scholarly journals A New CPW-fed Patch Antenna for UWB Applications

2017 ◽  
pp. 75-78 ◽  
Author(s):  
Purnima Sharma ◽  
Santosh Kumar Jha ◽  
Partha Pratim Bhattacharya
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Return Loss ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Compact Size ◽  
Uwb Applications

In this paper, the design and analysis of a compact size coplanar waveguide (CPW)-fed antenna for ultrawideband (UWB) applications is presented. The antenna has a compact size of 20×20×1.1 .5 .mm and provides a good impedance matching over the entire bandwidth of 3.2–14.3 GHz. The characteristics parameters, i.e. return loss, VSWR and radiation pattern, are analyzed using HFSS 11.0 software.

Compact stepped slot antenna for ultra-wideband applications

2021 ◽  
pp. 1-7
Author(s):  
B. Hammache ◽  
A. Messai ◽  
I. Messaoudene ◽  
T. A. Denidni
Keyword(s):  
Radiation Pattern ◽  
Impedance Matching ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Back Side ◽  
Compact Size ◽  
Measurement Results ◽  
Operating Bandwidth ◽  
Uwb Applications

Abstract In this paper, a compact stepped slot antenna for ultra-wideband (UWB) applications is proposed. A very small size and UWB bandwidth operation are achieved by integrating a stepped slot in the back side of the antenna. This stepped slot is excited by using a 50 Ω-feed line in the top side of the antenna. The antenna is characterized by an impedance bandwidth between 3.05 GHz and more than 12 GHz. The dimensions of the antenna are 17 mm × 8 mm × 1.27 mm, which leads to the most compact size compared with other works in the literature. The integrated stepped slot is divided into additional elementary slots, where each elementary slot has a matching point. Adding these elementary slots allows to increase further the operating bandwidth. The radiation pattern of the compact stepped slot antenna is omnidirectional in the H-plane and bidirectional in the E-plane. The measurement results agree well with the simulated ones in terms of impedance matching and radiation pattern.

scholarly journals Design of Circular Patch Antenna with Coplanar Waveguide Feed for LTE Application

2020 ◽  
Vol 9 (4) ◽  
pp. 1620-1622
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Conducting Surface ◽  
Circular Patch ◽  
High Frequency Structure Simulator ◽  
Narrow Bandwidth ◽  
Compact Size ◽  
Circular Patch Antenna

In this paper, a circular patch antenna with Coplanar Waveguide (CPW) feed for LTE application is proposed. The proposed antenna design exhibits a decent impedance matching inside the LTE Bands 2.6 GHz. The planar monopole antenna with coplanar waveguide (CPW) feed has been considered here. It has greater advantage over microstrip compose feed lines, low scattering, low radiation spillage, the capacity to successfully control the trademark impedance, and the simplicity of mix. Rogers RT/duroid 5880 is used as substrate having a dielectric constant of 2.2 with a thickness of 1.6 mm and the conducting surface as copper. The proposed antenna obtains a narrow bandwidth in the frequency range of 2.6 GHz. It is suitable for LTE application because of its compact size and less cost to fabrication. The gain and efficiency of this antenna is good. The antenna is designed with the help of High Frequency Structure Simulator (HFSS) software.

scholarly journals A Novel Circular Slotted Microstrip-Fed Patch Antenna with three Triangle Shape Defected Ground Structure for Multiband Applications

2018 ◽  
Vol 7 (3) ◽  
pp. 56-63 ◽  
Author(s):  
A. Jaiswal ◽  
R. K. Sarin ◽  
B. Raj ◽  
S. Sukhija
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Impedance Matching ◽  
Ground Plane ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Resonant Frequencies ◽  
Wireless Applications ◽  
Rectangular Patch ◽  
Miniaturized Antenna

In this paper, a novel circular slotted rectangular patch antenna with three triangle shape Defected Ground Structure (DGS) has been proposed. Radiating patch is made by cutting circular slots of radius 3 mm from the three sides and center of the conventional rectangular patch structure and three triangle shape defects are presented on the ground layer. The size of the proposed antenna is 38 X 25 mm2. Optimization is performed and simulation results have been obtained using Empire XCcel 5.51 software. Thus, a miniaturized antenna is designed which has three impedance bandwidths of 0.957 GHz,  0.779 GHz, 0.665 GHz with resonant frequencies at 3.33 GHz, 6.97 GHz and 8.59 GHz and the corresponding return loss at the three resonant frequencies are -40 dB, -43 dB and -38.71 dB respectively. A prototype is also fabricated and tested. Fine agreement between the measured and simulated results has been obtained. It has been observed that introducing three triangle shape defects on the ground plane results in increased bandwidth, less return loss, good radiation pattern and better impedance matching over the required operating bands which can be used for wireless applications and future 5G applications.

