Use of a single layer skin substitute for burn hand cover

Author(s):  
Adriana Alzate
Author(s):  
Murray Stewart ◽  
T.J. Beveridge ◽  
D. Sprott

The archaebacterium Methanospirillum hungatii has a sheath as part of its cell wall which is composed mainly of protein. Treatment with dithiothreitol or NaOH released the intact sheaths and electron micrographs of this material negatively stained with uranyl acetate showed flattened hollow tubes, about 0.5 μm diameter and several microns long, in which the patterns from the top and bottom were superimposed. Single layers, derived from broken tubes, were also seen and were more simply analysed. Figure 1 shows the general appearance of a single layer. There was a faint axial periodicity at 28.5 A, which was stronger at irregular multiples of 28.5 A (3 and 4 times were most common), and fine striations were also seen at about 3° to the tube axis. Low angle electron diffraction patterns (not shown) and optical diffraction patterns (Fig. 2) from these layers showed a complex meridian (as a result of the irregular nature of the repeat along the tube axis) which showed a clear maximum at 28.5 A, consistent with the basic subunit spacing.


Author(s):  
Maria Anna Pabst

In addition to the compound eyes, honeybees have three dorsal ocelli on the vertex of the head. Each ocellus has about 800 elongated photoreceptor cells. They are paired and the distal segment of each pair bears densely packed microvilli forming together a platelike fused rhabdom. Beneath a common cuticular lens a single layer of corneagenous cells is present.Ultrastructural studies were made of the retina of praepupae, different pupal stages and adult worker bees by thin sections and freeze-etch preparations. In praepupae the ocellar anlage consists of a conical group of epidermal cells that differentiate to photoreceptor cells, glial cells and corneagenous cells. Some photoreceptor cells are already paired and show disarrayed microvilli with circularly ordered filaments inside. In ocelli of 2-day-old pupae, when a retinogenous and a lentinogenous cell layer can be clearly distinguished, cell membranes of the distal part of two photoreceptor cells begin to interdigitate with each other and so start to form the definitive microvilli. At the beginning the microvilli often occupy the whole width of the developing rhabdom (Fig. 1).


Author(s):  
X. Lin ◽  
X. K. Wang ◽  
V. P. Dravid ◽  
J. B. Ketterson ◽  
R. P. H. Chang

For small curvatures of a graphitic sheet, carbon atoms can maintain their preferred sp2 bonding while allowing the sheet to have various three-dimensional geometries, which may have exotic structural and electronic properties. In addition the fivefold rings will lead to a positive Gaussian curvature in the hexagonal network, and the sevenfold rings cause a negative one. By combining these sevenfold and fivefold rings with sixfold rings, it is possible to construct complicated carbon sp2 networks. Because it is much easier to introduce pentagons and heptagons into the single-layer hexagonal network than into the multilayer network, the complicated morphologies would be more common in the single-layer graphite structures. In this contribution, we report the observation and characterization of a new material of monolayer graphitic structure by electron diffraction, HREM, EELS.The synthesis process used in this study is reported early. We utilized a composite anode of graphite and copper for arc evaporation in helium.


Swiss Surgery ◽  
2003 ◽  
Vol 9 (3) ◽  
pp. 114-120 ◽  
Author(s):  
Steinke ◽  
Leippold ◽  
Schweizer

Über die Frage der besten oder "richtigen" Technik bei gastrointestinalen Anastomosen wird seit je diskutiert. Die Ansprüche an eine gute Anastomosentechnik sind: Gute Durchblutung, Wasserdichtigkeit, Spannungsfreiheit, Sicherheit, leichte Durchführbarkeit, wenig Unruhe und Verschmutzung im Operationsgebiet und geringe Kosten. Die Operationstechnik der extramukösen, fortlaufenden Anastomosentechnik im Gastrointestinaltrakt wird in Wort und Bild erläutert. Anhand einer Pilotstudie, einer randomisierten Vergleichsstudie, einer Schweizer Multizenterstudie und schliesslich einer 5-jährigen Qualitätskontrollstudie wird gezeigt, dass diese "Schweizer"-Technik allen Anforderungen zur Durchführung einer "idealen" Anastomose gerecht wird und an fast allen intestinalen Lokalisationen verwendet werden kann.


2020 ◽  
pp. 67-78
Author(s):  
Nandan Kumar ◽  
Sainath Shrikant Pawaskar

Flash fire caused by electric arc is different than that caused by flammable liquids/fumes or combustible dusts. A suitable protective clothing for protection against electric arc-flash must be designed as per Indian weather conditions. Currently available garments are manufactured using two or three layers of woven/nonwoven combinations to achieve higher Hazard Risk Category (HRC) rating (level 3 and above). However, they are heavy and not comfortable to the end users. Savesplash® is a single layer inherent flame-retardant knitted fabric. Its arc rating was determined using ASTM standards. It achieved arc thermal performance value (ATPV) of 41 cal/cm2, breakopen threshold energy (E_BT) of 42 cal/cm2 and heat attenuation factor (HAF) of 94% when tested as per ASTM F1959/F1959M-14 which translated into an arc rating of 41 cal/cm2. This is equivalent to HRC level 4 ratings as per National Fire Protection Association’s NFPA 70E standard (USA). Further, cut and sewn gloves (HM-100) developed using Savesplash® fabric reinforced with leather on palm area achieved ATPV of 63 cal/cm2 and HAF of 94.5% when tested as per ASTM F2675/F2675M-13.


