scholarly journals PROMISING EARLY PLANTING AND STRESS-TOLERANT POTATO GENOTYPES FOR NORTHERN BANGLADESH

2020 ◽  
Vol 5 (1) ◽  
pp. 16-20
Author(s):  
M.N. Amin ◽  
B.C. Kundub ◽  
M. Rahman ◽  
M.M. Rahman ◽  
M.M. Uddin
Keyword(s):  
Tuber Yield ◽  
Block Design ◽  
Potato Production ◽  
Yield Reduction ◽  
Marketable Tuber ◽  
Growing Seasons ◽  
Randomized Complete Block Design ◽  
Northern Regions ◽  
Disease Pressure ◽  
Main Effects

Potato is the third major food crop in the world. In Northern Bangladesh, potato production outside the regular growing season can contribute to farmers’ profit and prices can be very favorable as consumers’ demand for potatoes is greater than the decreased, off-season supply. However, potato production may be negatively affected by increased pest and disease pressure and higher soil temperature. We hypothesized that some potato varieties would have smaller tuber yield reduction when they are grown outside the normal season. The objective of this experiment was to find out promising genotypes for earlier cultivation prior to mid of November, cultivation in northern regions of Bangladesh. The trials, corresponding to very early, early, normal and late growing seasons were planted using a randomized complete block design with three replications. Germination percent, plant height, stems per hill, marketable tuber yield at 65 days, marketable tuber yield at 90 days were recorded. For yield and components of yield contributing characters Clone 13.17, BARI Alu 7(Diamant) and Arizona outperformed in all growing condition and had wider adaptability and stability of tuber yield based on Additive main effects and multiplicative interaction (AMMI).

scholarly journals Tuber yield and economic result of ‘Atlantic’ potato in response to NPK fertilizer formulas

2019 ◽  
Vol 37 (4) ◽  
pp. 379-383
Author(s):  
Renato Yagi ◽  
Rogério P Soratto ◽  
Nilceu RX de Nazareno ◽  
Henrique L da Silva ◽  
Alexandre de C Dzierwa
Keyword(s):  
Specific Gravity ◽  
Soil Fertility ◽  
Tuber Yield ◽  
Potato Crop ◽  
Block Design ◽  
Operational Efficiency ◽  
Marketable Tuber ◽  
Randomized Complete Block Design ◽  
Npk Fertilizer ◽  
Fertilizer Rates

ABSTRACT The usual application of high 4-14-8 NPK fertilizer rates in the potato planting furrows, independently of the soil fertility or nutritional cultivar requirements, has become a paradigm in Brazil. However, the 4-14-8 NPK formula does not always meet the crop needs, and can unbalance the availability of nutrients in the soil. The objective of this study was to evaluate the tuber yield and economic results of ‘Atlantic’ potato as affected by rates of 4-14-8 and 6-30-6 NPK formulas applied in the planting furrows. The rates of both NPK formulas were calculated to reach P2O5 rates of 210, 420, and 630 kg ha-1. At each P2O5 rate, the 6-30-6 formula resulted in less 30% N and 65% K2O in the planting furrow compared to 4-14-8 formula. A randomized complete block design in a factorial scheme (2×3)+1, including an unfertilized furrow control, with three replications was used. Only the use of 6-30-6 formula increased the total tuber yield of ‘Atlantic’ potato. The marketable tuber yield reached higher levels (29.8 t ha-1) with higher P2O5 rate (440 kg ha-1) using the 6-30-6 than 4-14-8 formula. The fertilizer rates and formulas NPK did not affect specific gravity of marketable tubers. Therefore, the use of a fertilizer more concentrated in P2O5 that favors smaller contributions of N and K (as the 6-30-6 formula studied in this work) provides lower costs, and greater operational efficiency and profits in relation to the 4-14-8 formula traditionally used for the potato crop.

scholarly journals Selection of Chilean potato clones for tuber yield, frying quality, plant vigor and vegetative cycle

2020 ◽  
Vol 38 (2) ◽  
pp. 217-223
Author(s):  
Giovani O da Silva ◽  
Caroline M Castro ◽  
Fernanda Q Azevedo ◽  
Arione S Pereira ◽  
Agnaldo DF de Carvalho ◽  
...  
Keyword(s):  
Tuber Yield ◽  
Agricultural Research ◽  
Block Design ◽  
Yield Potential ◽  
Breeding Programs ◽  
Marketable Tuber ◽  
Plant Vigor ◽  
Randomized Complete Block Design ◽  
Vegetative Cycle ◽  
Selection Of

