability study of formulated bionanosuspension. The best formulation LPVu7 showed up to 90.36 ±0.9% drug release in 36 hours. having t 50% of 17 hours and t80% of  29 hours with r2 value of 0.9927 as compared to release from LSP5 with 92.43±0.68%   having t 50% of 16 hours and t80% of  28 hours with r2 value of 0.9951 in  36 hours. The results reveal that isolated biopolymer may be used as an alternative to synthetic polymer because of its novel inbuilt bioretardant cum biostabilizing properties. The formulated bionanosuspension are feasible for delivering the nanosized lamotrigine in sustained manner for prolonged time for long term treatment of epilepsy.

scholarly journals Formulation and in-vitro evaluation of Glipizide (Anti diabetic drug) Liposphere

2018 ◽  
Vol 8 (6-s) ◽  
pp. 116-119
Author(s):  
Sarika Saini ◽  
Aman Mittal
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
In Vitro Study ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Paraffin Wax ◽  
Drug Content ◽  
Dissolution Apparatus ◽  
Dispersion Technique

Objective- The aim of the present study was to formulate and in- vitro study of glipizide liposphere by using melt dispersion technique. Methods- Glipizide Liposphere system composed of paraffin wax, Stearic acid as lipid phase and sodium lauryl sulphate as surfactant. Glipizide lipospheres were prepared by using melt dispersion technique. Formulation of Glipizide was evaluated such as organoleptic properties, particle size, drug content, entrapment efficiency in-vitro study and stability of the lipospheres. Result- The formation of glipizide lipospheres by using melt dispersion technique was done successfully. All the formulations have off- white in colour, characteristic odour and spherical shape. The formulation A4 has particle size 19.65 μm, drug content 84.93 %, entrapment efficiency 80.75 % and the percentage drug release was carried out by using USP type 2 dissolution apparatus in 6.8 pH phosphate buffer solution and drug release of glipizide lipospheres within 12 hrs was found to be 74.06 %.stability study of glipizide lipospheres revealed that the formulation was stable at 5oC ± 3oC. Keywords- Lipospheres, Glipizide, Paraffin wax, Melt dispersion method, Dissolution Apparatus, Stability study

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

Design and Evaluation of Long Acting Biodegradable PLGA Microspheres for Ocular Drug Delivery

2019 ◽  
Vol 10 ◽  
Author(s):  
Anjali Pandya ◽  
Rajani Athawale ◽  
Durga Puro ◽  
Geeta Bhagwat
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Degradation Products ◽  
Ex Vivo ◽  
Research Work ◽  
Entrapment Efficiency ◽  
Rational Approach ◽  
Plga Microspheres ◽  
Long Acting

Background: The research work involves development of PLGA biodegradable microspheres loaded with dexamethasome for intraocular delivery. Objective: To design and evaluate long acting PLGA microspheres for ocular delivery of dexamethasone. Method: Present formulation involves the development of long acting dexamethasone loaded microspheres composed of a biodegradable controlled release polymer, Poly(D, L- lactide-co-glycolide) (PLGA), for the treatment of posterior segment eye disorders intravitreally. PLGA with monomer ratio of 50:50 of lactic acid to glycolic acid was used to achieve a drug release up to 45 days. Quality by Design approach was utilized for designing the experiments. Single emulsion solvent evaporation technique along with high pressure homogenization was used to facilitate formation of microspheres. Results: Particle size evaluation, drug content and drug entrapment efficiency were determined for the microspheres. Particle size and morphology was observed using Field Emission Gun-Scanning Electron Microscopy (FEG-SEM) and microspheres were in the size range of 1-5 μm. Assessment of drug release was done using in vitro studies and transretinal permeation was observed by ex vivo studies using goat retinal tissues. Conclusion: Considering the dire need for prolonged therapeutic effect in diseases of the posterior eye, an intravitreal long acting formulation was designed. Use of biodegradable polymer with biocompatible degradation products was a rational approach to achieve this aim. Outcome from present research shows that developed microspheres would provide a long acting drug profile and reduce the frequency of administration thereby improving patient compliance.

