scholarly journals PENGARUH PENYUSUNAN POLARISASI PADA SISTEM ANTENA MIMO TERHADAP KAPASITAS KANAL

2020 ◽  
Vol 5 (1) ◽  
pp. 13
Author(s):  
Abdurrahman Rizki ◽  
Alloysius Adya Pramudita ◽  
Trasma Yunita
Keyword(s):  
Circular Polarization ◽  
Channel Capacity ◽  
Mimo System ◽  
Signal To Noise Ratio ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Mimo Antenna ◽  
Left Hand ◽  
Multiple Input ◽  
Input Multiple Output

Multiple Input Multiple Output (MIMO) system is a technology that has the potential to be developed to increase channel capacity. The increase in channel capacity in the MIMO system is not only determined by the number of antennas, but is determined by the characteristics and arrangement of the antenna concept. This study identifies the effect of circular polarization on the MIMO antenna system on channel capacity. Co-polarization consists of a Left Hand Circular Polarization (LHCP) and Right Hand Circular Polarization (RHCP) configuration, while cross-polarization consists of an RHCP-LHCP configuration. The co-polarization of the antenna with the LHCP configuration results in an estimated channel capacity of 11,578 bps / Hz when it is at the lowest Signal to Noise Ratio (SNR) is 5 dB

scholarly journals Mutual Coupling Reduction of E-Shaped MIMO Antenna with Matrix of C-Shaped Resonators

2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Raghad Ghalib Saadallah Alsultan ◽  
Gölge Ögücü Yetkin
Keyword(s):  
Mutual Coupling ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Surface Current ◽  
Antenna System ◽  
Total Efficiency ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Parallel Arrangement ◽  
Input Multiple Output

E-shaped multiple-input-multiple-output (MIMO) microstrip antenna systems operating in WLAN and WiMAX bands (between 5 and 7.5 GHz) are proposed with enhanced isolation features. The systems are comprised of two antennas that are placed parallel and orthogonal to each other, respectively. According to the simulation results, the operating frequency of the MIMO antenna system is 6.3 GHz, and mutual coupling is below −18 dB in a parallel arrangement, whereas they are 6.4 GHz and −25 dB, respectively, in the orthogonal arrangement. The 2 × 3 matrix of C-shaped resonator (CSR) is proposed and placed between the antenna elements over the substrate, to reduce the mutual coupling and enhance the isolation between the antennas. More than 30 dB isolation between the array elements is achieved at the resonant frequency for both of the configurations. The essential parameters of the MIMO array such as mutual coupling, surface current distribution, envelop correlation coefficient (ECC), diversity gain (DG), and the total efficiency have been simulated to verify the reliability and the validity of the MIMO system in both parallel and orthogonal configurations. The experimental results are also provided and compared for the mutual coupling with simulated results. An adequate match between the measured and simulated results is achieved.

scholarly journals Capacity Analysis of Multiple-input-multiple-output System Over Rayleigh and Rician Fading Channel

2019 ◽  
Vol 3 (2) ◽  
pp. 70-74
Author(s):  
Yazen Saifuldeen Mahmood ◽  
Ghassan Amanuel Qasmarrogy
Keyword(s):  
Channel Capacity ◽  
Transmission Rate ◽  
Mimo System ◽  
Signal To Noise Ratio ◽  
Multiple Input Multiple Output ◽  
Ergodic Capacity ◽  
Rician Fading ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Water Filling Algorithm

This paper aims to analyze the channel capacity in terms of spectral efficiency of a multiple-input-multiple-output (MIMO) system when channel state information (CSI) is known using water-filling algorithm and unknown at the transmitter side which it has been shown that the knowledge of the CSI at the transmitter enhancing the performance, the random Rayleigh and Rician channel models are assumed. Ergodic capacity and outage probability are the most channel capacity definitions which are investigated in this study. MATLAB code is devised to simulate the capacity of MIMO system for different numbers of antenna nodes versus different signal-to-noise ratio (SNR) values. In addition, the outage capacity probabilities for vary transmission rate and SNR are discussed.

scholarly journals Muli-UWB Antenna System Design for 5G Wireless Applications with Diversity

2021 ◽  
Vol 2021 ◽  
pp. 1-18
Author(s):  
Marwa Daghari ◽  
Chaker Essid ◽  
Hedi Sakli
Keyword(s):  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Total Efficiency ◽  
Defected Ground Structure ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Wireless Applications ◽  
Multiple Input ◽  
Input Multiple Output

