scholarly journals IMPLEMENTATION OF A SPECTROPHOTOMETER TEACHING AND LOW COST: APPLICATION IN PHYSICS AND CHEMISTRY LABORATORIES FAFISM

2014 ◽  
Vol 39 (1) ◽  
pp. 131
Author(s):  
Kátia Isabel Milagres ◽  
Camila Rodrigues Amaral ◽  
Érica M. da Silva Santos ◽  
Tarcísio B. Marques ◽  
Guilherme De O. Gomes
Keyword(s):  
Visual Field ◽  
School Improvement ◽  
Chemical Analysis ◽  
Low Cost ◽  
Operating Cost ◽  
Practical Solution ◽  
Quantitative Technique ◽  
Physical Chemical ◽  
The Cost ◽  
Analytical Laboratories

The photometry in the visual field has wide application in analytical laboratories and research physical, chemical, biochemical, pharmacological, etc. It is essential that students of physics and chemistry have knowledge about this quantitative technique. One obstacle to the widespread use of this technique is the cost of equipment and materials to be used. The objective of this work is the introduction of a photometer didactic, whose construction and technique with a low operating cost and the easy using and producing results, as a practical solution to put school improvement. The features highlighted in the work do the proposed photometer an economically viable alternative tool for chemical analysis in the laboratories of the Faculty for research and / or teaching.

scholarly journals The Costs of Producing Biodiesel from Microalgae in the Asia-Pacific Region

2013 ◽  
Vol 2 (3) ◽  
pp. 105-113 ◽  
Author(s):  
G.J. Griffin ◽  
D.F. Batten ◽  
T. Beer ◽  
P.K. Campbell
Keyword(s):  
Low Cost ◽  
Operating Cost ◽  
Asia Pacific ◽  
Pacific Region ◽  
Asia Pacific Region ◽  
Cost Estimates ◽  
The World ◽  
Resource Availability Cost ◽  
The Cost ◽  
High Degree

Capital and operating cost estimates for converting microalgae to oil or biodiesel are compared. These cost comparisons are based on Australian locations, which are expected to fall at the lower end of the cost spectrum in the Asia-Pacific Region and other parts of the world.  It is assumed that microalgae are grown in a concentrated saltwater medium in raceway ponds, then are harvested, dewatered and the oil is extracted and converted to biodiesel by transesterification. The size of the desired pond system affects the number of potential locations due to constraints in resource availability. Cost estimates vary significantly due to differences in the assumed oil productivity, the harvesting equipment and the method of converting residual biomass to electric power. A comparison is made with recent cost estimates from other parts of the world, in which the expected costs of microalgae oil production from a number of publicly available sources lay between 0.34–31.0 USD/L.  The resulting cost estimates of between 1.37—2.66 USD/L are at the lower end of this scale, thereby confirming that Australia has the potential to be a low-cost producer of algal oil and biodiesel in the Asia-Pacific Region.  It was significant that, despite similar assumptions for the microalgae-to-oil process, cost estimates for the final biodiesel or oil price differed by a factor of 2.  This highlights the high degree of uncertainty in such economic predictions. Keywords: Asia-Pacific region; biodiesel; economics; microalgaeThis article is cited as :Griffin, G., Batten, D., Beer, T., & Campbell, P. (2013). The Costs of Producing Biodiesel from Microalgae in the Asia-Pacific Region. International Journal Of Renewable Energy Development (IJRED), 2(3), 105-113. doi:10.14710/ijred.2.3.105-113Permalinkhttp://dx.doi.org/10.14710/ijred.2.3.105-113

Development of a low-cost ice crusher for raw fish storage

2021 ◽  
Vol 11 (01) ◽  
pp. 727-735
Author(s):  
M. A. Rabbani ◽  
◽  
K. Tamanna ◽  
A. K. Ahmed ◽  
S. M. Rifat ◽  
...  
Keyword(s):  
Low Cost ◽  
Operating Cost ◽  
Throughput Capacity ◽  
Machine Construction ◽  
Local Market ◽  
Heavy Load ◽  
Post Harvest ◽  
Machine Performance ◽  
The Cost ◽  
Post Harvest Loss

The fisheries sector in Bangladesh undergoes various post-harvest problems: the high post-harvest loss of fish. As fish is highly perishable, it needs proper handling, processing, and distribution in time. Ice is the major and primary material that is used in Bangladesh for fish preservation. Different methods are used for crushing ice. In the traditional method, ice is crushed with a heavy load by hand. This method is very laborious and most often does not provide a uniform shape. So, an attempt was taken to develop a low-cost ice crusher machine in the Department of Farm Power and Machinery, Bangladesh Agricultural University, Mymensingh. Based on the design and drawing, the machine was manufactured. Necessary materials to construct the machine were collected from the local market. The machine throughput capacity of the developed ice crusher was found 854.85 kg/hr. with an overall loss of 10.5%. Based on the test parameters, the machine performance was found satisfactory. The machine construction cost was estimated as Tk 11048. The operating cost for ice crushing was calculated, and it was found to be Tk 0.07/kg. This machine was simple at construction and the cost is also low, which indicates that the machine is suitable input for ice crushing to the marginal user. Where electricity is not available and large commercial heavy ice crushers are not available, this machine can be very suitable.

