scholarly journals Recent advances in Nanocrystal

2020 ◽  
Vol 11 (4) ◽  
pp. 5791-5796
Author(s):  
Nikhil S Bhujbal ◽  
Binoy Varghese Cheriyan
Keyword(s):  
Spray Drying ◽  
Water Solubility ◽  
Aqueous Solubility ◽  
Therapeutic Effects ◽  
New Techniques ◽  
Rate Of Dissolution ◽  
New Chemical Entities ◽  
Particulate Size ◽  
Low Solubility ◽  
Nano Size

The biggest challenge in the discovery and fabrication of drugs nowadays is low solubility. Many new chemical entities have major therapeutic effects, increased performance, but due to poor water solubility their clinical applications are limited. This is why Nanocrystal technology to solve the issue of low aqueous solubility was established. Nanocrystal technology improves the rate of dissolution according to the surface area of the active medicinal substance by reducing its particulate size to the nano size level, maintaining the pharmaceutical crystal morphology and enhancing pharmacokinetic and pharmacodynamic properties of different types of pharmaceuticals. Nanocrystals are prepared using the method down, up and down, spray drying and thus new techniques. Nanocrystals loaded as tablet or capsule. The obtained nanocrystal can be managed in different ways. Using freeze-drying or spray-drying to produce powder, which then is used for tabletting or other oral product, may usually be dried with nanocrystal.

scholarly journals The Role of Cyclodextrins in the Design and Development of Triterpene-Based Therapeutic Agents

2022 ◽  
Vol 23 (2) ◽  
pp. 736
Author(s):  
Alexandra Prodea ◽  
Alexandra Mioc ◽  
Christian Banciu ◽  
Cristina Trandafirescu ◽  
Andreea Milan ◽  
...  
Keyword(s):  
Water Solubility ◽  
Therapeutic Potential ◽  
Underlying Mechanism ◽  
Biological Behavior ◽  
Therapeutic Effects ◽  
Practical Applications ◽  
Starch Derivatives ◽  
Solubility Enhancers ◽  
Low Solubility

Triterpenic compounds stand as a widely investigated class of natural compounds due to their remarkable therapeutic potential. However, their use is currently being hampered by their low solubility and, subsequently, bioavailability. In order to overcome this drawback and increase the therapeutic use of triterpenes, cyclodextrins have been introduced as water solubility enhancers; cyclodextrins are starch derivatives that possess hydrophobic internal cavities that can incorporate lipophilic molecules and exterior surfaces that can be subjected to various derivatizations in order to improve their biological behavior. This review aims to summarize the most recent achievements in terms of triterpene:cyclodextrin inclusion complexes and bioconjugates, emphasizing their practical applications including the development of new isolation and bioproduction protocols, the elucidation of their underlying mechanism of action, the optimization of triterpenes’ therapeutic effects and the development of new topical formulations.

scholarly journals Drug Solubility: Importance and Enhancement Techniques

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Ketan T. Savjani ◽  
Anuradha K. Gajjar ◽  
Jignasa K. Savjani
Keyword(s):  
Crystal Engineering ◽  
Water Solubility ◽  
Aqueous Solubility ◽  
Systemic Circulation ◽  
Formulation Development ◽  
Particle Size Reduction ◽  
New Chemical Entities ◽  
Poorly Soluble ◽  
Physical And Chemical ◽  
Site Of Absorption

Solubility, the phenomenon of dissolution of solute in solvent to give a homogenous system, is one of the important parameters to achieve desired concentration of drug in systemic circulation for desired (anticipated) pharmacological response. Low aqueous solubility is the major problem encountered with formulation development of new chemical entities as well as for the generic development. More than 40% NCEs (new chemical entities) developed in pharmaceutical industry are practically insoluble in water. Solubility is a major challenge for formulation scientist. Any drug to be absorbed must be present in the form of solution at the site of absorption. Various techniques are used for the enhancement of the solubility of poorly soluble drugs which include physical and chemical modifications of drug and other methods like particle size reduction, crystal engineering, salt formation, solid dispersion, use of surfactant, complexation, and so forth. Selection of solubility improving method depends on drug property, site of absorption, and required dosage form characteristics.

Solubility Enhancement of Poorly Soluble Drug Simvastatin by Solid Dispersion Technique

2016 ◽  
Vol 2 (2) ◽  
pp. 91-95
Author(s):  
Neelima Rani T ◽  
Pavani A ◽  
Sobhita Rani P ◽  
Srilakshmi N
Keyword(s):  
Dissolution Rate ◽  
Drug Carrier ◽  
Solid Dispersions ◽  
Aqueous Solubility ◽  
Onset Of Action ◽  
Kneading Method ◽  
Wetting Property ◽  
Poorly Soluble ◽  
Dispersion Technique ◽  
Low Solubility

This study aims to formulate solid dispersions (SDs) of Simvastatin (SIM) to improve the aqueous solubility, dissolution rate and to facilitate faster onset of action. Simvastatin is a BCS class II drug having low solubility & therefore low oral bioavailability. In the present study, SDs of simvastatin different drug-carrier ratios were prepared by kneading method. The results showed that simvastatin solubility & dissolution rate enhanced with polymer SSG in the ratio 1:7 due to increase in wetting property or possibly may be due to change in crystallinity of the drug.