In this paper, we propose a compact Multiple Input Multiple Output (MIMO) antenna system with high isolation for wireless applications in 5G connected devices. This MIMO antenna system with the size of 92 × 88   m m 2 consists of two elliptical antennas symmetrically arranged next to each other. Two decoupling methods which are neutralization and Defected Ground Structure (DGS) are applied to ensure diversity of the proposed MIMO antenna. The single and MIMO antennas are simulated and analyzed then fabricated and measured. A good agreement between measurements and simulations is obtained. These configurations, dedicated to covering the 3.4 GHz band -3.8 GHz, have shown very satisfactory performances more than -30 dB in terms of reduction of mutual coupling between the antennas constituting our system. MIMO diversity parameters, such as Envelope Correlation (ECC), Diversity Gain (DG), and total efficiency, are also studied for each proposed MIMO system. Thus, results demonstrate that our two proposed antenna configurations are very suitable for 5G MIMO applications.

scholarly journals Mutual Coupling Reduction of DRA for MIMO Applications

2019 ◽  
Vol 8 (1) ◽  
pp. 75-81
Author(s):  
N. Al Shalaby ◽  
S. G. El-Sherbiny
Keyword(s):  
Mutual Coupling ◽  
Dielectric Material ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Element Method

In this paper, A multiple input Multiple Output (MIMO) antenna using two Square Dielectric Resonators (SDRs) is introduced. The mutual coupling between the two SDRAs is reduced using two different methods; the first method is based on splitting a spiral slot in the ground plane, then filling the slot with dielectric material, "E.=2.2". The second method is based on inserting a copper parasitic element, having the same shape of the splitted Spiral, between the two SDRAs.  The effect of replacing the copper parasitic element with Carbon nanotubes (CNTs) parasitic element "SOC12 doped long-MWCNT BP" is also studied. The antenna system is designed to operate at 6 GHz. The analysis and simulations are carried out using finite element method (FEM). The defected ground plane method gives a maximum isolation of l8dB at element spacing of 30mm (0.6λo), whereas the parasitic element method gives a maximum isolation of 42.5dB at the same element spacing.

scholarly journals Modified U-Shaped Resonator as Decoupling Structure in MIMO Antenna

Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1321
Author(s):  
Amjad Iqbal ◽  
Ahsan Altaf ◽  
Mujeeb Abdullah ◽  
Mohammad Alibakhshikenari ◽  
Ernesto Limiti ◽  
...  
Keyword(s):  
Multiple Input Multiple Output ◽  
Equivalent Circuit Model ◽  
Separation Distance ◽  
Antenna System ◽  
Parametric Modelling ◽  
Mimo Antenna ◽  
Antenna Performance ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Simple Assembly

This paper presents an isolation enhancement of two closely packed multiple-input multiple-output (MIMO) antenna system using a modified U-shaped resonator. The modified U-shaped resonator is placed between two closely packed radiating elements resonating at 5.4 GHz with an edge to edge separation distance of 5.82 mm (λ∘/10). Through careful adjustment of parametric modelling, the isolation level of −23 dB among the densely packed elements is achieved. The coupling behaviour of the MIMO elements is analysed by accurately designing the equivalent circuit model in each step. The antenna performance is realized in the presence and absence of decoupling structure, and the results shows negligible effects on the antenna performance apart from mutual coupling. The simple assembly of the proposed modified U-shaped isolating structure makes it useful for several linked applications. The proposed decoupling structure is compact in nature, suppress the undesirable coupling generated by surface wave and nearby fields, and is easy to fabricate.

scholarly journals Design of a compact hexagonal structured dual band MIMO antenna using orthogonal polarization for WLAN and satellite applications

2019 ◽  
Vol 9 (5) ◽  
pp. 4217
Author(s):  
Aziz Dkiouak ◽  
Mohssine El Ouahabi ◽  
Alia Zakriti ◽  
Mohsine Khalladi ◽  
Aicha Mchbal
Keyword(s):  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Dual Band ◽  
Orthogonal Polarization ◽  
Mimo Antenna ◽  
X Band ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Satellite Applications ◽  
Strip Lines

In this paper, a compact dual band multiple-input multiple-output (MIMO) antenna system for WLAN and X-band satellite applications (2.4/9.8 GHz respectively) is proposed. On the top face of the substrate, two antenna elements with a size of 20 × 24 mm2 are placed side by side and fed with matched orthogonal micro-strip lines. The two antenna elements have orthogonal polarization which can reduce the mutual coupling between its ports. The designed antenna system is fabricated and measured to validate the simulation results. The impedance bandwidths are about 370 MHz (2.19 to 2.56 GHz) and 630 MHz (9.44 to 10.07 GHz), while the obtained isolation is greater than 14 dB at the operating bands. Furthermore, the envelope correlation is less than 0.052 and 0.008 at 2.4 and 9.8 GHz, respectively. Hence the diversity gain is higher than 9.98 in the frequency bands of interest.

