scholarly journals Mutual Coupling Reduction of E-Shaped MIMO Antenna with Matrix of C-Shaped Resonators

2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Raghad Ghalib Saadallah Alsultan ◽  
Gölge Ögücü Yetkin
Keyword(s):  
Mutual Coupling ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Surface Current ◽  
Antenna System ◽  
Total Efficiency ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Parallel Arrangement ◽  
Input Multiple Output

E-shaped multiple-input-multiple-output (MIMO) microstrip antenna systems operating in WLAN and WiMAX bands (between 5 and 7.5 GHz) are proposed with enhanced isolation features. The systems are comprised of two antennas that are placed parallel and orthogonal to each other, respectively. According to the simulation results, the operating frequency of the MIMO antenna system is 6.3 GHz, and mutual coupling is below −18 dB in a parallel arrangement, whereas they are 6.4 GHz and −25 dB, respectively, in the orthogonal arrangement. The 2 × 3 matrix of C-shaped resonator (CSR) is proposed and placed between the antenna elements over the substrate, to reduce the mutual coupling and enhance the isolation between the antennas. More than 30 dB isolation between the array elements is achieved at the resonant frequency for both of the configurations. The essential parameters of the MIMO array such as mutual coupling, surface current distribution, envelop correlation coefficient (ECC), diversity gain (DG), and the total efficiency have been simulated to verify the reliability and the validity of the MIMO system in both parallel and orthogonal configurations. The experimental results are also provided and compared for the mutual coupling with simulated results. An adequate match between the measured and simulated results is achieved.

scholarly journals Muli-UWB Antenna System Design for 5G Wireless Applications with Diversity

2021 ◽  
Vol 2021 ◽  
pp. 1-18
Author(s):  
Marwa Daghari ◽  
Chaker Essid ◽  
Hedi Sakli
Keyword(s):  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Total Efficiency ◽  
Defected Ground Structure ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Wireless Applications ◽  
Multiple Input ◽  
Input Multiple Output

In this paper, we propose a compact Multiple Input Multiple Output (MIMO) antenna system with high isolation for wireless applications in 5G connected devices. This MIMO antenna system with the size of 92 × 88   m m 2 consists of two elliptical antennas symmetrically arranged next to each other. Two decoupling methods which are neutralization and Defected Ground Structure (DGS) are applied to ensure diversity of the proposed MIMO antenna. The single and MIMO antennas are simulated and analyzed then fabricated and measured. A good agreement between measurements and simulations is obtained. These configurations, dedicated to covering the 3.4 GHz band -3.8 GHz, have shown very satisfactory performances more than -30 dB in terms of reduction of mutual coupling between the antennas constituting our system. MIMO diversity parameters, such as Envelope Correlation (ECC), Diversity Gain (DG), and total efficiency, are also studied for each proposed MIMO system. Thus, results demonstrate that our two proposed antenna configurations are very suitable for 5G MIMO applications.

scholarly journals Mutual Coupling Reduction of DRA for MIMO Applications

2019 ◽  
Vol 8 (1) ◽  
pp. 75-81
Author(s):  
N. Al Shalaby ◽  
S. G. El-Sherbiny
Keyword(s):  
Mutual Coupling ◽  
Dielectric Material ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Element Method

In this paper, A multiple input Multiple Output (MIMO) antenna using two Square Dielectric Resonators (SDRs) is introduced. The mutual coupling between the two SDRAs is reduced using two different methods; the first method is based on splitting a spiral slot in the ground plane, then filling the slot with dielectric material, "E.=2.2". The second method is based on inserting a copper parasitic element, having the same shape of the splitted Spiral, between the two SDRAs.  The effect of replacing the copper parasitic element with Carbon nanotubes (CNTs) parasitic element "SOC12 doped long-MWCNT BP" is also studied. The antenna system is designed to operate at 6 GHz. The analysis and simulations are carried out using finite element method (FEM). The defected ground plane method gives a maximum isolation of l8dB at element spacing of 30mm (0.6λo), whereas the parasitic element method gives a maximum isolation of 42.5dB at the same element spacing.

A Study on V-Shaped Microstrip Patch MIMO Antenna

2017 ◽  
Vol 5 (3) ◽  
pp. 606
Author(s):  
Charles MacWright Thomas ◽  
Huda A. Majid ◽  
Zuhairiah Zainal Abidin ◽  
Samsul Haimi Dahlan ◽  
Mohamad Kamal A. Rahim ◽  
...  
Keyword(s):  
Patch Antenna ◽  
Mutual Coupling ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Microstrip Patch Antenna ◽  
Mimo Antenna ◽  
Compact Antenna ◽  
Microstrip Patch ◽  
Multiple Input ◽  
Input Multiple Output