Self-microemulsion Technology for Water-insoluble Drug Delivery

2019 ◽  
Vol 15 (6) ◽  
pp. 576-588 ◽  
Author(s):  
Beibei Yan ◽  
Yu Gu ◽  
Juan Zhao ◽  
Yangyang Liu ◽  
Lulu Wang ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Drug Delivery Systems ◽  
Aqueous Solubility ◽  
Delivery Systems ◽  
Poorly Soluble Drugs ◽  
New Chemical Entities ◽  
Poorly Soluble ◽  
Water Insoluble Drug ◽  
Semi Solid ◽  
Solidification Technology

: According to the drug discovery, approximately 40% of the new chemical entities show poor bioavailability due to their low aqueous solubility. In order to increase the solubility of the drugs, self-micro emulsifying drug delivery systems (SMEDDS) are considered as an ideal technology for enhancing the permeability of poorly soluble drugs in GI membranes. The SMEDDS are also generally used to enhance the oral bioavailability of the hydrophobic drugs. At present, most of the self-microemulsion drugs are liquid dosage forms, which could cause some disadvantages, such as the low bioavailability of the traditional liquid SMEDDS. Therefore, solid self-micro emulsifying drug delivery systems (S-SMEDDS) have emerged widely in recent years, which were prepared by solidifying a semi-solid or liquid self-emulsifying (SE) ingredient into a powder in order to improve stability, treatment and patient compliance. The article gives a comprehensive introduction of the study of SMEDDS which could effectively tackle the problem of the water-insoluble drug, especially the development of solidification technology of SMEDDS. Finally, the present challenges and the prospects in this field were also discussed.

Aqueous solubility of Pb at equilibrium with hydroxypyromorphite over a range of phosphate concentrations

2021 ◽  
Author(s):  
Yuting Zhou ◽  
Xinxin Li ◽  
Murray B. McBride
Keyword(s):  
Aqueous Solubility ◽  
Phosphate Mineral ◽  
Low Solubility

Hydroxypyromorphite (HPM) is a low-solubility Pb phosphate mineral that has the potential to limit solubility and bioavailability of Pb in soils and water.

scholarly journals A Novel In Vitro Approach for Simultaneous Evaluation of CYP3A4 Inhibition and Kinetic Aqueous Solubility

2014 ◽  
Vol 20 (2) ◽  
pp. 254-264 ◽  
Author(s):  
José Pérez ◽  
Caridad Díaz ◽  
Francisco Asensio ◽  
Alexandra Palafox ◽  
Olga Genilloud ◽  
...  
Keyword(s):  
Drug Discovery ◽  
Physicochemical Properties ◽  
Safety Concern ◽  
Aqueous Solubility ◽  
Cyp3a4 Inhibition ◽  
Use Of Resources ◽  
Simultaneous Evaluation ◽  
New Chemical Entities ◽  
Further Development

In the early stages of the drug discovery process, evaluation of the drug metabolism and physicochemical properties of new chemical entities is crucial to prioritize those candidates displaying a better profile for further development. In terms of metabolism, drug–drug interactions mediated through CYP450 inhibition are a significant safety concern, and therefore the effect of new candidate drugs on CYP450 activity should be screened early. In the initial stages of drug discovery, when physicochemical properties such as aqueous solubility have not been optimized yet, there might be a large number of candidate compounds showing artificially low CYP450 inhibition, and consequently potential drug–drug interaction toxicity might be overlooked. In this work, we present a novel in vitro approach for simultaneous evaluation of CYP3A4 inhibition potential and kinetic aqueous solubility (NIVA-CYPI-KS). This new methodology is based on fluorogenic CYP450 activities and turbidimetric measurements for compound solubility, and it provides a significant improvement in the use of resources and a better understanding of CYP450 inhibition data.

Ultrafine carbamazepine nanoparticles with enhanced water solubility and rate of dissolution

RSC Advances ◽  
2014 ◽  
Vol 4 (89) ◽  
pp. 48101-48108 ◽  
Author(s):  
Raj Kumar ◽  
Prem Felix Siril
Keyword(s):  
Water Solubility ◽  
Rate Of Dissolution

Solubility of carbamazepine (CBZ) nanoparticles and CBZ–PVP nanoparticles was 11.9 and 21.5 times higher than the raw–CBZ.

