scholarly journals Chloride Ion Catalysed Rearrangement, and Isotope Exchange of the Isomeric Methylallyl Chlorides in Acetonitrile

2021 ◽  
Author(s):  
◽  
Jacqueline Ann Hemmingson

<p><b>The bromide ion catalysed rearrangement reaction of ⍺-methylallyl bromide in acetone was studied by England and Hughes and assigned an S[n]2' mechanism, and this was the only isomeric rearrangement reaction proceeding by this mechanism which had been thoroughly investigated. 79,120 The kinetics and mechanism of the chloride ion catalysed isomeric rearrangement reactions of ⍺-and ɣ-methylallyl chloride in acetonitrile have now been investigated and an S[n]2' mechanism has been assigned to these reactions, various other possible mechanisms having been excluded. The kinetics and mechanics of the isotope exchange reactions of the two isomers in acetonitrile have also bean studied and these reactions have been assigned en S[n]2 mechanism. The isotope exchange reactions of both the methylallyl bromides and the methylallyl chlorides in acetone were studied by England and Hughes, the reaction medium being unfavourable for a study of the S[n]2' reactions of the latter substrates. A comparison of the kinetic data for the rearrangement end Isotope exchange reactions of the methylallyl chlorides in acetonitrile with that for the corresponding reactions of the methylallyl bromides in acetone la made. The two systems are similar in behaviour as may be seen from the data tabulated below.</b></p> <p>Substrate Mechanism K2 (25° C) Δ H°Δ S° (M⁻¹ sec.⁻¹) (kcal.mole⁻¹) (cal.deg.⁻¹ mole⁻¹)⍺-methylallyl chloride S[n]2 2.87X10⁻⁶ 20.8-13.9⍺-methylallyl chloride S[n]2'1.33X10⁻⁸ 24.2-13.4ɣ-methylallyl chlorideS[n]2 3.15X10⁻⁴ 18.8-11.6ɣ-methylallyl chloride S[n]2' 5.31X10⁻⁹ 24.3-14.9⍺-methylallyl bromide S[n]2 8.79X10⁻⁴ 15.9-19.1⍺-methylallyl bromide S[n]2' 1.49X10⁻⁵ 18.8-17.7ɣ-methylallyl bromide S[n]2 1.41X10⁻¹ 14.1-15.0⍺-methylallyl chloride S[n]2 2.30X10⁻⁷ 19.9-22.1ɣ-methylallyl chloride S[n]2 2.88X10⁻⁵ 15.8-26.2A comparison of the kinetic data for the isotope exchange reactions of the methylallyl chlorides in acetonitrile and acetone is also made. England and Hughes' data for the latter solvent is shown above. Relative rates of nucleophilic attack at saturated carbon, π-bonded carbon and hydrogen are discussed for these substrates, a minor concurrent elimination reaction accompanying the S[n]2' reaction of ⍺-methylallyl chloride in acetonitrile providing information on the latter. The nucleophilic reactivity of the halide ions is much greater for attack at a saturated carbon atom than for attack at a π-bonded carton atom, while toward hydrogen these ions are very weak nucleophiles as shown by the rate ratios given below for the chloride ion catalysed reactions of ⍺-methylallyl chloride in acetonitrile.</p> <p>[see thesis pdf for formula]In the absence of chloride ions a slow surface-catalysed elimination reaction takes place which promotes hydrogen chloride catalysed rearrangement. The addition of 0.05M Et4 NCl prevents the latter reaction from occurring and gives a rata ratio of 5.5 for the chloride ion catalysed and surface-catalysed elimination reactions. By comparison with other dipolar aprotic solvents, acetonitrile appears to be particularly suitable for slow reactions requiring prolonged reaction times at elevated temperatures. Acetone, as mentioned above, and both dimethyl sulphoxide and dimethylformamide were found to be unsuitable for S[n]2' studies, the latter two being: Investigated during the search for a suitable solvent in which to study the reactions of the methylallyl chlorides.</p>