DESIGN, CHARACTERIZATION AND EVALUATION OF MUCOADHESIVE NASAL IN SITU GELLING FORMULATIONS OF VENLAFAXINE HYDROCHLORIDE FOR BRAIN TARGETTING

INDIAN DRUGS ◽  
2016 ◽  
Vol 53 (01) ◽  
pp. 25-31
Author(s):  
M Priyanka ◽  
◽  
F. S. Dasankoppa ◽  
H. N Sholapur ◽  
NGN Swamy ◽  
...  
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Linear Regression Analysis ◽  
Entrapment Efficiency ◽  
Stability Study ◽  
Drug Content ◽  
Venlafaxine Hydrochloride ◽  
In Situ Gelling

The poor bioavailability and the therapeutic effectiveness exhibited by the anti-depressant venlafaxine hydrochloride on oral administration is overcome by the use of ion-activated gel forming systems that are instilled as drops; these undergo gelation in the nasal cavity. The present study describes the design, characterization and evaluation of mucoadhesive nasal in situ gelling drug delivery of venlafaxine hydrochloride using different polymers like sodium alginate, HPMC and pectin in various concentrations. DSC studies revealed compatibility of the drug and excipients used. The in situ gels were characterized for physicochemical parameters, gelling ability, rheological studies, drug content, drug entrapment efficiency, in vitro mucoadhesive strength, water holding capacity, gel expansion coefficient and in vitro drug release studies. The amount of polymer blends was optimized using 23 full factorial design. The influence of experimental factors on percentage cumulative drug release at the end of 2 and 8 hours were investigated to get optimized formulation. The responses were analyzed using ANOVA and polynomial equation was generated for each response using multiple linear regression analysis. Optimized formulation, F9, containing 1.98% w/V sodium alginate, 0.64% w/V hydroxylpropyl methylcellulose, 0.99% w/V pectin showed percentage cumulative drug release of 19.33 and 80.44 at the end of 2 and 8 hours, respectively, which were close to the predicted values. The optimized formulation was subjected to stability study for three months at 300C /75% RH. The stability study revealed no significant change in pH, drug content and viscosity. Thus, venlafaxine hydrochloride nasal mucoadhesive in situ gel could be successfully formulated to improve bioavailability and to target the brain.

scholarly journals EVALUATION OF STABILITY OF ROPINIROLE HYDROCHLORIDE AND PRAMIPEXOLE DIHYDROCHLORIDE MICROSPHERES AT ACCELERATED CONDITION

2018 ◽  
Vol 10 (4) ◽  
pp. 82
Author(s):  
Koyel Kar ◽  
R. N. Pal ◽  
Gouranga Nandi
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Surface Morphology ◽  
Shelf Life ◽  
Stability Study ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Ropinirole Hydrochloride ◽  
Pramipexole Dihydrochloride

Objective: The objective of the present work was to conduct accelerated stability study as per international council for harmonisation (ICH) guidelines and to establish shelf life of controlled release dosage form of ropinirole hydrochloride and pramipexole dihydrochloride microspheres for a period of 6 mo.Methods: Most optimized batch of ropinirole hydrochloride and pramipexole dihydrochloride (F12 and M12 respectively) were selected and subjected to exhaustive stability testing by keeping the sample in stability oven for a period of 3 and 6 mo. Various parameters like surface morphology, particle size, drug content, in vitro drug release and shelf life were evaluated at 3 and 6 mo period. The surface morphology of the formulated microspheres was determined by scanning electron microscopy (SEM). The particle size of the microspheres was estimated by optical microscopy method. The drug content was assayed by the help of ultra-violet spectrophotometer (UV). The in vitro drug release was performed by using Paddle II type dissolution apparatus and the filtrate was analyzed by UV spectrophotometer. The shelf life of the optimized microspheres was calculated by using the rate constant value of the zero-order reaction.Results: A minor change was recorded in average particle size of F12 and M12 microspheres after storage for 6 mo. For F12 and M12, initially the particle size was 130.00 µm and 128.92 µm respectively and after 6 mo it was found to be 130.92 µm and 128.99 µm respectively. There was no change in surface morphology of F12 and M12 microspheres after 6 mo of storage. The shape of microspheres remained spherical and smooth after 6 mo. An insignificant difference of drug content was recorded after 6 mo compared to the freshly prepared formulation. For F12 and M12, 94.50% and 93.77% of the drug was present initially and after 6 mo 94.45% and 93.72% of the drug was recorded. In vitro drug release was recorded after 6 mo for F12 and M12. Initially, 97.99% and 97.69% of the drug was released till 14th hour respectively for F12 and M12. After 6 mo, 98.23% and 97.99% of the drug was released respectively. The percentage residual drug content revealed that the degradation of microspheres was low. Considering the initial percentage residual drug content as 100%, 99.94% of the drug was recorded for both F12 and M12. The shelf life for F12 and M12 was found to be 10 y 52 d and 10 y 70 d respectively which were determined by the zero-order kinetic equation.Conclusion: A more or less similar surface morphology, particle size, drug content and percent of drug release before and after stability study confirmed the stability of F12 and M12 microspheres after storage for 6 mo and prove the efficacy of the microspheres in the site-specific delivery of drugs in Parkinson’s disease.

