scholarly journals Device for automatic determination of inclination angles of means of mechani-zation of technological processes in agro-industrial complex

2021 ◽  
pp. 103-106
Author(s):  
Roman Vladimirovich Shkrabak
Keyword(s):  
Economic Effect ◽  
Industrial Processes ◽  
Industrial Complex ◽  
Loss Of Stability ◽  
Mountainous Areas ◽  
Automatic Determination ◽  
Industrial Enterprises ◽  
Inclination Angles ◽  
Maximum Inclination

The article describes the problem associated with the loss of stability of means of mechanization of agro-industrial processes by machine-tractor units (transport, stealing, automobile and automobile trains, combines, and lifting cranes). It is noted that this circumstance leads to overturns, accidents, injuries, fires, often accompanied by fatalities. In support of the above, information is summarized on the number of injuries among women and men in the country's agro-industrial enterprises (including lethal ones). It is noted that this is due to the fact that these units are not equipped with devices that signal, automatically notify operators operating in conditions of irregularities in the terrain of fields and roads (mountainous areas) about the achievements of maximum inclination angles, the excess of which leads to overturns. In order to eliminate these situations, a device is justified and based on extensive research, automatically signalling and visually and soundly about reaching the limit angles (for a given machine) of stability in order to take measures by the operator to prevent overturning. Equipping these machines with the proposed innovative device will eliminate the possibility of overturns and related accidents, injuries, fires, providing a socio-economic effect.

On Automatic Determination of Movement Phases in Manual Transport During the Precision Grip

2000 ◽  
Vol 28 (1-2) ◽  
pp. 237-245 ◽  
Author(s):  
Nasser Hosseini ◽  
Blanka Hejdukova ◽  
Pall E. Ingvarsson ◽  
Bo Johnels ◽  
Torsten Olsson
Keyword(s):  
Precision Grip ◽  
Automatic Determination

Corporate culture as a driver of the corporate security of foreign military-industrial enterprises

2020 ◽  
Vol 16 (12) ◽  
pp. 2363-2380
Author(s):  
S.B. Zainullin ◽  
O.A. Zainullina
Keyword(s):  
Corporate Culture ◽  
Economic Security ◽  
The State ◽  
Industrial Complex ◽  
The European Union ◽  
Corporate Security ◽  
Industrial Enterprises ◽  
The Core ◽  
The Usa ◽  
The Military

Subject. The military-industrial complex is one of the core industries in any economy. It ensures both the economic and global security of the State. However, the economic security of MIC enterprises strongly depends on the State and other stakeholders. Objectives. We examine key factors of corporate culture in terms of theoretical and practical aspects. The article identifies the best implementation of corporate culture that has a positive effect on the corporate security in the MIC of the USA, the United Kingdom, the European Union, Japan ans China. Methods. The study employs dialectical method of research, combines the historical and logic unity, structural analysis, traditional techniques of economic analysis and synthesis. Results. We performed the comparative analysis of corporate culture models and examined how they are used by the MIC corporations with respect to international distinctions. Conclusions and Relevance. The State is the main stakeholder of the MIC corporations, since it acts as the core customer represented by the military department. It regulates and controls operations. The State is often a major shareholder of such corporations. Employees are also important stakeholders. Hence, trying to satisfy stakeholders' needs by developing the corporate culture, corporations mitigate their key risks and enhance their corporate security.

The technological transformation of Russia's industrial sectors: Difficulties and prospects

2020 ◽  
Vol 16 (9) ◽  
pp. 1674-1697
Author(s):  
O.P. Smirnova ◽  
A.O. Ponomareva
Keyword(s):  
Production Method ◽  
Industrial Sector ◽  
The State ◽  
Industrial Complex ◽  
Economic Activities ◽  
Resource Saving ◽  
Technological Transformation ◽  
Modern Approach ◽  
Industrial Enterprises ◽  
Industrial Sectors

Subject. The article focuses on contemporary trends in the industrial and socio-economic development of Russia during the technological transformation of its sectors. Objectives. The study is an attempt to analyze what opportunities and difficulties may arise for the development of the industrial sectors in Russia. We also examine the dynamics of key development indicators of the industrial sectors, point out inhibitors of their competitiveness. Methods. The methodological framework comprises general methods of systems, structural-functional and comprehensive approaches to analyzing economic phenomena. We applied graphic, economic-statistical methods of research, conventional methods of grouping, comparison and generalization, and the logic, systems and statistical analysis. Results. We display how industrial sectors develop over time by type of economic activities. The article provides the rationale for structural rearrangements and further innovation-driven development of the industries. We display that the Russian industries technologically depend om imported production technologies. We substantiate the renewal of assets and technologies at industrial enterprises, and retain and develop human capital. Conclusions and Relevance. Primarily, the Russian economy should be digitalized as a source of the long-term economic growth. Notably, industrial enterprises should replace their linear production method with that of the circular economy and implement resource-saving innovative technologies. The State evidently acts as the leading driver of technological retrofitting of the industrial sector. If the State holds the reasonable and appropriate industrial policy at the federal and regional levels and configure its tools to ensure the modern approach to developing the industries in a competitive fashion, the industrial complex will successfully transform into the innovative economy.