2021 ◽  
Author(s):  
◽  
Jacqueline Ann Hemmingson

<p><b>The bromide ion catalysed rearrangement reaction of ⍺-methylallyl bromide in acetone was studied by England and Hughes and assigned an S[n]2' mechanism, and this was the only isomeric rearrangement reaction proceeding by this mechanism which had been thoroughly investigated. 79,120 The kinetics and mechanism of the chloride ion catalysed isomeric rearrangement reactions of ⍺-and ɣ-methylallyl chloride in acetonitrile have now been investigated and an S[n]2' mechanism has been assigned to these reactions, various other possible mechanisms having been excluded. The kinetics and mechanics of the isotope exchange reactions of the two isomers in acetonitrile have also bean studied and these reactions have been assigned en S[n]2 mechanism. The isotope exchange reactions of both the methylallyl bromides and the methylallyl chlorides in acetone were studied by England and Hughes, the reaction medium being unfavourable for a study of the S[n]2' reactions of the latter substrates. A comparison of the kinetic data for the rearrangement end Isotope exchange reactions of the methylallyl chlorides in acetonitrile with that for the corresponding reactions of the methylallyl bromides in acetone la made. The two systems are similar in behaviour as may be seen from the data tabulated below.</b></p> <p>Substrate Mechanism K2 (25° C) Δ H°Δ S° (M⁻¹ sec.⁻¹) (kcal.mole⁻¹) (cal.deg.⁻¹ mole⁻¹)⍺-methylallyl chloride S[n]2 2.87X10⁻⁶ 20.8-13.9⍺-methylallyl chloride S[n]2'1.33X10⁻⁸ 24.2-13.4ɣ-methylallyl chlorideS[n]2 3.15X10⁻⁴ 18.8-11.6ɣ-methylallyl chloride S[n]2' 5.31X10⁻⁹ 24.3-14.9⍺-methylallyl bromide S[n]2 8.79X10⁻⁴ 15.9-19.1⍺-methylallyl bromide S[n]2' 1.49X10⁻⁵ 18.8-17.7ɣ-methylallyl bromide S[n]2 1.41X10⁻¹ 14.1-15.0⍺-methylallyl chloride S[n]2 2.30X10⁻⁷ 19.9-22.1ɣ-methylallyl chloride S[n]2 2.88X10⁻⁵ 15.8-26.2A comparison of the kinetic data for the isotope exchange reactions of the methylallyl chlorides in acetonitrile and acetone is also made. England and Hughes' data for the latter solvent is shown above. Relative rates of nucleophilic attack at saturated carbon, π-bonded carbon and hydrogen are discussed for these substrates, a minor concurrent elimination reaction accompanying the S[n]2' reaction of ⍺-methylallyl chloride in acetonitrile providing information on the latter. The nucleophilic reactivity of the halide ions is much greater for attack at a saturated carbon atom than for attack at a π-bonded carton atom, while toward hydrogen these ions are very weak nucleophiles as shown by the rate ratios given below for the chloride ion catalysed reactions of ⍺-methylallyl chloride in acetonitrile.</p> <p>[see thesis pdf for formula]In the absence of chloride ions a slow surface-catalysed elimination reaction takes place which promotes hydrogen chloride catalysed rearrangement. The addition of 0.05M Et4 NCl prevents the latter reaction from occurring and gives a rata ratio of 5.5 for the chloride ion catalysed and surface-catalysed elimination reactions. By comparison with other dipolar aprotic solvents, acetonitrile appears to be particularly suitable for slow reactions requiring prolonged reaction times at elevated temperatures. Acetone, as mentioned above, and both dimethyl sulphoxide and dimethylformamide were found to be unsuitable for S[n]2' studies, the latter two being: Investigated during the search for a suitable solvent in which to study the reactions of the methylallyl chlorides.</p>


1989 ◽  
Vol 93 (3) ◽  
pp. 1130-1134 ◽  
Author(s):  
Jane M. Van Doren ◽  
Charles H. DePuy ◽  
Veronica M. Bierbaum

1995 ◽  
Vol 60 (7) ◽  
pp. 1140-1157 ◽  
Author(s):  
Ljiljana S. Jovanovic ◽  
Luka J. Bjelica