ABSTRACT The objective of this study was to evaluate the yield potential, frying quality, plant vigor, and vegetative cycle of Chilean potato clones, aiming to identify those with potential to become new cultivars or to be used in breeding programs. The experiments were conducted in Pelotas-RS and Canoinhas-SC, Brazil, in spring 2017. A set of 37 advanced potato clones belonging to the Agricultural Research Institute of Chile (INIA) was compared to commercial cultivars Agata, Asterix and Atlantic. A randomized complete block design with three replications of two rows with 10 plants each was used. Tuber yield, frying quality, plant vigor and vegetative cycle traits were evaluated. The data were submitted to analysis of variance, test for grouping means, and the selection differential. In this set of clones there are some presenting superior quality in relation to marketable tuber yield and frying quality, but the vegetative cycle was not shorter nor plant vigor was lower. Clones CH 27 and CH 44 were the best for marketable tuber yield and frying quality at both locations.

scholarly journals Effects of planting techniques on tuber yield of potato under charland ecosystem

2016 ◽  
Vol 27 (2) ◽  
pp. 144-148
Author(s):  
MA Hossain ◽  
MK Islam ◽  
MUS Khatun ◽  
MM Sultana ◽  
MR Ali
Keyword(s):  
Sustainable Development ◽  
Tuber Yield ◽  
Block Design ◽  
Potato Production ◽  
Energy Development ◽  
Rabi Season ◽  
Gross Margin ◽  
Double Row ◽  
Agriculture Sector ◽  
Randomized Complete Block Design

Sustainable development in potato production is an issue of growing concern. Today, population growth, the need to further the cause of human food, agricultural and energy development in the agriculture sector is. Excessive consumptionof food demand huge population the lack of stability in the future willproduce. The effect of planting technique on the yield of potato at charland ecosystem  has  been  investigated.  A field experiment was conducted at the MLT site Ulipur during rabi season 2012-13 and 2013-14 to observe the suitable planting techniques on tuber yield of potato at charland ecosystem. Four planting techniques viz., recommended system of planting (60cm×30cm), Single eye planting(30cm×10cm), Single eye double row zigzag system(10cm/30cm×10cm), and Half cut system(30cm×10cm),  were evaluated for this purpose. The experiment was laid out in a randomized complete block design with six dispersed replications. Among the tested planting techniques, the highest tuber yield (29.0 t ha-1) was obtained from recommended system of planting and the lowest yield was obtained from single eye planting (22.5t ha-1) system. The highest gross return (Tk.217500 ha-1) and gross margin (Tk.75000 ha-1) were obtained from recommended system of planting.Progressive Agriculture 27 (2): 144-148, 2016

scholarly journals Effect of plastic mulches on growth and yield of potato (Solanum tuberosum L.) in Dadeldhura, Nepal

2020 ◽  
Vol 3 (2) ◽  
pp. 228-240
Author(s):  
Manoj Bhatta ◽  
Bhimsen Shrestha ◽  
Ananta Raj Devkota ◽  
Khem Raj Joshi ◽  
Sabin Bhattarai ◽  
...  
Keyword(s):  
Tuber Yield ◽  
Growth Parameters ◽  
Solanum Tuberosum L ◽  
Block Design ◽  
Potato Production ◽  
Quality Parameters ◽  
Growth And Yield ◽  
Plastic Mulch ◽  
Marketable Tuber ◽  
Black Plastic

A field experiment was conducted from February to June, 2020 at Bhatkanda, Dadeldhura, Nepal to assess the effectiveness of plastic mulches in potato production. The experiment was laid out in Randomized Complete Block Design (RCBD) with four replications comprising of five treatments viz: T1: white plastic mulch (white on black colored), T2: silver plastic mulch (silver on black colored), T3: perforated black plastic mulch, T4: black plastic mulch and T5: control (without mulch). Results revealed that the black plastic mulch significantly increased the rate of emergence while perforated black plastic exhibited highest values of all other studied growth parameters, yield components and quality parameters. The highest marketable tuber yield was obtained in perforated black plastic (6.05 kg/m2) followed by silver plastic (5.62 kg/m2), white plastic (5.46 kg/m2), black plastic (5.14 kg/m2) and lowest marketable tuber yield was obtained in control condition (4.07 kg/m2). Similarly, temperature difference between controlled and mulched condition at 15 cm depth of soil was observed up to 2.8°C with its highest value in black plastic mulch and lowest in control condition. The perforated black plastic mulch was found most economical with maximum value of net return (NRs. 1904.31 thousands/ha) and B: C ratio (5.83). This study concludes that the use of perforated black plastic mulch is most economical with optimum plant growth and yield, producing best quality potatoes under climatic condition of Dadeldhura, Nepal.