A Review on Formulation and Development of Solid Self-Nano Emulsifying Drug Delivery Systems

2021 ◽  
Vol 14 (4) ◽  
pp. 5519-5228
Author(s):  
Sunitha M Reddy ◽  
Sravani Baskarla
Keyword(s):  
Drug Delivery ◽  
Dissolution Rate ◽  
Drug Delivery System ◽  
Delivery System ◽  
Drug Delivery Systems ◽  
Water Solubility ◽  
Drug Loading ◽  
Aqueous Solubility ◽  
Delivery Systems ◽  
Particle Size Reduction

This article describes current strategies to enhance aqueous solubility and dissolution rate of poor soluble drugs. Most drugs in the market are lipophilic with low or poor water solubility. There are various methods to enhance solubility: co-solvency, particle size reduction, salt formation and Self Nanoemulsifying drug delivery systems, SEDDS is a novel approach to enhance solubility, dissolution rate and bioavailability of drugs. The study involves formulation and evaluation of solid self-Nano emulsifying drug delivery system (S-SNEDDS) to enhance aqueous solubility and dissolution rate. Oral route is the most convenient route for non-invasive administration. S-SNEDDS has more advantages when compared to the liquid self-emulsifying drug delivery system. Excipients were selected depends upon the drug compatibility oils, surfactants and co surfactants were selected to formulate Liquid SNEDDS these formulated liquid self-nano emulsifying drug delivery system converted into solid by the help of porous carriers, Melted binder or with the help of drying process. Conversion process of liquid to solid involves various techniques; they are spray drying; freeze drying and fluid bed coating technique; extrusion, melting granulation technique. Liquid SNEDDS has a high ability to improve dissolution and solubility of drugs but it also has disadvantages like incompatibility, decreased drug loading, shorter shelf life, ease of manufacturing and ability to deliver peptides that are prone to enzymatic hydrolysis.  

The Emerging Role of Nanosuspensions for Drug Delivery and Stability

2021 ◽  
Vol 12 ◽  
Author(s):  
Hitesh Kumar Dewangan
Keyword(s):  
Water Solubility ◽  
Size Range ◽  
Aqueous Solubility ◽  
Active Surface ◽  
Water Soluble ◽  
Active Surface Area ◽  
Specific Interest ◽  
Advanced Therapies ◽  
Processing Techniques

: Poor solubility of some medicinal compounds is a serious challenge that can be addressed by using a nano-suspension for improved delivery. The nanoparticles enhance the bioavailability along with the aqueous solubility of the drug, which is accomplished by increasing the active surface area of the drug. The gained attention of the nanosuspension is due to its stabilization facility, which is achieved by polymers, such as polyethylene glycol (PEG), having a particular size range of 10 - 100 nm. Hence, these nanoparticles have the capacity of binding to the targeted with very low damage to the healthy tissues. These are prepared by various methods, such as milling, high-pressure homogenization, and emulsification, along with melt emulsification. Moreover, surface modification and solidification have been used to add specific properties to the advanced therapies as post-processing techniques. For many decades, it has been known that water solubility hampers the bioavailability and not all drugs are water-soluble. In order to combat this obstacle, nanotechnology has been found to be of specific interest. For elevating the bioavailability by increasing the dissolution rate, the methodology of reduction of the associated drug particles into their subsequent submicron range is incorporated. For oral and non-oral administration, these nanosuspension formulations are used for the delivery of drugs.

scholarly journals REVIEW ARTICLE: SOLUBILITY ENHANCEMENT BY SOLID DISPERSION

2017 ◽  
Vol 9 (3) ◽  
pp. 15
Author(s):  
A. N. Patil ◽  
D. M. Shinkar ◽  
R. B. Saudagar
Keyword(s):  
Solid Dispersion ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Full Potential ◽  
Drug Selection ◽  
Formulation Development ◽  
Poorly Water Soluble Drugs ◽  
New Chemical Entities ◽  
Water Soluble Drugs ◽  
Poorly Water Soluble

Enhancement of solubility, dissolution rate and bioavailability of the drug is a very challenging task in drug development, nearly 40% of the new chemical entities currently being discovered are poorly water soluble drugs. The solubility behaviour of the drugs remains one of the most challenging aspects in formulation development. This results in important products not reaching the market or not achieving their full potential. Solid dispersion is one of the techniques adopted for the formulation of such drugs and various methods are used for the preparation of solid dispersion. Solid dispersion is generally prepared with a drug which is having poor aqueous solubility and hydrophilic carrier. This article review various methods and concept of solid dispersion, criteria for drug selection, advantage and disadvantage, characterization, and application.

Sign in / Sign up

Export Citation Format

Share Document