scholarly journals Muli-UWB Antenna System Design for 5G Wireless Applications with Diversity

2021 ◽  
Vol 2021 ◽  
pp. 1-18
Author(s):  
Marwa Daghari ◽  
Chaker Essid ◽  
Hedi Sakli
Keyword(s):  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Total Efficiency ◽  
Defected Ground Structure ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Wireless Applications ◽  
Multiple Input ◽  
Input Multiple Output

In this paper, we propose a compact Multiple Input Multiple Output (MIMO) antenna system with high isolation for wireless applications in 5G connected devices. This MIMO antenna system with the size of 92 × 88   m m 2 consists of two elliptical antennas symmetrically arranged next to each other. Two decoupling methods which are neutralization and Defected Ground Structure (DGS) are applied to ensure diversity of the proposed MIMO antenna. The single and MIMO antennas are simulated and analyzed then fabricated and measured. A good agreement between measurements and simulations is obtained. These configurations, dedicated to covering the 3.4 GHz band -3.8 GHz, have shown very satisfactory performances more than -30 dB in terms of reduction of mutual coupling between the antennas constituting our system. MIMO diversity parameters, such as Envelope Correlation (ECC), Diversity Gain (DG), and total efficiency, are also studied for each proposed MIMO system. Thus, results demonstrate that our two proposed antenna configurations are very suitable for 5G MIMO applications.

scholarly journals Mutual Coupling Reduction of E-Shaped MIMO Antenna with Matrix of C-Shaped Resonators

2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Raghad Ghalib Saadallah Alsultan ◽  
Gölge Ögücü Yetkin
Keyword(s):  
Mutual Coupling ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Surface Current ◽  
Antenna System ◽  
Total Efficiency ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Parallel Arrangement ◽  
Input Multiple Output

E-shaped multiple-input-multiple-output (MIMO) microstrip antenna systems operating in WLAN and WiMAX bands (between 5 and 7.5 GHz) are proposed with enhanced isolation features. The systems are comprised of two antennas that are placed parallel and orthogonal to each other, respectively. According to the simulation results, the operating frequency of the MIMO antenna system is 6.3 GHz, and mutual coupling is below −18 dB in a parallel arrangement, whereas they are 6.4 GHz and −25 dB, respectively, in the orthogonal arrangement. The 2 × 3 matrix of C-shaped resonator (CSR) is proposed and placed between the antenna elements over the substrate, to reduce the mutual coupling and enhance the isolation between the antennas. More than 30 dB isolation between the array elements is achieved at the resonant frequency for both of the configurations. The essential parameters of the MIMO array such as mutual coupling, surface current distribution, envelop correlation coefficient (ECC), diversity gain (DG), and the total efficiency have been simulated to verify the reliability and the validity of the MIMO system in both parallel and orthogonal configurations. The experimental results are also provided and compared for the mutual coupling with simulated results. An adequate match between the measured and simulated results is achieved.

scholarly journals Design Of Enhanced Bandwidth Of Dual Element MIMO Antenna For Wireless Applications

2021 ◽  
Vol 12 (6) ◽  
pp. 1030-1036
Author(s):  
B Shruthi, Et. al.
Keyword(s):  
Multiple Input Multiple Output ◽  
Frequency Range ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Broad Bandwidth ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
High Isolation ◽  
Multiple Input ◽  
Input Multiple Output

A multiple-input-multiple-output lightweight printed ultrawideband antenna among a dimension about 40×50mm2to minimise the coupling between these two antennas, the proposed antenna with a quarter circular radiating patch, with defected ground structure is designed. The antenna developed by MIMO is highly isolated, stronger than -15dB. In the working band, from 2.67GHz to 14GHz. The simulation indicates that the proposed MIMO antenna will balance the complete enhanced band with a broad bandwidth by making use of CST. It operates at 5.83GHz, 8.07GHz, 12.28GHz and bandwidth tends to cover the ultrawideband range. UWB band and high isolation, that assemblesit perfect for any application of wireless modules in the UWB range, in order to minimise coupling. For indoor applications and wireless applications these frequency range is used.

scholarly journals Dual Zeroth-Order Resonant USB Dongle Antennas for 4G MIMO Wireless Communications

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Yan Shi ◽  
Lu Zhang ◽  
Chang-Hong Liang
Keyword(s):  
Wireless Communications ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Total Efficiency ◽  
Zeroth Order ◽  
Mimo Antenna ◽  
Order Resonance ◽  
Measurement Results ◽  
Multiple Input ◽  
Input Multiple Output

A multiband multiple-input multiple-output (MIMO) antenna system consisting of two antenna elements has been proposed for 4G USB dongle application. The designed MIMO antenna system with a compact volume of 25 mm × 30 mm × 3.5 mm operates in two zeroth-order resonance (ZOR) modes to cover the LTE band 13 (746–787 MHz), GSM850/900 (824–960 MHz), and LTE band 7 (2500–2690 MHz) simultaneously. A pair of L-shaped parasitic strips and an etching slot on the ground are employed to achieve good isolation between two elements. Measurement results show that proposed MIMO antenna system has total efficiency over 40% across the operation band and isolation less than −8 dB at the lower band and −16 dB at the upper band, respectively.