scholarly journals FORMULATION, OPTIMIZATION AND IN VITRO EVALUATION OF 5-FLUOROURACIL LOADED LIQUORICE CRUDE PROTEIN NANOPARTICLES FOR SUSTAINED DRUG DELIVERY USING BOX-BEHNKEN DESIGN

2021 ◽  
pp. 216-226
Author(s):  
GEETHA V. S. ◽  
MALARKODI VELRAJ
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Crude Protein ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Box Behnken Design ◽  
Sustained Drug Delivery ◽  
Drug Loading Efficiency

Objective: To formulate, optimize and evaluate 5-fluorouracil loaded liquorice crude protein nanoparticles for sustained drug delivery using Box-Behnken design. Methods: 5-fluorouracil (5-FU) loaded liquorice crude protein (LCP) nanoparticles were prepared by desolvation method using ethanol-water (1:2 ratio), Tween-80 (2%v/v) as stabilizing agent and gluteraldehyde (8% v/v) as cross linking agent. The optimization of prepared nanoparticles was carried out using Box-Behnken design with 3 factors 2 levels and 3 responses. The independent variables were A)5-FU concentration B)LCP concentration and C) sonication time while the responses were R1) Drug entrapment efficiency R2) Drug loading efficiency and R3) Particle size. The correlation between factors and responses were studied through response surface plots and mathematical equations. The nanoparticles were evaluated for FTIR, physicochemical properties like particle size and zeta potential by Photon correlation spectroscopy (PCS) and surface morphology by TEM. The entrapment efficiency, drug loading efficiency and in vitro drug release studies in PBS pH 7.4 (24 h) were carried out. The observed values were found to be in close agreement with the predicted value obtained from the optimization process. Results: 5-fluorouracil loaded LCP nanoparticles were prepared by desolvation method, the optimization was carried out by Box-Behnken design and the final formulation was evaluated for particle size (301.1 nm), zeta-potential (-25.8mV), PDI(0.226), with entrapment efficiency (64.07%), drug loading efficiency (28.54%), in vitro drug release (65.2% in 24 h) respectively. The formulated nanoparticles show Higuchi model drug release kinetics with sustained drug delivery for 24 h in pH7.4 buffer. Conclusion: The results were proved to be the most valuable for the sustained delivery of 5-Fluorouracil using liquorice crude protein as carrier. 5-FU–LCP nanoparticles were prepared using Tween-80 as stabilizing agent and gluteraldehyde as cross-linking agent to possess ideal sustained drug release characteristics.

scholarly journals DEVELOPMENT OF RITONAVIR LOADED NANOPARTICLES: IN VITRO AND IN VIVO CHARACTERIZATION

2018 ◽  
Vol 11 (3) ◽  
pp. 284
Author(s):  
Pravin S Patil ◽  
Shashikant C Dhawale
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Dissolution Rate ◽  
Drug Carrier ◽  
Entrapment Efficiency ◽  
Significant Rise ◽  
Scanning Calorimetry ◽  
In Vitro Drug Release

