COMPARATIVE ANALYSIS OF THE CALCULATION OF LIGHTING SYSTEMS OF VARIOUS TYPES BASED ON INDUSTRIAL PREMISES

2021 ◽  
Vol 3 (1) ◽  
pp. 009-013
Author(s):  
A. D. BOGDANOV ◽  
◽  
R. V. SOLOPOV ◽  
◽  
◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Comparative Analysis ◽  
Calculation Methods ◽  
High Quality ◽  
Industrial Enterprises ◽  
Regulatory Documents ◽  
Innovative Method ◽  
Manual Methods ◽  
Lighting Systems

At present, the issues of economy and energy efficiency are actual for organizations. One of the ar eas of ener gy saving is the optimization of the functioning of lighting systems. Lighting of premises of industrial enterprises with a long stay of people is the object of research in this article. Based on comparative calculations, this article shows the efficiency of using the most common configurations of lighting systems that pr ovide high-quality and economical illumination of workplaces that meet the requirements of construction, technical and sanitary regulatory documents, as well as the efficiency of using software for designing lighting systems. To design the lighting of premises, design bureaus use manual methods for calculating the electric lighting of premises. The authors of the article presented an innovative method for designing electric lighting using the DIALux evo program. The program has combined all calculation methods and optimized them. The results of the wor k, obtained by calculation using the DIALux evo software, are advisory in the design of electr ic lighting systems.

scholarly journals Experimental Study of the Levels of Street Lighting Using Aerial Imagery and Energy Efficiency Calculation

2018 ◽  
Vol 10 (12) ◽  
pp. 4365 ◽  
Author(s):  
Ovidio Rabaza ◽  
Evaristo Molero-Mesa ◽  
Fernando Aznar-Dols ◽  
Daniel Gómez-Lorente
Keyword(s):  
Experimental Study ◽  
Energy Efficiency ◽  
Energy Savings ◽  
Electricity Consumption ◽  
Aerial Imagery ◽  
Street Lighting ◽  
Innovative Method ◽  
Consumption Data ◽  
The Status ◽  
Lighting Systems

This article describes an innovative method for measuring lighting levels and other lighting parameters through the use of aerial imagery of towns and cities. Combined with electricity consumption data from smart electricity meters, it was possible to measure the energy efficiency of public lighting installations. The results of this study also confirmed that lighting measurements, installation material, luminaire position, and electricity consumption data can be easily integrated into geographic information systems (GIS). The main advantage of this new methodology is that it provides information about lighting installations in large areas in less time than more conventional procedures. It is thus a more effective way of obtaining the data required to calculate the energy efficiency of lighting levels and electricity consumption. There is even the possibility of generating street lighting maps that provide local administrations with up-to-date information regarding the status of public lighting installations in their city. In this way, modifications or improvements can be made to achieve greater energy savings and, if necessary, to correct the distribution or configuration of public lighting systems to make them more efficient and sustainable. This research studied levels of street lighting and calculated the energy efficiency in various streets of Deifontes (Granada), through the use of aerial imagery.

Organic Light Emitting Diodes - Innovative Light Sources

2019 ◽  
pp. 101-107
Author(s):  
Sergei A. Stakharny
Keyword(s):  
Light Source ◽  
Organic Light Emitting Diodes ◽  
Organic Leds ◽  
Light Sources ◽  
High Quality ◽  
Light Emitting ◽  
Organic Light ◽  
Lighting Systems ◽  
Physical Principles ◽  
Prospects Of Application

This article is a review of the new light source – organic LEDs having prospects of application in general and special lighting systems. The article describes physical principles of operation of organic LEDs, their advantages and principal differences from conventional non-organic LEDs and other light sources. Also the article devoted to contemporary achievements and prospects of development of this field in the spheres of both general and museum lighting as well as other spheres where properties of organic LEDs as high-quality light sources may be extremely useful.

Analysis Criteria for Choosing Energy Efficient High-Quality Light Sources and Luminaires

2018 ◽  
pp. 113-119
Author(s):  
Gennady Ya. Vagin ◽  
Eugene B. Solntsev ◽  
Oleg Yu. Malafeev
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
National Standards ◽  
Light Sources ◽  
The European Union ◽  
High Quality ◽  
Eu Directive ◽  
The World ◽  
A New Technique ◽  
Energy Labelling

The article analyses critera applying to the choice of energy efficient high quality light sources and luminaires, which are used in Russian domestic and international practice. It is found that national standards GOST P 54993–2012 and GOST P 54992– 2012 contain outdated criteria for determining indices and classes of energy efficiency of light sources and luminaires. They are taken from the 1998 EU Directive #98/11/EU “Electric lamps”, in which LED light sources and discharge lamps of high intensity were not included. A new Regulation of the European Union #874/2012/EU on energy labelling of electric lamps and luminaires, in which these light sources are taken into consideration, contains a new technique of determining classes of energy efficiency and new, higher classes are added. The article has carried out a comparison of calculations of the energy efficiency classes in accordance with GOST P 54993 and with Regulation #874/2012/EU, and it is found out that a calculation using GOST P 54993 gives underrated energy efficiency classes. This can lead to interdiction of export for certain light sources and luminaires, can discredit Russian domestic manufacturer light sources and does not correspond to the rules of the World Trade Organization (WTO).