MULTIBAND CPW-FED SLOT ANTENNA FOR WLAN/WIMAX APPLICATIONS

2015 ◽  
Vol 77 (10) ◽  
Author(s):  
Igbafe Orikumhi ◽  
Mohamad Rijal Hamid ◽  
Ali Nyangwarimam Obadiah
Keyword(s):  
Radiation Pattern ◽  
Return Loss ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Slot Antenna ◽  
Frequency Range ◽  
Resonant Frequencies ◽  
Good Agreement

A square slot antenna fed by a coplanar waveguide (CPW) is presented in this paper. The design consist of two pairs of “F” shaped planar strips placed within a square slotted ground. The strips are used to excite multiple resonant frequencies, the strips are connected to the ground plane by means of ideal switches. The proposed antenna has achieved multiple resonant frequencies of 2.4/5.2/5.8 GHz for WLAN and 3.5/5.5 for WiMAX applications. The measured results shows a good agreement with the simulated results in terms of return loss, radiation pattern and gain. The proposed antenna is designed for the frequency range of 2 GHz to 7 GHz which makes it suitable for Bluetooth, WLAN and WiMAX applications. 

scholarly journals A Novel Coplanar Waveguide-Fed Compact Microstrip Antenna for Future 5G Applications

2020 ◽  
Vol 14 (2) ◽  
pp. 104-110
Author(s):  
Mustafa Berkan Bicer
Keyword(s):  
Microstrip Antenna ◽  
Return Loss ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Antenna Design ◽  
Method Of Moment ◽  
Full Wave ◽  
Compact Size ◽  
Compact Microstrip Antenna ◽  
Acs Algorithm

In this study, a coplanar waveguide-fed compact microstrip antenna design for applications operating at higher 5G bands was proposed. The antenna with the compact size of 8 x 12.2 mm2 on FR4 substrate, having the dielectric constant of 4.3 and the height of 1.55 mm, was considered. The dimensions of the radiating patch and ground plane were optimized with the use of artificial cooperative search (ACS) algorithm to provide the desired return loss performance of the designed antenna. The performance analysis was done by using full-wave electromagnetic package programs based on the method of moment (MoM) and the finite integration technique (FIT). The 10 dB bandwidth for return loss results obtained with the use of the computation methods show that the proposed antenna performs well for 5G applications operating in the 24.25 – 27.50 GHz, 26.50 – 29.50 GHz, 27.50 – 28.35 GHz and 37 – 40 GHz frequency bands.

scholarly journals Performance Comparison of Swastika and Rectangular Shaped Microstrip Patch Antenna

2018 ◽  
Vol 1 (1) ◽  
pp. 11-14
Author(s):  
Suroj Burlakoti ◽  
Prakash Rai
Keyword(s):  
Radiation Pattern ◽  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Performance Comparison ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Patch Antennas ◽  
Microstrip Patch Antennas ◽  
Microstrip Patch

In this paper, Microstrip patch antennas with rectangular and swastika shape of patch are designed and its performance parameters are compared with each other. Rectangular and Swastika shaped patch are considered in this paper with common rectangular ground plane. The antenna is simulated at 2.4 GHz using HFSS simulation software. This work mainly includes modification of antenna patch to improve the antenna parameters. The parameters of antenna such as Return loss, VSWR Bandwidth and radiation pattern are compared using simulation. The performance of Swastika shaped antenna was found to be better than rectangular shaped microstrip patch antenna with improved Return Loss, VSWR, Bandwidth and Radiation Pattern.

scholarly journals A Compact Size 4–19.1 GHz Heart Shape UWB Antenna with Triangular Patches

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Gokmen Isik ◽  
Serkan Topaloglu
Keyword(s):  
Radiation Pattern ◽  
Input Impedance ◽  
Patch Antennas ◽  
Frequency Range ◽  
Uwb Antenna ◽  
Radiation Characteristics ◽  
Narrow Bandwidth ◽  
Compact Size ◽  
Uwb Applications

An ultrawideband antenna is designed, simulated, and realized. To overcome the narrow bandwidth characteristics of basic patch antennas, the structure of the radiation pattern is optimized by the aid of elliptical and rectangular patches. Also triangular patches are applied to the antenna edge in order to enhance the VSWR and gain properties. A typical VSWR of 1.5 (less than 2 in the whole frequency range) and a typical gain of 2 dBi (mainly above 1 dBi in the whole frequency range) are observed. The simulations present that the designed antenna has a bandwidth ratio of ~5 : 1 within the frequency range of 4–19.1 GHz with compact dimensions of 25 × 26 mm2. It is fabricated on a 0.5 mm thick, RO3035 substrate. The input impedance, gain, and radiation characteristics of the antenna are also presented. With these properties, it is verified that, with its novel shape, the proposed antenna can be used for various UWB applications.