Nitrogen Requirement of Potato for Eastern Indo-Gangatic Plain of India

2020 ◽  
Vol 7 (03) ◽  
Author(s):  
S. K. YADAV ◽  
R. K. SINGH ◽  
V. K. DUA ◽  
S SINGH ◽  
SARALA YADAV ◽  
...  
Keyword(s):  
Tuber Yield ◽  
Potato Crop ◽  
Block Design ◽  
Nitrogen Level ◽  
Cost Ratio ◽  
Research Station ◽  
Net Benefit ◽  
Marketable Tuber ◽  
Benefit Cost Ratio ◽  
Significant Difference

A field experiment was carried out during 2015-16 and 2016-17 at ICAR-Central Potato Research Station, Patna, Bihar, in randomized block design with four replications with objective to quantity the optimum requirement of nitrogen to potato crop. Significantly the highest plant height was recorded with nitrogen level of 300 kg/ha. Distributions of the smallest size of tuber yield of potato were decreasing with increasing the level of nitrogen. There was about 26.0% more yield of the smallest size tuber of potato was recorded with zero nitrogen as compare to the highest level of nitrogen i.e. 300 kg/ha. Increasing the nitrogen over the level of 150 to 225 kg per hectare, increasing the yield of tuber gradually slower rate than nitrogen level from 0 to 150 kg/ha. Total and marketable tuber yield of potato were increasing significantly with increasing level of nitrogen up to 150 kg/ha. There was no significant difference in marketable tuber yield was found for nitrogen level between 150 and 225 kg/ha. Highest (1.66) net benefit cost ratio was also recorded with level of nitrogen @ 150 kg/ha in potato. Hence, application of nitrogen @ 150 kg/ha was found statistically and economically more beneficial for potato cultivation in Eastern Indo-Gangatic plain of India.

scholarly journals 282 Effect of formulating diets based on a ratio between STTD Ca and STTD P and the inclusion of phytase on the calcium and phosphorus balance of growing pigs

2020 ◽  
Vol 98 (Supplement_3) ◽  
pp. 103-104
Author(s):  
Vanessa Lagos ◽  
Mike R Bedford ◽  
Hans H Stein
Keyword(s):  
Block Design ◽  
Random Effect ◽  
Growing Pigs ◽  
Diet Formulation ◽  
Randomized Complete Block Design ◽  
Microbial Phytase ◽  
P Utilization ◽  
P Balance ◽  
Main Effects ◽  
P Absorption

Abstract An experiment was conducted to test the hypothesis that formulating diets for pigs based on a ratio between standardized total tract digestible (STTD) Ca and STTD P instead of total Ca and STTD P increases the efficiency of Ca and P utilization. Forty barrows (59.4 ± 3.8 kg) were individually housed in metabolism crates and allotted to 4 corn-soybean meal diets and 2 periods of 11 d in a randomized complete block design. Diets were formulated using a 2 × 2 factorial design with 2 Ca requirement estimates (total Ca or STTD Ca) and 2 inclusion levels of microbial phytase (0 or 500 units/kg). Phytase was assumed to release 0.11% STTD P and 0.16% total Ca. Diets were formulated based on requirements for total Ca and STTD P and the ratio between STTD Ca and STTD P was 1.25:1 in diets formulated based on STTD Ca. Fecal and urine samples were collected from feed provided from d 6 to 9. Data for Ca and P balance were analyzed using a model that included the main effects of diet formulation and phytase level, the interaction between main effects, and the random effect of period. Interactions (P < 0.05) between diet formulation and phytase level were observed for Ca intake, Ca in feces, Ca digestibility, Ca retained as a percentage of intake, P digestibility, P absorbed, and P in urine (Table 1). Despite being provided less (P < 0.05) Ca, pigs fed diets formulated based on STTD Ca did not absorb or retain less Ca than pigs fed total Ca diets, but they absorbed more (P < 0.05) P than pigs fed diets formulated based on total Ca. In conclusion, by formulating diets based on values for STTD Ca, P absorption was increased confirming detrimental effects of oversupplying Ca.

