scholarly journals Power supply reliability models of oil production facilities

2021 ◽  
pp. 59-63
Author(s):  
T. D. Gladkikh ◽  
Keyword(s):  
Power Supply ◽  
Power Supply System ◽  
Oil Production ◽  
Gas Production ◽  
Electrical Network ◽  
Reliability Models ◽  
Reliability Indicators ◽  
Supply Systems ◽  
Production Facilities ◽  
Supply Reliability

This paper presents power supply systems reliability models of oil production facilities. There are two types of electrical complexes: an electrical network with a consumer sensitive to voltage dips and an electrical network with a consumer with technological redundancy. A comprehensive analysis of the power supply system and the power consumer allowed us to clarify the reliability indicators and determine the direction of improving the power supply reliability to oil and associated petroleum gas production facilities

scholarly journals Methods for calculating the reliability of power supply systems

2021 ◽  
Vol 25 (1) ◽  
pp. 57-65
Author(s):  
A. S. Lukovenko ◽  
I. V. Zenkov
Keyword(s):  
Neural Network ◽  
Failure Rate ◽  
Power Supply ◽  
Software Package ◽  
Power Supply System ◽  
Supply System ◽  
Reliability Indicators ◽  
Artificial Neural ◽  
Supply Systems ◽  
Technical Reliability

The aim was to determine the reliability indicators of a power supply system using an artificial neural network model. A model for calculating technical reliability was developed using the following methods: an algorithm for calculating reliability indicators of power supply systems, the method of failure rate of a power supply system and a forecasting model using artificial neural networks. It was established that a power supply system is formed by an open radial power supply circuit. The failure rate of the power supply subsystem was determined by calculating the failure rate of i-th element of the subsystem. As a result of calculating the probability of failure-free operation of the subsystem for various conditions (5 time intervals), it was found that with an increase in the operating time from 100 to 500 h, a linear increase in the rate of system failures occurs from 0.0051 to 0.0073 1/h. A comparison of the obtained mean-to-failure values of the main and the same backup subsystem in the unloaded mode with an absolutely reliable switch (269.62 h) with the main and the same backup subsystem in the loaded mode (202.21 h) was carried out. The results differ by 67.41 h, which indicates a higher degree of reliability of the first method. The software package Prognoz_INS_2020 was developed. An acceptable accuracy of no more than 2.17% was obtained by comparing the results of the conventional calculation of the failure rate of power supply systems and using the Prognoz_INS_2020 software package. This indicates the efficiency of the proposed software package in reliability calculations at operating energy enterprises. The proposed methods for assessing technical reliability both using the conventional model and a model based on an artificial neural network made it possible to assess the state of power supply systems, which helps to prevent dangerous emergencies. 

scholarly journals Risk-Based Models of Equipment Repair Management in Power Supply Systems with a Mono Consumer

2021 ◽  
pp. 17-32
Author(s):  
Yuri A. Sekretarev ◽  
Vladimir M. Levin
Keyword(s):  
Decision Making ◽  
Power Supply ◽  
Power Supply System ◽  
Oil And Gas ◽  
Probabilistic Approach ◽  
Gas Production ◽  
Supply System ◽  
Actual State ◽  
Power Equipment ◽  
Supply Systems

An adequate description of reliability in decision-making models for managing the restoration of its properties is a complex scientific task. Quite a lot of attention has been paid to the correct solution of this problem in various fields of technology. The article proposes and implements a probabilistic approach to calculating the circuit reliability of the power supply system using an assessment of the actual state of its main elements. The assessment of the state of the equipment of the power supply system is carried out using an integral indicator of the technical condition. This creates the basis for applying a risk-based approach to the management of maintenance and repairs to assess the consequences and feasibility of repair and restoration work of power equipment while minimizing possible damage from power outages to consumers. The article presents two methods for calculating reliability, focused on both recoverable and non-recoverable elements of the power supply system. In addition, a decision-making model for managing repairs of power equipment in power supply systems is proposed. A separate case is considered when the power supply system provides electricity to a mono-consumer, which is typical for oil and gas production. Based on the analysis of scenarios for the implementation of the risk-based approach, the influence of various degrees of severity of the consequences of failure on the assessment of decisions made is studied. The developed models and methods are illustrated by computational examples from the practice of operating electrical equipment in power supply systems with a monoconsumer

Adjusting Electricity Cost Depending on Power Supply Outages

2020 ◽  
Vol 67 (2) ◽  
pp. 44-50
Author(s):  
Vadim E. Bolshev ◽  
Aleksandr V. Vinogradov ◽  
Alina V. Vinogradova ◽  
Aleksey V. Bukreev ◽  
Aleksandr A. Lansberg
Keyword(s):  
Power Quality ◽  
Power Supply ◽  
Power Supply System ◽  
Economic Incentive ◽  
Supply System ◽  
Research Purpose ◽  
Electricity Cost ◽  
Economic Method ◽  
Urgent Task ◽  
Supply Reliability