scholarly journals PENGARUH PENYUSUNAN POLARISASI PADA SISTEM ANTENA MIMO TERHADAP KAPASITAS KANAL

2020 ◽  
Vol 5 (1) ◽  
pp. 13
Author(s):  
Abdurrahman Rizki ◽  
Alloysius Adya Pramudita ◽  
Trasma Yunita
Keyword(s):  
Circular Polarization ◽  
Channel Capacity ◽  
Mimo System ◽  
Signal To Noise Ratio ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Mimo Antenna ◽  
Left Hand ◽  
Multiple Input ◽  
Input Multiple Output

Multiple Input Multiple Output (MIMO) system is a technology that has the potential to be developed to increase channel capacity. The increase in channel capacity in the MIMO system is not only determined by the number of antennas, but is determined by the characteristics and arrangement of the antenna concept. This study identifies the effect of circular polarization on the MIMO antenna system on channel capacity. Co-polarization consists of a Left Hand Circular Polarization (LHCP) and Right Hand Circular Polarization (RHCP) configuration, while cross-polarization consists of an RHCP-LHCP configuration. The co-polarization of the antenna with the LHCP configuration results in an estimated channel capacity of 11,578 bps / Hz when it is at the lowest Signal to Noise Ratio (SNR) is 5 dB

Compact MIMO antenna with optimized mutual coupling reduction using DGS

2013 ◽  
Vol 6 (2) ◽  
pp. 173-180 ◽  
Author(s):  
Ahmed A. Ibrahim ◽  
Mahmoud A. Abdalla ◽  
Adel B. Abdel-Rahman ◽  
Hesham F. A. Hamed
Keyword(s):  
Mutual Coupling ◽  
Multiple Input Multiple Output ◽  
Patch Antennas ◽  
Defected Ground Structure ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
Microstrip Patch Antennas ◽  
Microstrip Patch ◽  
Multiple Input ◽  
Input Multiple Output

A design of low mutual coupling between two microstrip patch antennas for multi input multi output antenna is presented. The two antenna elements operate at 5.8 GHz for wireless applications. The reduction of mutual coupling between the antenna elements is achieved by using a defected ground structure (DGS). The DGS is inserted between the microstrip patch antenna elements to limit the surface waves between them. The separation between the edges of the two elements has been achieved to be only 0.058λ0. The analysis of the correlation coefficient, diversity gain and total active reflection coefficient is presented to validate the performance of the multiple-input–multiple-output (MIMO) antenna. The isolation of the proposed MIMO antenna is 28 dB at 5.8 GHz and the envelope correlation equals 0.003. Owing to these good performances each antenna can operate almost independently. A good agreement is achieved between the simulated and the measured results.

scholarly journals Isolation Frequency Switchable MIMO Antenna for PCS, WIMAX and WLAN Application

2019 ◽  
Vol 18 (3) ◽  
pp. 27-33
Author(s):  
Adamu Halilu Jabire ◽  
Anas Abdu ◽  
Sani Saminu ◽  
Abubakar Muhammad Sadiq ◽  
Mohammed Jajere Adamu
Keyword(s):  
Multiple Input Multiple Output ◽  
Personal Communication ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
Personal Communication System ◽  
Lumped Element ◽  
Multiple Input ◽  
Input Multiple Output

In this study, a lumped component based frequency reconfigurable multiple-input-multiple-output (MIMO) receiving wire design is presented. The proposed antenna is composed of a planar structure in form of F-shaped together with a slotted and defected ground structure for bandwidth and isolation enhancement. The MIMO antenna operates in six frequencies upon the state of the four lumped element switches. The proposed receiving wire design exhibits a multiband frequency reconfigurable characteristics from 1-7GHz with isolation of more than 14dB for the whole band, with efficiency of about 75%. The MIMO antenna’s behavior in terms of ratio of square root of the sum of power reflected wave to the incident wave (TARC), ECC and CCL are all within the acceptable limits. The design is suitable for personal communication system (PCS), WIMAX and WLAN wireless applications.

scholarly journals Mutual Coupling Reduction of DRA for MIMO Applications

2019 ◽  
Vol 8 (1) ◽  
pp. 75-81
Author(s):  
N. Al Shalaby ◽  
S. G. El-Sherbiny
Keyword(s):  
Mutual Coupling ◽  
Dielectric Material ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Element Method