scholarly journals Evaluation of Potato (Solanum tuberosum L.) Varieties for Yield and Some Agronomic Traits

2020 ◽  
Vol 5 (1) ◽  
pp. 63-74
Author(s):  
Lemma Tessema ◽  
Wassu Mohammed ◽  
Tesfaye Abebe
Keyword(s):  
Specific Gravity ◽  
Dry Matter ◽  
Tuber Yield ◽  
Block Design ◽  
Matter Content ◽  
Tuber Quality ◽  
Dry Matter Content ◽  
Marketable Tuber ◽  
Potato Varieties ◽  
Central Highlands

AbstractA field experiment was conducted in the central highlands of Ethiopia to evaluate the performance of potato varieties for tuber yield and to identify a superior variety in tuber yield and yield components. The experiment was laid out in a randomized complete block design with three replications at two locations in the central highlands of Ethiopia during the 2017 main cropping season. The results of analysis of variance (ANOVA) showed the presence of highly significant (P<0.01) differences among varieties over all traits studied. The mean squares for location were also significant in indicating the influence of environments on the traits of the studied varieties. However, the interaction between variety and environment had no significant effect on the performances of the potato varieties to attain 50% flowering, specific gravity and dry matter content indicating a similar performance of these traits across all locations. The variety Belete produced the maximum total tuber yield of 32.8 t ha -1 and marketable tuber yield of 29.1 t ha-1. Conversely, farmers` variety Nech Abeba produced the minimum total tuber yield of 13.8 t ha-1 and marketable tuber yield of 8.4 t ha-1. For most tuber quality traits, viz., tuber specific gravity, dry matter content, starch percentage and total starch yield, varieties Belete and Menagesha were the maximum and minimum producers, respectively. Thus, it could be concluded that varietal and environmental variations as well as their interaction had considerable influence on tuber yield and the potato’s attributes.

scholarly journals Tuber yield and nutrient balance of potato (Solanum tuberosum L.) Cultivation as influenced by different nutrients management under AEZ-28

2015 ◽  
Vol 39 (4) ◽  
pp. 641-659
Author(s):  
MAHS Jahan ◽  
MAR Sarkar ◽  
NCD Barma ◽  
MNA Mondal ◽  
MNS Ferdousi
Keyword(s):  
Nutrient Management ◽  
Tuber Yield ◽  
Agricultural Research ◽  
Management Practice ◽  
Solanum Tuberosum L ◽  
Block Design ◽  
Nutrient Balance ◽  
Research Centre ◽  
Gross Margin ◽  
Randomized Complete Block Design

A field experiment was conducted at Regional Wheat Research Centre of the Bangladesh Agricultural Research Institute, Joydebpur, Gazipur for 2 consecutive years during 2006-07 and 2007-08. The objectives were to find out the optimum nutrient management practice on tuber yield, nutrient balance and economics of potato cultivation. Twelve nutrient management treatments were tested in a randomized complete block design with 3 replications. Treatments were T1=HYG (0-198-44-194-24-6-1.2), T2=MYG (0-140-34-138-18-4.5-0.9), T3=IPNS (10000-168-38-170-18-6-1.2), T4=STB (0-171-40-164-22-5-1), T5=FP (0-97-16-91-0-0-0), T6=CON (0-0-0-0-0-0-0), T7=HYG+CRI, T8=MYG+CRI, T9=IPNS+CRI, T10=STB+CRI, T11=FP+CRI, T12=CON+CRI kg ha-1 CDNPKSZnB for potato. The highest tuber yield of potato was obtained from STB+CRI (27.64 t ha-1) followed by IPNS+CRI (27.35 t ha-1), STB (27.10 t ha-1), IPNS (26.83 t ha-1), HYG+CRI (26.52 t ha-1) and HYG (26.10 t ha-1) in 2006- 07. Similar trend was found in 2007-08. The highest tuber yield and yield contributing parameters were noticed in CRI plots than without CRI. Except N, remaining nutrient balance like P K S Zn and B were found positive in case of HYG, MYG, IPNS and STB along with or without CRI nutrient managements. The balance was found almost negative in case of FP and CON. The highest BCR was observed in STB+CRI (3.96) followed by STB (3.93), IPNS+CRI (3.76), and IPNS (3.74). The higher gross return (Tk. 283331 ha-1) and also gross margin (Tk. 211761 ha-1) was observed from the same treatment. DOI: http://dx.doi.org/10.3329/bjar.v39i4.22544 Bangladesh J. Agril. Res. 39(4): 641-659, December 2014