During the functioning of power supply system, there can be situations where the culprit in interruptions of power supply to consumers and a power quality violation is a power supply company or a consumer himself. Therefore, the economic incentive for power supply companies and consumers to increase power supply reliability and power quality is an urgent task. To implement such incentives, it is necessary to control the facts and time of power supply outages and their values as well as cases and time of non-compliance of power quality with the requirements of standards. It is possible with the use of a monitoring system for power supply reliability and power quality. (Research purpose) The research purpose is in developing a technical and economic method for stimulating power supply companies and consumers to increase efficiency of power supply system. (Materials and methods) The article provides a review of the structural diagram of a system for monitoring power supply reliability and power quality including devices for monitoring the number and duration of power outages and voltage deviations. (Results and discussion). An economic method has been developed to stimulate power supply companies and consumers to increase power supply system efficiency. The essence of the method is to control the parameters of power supply reliability and power quality, identify the violation of these parameters, determine the culprit of the violation, determine the time characteristics of the violation, summarize the duration of violations for the reporting period, compare the actual amount of duration with the allowable one, determine the amount of compensation for the violation and impose sanctions on payment compensation by the perpetrators of violations of these parameters. The article presents an algorithm for adjusting the cost of electricity supplied to consumers depending on the number and duration of voltage deviations and the number and duration of outages. The algorithm serves to ensure the operation of the specified technical and economic method. (Conclusions) The algorithm works in conjunction with a system for monitoring power supply reliability and power quality based on signals from devices that control the number and duration of outages and voltage deviations.

scholarly journals Determination of reliability of power supply of ship's responsible power receivers

2020 ◽  
pp. 22-26
Author(s):  
С.Е. Кузнецов ◽  
Н.А. Алексеев ◽  
А.А. Виноградов
Keyword(s):  
Power Systems ◽  
Power System ◽  
Power Supply ◽  
Electric Power System ◽  
Time To Failure ◽  
Parallel Operation ◽  
Diesel Generator ◽  
Operating Modes ◽  
Reliability Indicators ◽  
Supply Reliability

Изложена методика расчета показателей безотказности электроснабжения (вероятности безотказного электроснабжения и средней наработки до отказа) ответственных приемников морского судна, подключаемых к аварийному электрораспределительному щиту. Методика реализована применительно к судовой электроэнергетической системе с тремя источниками электроэнергии – двумя основными дизель-генераторными агрегатами, подключенными к главному электрораспределительному щиту, и одним аварийным дизель-генераторным агрегатом, подключенным к аварийному электрораспределительному щиту. Рассмотрены различные режимы работы судовой электроэнергетической системы: при работе до первого отказа одного основного дизель-генератора, при параллельной работе двух основных дизель-генераторов, при работе одного аварийного дизель-генератора; а также после обесточивания с учетом возможности последующего включения резервного или (и) аварийного дизель генератора. Методика, с соответствующими корректировками, может быть использована для расчета показателей безотказного электроснабжения в судовых электроэнергетических системах другой комплектации. Расчет показателей безотказности электроснабжения необходим при проектировании для обеспечения требуемого уровня надежности электроснабжения судовых приемников электроэнергии, а при эксплуатации – для предупреждения отказов и планирования технического обслуживания и ремонта элементов судовых электроэнергетических систем. The methodology for calculating the indicators of the reliability of power supply (the probability of failure-free power supply and the mean time to failure) of critical receivers of a sea vessel connected to the emergency electrical switchboard is presented. The technique is implemented in relation to a ship power system with three sources of electricity - two main diesel generator sets connected to the main electrical switchboard, and one emergency diesel generator set connected to an emergency electrical switchboard. Various operating modes of the ship's electric power system are considered: during operation until the first failure of one main diesel generator, during parallel operation of two main diesel generators, during operation of one emergency diesel generator; as well as after de-energizing, taking into account the possibility of subsequent switching on of the backup and / or emergency diesel generator. The technique, with appropriate adjustments, can be used to calculate indicators of reliable power supply in ship power systems of a different configuration. Calculation of power supply reliability indicators is necessary during design to ensure the required level of power supply reliability for ship power receivers, and during operation - to prevent failures and plan maintenance and repair of elements of ship power systems.

Challenges and Opportunities for Green Hydrogen Power Supply in Oil and Gas Remote Facilities

2021 ◽  
Author(s):  
Salvador Alejandro Ruvalcaba Velarde
Keyword(s):  
Renewable Energy ◽  
Power Supply ◽  
Oil And Gas ◽  
Hydrogen Generation ◽  
Oil And Gas Industry ◽  
Gas Production ◽  
Energy Carrier ◽  
Low Carbon ◽  
Cost Constraints ◽  
Supply Systems