<p>A study on the V-shaped microstrip patch antenna for multiple-input multiple-output (MIMO) communication system based on the antenna orientation is performed. First the microstrip patch antenna operating at 2.45 GHz is calculated and simulated. Next, multiple element of antennas for MIMO system is simulated and discussed. V-shaped with 45 degree slanted inward and outward is studied. The antenna properties is analyzed and compact antenna design is determined based on the simulation results. The results shows the gap between antennas can be optimized to 1 mm while maintaining low mutual coupling. The gain of the MIMO antenna is 8.42 dBi. The simulated return losses, together with the radiation patterns, are presented and discussed.</p>

scholarly journals Dual Zeroth-Order Resonant USB Dongle Antennas for 4G MIMO Wireless Communications

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Yan Shi ◽  
Lu Zhang ◽  
Chang-Hong Liang
Keyword(s):  
Wireless Communications ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Total Efficiency ◽  
Zeroth Order ◽  
Mimo Antenna ◽  
Order Resonance ◽  
Measurement Results ◽  
Multiple Input ◽  
Input Multiple Output

A multiband multiple-input multiple-output (MIMO) antenna system consisting of two antenna elements has been proposed for 4G USB dongle application. The designed MIMO antenna system with a compact volume of 25 mm × 30 mm × 3.5 mm operates in two zeroth-order resonance (ZOR) modes to cover the LTE band 13 (746–787 MHz), GSM850/900 (824–960 MHz), and LTE band 7 (2500–2690 MHz) simultaneously. A pair of L-shaped parasitic strips and an etching slot on the ground are employed to achieve good isolation between two elements. Measurement results show that proposed MIMO antenna system has total efficiency over 40% across the operation band and isolation less than −8 dB at the lower band and −16 dB at the upper band, respectively.

scholarly journals PENGARUH PENYUSUNAN POLARISASI PADA SISTEM ANTENA MIMO TERHADAP KAPASITAS KANAL

2020 ◽  
Vol 5 (1) ◽  
pp. 13
Author(s):  
Abdurrahman Rizki ◽  
Alloysius Adya Pramudita ◽  
Trasma Yunita
Keyword(s):  
Circular Polarization ◽  
Channel Capacity ◽  
Mimo System ◽  
Signal To Noise Ratio ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Mimo Antenna ◽  
Left Hand ◽  
Multiple Input ◽  
Input Multiple Output

Multiple Input Multiple Output (MIMO) system is a technology that has the potential to be developed to increase channel capacity. The increase in channel capacity in the MIMO system is not only determined by the number of antennas, but is determined by the characteristics and arrangement of the antenna concept. This study identifies the effect of circular polarization on the MIMO antenna system on channel capacity. Co-polarization consists of a Left Hand Circular Polarization (LHCP) and Right Hand Circular Polarization (RHCP) configuration, while cross-polarization consists of an RHCP-LHCP configuration. The co-polarization of the antenna with the LHCP configuration results in an estimated channel capacity of 11,578 bps / Hz when it is at the lowest Signal to Noise Ratio (SNR) is 5 dB

A printed multiband MIMO antenna with decoupling element

2019 ◽  
Vol 11 (4) ◽  
pp. 413-419 ◽  
Author(s):  
Ziyu Xu ◽  
Qisheng Zhang ◽  
Linyan Guo
Keyword(s):  
Mutual Coupling ◽  
Surface Current ◽  
Antenna System ◽  
Antenna Element ◽  
Coupling Mechanism ◽  
Mimo Antenna ◽  
Resonant Modes ◽  
Monopole Antennas ◽  
Input Multiple Output ◽  
Ground Plate

AbstractA printed multiband Multi-Input Multiple-Output (MIMO) antenna is proposed in this paper. This MIMO antenna system comprises two symmetric printed monopole antennas. Each antenna element consists of multiple bend lines, producing four resonant modes and covering the GSM900, PCS, LTE2300, and 5G bands. Simulated and measured results prove that the proposed MIMO antenna can be applied to traditional 2G, 3G, 4G, and present 5G mobile communication. By etching four inverted L-shaped grooves on its ground plate, mutual coupling between the adjacent antenna elements has been suppressed. This makes the |S21| at all four resonant modes is lower than −40 dB. In addition, its low coupling mechanism has been analyzed by surface current distribution. The designed multiband MIMO antenna provides an idea of reference to realize low mutual coupling between antenna elements, which is also realizable in infrared or optical regimes with appropriate designs.

scholarly journals Modified U-Shaped Resonator as Decoupling Structure in MIMO Antenna

Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1321
Author(s):  
Amjad Iqbal ◽  
Ahsan Altaf ◽  
Mujeeb Abdullah ◽  
Mohammad Alibakhshikenari ◽  
Ernesto Limiti ◽  
...  
Keyword(s):  
Multiple Input Multiple Output ◽  
Equivalent Circuit Model ◽  
Separation Distance ◽  
Antenna System ◽  
Parametric Modelling ◽  
Mimo Antenna ◽  
Antenna Performance ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Simple Assembly

This paper presents an isolation enhancement of two closely packed multiple-input multiple-output (MIMO) antenna system using a modified U-shaped resonator. The modified U-shaped resonator is placed between two closely packed radiating elements resonating at 5.4 GHz with an edge to edge separation distance of 5.82 mm (λ∘/10). Through careful adjustment of parametric modelling, the isolation level of −23 dB among the densely packed elements is achieved. The coupling behaviour of the MIMO elements is analysed by accurately designing the equivalent circuit model in each step. The antenna performance is realized in the presence and absence of decoupling structure, and the results shows negligible effects on the antenna performance apart from mutual coupling. The simple assembly of the proposed modified U-shaped isolating structure makes it useful for several linked applications. The proposed decoupling structure is compact in nature, suppress the undesirable coupling generated by surface wave and nearby fields, and is easy to fabricate.