Methodical and organizational aspects in designing sanitary protection zones for a group of enterprises or industrial centers as a toll for complex atmospheric air quality assessment

2019 ◽  
pp. 940-944
Author(s):  
S. Yu. Zagorodnov ◽  
I. V. May
Keyword(s):  
Air Quality ◽  
Industrial Complex ◽  
Design Work ◽  
Atmospheric Air ◽  
Protection Zones ◽  
Industrial Enterprises ◽  
Economic Entity ◽  
Outer Border ◽  
Zone Of Influence ◽  
Environmental Measures

Introduction. Sanitary legislation of the Russian Federation provides for the organization of sanitary protection zones of industrial enterprises located in the industrial hub. However, the justification procedure, establishing and monitoring boundaries of a single sanitary zones not fully resolved. This determines the practice of organization by economic entities of individual zones separating production from residential development. This situation complicates the adequate assessment of real pollution, as well as the reasonable development of programs (plans) of environmental measures. Identification of the sources that create poor air quality and public health risks is becoming extremely problematic.The aim of the study is to develop and test recommendations for the organization and methodological support of the design of a single sanitary protection zone of a group of enterprises in the current urban development.Materials and methods. The object of the study is an industrial hub formed by 5 industrial enterprises and located on the territory of a large urban settlement with a population of more than 450 thousand people. The city administration carried out a number of organizational measures that ensured the simultaneous inventory of emissions of enterprises and the design of the general sanitary zone of the industrial complex. The design work was carried out in full accordance with the current regulatory framework.Results. The verified unified database of 102 sources of chemical emissions and 113 sources of noise provided the possibility of summary calculations and obtaining the most correct results for surface concentrations in the zone of influence of the industrial hub. The program of quality control of atmospheric air defining the contribution of each economic subject to carrying out researches is formed. This made it possible to ensure the control of all priority contaminants at the outer border of the sanitary zone and reduce the costs of each separate economic entity. Zones of responsibility of each enterprise within borders of a uniform sanitary zone for tasks of maintenance of the standard maintenance of the territory are allocated.Conclusions. The obtained results confirmed the feasibility of designing unified sanitary protection zones for economic entities located in the industrial hub.

Automatic Determination of Optimal FIB Operations for Improved Circuit Probing and Fast Reconfiguration

2000 ◽  
Author(s):  
Romain Desplats ◽  
Timothee Dargnies ◽  
Jean-Christophe Courrege ◽  
Philippe Perdu ◽  
Jean-Louis Noullet
Keyword(s):  
Integrated Circuit ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Semiconductor Devices ◽  
Front Side ◽  
Automatic Determination ◽  
Metal Line ◽  
New Approach ◽  
Metal Layers

Abstract Focused Ion Beam (FIB) tools are widely used for Integrated Circuit (IC) debug and repair. With the increasing density of recent semiconductor devices, FIB operations are increasingly challenged, requiring access through 4 or more metal layers to reach a metal line of interest. In some cases, accessibility from the front side, through these metal layers, is so limited that backside FIB operations appear to be the most appropriate approach. The questions to be resolved before starting frontside or backside FIB operations on a device are: 1. Is it do-able, are the metal lines accessible? 2. What is the optimal positioning (e.g. accessing a metal 2 line is much faster and easier than digging down to a metal 6 line)? (for the backside) 3. What risk, time and cost are involved in FIB operations? In this paper, we will present a new approach, which allows the FIB user or designer to calculate the optimal FIB operation for debug and IC repair. It automatically selects the fastest and easiest milling and deposition FIB operations.

Automatic determination of heart rates from microscopy videos of early life stages of fish

2017 ◽  
Vol 80 (16-18) ◽  
pp. 932-940 ◽  
Author(s):  
Raymond Nepstad ◽  
Emlyn Davies ◽  
Dag Altin ◽  
Trond Nordtug ◽  
Bjørn Henrik Hansen
Keyword(s):  
Early Life ◽  
Life Stages ◽  
Early Life Stages ◽  
Automatic Determination ◽  
Heart Rates
Sign in / Sign up

Export Citation Format

Share Document