scholarly journals Influence of the Load Distribution And Sizes on the Wheel Geometry in Passenger Cars

Author(s):  
Jarosław Gonera ◽  
Jerzy Napiórkowski ◽  
Kamil Ciborowski

This paper discusses impact of changes in the load size and distribution in passenger cars on geometry of the suspension and steering systems. It was found to have a major impact on the road safety. The research was carried out with the four most popular suspension system designs used in modern passenger cars, i.e. multi-link suspension on both front and rear axles, only on the front axle, only on the rear axle and a simple suspension design for both front and rear axles. Eight load variants were used for the tests. Changes in the following wheel geometry parameters were identified: toe-in and camber angles of all the wheels and castors for the front wheels. The numerical relationships were determined between the load distribution and sizes and changes in suspension and steering systems in passenger cars. It was found that cars with multi-link suspension in both front and rear axles adapt best to changes in weight and load distribution.

2018 ◽  
Vol 19 (12) ◽  
pp. 217-220
Author(s):  
Michał Rubach ◽  
Konrad Waluś

The appearance of slush on the road is determined by the intensity of precipitation, ambient temperature, surface and dew point temperature, atmospheric pressure and road traffic. The condition of slush (mixture of snow, ice, sand and chemicals such as salt) significantly affects the scope of road safety and the acceleration achieved in the driving processes. The agglomeration of slush in the space between the wheel and the wheel arches increases the resistance of the vehicle movement and increases the load on the suspension system and the steering. Excess snow and ice increases the risk of damage to these systems and may affect the steering and stability of the vehicle. The process of "deposition" of slush is particularly noticeable in environmental conditions with high humidity, and ambient and surface temperatures are below zero degrees Celsius. The article presents the idea of a system for removing slush from wheelhouse liners.


2021 ◽  
pp. 107-110
Author(s):  
О.О. Марокко

В статье рассматриваются некоторые социально-психологические аспекты повышения эффективности социальной рекламы в области безопасности дорожного движения. Автором отмечено, что для достижения цели субъект пропаганды дол- жен осознать взаимосвязь между его индивидуальным поведением на дороге и надежностью всей системы жизнеобеспечения. The article discuses some of the socio-psychological aspects of increasing of social advertising in the field of road safety. The author notes that in order to achieve the goal, the subject of propaganda must aware of the relationship between his individual behavior on the road and the reliability of the entire life support system.


2015 ◽  
Vol 77 (29) ◽  
Author(s):  
Nassiriah Shaari ◽  
Aeni Zuhana Saidin ◽  
Asmidah Alwi

Road safety campaigns and programs have been extensively introduced and implemented in Malaysia. However, their effectiveness is still being debated. Children especially will become the unfortunate victims of road accidents if they are unaware of the danger and precaution actions to be safe on the road. In response to that, this paper introduces an application as an alternative that inculcates road safety awareness to further support existing related programs and campaigns. Particularly, an interactive web application incorporating interactive multimedia elements has been designed and evaluated. Results on the usability test indicate a promising success and highlight aspects and issues that can be further focused for improvement and enhancement. 


2016 ◽  
Vol 4 (1) ◽  
pp. 10-16
Author(s):  
Miloš Poliak ◽  
◽  
Štefánia Semanová ◽  
Peter Varjan

The paper deals with the issue of efficiency of financial support for public passenger transport from public funds from the perspective of improving road safety. The aim is to verify the hypothesis that financing public passenger transport from public funds is a significant tool to influence the number of passengers carried by individual automobile transport, and thus it can be a tool for influencing road safety in a particular territory. The first part of the paper analyses the sources for financial support of public passenger transport. The last part analyses possible impacts of financing public passenger transport on the road safety in relation to the specified hypothesis.


Author(s):  
C. C. Osadebe ◽  
H. A. Quadri

The prevalence of flexible pavement deterioration in the country has been adduced largely by highway researchers to trucks or heavy vehicles carrying much in excess of permitted legal limits. This study investigated levels of deterioration of Abuja-Kaduna-Kano road (Northern region) and Port Harcourt-Enugu road (Southern region) caused by heavy vehicles through a 14 day traffic counts conducted at 5 strategic points each in the Northern and Southern regions. Traffic data generated were analyzed with AASHTO Design Guidelines (1993) to evaluate Equivalent Single Axle Loads (ESALs) and Vehicle Damage effects on the road. The Traffic Volume, Average Daily Traffic (ADT), and Heavy Vehicle per day (HV/day) were estimated to be 2,063,977; 147,427; and 12,246 respectively in the Northern region, while in the Southern region they were estimated to be 750,381; 53,670; and 20,951 respectively. Motorcycles, Passenger cars, Mini-buses/Pick-ups, and Heavy vehicles constitute 18.7%, 49.7%, 23.3% and 8.31% of the total traffic volume respectively in the Northern region while in the South they constitute 4.6%, 30.1%, 26.2% and 39.1% respectively. ESALs were estimated according to AASHTO Design Guidelines in the Northern and Southern regions as 547,730 and 836,208 respectively. An average Load Equivalency Factors (LEFs) of 3.43 and 3.02 were estimated for each heavy vehicle plying the Northern and Southern roads respectively and this could explain some failures (alligator cracks, potholes, depressions, linear or longitudinal cracks along the centre line amongst others) inherent on the road.


2019 ◽  
Vol 12 (2) ◽  
pp. 71-75
Author(s):  
Salem F. Salman

All vehicles are affected by the type of the road they are moving on it.  Therefore the stability depends mainly on the amount of vibrations and steering system, which in turn depend on two main factors: the first is on the road type, which specifies the amount of vibrations arising from the movement of the wheels above it, and the second on is the type of the used suspension system, and how the parts connect with each other. As well as the damping factors, the tires type, and the used sprungs. In the current study, we will examine the effect of the road roughness on the performance coefficients (speed, displacement, and acceleration) of the joint points by using a BOGE device.


Author(s):  
Danilo Valerio ◽  
Fabio Ricciato ◽  
Pavle Belanovic ◽  
Thomas Zemen

Author(s):  
Mekelleche Fatiha ◽  
Haffaf Hafid

Vehicular Ad-Hoc Networks (VANETs), a new mobile ad-hoc network technology (MANET), are currently receiving increased attention from manufacturers and researchers. They consist of several mobile vehicles (intelligent vehicles) that can communicate with each other (inter-vehicle communication) or with fixed road equipment (vehicle-infrastructure communication) adopting new wireless communication technologies. The objective of these networks is to improve road safety by warning motorists of any event on the road (accidents, hazards, possible deviations, etc.), and make the time spent on the road more pleasant and less boring (applications deployed to ensure the comfort of the passengers). Practically, VANETs are designed to support the development of Intelligent Transportation Systems (ITS). The latter are seen as one of the technical solutions to transport challenges. This chapter, given the importance of road safety in the majority of developed countries, presents a comprehensive study on the VANET networks, highlighting their main features.


2012 ◽  
Vol 23 (1) ◽  
pp. 71-82
Author(s):  
Kazimierz Jamroz

Abstract To ensure that road transport safety measures are effective and efficient, forecast tools should be applied to help with strategic decision-making. Models of road safety measures provide such tools. The paper presents a proposed macro model of road accident casualties. The proposed models of road accident fatalities are built from a database covering more than fifty countries worldwide. The concepts of model design can be used for developing factor-based models to describe strategic societal risk on the road networks of selected countries worldwide. One of the concepts was applied to model the number of road accident fatalities. The analyses used Smeed’s model and its modifications developed for the needs of this analysis.


Sign in / Sign up

Export Citation Format

Share Document