In this paper, A multiple input Multiple Output (MIMO) antenna using two Square Dielectric Resonators (SDRs) is introduced. The mutual coupling between the two SDRAs is reduced using two different methods; the first method is based on splitting a spiral slot in the ground plane, then filling the slot with dielectric material, "E.=2.2". The second method is based on inserting a copper parasitic element, having the same shape of the splitted Spiral, between the two SDRAs.  The effect of replacing the copper parasitic element with Carbon nanotubes (CNTs) parasitic element "SOC12 doped long-MWCNT BP" is also studied. The antenna system is designed to operate at 6 GHz. The analysis and simulations are carried out using finite element method (FEM). The defected ground plane method gives a maximum isolation of l8dB at element spacing of 30mm (0.6λo), whereas the parasitic element method gives a maximum isolation of 42.5dB at the same element spacing.

scholarly journals Minimization of Mutual Coupling Using Neutralization Line Technique for 2.4 GHz Wireless Applications

2015 ◽  
Vol 6 (3) ◽  
pp. 1-15 ◽  
Author(s):  
Wan Noor Najwa Wan Marzudi ◽  
Zuhairiah Zainal Abidin ◽  
Siti Zarina Mohd Muji ◽  
Yue Ma ◽  
Raed A. Abd-Alhameed
Keyword(s):  
Reflection Coefficient ◽  
Mutual Coupling ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Wireless Applications ◽  
Input Multiple Output ◽  
Neutralization Line

This paper presented a planar printed multiple-input-multiple-output (MIMO) antenna with a dimension of 100 x 45 mm2. It composed of two crescent shaped radiators placed symmetrically with respect to the ground plane. Neutralization line applied to suppress mutual coupling. The proposed antenna examined both theoretically and experimentally, which achieves an impedance bandwidth of 18.67% (over 2.04-2.46 GHz) with a reflection coefficient < -10 dB and mutual coupling minimization of < -20 dB. An evaluation of MIMO antennas is presented, with analysis of correlation coefficient, total active reflection coefficient (TARC), capacity loss and channel capacity. These characteristics indicate that the proposed antenna suitable for some wireless applications.

scholarly journals Modified U-Shaped Resonator as Decoupling Structure in MIMO Antenna

Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1321
Author(s):  
Amjad Iqbal ◽  
Ahsan Altaf ◽  
Mujeeb Abdullah ◽  
Mohammad Alibakhshikenari ◽  
Ernesto Limiti ◽  
...  
Keyword(s):  
Multiple Input Multiple Output ◽  
Equivalent Circuit Model ◽  
Separation Distance ◽  
Antenna System ◽  
Parametric Modelling ◽  
Mimo Antenna ◽  
Antenna Performance ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Simple Assembly

This paper presents an isolation enhancement of two closely packed multiple-input multiple-output (MIMO) antenna system using a modified U-shaped resonator. The modified U-shaped resonator is placed between two closely packed radiating elements resonating at 5.4 GHz with an edge to edge separation distance of 5.82 mm (λ∘/10). Through careful adjustment of parametric modelling, the isolation level of −23 dB among the densely packed elements is achieved. The coupling behaviour of the MIMO elements is analysed by accurately designing the equivalent circuit model in each step. The antenna performance is realized in the presence and absence of decoupling structure, and the results shows negligible effects on the antenna performance apart from mutual coupling. The simple assembly of the proposed modified U-shaped isolating structure makes it useful for several linked applications. The proposed decoupling structure is compact in nature, suppress the undesirable coupling generated by surface wave and nearby fields, and is easy to fabricate.

A Superwideband Monopole Multiple-Input-Multiple-Output (MIMO) Antenna with Dual Notched (Inverted T-Shaped Stub/U-Shaped Slit) Band Characteristics for Wireless Applications

2019 ◽  
Vol 16 (10) ◽  
pp. 4242-4248
Author(s):  
Manoj Kapil ◽  
Manish Sharma
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
Research Article ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Microstrip Feed

In this research article, a compact MIMO (Multiple-Input-Multiple-Output) antenna with inclusion of two notched bands characteristics is presented. Designed MIMO antenna consist of dual radiating patches printed on one surface of the substrate which covers measured wide impedance bandwidth of 2.88 GHz–19.98 GHz and satisfies bandwidth ratio more than 10:1 for superwideband with compact size of 18 mm × 34 mm. Two radiating patch are placed symmetrically for MIMO configuration and notched bands to eliminate WiMAX/C and WLAN bands are obtained by attaching inverted T-shaped stub on radiating patch and etched inverted U-shape slit in microstrip feed. Isolation between the two radiating patch is maintained by adding two L-shaped stub in slotted rectangular ground plane. Measured radiation pattern are stable in operating band and offers maximum 4.23 dBi and 89% gain and radiation efficiency respectively. Moreover, antenna shows good diversity performance with Envelope-Correlation-Coefficient (ECC) < 0.5, Directive-Gain (DG) > 9.95 dB and Total-Active-Reflection Coefficient (TARC) < -30 dB.

Sign in / Sign up

Export Citation Format

Share Document