COMPARATIVE ANALYSIS OF EQUILIBRIUM BEACH PROFILE CALCULATION METHODS

2015 ◽  
pp. 39
Author(s):  
A. L. Khomchanovsky ◽  
E. A. Fedorova ◽  
An. A. Lygin ◽  
A. Sh. Khabidov
Keyword(s):  
Comparative Analysis ◽  
Calculation Methods ◽  
Beach Profile ◽  
Equilibrium Beach Profile

Qualitative anatomical restoration of the contact point of teeth – prevention of localized forms of periodontal diseases

2020 ◽  
Vol 25 (1) ◽  
pp. 10-15
Author(s):  
L. Yu. Orekhova ◽  
O. V. Prokhorova ◽  
V. Yu. Shefov
Keyword(s):  
Comparative Analysis ◽  
Computer Simulations ◽  
Periodontal Diseases ◽  
Contact Point ◽  
Clinical Stage ◽  
High Quality ◽  
Cross Sectional ◽  
Clinical Stages ◽  
Anatomical Restoration ◽  
Approximal Surfaces

Relevance. The restoration of a high-quality anatomical and functional contact point of teeth plays an important role in preventing the development of localized forms of periodontal disease.Purpose. Development of recommendations for qualitative anatomical restoration of the contact point of teeth for the prevention of localized forms of periodontal diseases.Materials and methods. In our study, which consisted of pre-clinical and clinical stages, were analyzed 50 CT scan of the chewing group teeth calculated the ratio of approximal surfaces of molars and premolars to the width of their crowns and computer simulations of the results of restoration of contact point. We also conducted a comparative analysis of wedges of different material with different cross-sectional shapes. At the clinical stage, the restoration of the contact point of teeth in patients according to our recommendations was carried out.Results. On the basis of the data obtained during the study, a formula for calculating the height and size of the restored contact point was compiled. Recommendations for anatomical restoration of the contact point are formulated.Conclusion. The application of the recommendations developed by us allows anatomically qualitatively restore the contact point and prevent the development of localized periodontal diseases.

ON COMPARATIVE ANALYSIS OF PERFORMANCE OPTIMIZATION METHODS OF MULTI-PUMP UNITS

2020 ◽  
pp. 23-28
Author(s):  
A.I. Glushchenko ◽  
M.Yu. Serov
Keyword(s):  
Energy Efficiency ◽  
Control System ◽  
Comparative Analysis ◽  
Performance Optimization ◽  
Optimization Methods ◽  
Online Optimization ◽  
New Approach ◽  
Advantages And Disadvantages ◽  
Analysis Of Performance

В статье рассматривается вопрос совершенствования системы управления параллельно-работающими насосными агрегатами с целью повышения энергоэффективности их работы. Проведено сравнение и выявление недостатков существующих методов решения рассматриваемой проблемы. Предложена идея нового подхода на базе онлайн оптимизации. The problem under consideration is improvement of the energy efficiency of a control system of parallel-running pump units. Known methods used to solve this problem are considered. Their advantages and disadvantages are shown. Finally, the idea of a new approach, which is based on online optimization, is proposed.

scholarly journals Numerical Analysis on Performance of the Middle-Pressure Jet Grouting Method for Ground Improvement

Geosciences ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 313
Author(s):  
Shinya Inazumi ◽  
Sudip Shakya ◽  
Takahiro Komaki ◽  
Yasuharu Nakanishi
Keyword(s):  
Life Cycle ◽  
Comparative Analysis ◽  
Ground Improvement ◽  
Cement Slurry ◽  
Mechanical Agitation ◽  
High Quality ◽  
Jet Grouting ◽  
Computer Aided ◽  
Improvement Method ◽  
Cae System

This study focused on the middle-pressure jet grouting method, which has a complicated development mechanism for the columnar soil-improved body, with the aim of establishing a computer-aided engineering (CAE) system that can simulate the performance on a computer. Furthermore, in order to confirm the effect of middle-pressure jet grouting with mechanical agitation and mixing, a comparative analysis was performed with different jet pressures, the development situation was visualized, and the performance of this method was evaluated. The results of MPS-CAE as one of the CAE systems showed that the cement slurry jet ratio in the planned improvement range, including the periphery of the mixing blade, by the middle-pressure jet grouting together with the mechanical agitation and mixing was increased and a high quality columnar soil-improved body was obtained. It is expected that the introduction of CAE will contribute to the visualization of the ground, and that CAE will be an effective tool for the visual management of construction for ground improvement and the maintenance of improved grounds during the life cycle of the ground-improvement method.

Sign in / Sign up

Export Citation Format

Share Document