A miniaturized UWB-MIMO antenna with quadruple band-notched characteristics

2018 ◽  
Vol 10 (8) ◽  
pp. 948-955 ◽  
Author(s):  
Ling Wu ◽  
Yingqing Xia ◽  
Xia Cao ◽  
Zhengtao Xu
Keyword(s):  
Frequency Band ◽  
Satellite Communication ◽  
Mimo System ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Uwb Applications

AbstractA simple multiple-input-multiple-output (MIMO) antenna with quad-band-notched characteristics for ultra-wideband (UWB) system is proposed and tested in the article. Based on two similar radiators, the UWB-MIMO system only occupies 22 mm × 28 mm. By etching an inverted L-like meander slot, two inverted L-shaped slots, and adding a C-shaped stub beside the feeding line, four notched bands are realized (3.25–3.6, 5.05–5.48, 5.6–6, and 7.8–8.4 GHz) to suppress interference from WiMAX, lower WLAN, upper WLAN, and uplink of X-band satellite communication system. With a T-like stub extruding from the ground plane, port isolation is effectively improved. The results show that the antenna covers 3.1–10.6 GHz UWB frequency band except four rejected bands and has high isolation of better than −20 dB over most of the frequency band. Moreover, envelope correlation coefficient and good radiation patterns also prove that the introduced antenna is suitable for UWB applications.

A Frequency Reconfigurable MIMO Antenna System for Cognitive Radio Applications

Frequenz ◽  
2017 ◽  
Vol 71 (11-12) ◽  
Author(s):  
A. Raza ◽  
Muhammad U. Khan ◽  
Farooq A. Tahir
Keyword(s):  
Patch Antenna ◽  
Reverse Bias ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Reverse Bias Voltage ◽  
Frequency Sweep ◽  
Mimo Antenna ◽  
Varactor Diodes ◽  
Multiple Input ◽  
Input Multiple Output

AbstractIn this paper, a two element frequency reconfigurable multiple-input-multiple-output (MIMO) antenna system is presented. The proposed antenna consists of miniaturized patch antenna elements, loaded with varactor diodes to achieve frequency reconfigurability. The antenna has bandwidth of 30 MHz and provides a smooth frequency sweep from 2.12 GHz to 2.4 GHz by varying the reverse bias voltage of varactor diode. The antenna is designed on an FR4 substrate and occupies a space of 50×100 × 0.8 mm

Compact UWB–MIMO antenna with quad-band-notched characteristic

2016 ◽  
Vol 9 (5) ◽  
pp. 1147-1153 ◽  
Author(s):  
Ling Wu ◽  
Yingqing Xia
Keyword(s):  
Correlation Coefficient ◽  
Radiation Pattern ◽  
Mimo System ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Mimo Antenna ◽  
X Band ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Better Than

With quad-band-notched characteristic, a compact ultrawideband (UWB) multiple-input-multiple-output (MIMO) antenna is introduced in the paper. The UWB–MIMO system has two similar monopole elements and occupies 30 × 45 mm2. By inserting two L-shaped slots, CSRR and C-shaped stubs, four notched bands are achieved (3.25–3.9, 5.11–5.35, 5.5–6.06, and 7.18–7.88 GHz) to filter WiMAX, lower WLAN, upper WLAN, and X-band. Meanwhile, the isolation is obviously enhanced with three metal strips on the ground plane. Results indicate that the antenna covers UWB frequency band of 3.1 – 10.6 GHz except four rejected bands, isolation of better than −18 dB, envelope correlation coefficient of <0.02, and good radiation pattern, thus making it useful for UWB systems.

Reduced Complexity FSD Algorithm for MIMO Detection

2012 ◽  
Vol 195-196 ◽  
pp. 259-264
Author(s):  
Xin Yu Mao ◽  
Shu Bo Ren ◽  
Hai Ge Xiang
Keyword(s):  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Sphere Decoding ◽  
Mimo Detection ◽  
Time Simulation ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Simulation Results ◽  
High Order Modulation

Detection is a major challenge for the utilization of multiple-input multiple-output (MIMO) system. Even the fixed sphere decoding (FSD), which is known for its simplicity in calculation, requests too much computation in high order modulation and large number antenna system especially for mobile battery-operated devices. In this paper, a reduced FSD algorithm is proposed to simplify the calculation complexity of the FSD while maintaining the performance at the same time. Simulation results in a 4×4, 16-QAM system show that up to 89% calculation can be saved while the performance drop is less than 0.1dB when SNR=24.

Sign in / Sign up

Export Citation Format

Share Document