scholarly journals Cost Economies for an Airline: An Analysis of Airlines’ Operating Costs

2019 ◽  
Vol 12 (3) ◽  
pp. 1856-1859
Author(s):  
Harendra Nishantha Kariyawasam
Keyword(s):  
Economies Of Scale ◽  
Low Cost ◽  
Operating Cost ◽  
Operating Costs ◽  
Asia Pacific ◽  
Profit Margins ◽  
Cost Structures ◽  
Low Cost Carriers ◽  
Average Operating ◽  
The Cost

This study focuses on analyzing the variables affecting the average operating cost per aircraft movement. Since airlines around the world are operated on thin profit margins and with increasing competition from Low Cost Carriers it will be important for an airline to get a complete understanding about their operating cost structure. The aim of this study is to suggest an airline of actions to reduce their operating cost and will differentiate the cost structures of Low Cost Carriers and Full Service Carriers. This study was conducted for 20 airlines which were operating in Asia Pacific region. Published financial and statistical data were used for analysis and a parametric approach was used. The results of this study do not suggest economies of scale for the airline, which is to have higher number of aircraft to reduce cost.

scholarly journals Construction and Test of Low Cost X-Ray Tomography Scanner for Physical-Chemical Analysis and Nondestructive Inspections

2009 ◽  
Author(s):  
José Martins de Oliveira ◽  
Antonio César Germano Martins ◽  
Valdir Guimaraes ◽  
José R. B. Oliveira ◽  
Kita C. D. Macario ◽  
...  
Keyword(s):  
Chemical Analysis ◽  
Low Cost ◽  
X Ray ◽  
Physical Chemical

Advance Protection for Three Phase Induction Motor using Microcontroller Atmega32

2018 ◽  
Vol 8 (1) ◽  
pp. 172
Author(s):  
Karan S Belsare ◽  
Gajanan D Patil
Keyword(s):  
Induction Motor ◽  
Low Cost ◽  
Short Circuit ◽  
Cost Factor ◽  
Protection Scheme ◽  
Three Phase ◽  
The Cost

A low cost and reliable protection scheme has been designed for a three phase induction motor against unbalance voltages, under voltage, over voltage, short circuit and overheating protection. Taking the cost factor into consideration the design has been proposed using microcontroller Atmega32, MOSFETs, relays, small CTs and PTs. However the sensitivity of the protection scheme has been not compromised. The design has been tested online in the laboratory for small motors and the same can be implemented for larger motors by replacing the i-v converters and relays of suitable ratings.

Janus – A New Approach to Air Combat Pilot Training

2019 ◽  
Vol 2019 (4) ◽  
pp. 7-22
Author(s):  
Georges Bridel ◽  
Zdobyslaw Goraj ◽  
Lukasz Kiszkowiak ◽  
Jean-Georges Brévot ◽  
Jean-Pierre Devaux ◽  
...  
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Energy ◽  
Training System ◽  
Embedded Sensors ◽  
Pilot Training ◽  
New Approach ◽  
Combat Aircraft ◽  
Air Combat ◽  
The Cost

Abstract Advanced jet training still relies on old concepts and solutions that are no longer efficient when considering the current and forthcoming changes in air combat. The cost of those old solutions to develop and maintain combat pilot skills are important, adding even more constraints to the training limitations. The requirement of having a trainer aircraft able to perform also light combat aircraft operational mission is adding unnecessary complexity and cost without any real operational advantages to air combat mission training. Thanks to emerging technologies, the JANUS project will study the feasibility of a brand-new concept of agile manoeuvrable training aircraft and an integrated training system, able to provide a live, virtual and constructive environment. The JANUS concept is based on a lightweight, low-cost, high energy aircraft associated to a ground based Integrated Training System providing simulated and emulated signals, simulated and real opponents, combined with real-time feedback on pilot’s physiological characteristics: traditionally embedded sensors are replaced with emulated signals, simulated opponents are proposed to the pilot, enabling out of sight engagement. JANUS is also providing new cost effective and more realistic solutions for “Red air aircraft” missions, organised in so-called “Aggressor Squadrons”.

ALGOMA AR225

Alloy Digest ◽  
2003 ◽  
Vol 52 (12) ◽  
Keyword(s):  
Carbon Steel ◽  
Chemical Analysis ◽  
Physical Properties ◽  
Carbon Content ◽  
Brinell Hardness ◽  
Low Cost ◽  
Heat Treating ◽  
Rolled Plate ◽  
High Carbon ◽  
High Carbon Content

Abstract Algoma AR225 is a carbon steel developed primarily to supply a low-cost material for high-abrasion applications. It is furnished in the form of as-rolled plate with a relatively high carbon content (0.35-0.45%). AR-225 is sold on the basis of chemical analysis only; the number 225 signifies the approximate Brinell hardness. On thicknesses one-half inch and over, this Brinell value may be lower than 225 because of higher finishing temperatures. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-138. Producer or source: Algoma Steel Corporation Ltd.