A new compact and miniaturized multiband uniplanar CPW-fed Monopole antenna with T-slot inverted for multiple wireless applications

2017 ◽  
Vol 9 (7) ◽  
pp. 1541-1545 ◽  
Author(s):  
Rachid Dakir ◽  
Jamal Zbitou ◽  
Ahmed Mouhsen ◽  
Abdelwahed Tribak ◽  
Angel Mediavilla Sanchez ◽  
...  
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Configuration Design ◽  
Rectangular Slot ◽  
Wireless Applications ◽  
Compact Size ◽  
Feeding Technique ◽  
Wireless Application ◽  
Antenna Configuration

In this paper, the design of a new compact uniplanar coplanar waveguide-fed antenna for multiband wireless application is presented and investigated. This antenna has a compact size of 25 × 25 mm2 and consists of a three parallel stub optimized added on rectangular slot to the radiator patch and T-shaped which inverted in the ground plane. The final prototype antenna designing resonantes at frequency bands (2.4–2.9 GHz), (3.7–5.2 GHz), and (5.7–6 GHz) with a return loss less than −10 dB. Details of the antenna configuration, design, simulation, and experimental results are presented, investigated, and discussed. The compactness, simple feeding technique, and conception of the uniplanar design make it easy to be integrated within devices of multiples wireless applications.

scholarly journals A Compact ACS-Fed Tri-band Microstrip Monopole Antenna for WLAN/WiMAX Applications

2018 ◽  
Vol 7 (5) ◽  
pp. 87-93 ◽  
Author(s):  
D. Kahina ◽  
C. Mouloud ◽  
D. Mokrane ◽  
M. Faiza ◽  
A. Rabia
Keyword(s):  
Radiation Pattern ◽  
Return Loss ◽  
Simple Structure ◽  
Ground Plane ◽  
Monopole Antenna ◽  
Radiation Patterns ◽  
Total Size ◽  
Resonant Frequencies ◽  
Compact Size ◽  
Microstrip Monopole Antenna

This paper proposes a novel small asymmetric coplanar strip (ACS) fed tri-band monopole antenna for WLAN and WiMAX applications. To tune and create multiple resonant frequencies, the exciting strip of monopole antenna is connected to two different arms which are a J-shaped directed toward the asymmetric ground plane and an open stub. The proposed monopole antenna with a total size of 14.6 x17.5 mm2 is fabricated and tested. The measured results indicate that the antenna has impedance bandwidths for 10-dB return loss reach about 500 MHz (2.01-2.52 GHz), 230 MHz (3.48-3.71 GHz) and 1.2GHz (5.59-6.72 GHz) which cover widely the 2.4/5.8 GHz WLAN bands and the 3.5GHz WiMAX band. The simulated radiation patterns of the proposed antenna at the three resonant frequencies have a dipole-like radiation pattern in both E-and H-Planes. The compact size, the simple structure and good radiation performances of the proposed antenna makes it well-suited forthe intended applications.

scholarly journals A CPW-fed Irregular Shaped Hexagonal Patch Antenna with Elliptical Substrate for UWB Applications

2019 ◽  
Vol 9 (2) ◽  
pp. 373-376
Keyword(s):  
Patch Antenna ◽  
Impedance Matching ◽  
Ultra Wideband ◽  
Total Efficiency ◽  
Uwb Antenna ◽  
Radiation Characteristics ◽  
Wide Range ◽  
Uwb Applications ◽  
Novel Design ◽  
Peak Gain

A novel design of Ultra-Wideband (UWB) antenna with irregularly shaped hexagonal patch built on the elliptical-shaped FR-4 laminate with εr = 4.3 and tanδ = 0.025 is presented. The feed mechanism utilized in the structure proposed is modified co-planar waveguide (CPW), the feeding microstrip is tapered near the connecting edge of the patch for better impedance matching. The proposed antenna is compared with the traditional rectangular substrate and found that the elliptical substrate enhances the radiation characteristics of the antenna and is capable of functioning effectively in the range of 3.1 GHz-11.7 GHz, accompanied by the total efficiency > 86% across the whole FCC allocated UWB operating band. The antenna can be used for wide range of UWB applications as it exhibits good omnidirectional characteristics with a realized peak gain of 4.178dB and an average realized gain of 3.063dB. The simulation work of the antenna is accomplished using CST Studio (v. 2014).

Sign in / Sign up

Export Citation Format

Share Document