Abstract The energy transition to renewable energy and hydrogen as an energy carrier, along with low-carbon footprint production targets in the oil and gas industry act as a catalytic for exploring the role of hydrogen in oil and gas production. For upstream and midstream operations, potential opportunities for using hydrogen as an energy carrier are being developed both in hydrogen generation (X-to-hydrogen) as well as in hydrogen consumption (hydrogen-to-X), but not without series of technical and economical challenges. This paper presents potential use cases in upstream and midstream facilities for hydrogen generation and consumption, be it both from hydrocarbon processing resultant in what is called "blue hydrogen" or from integration with renewable energy to form what is called "green hydrogen". It also explains process integration requirements with diagrams for full-cycle green hydrogen use from generation to consumption and its interaction with renewable energy technologies to achieve low to zero-carbon emission power supply systems. Different hydrogen generation and conversion technologies are reviewed as part of the modeling process. Green hydrogen feasibility is assessed in terms of operational efficiency and cost constraints. Hybrid hydrogen and renewable energy power supply systems are simulated and presented according to the intended applications of use in oil and gas facilities. This paper provides a feasibility analysis and hydrogen technology integration potential with renewable energy for applications in oil and gas remote facilities power supply. It also shows emerging hydrogen technologies potential for use in upstream and midstream applications.

scholarly journals Features of Estimation of Structural Reliability of Power Supply Systems

2019 ◽  
Vol 139 ◽  
pp. 01032
Author(s):  
Boris Papkov ◽  
Vladimir Osokin
Keyword(s):  
Distributed Generation ◽  
Power Supply ◽  
Structural Reliability ◽  
Renewable Energy Sources ◽  
Integral Characteristic ◽  
Electric Power System ◽  
Mathematical Apparatus ◽  
Reliability Indicators ◽  
Demand Changes ◽  
Supply Systems

Development and operation of modern power supply systems of consumers which are the part of distributed generation (DG) systems with their communication with electric power system (EPS) and renewable energy sources (RES) demand changes in estimation of their reliability indicators on the basis of corresponding mathematical apparatus. It is shown that DG systems refer to structures with several overlapping zones of action, which determines their peculiarities, which are represented by some integral characteristic - efficiency of operation, which characterizes the degree of expediency of use of the DG system in different modes. The approach based on evaluation of effectiveness of such systems is offered. Examples of calculation of relatively simple structures of DG systems performing several tasks simultaneously are given.

scholarly journals Multi-Objective Optimal Configuration of the CCHP System

Processes ◽  
2020 ◽  
Vol 8 (3) ◽  
pp. 351 ◽  
Author(s):  
Liukang Zheng ◽  
Xiaoli Wang ◽  
Baochen Jiang
Keyword(s):  
Power Supply ◽  
Power Supply System ◽  
Meteorological Data ◽  
High Energy ◽  
Construction Cost ◽  
Economic Benefits ◽  
Supply System ◽  
Environmental Benefits ◽  
System Construction ◽  
Supply Reliability

The combined cooling, heating and power (CCHP) system not only has high energy efficiency but also has different load structures. Traditional separate production (SP) system and power supply system do not consider the land cost in terms of the environmental benefits, and in the aspect of the power supply reliability, the grid-connected inverter cost is also ignored. Considering the deficiency of the traditional energy supply system, this paper builds the CCHP system construction cost model. The particle swarm optimization (PSO) is adopted to find out the minimum value of the construction cost, and the optimal system construction scheme is constructed from three aspects which are system reliability, economic benefits and environmental benefits. In this paper, the typical daily data, as well as the meteorological data and the load data, in the last four years are taken as experimental dataset. The experimental results show that compared with the traditional SP system and power supply system, the CCHP system established in this paper not only achieves lower cumulative investment cost, but also has a good power supply reliability and environmental benefits.

scholarly journals MODELING OF RELIABILITY INDICATORS OF ELEMENTS OF POWER SUPPLY SYSTEMS WITH UNSINUSOIDAL VOLTAGE

2020 ◽  
Vol 1 (49) ◽  
pp. 56-67
Author(s):  
I. Zhezhelenko ◽  
◽  
Yu. Papaika ◽  
O. Lysenko ◽  
M. Rogoza ◽  
...  
Keyword(s):  
Power Supply ◽  
Reliability Indicators ◽  
Supply Systems

scholarly journals Energy profiles as a method for minimizing weight of hybrid power supply systems

2017 ◽  
pp. 5-13
Author(s):  
Arkadiusz Adamczyk
Keyword(s):  
Power Supply ◽  
Energy Demand ◽  
Power Supply System ◽  
Electric Energy ◽  
Energy Profiles ◽  
Supply Systems ◽  
Alternative Solutions ◽  
Analysis Of Performance ◽  
Source Of Information

This article presents an analysis of energy demand by a group of portable military use appliances. This analysis was used by the author to offer an solution aimed at reducing the weight of the power supply system. This solution is based on energy profiles which were derived from the analyses and measurements, and on applying appropriately modified hybrid supply sources. Catalogue data are often used in support of an analysis of performance of electronic appliances. For a user, documents prepared by a manufacturer are the main source of information concerned with the amount and quality of electric energy sources required for the appliance to work properly. Investigations carried out in real conditions often verify this data, which provides a base for seeking alternative solutions in the course of designing new sources of power, e.g. such as the ones proposed in the article.

Sign in / Sign up

Export Citation Format

Share Document