Design of a compact MIMO antenna system with reduced mutual coupling

2014 ◽  
Vol 8 (1) ◽  
pp. 117-124 ◽  
Author(s):  
Mohammed Younus Talha ◽  
Kamili Jagadeesh Babu ◽  
Rabah W. Aldhaheri
Keyword(s):  
Resonant Frequency ◽  
Mutual Coupling ◽  
Mimo System ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Operating Band

A novel compact multiple-input–multiple-output (MIMO) antenna system operating from 5 to 7.3 GHz is proposed for wireless applications. It comprises of two similar antennas with microstrip feeding and radiating patches developed on a reduced ground plane. The developed antenna system resonates at a dual-band of 5.4 and 6.8 GHz frequencies, giving an impedance bandwidth of 38% (based on S11 < −10 dB). The unique structure of the proposed MIMO system gives a reduced mutual coupling of −27 dB at 5.4 GHz resonant frequency and −19 dB at 6.8 GHz resonant frequency and in the entire operating band the coupling is maintained well below −16 dB. The envelope correlation coefficient of the proposed MIMO system is calculated and is found to be less than 0.05 in the operating band. The measured and simulation results are found in good agreement.

scholarly journals Design of a compact hexagonal structured dual band MIMO antenna using orthogonal polarization for WLAN and satellite applications

2019 ◽  
Vol 9 (5) ◽  
pp. 4217
Author(s):  
Aziz Dkiouak ◽  
Mohssine El Ouahabi ◽  
Alia Zakriti ◽  
Mohsine Khalladi ◽  
Aicha Mchbal
Keyword(s):  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Dual Band ◽  
Orthogonal Polarization ◽  
Mimo Antenna ◽  
X Band ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Satellite Applications ◽  
Strip Lines

In this paper, a compact dual band multiple-input multiple-output (MIMO) antenna system for WLAN and X-band satellite applications (2.4/9.8 GHz respectively) is proposed. On the top face of the substrate, two antenna elements with a size of 20 × 24 mm2 are placed side by side and fed with matched orthogonal micro-strip lines. The two antenna elements have orthogonal polarization which can reduce the mutual coupling between its ports. The designed antenna system is fabricated and measured to validate the simulation results. The impedance bandwidths are about 370 MHz (2.19 to 2.56 GHz) and 630 MHz (9.44 to 10.07 GHz), while the obtained isolation is greater than 14 dB at the operating bands. Furthermore, the envelope correlation is less than 0.052 and 0.008 at 2.4 and 9.8 GHz, respectively. Hence the diversity gain is higher than 9.98 in the frequency bands of interest.

scholarly journals High-Performance Multiple-Input Multiple-Output Antenna System For 5G Mobile Terminals

Electronics ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 1090 ◽  
Author(s):  
Mujeeb Abdullah ◽  
Saad Hassan Kiani ◽  
Lway Faisal Abdulrazak ◽  
Amjad Iqbal ◽  
M. A. Bashir ◽  
...  
Keyword(s):  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Mimo Channel ◽  
Slot Antenna ◽  
Total Efficiency ◽  
Multiple Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Metal Casing ◽  
Multiple Antenna System

In this paper, the systematic design of a multiple antenna system for 5G smartphone operating at 3.5 GHz for multiple-input multiple-output (MIMO) operation in smartphones is proposed. The smartphone is preferred to be lightweight, thin, and attractive, and as a result metal casings have become popular. Using conventional antennas, such as a patch antenna, Inverted-F antennas, or monopole, in proximity to metal casing leads to decreasing its total efficiency and bandwidth. Therefore, a slot antenna embedded in the metal casing can be helpful, with good performance regarding bandwidth and total efficiency. The proposed multiple antenna system adopted the unit open-end slot antenna fed by Inverted-L microstrip with tuning stub. The measured S-parameters results agree fairly with the numerical results. It attains 200 MHz bandwidth at 3.5 GHz with ports isolation of (≤−13 dB) for any two antennas of the system. The influence of the customer’s hand for the proposed multiple antenna system is also considered, and the MIMO channel capacity is computed. The maximum achievable MIMO channel capacity based on the measured result is 31.25 bps/Hz and is about 2.7 times of 2 × 2 MIMO operation.

Sign in / Sign up

Export Citation Format

Share Document