The electrochemistry of four novel Fe(III) complexes of the type [Fe(L)Cl], involving quadridentate ligands based on the condensation products of benzoylacetone-S-methylisothiosemicarbazone with salicylaldehyde, 5-chlorosalicylaldehyde, 3,5-dichlorosalicylaldehyde or 5-nitrosalicylaldehyde, was studied in DMF and DMSO at a GC electrode. All complexes undergo a two-step one-electron reductions, usually complicated by chemical reactions. In solutions containing Cl-, the ligand-exchange reactions Cl--DMF and Cl--DMSO take place. Stability of the chloride-containing complexes was discussed in terms of the coordinated ligand effect, oxidation state of the central atom and, in particular, of the donor effect of the solvent. Some relevant kinetic data were calculated.


2021 ◽  
Vol 11 (12) ◽  
pp. 5322
Author(s):  
Yang Ding ◽  
Tong-Lin Yang ◽  
Hui Liu ◽  
Zhen Han ◽  
Shuang-Xi Zhou ◽  
...  

Cement is widely used in marine concrete, and its resistance to chloride ion corrosion has been widely considered. In this paper, based on a laboratory test, the influence of different hydrostatic pressures, coarse aggregate contents and w/c ratios on the chloride resistance performance is analyzed. Based on COMSOL finite element software, a two-dimensional cementitious materials model is established, and the simulation results are compared with the experimental results. The results show that the penetration depth of chloride ions in cement increases with the increase of the w/c ratio. Under the hydrostatic pressure of 0 MPa, when the w/c ratio is 0.35, the penetration depth of chloride ions is 7.4 mm, and the simulation result is 8.0 mm. When the w/c ratio is 0.45, the penetration depth of chloride ions is 9.3 mm, and the simulation result is 9.9 mm. When the w/c ratio is 0.55, the penetration depth of chloride ions is 12.9 mm, and the simulation result is 12.1 mm. Under different hydrostatic pressures, the penetration depth of chloride ions obviously changes, and with the increase in hydrostatic pressure, the penetration depth of chloride ions deepens. Under the w/c ratio of 0.35, when the hydrostatic pressure is 0.5 MPa, the penetration depth of chloride ions is 11.3 mm, and the simulation result is 12.1 mm. When the hydrostatic pressure is 1.0 MPa, the penetration depth of chloride ions is 16.2 mm, and the simulation result is 17.5 mm.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Adrian Radoń ◽  
Dariusz Łukowiec ◽  
Patryk Włodarczyk

AbstractThe dielectric properties and electrical conduction mechanism of bismuth oxychloride (BiOCl) plates synthesized using chloramine-T as the chloride ion source were investigated. Thermally-activated structure rebuilding was monitored using broadband dielectric spectroscopy, which showed that the onset temperature of this process was 283 K. This rebuilding was related to the introduction of free chloride ions into [Bi2O2]2+ layers and their growth, which increased the intensity of the (101) diffraction peak. The electrical conductivity and dielectric permittivity were related to the movement of chloride ions between plates (in the low-frequency region), the interplanar motion of Cl− ions at higher frequencies, vibrations of these ions, and charge carrier hopping at frequencies above 10 kHz. The influence of the free chloride ion concentration on the electrical conductivity was also described. Structure rebuilding was associated with a lower concentration of free chloride ions, which significantly decreased the conductivity. According to the analysis, the BiOCl plate conductivity was related to the movement of Cl− ions, not electrons.


Author(s):  
Daria S. Timofeeva ◽  
David M Lindsay ◽  
W. J. Kerr ◽  
David James Nelson

Herein we examine the relationship between reaction rate and reaction selectivity in iridium-catalysed hydrogen isotope exchange (HIE) reactions directed by Lewis basic functional groups. We have recently develped a directing...


2006 ◽  
Vol 353 (3) ◽  
pp. 193-201 ◽  
Author(s):  
Teboh F. Roland ◽  
Jacek Borysow ◽  
Manfred Fink

Sign in / Sign up

Export Citation Format

Share Document