scholarly journals Wines produced with 'Cabernet Sauvignon' grapes from the region of Bagé in the state of Rio Grande do Sul, Brazil

2017 ◽  
Vol 52 (5) ◽  
pp. 311-318
Author(s):  
Renata Gimenez Sampaio Zocche ◽  
Suziane Antes Jacobs ◽  
Norton Victor Sampaio ◽  
Velci Queiróz de Souza ◽  
Ivan Ricardo Carvalho ◽  
...  
Keyword(s):  
Reducing Sugars ◽  
Block Design ◽  
Cabernet Sauvignon ◽  
Color Intensity ◽  
Total Polyphenols ◽  
Growing Seasons ◽  
Sodium Calcium ◽  
Randomized Complete Block Design ◽  
Total Anthocyanins ◽  
Calcium Magnesium

Abstract: The objective of this work was to characterize 'Cabernet Sauvignon' wines made from grapes cultivated in the region of Bagé, RS, Brazil, during three crop seasons. A randomized complete block design was carried out with three treatments and three replicates.The evaluations were performed for the 2004, 2007, and 2008 growing seasons. 'Cabernet Sauvignon' wines of the 2004, 2008, and 2009 harvests differed for the following parameters: density, alcoholic content, total acidity, pH, reducing sugars, OD 420, 520, and 620, color intensity, total anthocyanins, total polyphenols, sodium, calcium, magnesium, manganese, copper, iron, rubidium, phosphorus, methanol, propanol, 2-methyl-l-propanol, 2, 3 - methyl-l-butanol, and sum of alcohols. 'Cabernet Sauvignon' has potential to be produced in the Bagé region, and to help it to become a wine growing region in Brazil.

scholarly journals Performance of potato (Solanum tuberosum L.) varieties with and without straw-mulch at Shankharapur, Kathmandu, Nepal

2020 ◽  
Vol 3 (2) ◽  
pp. 193-204
Author(s):  
Kalyani Shrestha ◽  
Shrawan Kumar Sah ◽  
Reeti Singh ◽  
Yam Narayan Devkota
Keyword(s):  
Tuber Yield ◽  
Solanum Tuberosum L ◽  
Block Design ◽  
Medium Size ◽  
Tuber Weight ◽  
Potato Varieties ◽  
Straw Mulch ◽  
Crop Varieties ◽  
Randomized Complete Block Design ◽  
Benefit Cost

The suitability of crop varieties in a particular location determines the productivity of crops. A field experiment was conducted from February to May 2020 at Shankharapur, Kathmandu, Nepal to evaluate the growth and productivity of potato varieties with and without mulch. Five potato varieties (Cardinal, Janakdev, Khumal Bikas, MS- 42.3, Panauti Local) were evaluated under straw-mulch and no-mulch conditions. The treatments were arranged in two factorial Randomized Complete Block Design (RCBD) with 3 replications. The results revealed that the highest tuber yield was produced by Janakdev (34.29 t ha-1) followed by Panauti Local (29.52 t ha-1). Similarly, straw-mulch gave higher yield (25.9 t ha-1) as compared with no mulch condition (21.73 t ha-1). The higher tuber yield in the Janakdev and Panauti Local was because of higher tuber weight per hill, higher number and weight of medium size (50 -100 g) and oversize (> 100 g) tuber per hill. Similarly, higher yield in straw mulch was due to higher number and weight of tuber per hill. Higher gross return, net return was observed and the benefit cost ratioin varieties Janakdev (4.08) and Panauti Local (3.53) and rice straw mulch (2.88). Therefore, potato varieties Janakdev and Panauti Local with straw mulch are most suitable for Kathmandu like climate for improving productivity and profitability.

Sign in / Sign up

Export Citation Format

Share Document