TAPPI Journal ◽  
2019 ◽  
Vol 18 (2) ◽  
pp. 101-108
Author(s):  
Daniel Varney ◽  
Douglas Bousfield

Cracking at the fold is a serious issue for many grades of coated paper and coated board. Some recent work has suggested methods to minimize this problem by using two or more coating layers of different properties. A discrete element method (DEM) has been used to model deformation events for single layer coating systems such as in-plain and out-of-plain tension, three-point bending, and a novel moving force picking simulation, but nothing has been reported related to multiple coating layers. In this paper, a DEM model has been expanded to predict the three-point bending response of a two-layer system. The main factors evaluated include the use of different binder systems in each layer and the ratio of the bottom and top layer weights. As in the past, the properties of the binder and the binder concentration are input parameters. The model can predict crack formation that is a function of these two sets of factors. In addition, the model can predict the flexural modulus, the maximum flexural stress, and the strain-at-failure. The predictions are qualitatively compared with experimental results reported in the literature.


TAPPI Journal ◽  
2019 ◽  
Vol 18 (2) ◽  
pp. 93-99
Author(s):  
SEYYED MOHAMMAD HASHEMI NAJAFI ◽  
DOUGLAS BOUSFIELD, ◽  
MEHDI TAJVIDI

Cracking at the fold of publication and packaging paper grades is a serious problem that can lead to rejection of product. Recent work has revealed some basic mechanisms and the influence of various parameters on the extent of crack area, but no studies are reported using coating layers with known mechanical properties, especially for double-coated systems. In this study, coating layers with different and known mechanical properties were used to characterize crack formation during folding. The coating formulations were applied on two different basis weight papers, and the coated papers were folded. The binder systems in these formulations were different combinations of a styrene-butadiene latex and mixtures of latex and starch for two different pigment volume concentrations (PVC). Both types of papers were coated with single and double layers. The folded area was scanned with a high-resolution scanner while the samples were kept at their folded angle. The scanned images were analyzed within a constant area. The crack areas were reported for different types of papers, binder system and PVC values. As PVC, starch content, and paper basis weight increased, the crack area increased. Double layer coated papers with high PVC and high starch content at the top layer had more cracks in comparison with a single layer coated paper, but when the PVC of the top layer was low, cracking area decreased. No measurable cracking was observed when the top layer was formulated with a 100% latex layer.


1998 ◽  
Vol 22 (S_3_PMRS_98) ◽  
pp. S3_5-8
Author(s):  
Y. Hirayama ◽  
Y. Honda ◽  
K. Ito ◽  
T. Takeuchi ◽  
M. Futamoto

Reproduction ◽  
2000 ◽  
pp. 43-48 ◽  
Author(s):  
S Meredith ◽  
G Dudenhoeffer ◽  
K Jackson

In the present study, follicles were classified according to the morphology of their granulosa cells. Type B follicles contained only flattened granulosa cells; type B/C follicles had a mixture of flattened and cuboidal granulosa cells in a single layer, and type C follicles had a single layer of cuboidal granulosa cells. The primary objectives of the study were to determine whether 5-bromo-2-deoxyuridine incorporation into type B/C follicles was a marker for initiation of growth and how long type B/C follicles could remain at the same stage before transformation to type C follicles. Female Holtzman rats received bromo-deoxyuridine for 7 days. After the infusion (day minipumps were removed = day 0), rats were ovariectomized on days 0 (n = 9), 30 (n = 8), 90 (n = 8) and 150 (n = 9). The numbers of type B, B/C and C follicles within one ovary were determined using modified fractionator counting. Analysis over all times demonstrated that there were more (P < 0.0001) type B/C (941 +/- 61 per ovary) than type C (140 +/- 18 per ovary) or type B (159 +/- 19 per ovary) follicles. The numbers of type B and type C follicles did not differ from each other at any time. Only one of 34 rats evaluated had bromo-deoxyuridine-labelled type B follicles. On day 150, 57% of the bromo-deoxyuridine-labelled type B/C follicles remained from day 0. It is concluded that (1) DNA synthesis in granulosa cells of type B/C follicles is not a reliable indicator of impending growth; and (2) type B and type B/C follicles are both components of the pool of primordial follicles.


Reproduction ◽  
2000 ◽  
pp. 221-228 ◽  
Author(s):  
HF Irving-Rodgers ◽  
RJ Rodgers

Different morphological phenotypes of follicular basal lamina and of membrana granulosa have been observed. Ten preantral follicles (< 0. 1 mm), and 17 healthy and six atretic antral follicles (0.5-12 mm in diameter) were processed for light and electron microscopy to investigate the relationship the between follicular basal lamina and membrana granulosa. Within each antral follicle, the shape of the basal cells of the membrana granulosa was uniform, and either rounded or columnar. There were equal proportions of follicles </= 4 mm in diameter with columnar basal cells and with rounded basal cells. Larger follicles had only rounded basal cells. Conventional basal laminae of a single layer adjacent to the basal granulosa cells were observed in healthy follicles at the preantral and antral stages. However, at the preantral stage, the conventional types of basal lamina were enlarged or even partially laminated. A second type of basal lamina, described as 'loopy', occurred in about half the preantral follicles and in half the antral follicles </= 4 mm diameter. 'Loopy' basal laminae were not observed in larger follicles. 'Loopy' basal laminae were composed of basal laminae aligning the basal surface of basal granulosa cells, but with additional layers or loops often branching from the innermost layer. Each loop was usually < 1 microm long and had vesicles (20-30 nm) attached to the inner aspect. Basal cellular processes were also common, and vesicles could be seen budding off from these processes. In antral follicles, conventional basal laminae occurred in follicles with rounded basal granulosa cells. Other follicles with columnar cells, and atretic follicles, had the 'loopy' basal lamina phenotype. Thus, follicles have different basal laminae that relate to the morphology of the membrana granulosa.


Sign in / Sign up

Export Citation Format

Share Document