 Objective: The purpose of the present investigation was to develop a nanosuspension to improve dissolution rate and oral bioavailability of ritonavir.Methods: Extended-release ritonavir loaded nanoparticles were prepared using the polymeric system by nanoprecipitation technique. Further, the effect of Eudragit RL100 (polymeric matrix) and polyvinyl alcohol (surfactant) was investigated on particle size and distribution, drug content, entrapment efficiency, and in vitro drug release from nanosuspension where a strong influence of polymeric contents was observed. Drug-excipient compatibility and amorphous nature of drug in prepared nanoparticles were confirmed by Fourier transform infrared spectroscopy, differential scanning calorimetry, and powder X-ray diffraction studies, respectively.Results: Hydrophobic portions of Eudragit RL100 could result in enhanced encapsulation efficiency. However, increase in polymer and surfactant contents lead to enlarged particle size proportionately as confirmed by transmission electron microscopy. Nanosuspension showed a significant rise in dissolution rate with complete in vitro drug release as well as higher bioavailability in rats compared to the pure drug.Conclusion: The nanoprecipitation technique used in present research could be further explored for the development of different antiretroviral drug carrier therapeutics.

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

scholarly journals Formulation, Optimization, and Characterization of Repaglinide Loaded Nanocrystal for Diabetes Therapy

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Gajanan Shinde ◽  
Mitesh Patel ◽  
Manan Mehta ◽  
Rajesh Kesarla ◽  
Ganesh Bangale
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Polymer Concentration ◽  
Study Data ◽  
Stability Study ◽  
Diabetes Therapy ◽  
Peg 4000 ◽  
Number Of Cycles

The aim of the present investigation was to formulate and characterize nanocrystal formulation of Repaglinide for diabetes therapy. Formulation was done by high pressure homogenization. HPH pressure and cycles range were screened by preliminary batches (T1 and T2). 5, 8, and 10 cycles and 500 to 1500 bar pressure range had kept for further investigation. Taguchi design was used to optimize type of polymer, % polymer concentration, number of cycles, and HPH pressure for nanocrystal formulation. Formulations were characterized for particle size, zeta potential, and in vitro drug release. Optimized formulation (NC 3) showed particle size of 187 nm, zeta potential of −29.4 mv, and % drug release of 80.58% and it was used for further study. Data analysis proved significant effects of factors on responses. Polydispersity index (PDI) Analysis of optimized formulation were found to be 0.248. SEM showed nanocrystal aggregation of drug, may be due to water removal process. DSC showed slight change in crystallinity, may be due to the presence of PEG 4000. Stability study was carried out for 3 months. It indicated no significant change in particle size and zeta potential. However, further studies in higher animals and human being need to be performed before this formulation can be commercially exploited.

scholarly journals Development and In-Vitro Evaluation of Budesonide Mucoadhesive Microspherefor Pulmonary Drug Delivery

2021 ◽  
Vol 11 (2-S) ◽  
pp. 76-81
Author(s):  
Jddtadmin Journal
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Chemical Interaction ◽  
Entrapment Efficiency ◽  
Pulmonary Drug Delivery ◽  
Sustained Drug Release ◽  
In Vitro Drug Release ◽  
Drug Entrapment Efficiency

Thepurpose of the study was to develop and evaluatemucoadhesive microspheres of Budesonide for pulmonary drug delivery systemhaving prolonged residence time and sustained drug release. Microspheres were prepared by emulsificationsolvent evaporation technique using HPMC, carbopol as polymers in varying ratios. The microspheres were evaluated for its percentage yield, drug entrapment efficiency, particle size and shape, in vitro mucoadhesion study and in vitro drug release studies.The FTIR studies revealed no chemical interaction between the drug molecule and polymers and found that drug was compatible with used polymer. The mucoadhesive microspheres showed particle size, drug entrapment efficiency and yield in the ranges of148 - 164 μm, 68.0 - 85.0%and67.52 - 87.25% respectively. In vitro drug release and mucoadhesion study confirms thatformulationF5 was the best formulation as it releases 81.8 % at the end of 12 hr. in controlled manner and percentage mucoadhesion of 75.2 % after 10 hr. This confirms the developed budesonidemucoadhesive microspheres are promising for pulmonary drug delivery system.   Keywords: Budesonide, Mucoadhesion, Microspheres, Drug entrapment efficiency.

Sign in / Sign up

Export Citation Format

Share Document