scholarly journals A low-cost wireless endoscope camera: a preliminary report

2021 ◽  
Vol 27 (1) ◽  
Author(s):  
J. M. Lazarus ◽  
M. Ncube
Keyword(s):  
Minimally Invasive Surgery ◽  
Minimally Invasive ◽  
Video Transmission ◽  
Low Cost ◽  
Battery Life ◽  
Resource Constrained ◽  
High Definition ◽  
Industry Standard ◽  
Constrained Environments ◽  
The Cost

Abstract Background Technology currently used for surgical endoscopy was developed and is manufactured in high-income economies. The cost of this equipment makes technology transfer to resource constrained environments difficult. We aimed to design an affordable wireless endoscope to aid visualisation during rigid endoscopy and minimally invasive surgery (MIS). The initial prototype aimed to replicate a 4-mm lens used in rigid cystoscopy. Methods Focus was placed on using open-source resources to develop the wireless endoscope to significantly lower the cost and make the device accessible for resource-constrained settings. An off the shelf miniature single-board computer module was used because of its low cost (US$10) and its ability to handle high-definition (720p) video. Open-source Linux software made monitor mode (“hotspot”) wireless video transmission possible. A 1280 × 720 pixel high-definition tube camera was used to generate the video signal. Video is transmitted to a standard laptop computer for display. Bench testing included latency of wireless digital video transmission. Comparison to industry standard wired cameras was made including weight and cost. The battery life was also assessed. Results In comparison with industry standard cystoscope lens, wired camera, video processing unit and light source, the prototype costs substantially less. (US$ 230 vs 28 000). The prototype is light weight (184 g), has no cables tethering and has acceptable battery life (of over 2 h, using a 1200 mAh battery). The camera transmits video wirelessly in near real time with only imperceptible latency of < 200 ms. Image quality is high definition at 30 frames per second. Colour rendering is good, and white balancing is possible. Limitations include the lack of a zoom. Conclusion The novel wireless endoscope camera described here offers equivalent high-definition video at a markedly reduced cost to contemporary industry wired units and could contribute to making minimally invasive surgery possible in resource-constrained environments.

scholarly journals Multi-Blockchain-Based IoT Data Processing Techniques to Ensure the Integrity of IoT Data in AIoT Edge Computing Environments

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3515
Author(s):  
Sung-Ho Sim ◽  
Yoon-Su Jeong
Keyword(s):  
Low Cost ◽  
Third Party ◽  
Monitoring And Control ◽  
Constant Size ◽  
Computing Environments ◽  
Iot Devices ◽  
Cloud Servers ◽  
The Cost ◽  
Processing Techniques ◽  
And Control

As the development of IoT technologies has progressed rapidly recently, most IoT data are focused on monitoring and control to process IoT data, but the cost of collecting and linking various IoT data increases, requiring the ability to proactively integrate and analyze collected IoT data so that cloud servers (data centers) can process smartly. In this paper, we propose a blockchain-based IoT big data integrity verification technique to ensure the safety of the Third Party Auditor (TPA), which has a role in auditing the integrity of AIoT data. The proposed technique aims to minimize IoT information loss by multiple blockchain groupings of information and signature keys from IoT devices. The proposed technique allows IoT information to be effectively guaranteed the integrity of AIoT data by linking hash values designated as arbitrary, constant-size blocks with previous blocks in hierarchical chains. The proposed technique performs synchronization using location information between the central server and IoT devices to manage the cost of the integrity of IoT information at low cost. In order to easily control a large number of locations of IoT devices, we perform cross-distributed and blockchain linkage processing under constant rules to improve the load and throughput generated by IoT devices.

scholarly journals Design and Adoption of Low-Cost Point-of-Care Diagnostic Devices: Syrian Case

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 882
Author(s):  
M. Munzer Alseed ◽  
Hamzah Syed ◽  
Mehmet Cengiz Onbasli ◽  
Ali K. Yetisen ◽  
Savas Tasoglu
Keyword(s):  
Civil Wars ◽  
Healthcare Workers ◽  
New Technologies ◽  
Point Of Care ◽  
Low Cost ◽  
Healthcare Services ◽  
Efficient Solutions ◽  
Humanitarian Crises ◽  
Technology Experience ◽  
The Cost

Civil wars produce immense humanitarian crises, causing millions of individuals to seek refuge in other countries. The rate of disease prevalence has inclined among the refugees, increasing the cost of healthcare. Complex medical conditions and high numbers of patients at healthcare centers overwhelm the healthcare system and delay diagnosis and treatment. Point-of-care (PoC) testing can provide efficient solutions to high equipment cost, late diagnosis, and low accessibility of healthcare services. However, the development of PoC devices in developing countries is challenged by several barriers. Such PoC devices may not be adopted due to prejudices about new technologies and the need for special training to use some of these devices. Here, we investigated the concerns of end users regarding PoC devices by surveying healthcare workers and doctors. The tendency to adopt PoC device changes is based on demographic factors such as work sector, education, and technology experience. The most apparent concern about PoC devices was issues regarding low accuracy, according to the surveyed clinicians.

Sign in / Sign up

Export Citation Format

Share Document