scholarly journals The Effect of Polyvinyl Alcohol Concentration on the Growth Kinetics of KTiOPO4 Nanoparticles Synthesized by the Co-precipitation Method

2020 ◽  
Vol 1 (4) ◽  
pp. 187-193
Author(s):  
Elaheh Gharibshahian
Keyword(s):  
Polyvinyl Alcohol ◽  
Shape Control ◽  
Second Harmonic ◽  
Precipitation Method ◽  
Capping Agent ◽  
X Ray Diffraction ◽  
X Ray ◽  
Size And Shape ◽  
Diffraction Patterns ◽  
Co Precipitation

KTiOPO4 nanoparticles are known as the best candidate to utilize for second-harmonic generation in multiphoton microscopes and bio labels. Size and shape are important and effective parameters to control the properties of nanoparticles. In this paper, we will investigate the role of capping agent concentration on the size and shape control of KTP nanoparticles. We synthesized KTP nanoparticles by the co-precipitation method. Polyvinyl alcohol with different mole ratios to titanium ion (1:3, 1:2, 1:1) was used as a capping agent. Products were examined by X-ray diffraction patterns and scanning electron microscopy analyses. X-ray diffraction patterns confirmed the formation of the KTP structure. The biggest (56.36nm) and smallest (39.42nm) grain size were obtained by 1:3 and 1:1 mole ratios of capping agent, respectively. Dumbly, spherical and polyhedral forms of KTP nanoparticles were observed by the change in capping agent mole ratio. The narrowest size distribution of KTiOPO4 nanoparticles was obtained at 1:1 mole ratio of capping agent. Doi: 10.28991/HIJ-2020-01-04-06 Full Text: PDF

The Mixed Magnetic Property of Co0.76Cu0.74[Fe(CN)6]·7.5H2O

2018 ◽  
Vol 71 (11) ◽  
pp. 914
Author(s):  
Yanfang Xia ◽  
Min Liu ◽  
Duxin Li
Keyword(s):  
Magnetic Field ◽  
Magnetic Moment ◽  
Effective Magnetic Moment ◽  
Lattice Parameter ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Diffraction Patterns ◽  
Co Precipitation ◽  
The Magnetic Field

Co0.76Cu0.74[Fe(CN)6]·7.5H2O was prepared as a powder by a chemical co-precipitation method. The powder X-ray diffraction patterns were indexed to the typical face-centred cubic structure with the lattice parameter a 10.55(2) Å. The temperature dependence of the χ−1 curve obeys the Curie–Weiss law (χ = C/(T – θ)) in the temperature range of 180–300 K. According to Curie–Weiss law, the calculated θ value is −54.82 K. In the paramagnetic state at 300 K, the effective magnetic moment (μeff = (8χT)1/2) is 3.58 μB per formula unit. The calculated theoretical effective magnetic moment is 4.06 μB. The magnetic field cooling measurements under a 200 Oe applied magnetic field show that the saturation magnetization value at 2 K of the complex Co0.76Cu0.74[Fe(CN)6]·7.5H2O is 1.528 emu g−1.

Decolorization of Methylene Blue by Photocatalyst in the Ag3PO4-AgI System

2014 ◽  
Vol 970 ◽  
pp. 29-32 ◽  
Author(s):  
Pongsaton Amornpitoksuk ◽  
Sumetha Suwanboon
Keyword(s):  
Methylene Blue ◽  
Mixed Phase ◽  
Photocatalytic Properties ◽  
Precipitation Method ◽  
Blue Dye ◽  
Methylene Blue Dye ◽  
X Ray Diffraction ◽  
X Ray ◽  
Diffraction Patterns ◽  
Co Precipitation

The co-effect of PO43- and I- on the formation of a heterosturucture photocatalyst in the Ag3PO4-AgI system was studied by the co-precipitation method between AgNO3 and the precipitating agent. The precipitating agent was prepared by varying the mole ratios between Na2HPO4 and KI. At 10 mol.% KI, the product showed the mixed phase between Ag3PO4 and un-identified phase. For 30 - 90 mol.% KI, the un-identified phase and AgI were detected in the x-ray diffraction patterns. The un-identified phase strongly adsorbed the methylene blue dye. The product prepared from 30 mol.% KI had the highest content of un-identified phase and also showed the highest degree of decolorization in the dark. The photocatalytic properties of products in this system were confirmed by the decolorization of methylene blue under visible illumination.

Influence of Temperature on the Order-Disorder Transition in Gd2Zr2O7

2016 ◽  
Vol 697 ◽  
pp. 386-389 ◽  
Author(s):  
Jing Lin Shi ◽  
Zhi Xue Qu ◽  
Qun Wang
Keyword(s):  
Fluorite Structure ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Inconsistent Result ◽  
Disorder Transition ◽  
X Ray ◽  
Influence Of Temperature On ◽  
Diffraction Patterns ◽  
Co Precipitation ◽  
Increasing Temperature

Chemical co-precipitation method was used to prepare Gd2Zr2O7 powders. The powders were then heated in air at 1500°C, 1510°C, 1525°C, 1530°C, 1550°C, 1575°C, 1600°C for 5 h, and 1575°C, 1600°C for 10 h, respectively. The samples after heat treatment were characterized by X-ray diffraction and Raman spectroscopy. X-ray diffraction patterns reveal that order-disorder transition of Gd2Zr2O7 occurs between 1550°C and 1575°C. Prior to the transition, the relative intensity of peaks corresponding to the super-lattice of pyrochlores increases with the increasing temperature. On the other hand, Raman spectra give an inconsistent result from the X-ray diffraction data. No appreciable difference can be observed for all the samples though with peaks broadening as temperature increases. The spectra of the samples indicated as fluorite structure in X-ray diffraction patterns appear with six resolvable peaks which is quite different from the spectrum of ideal fluorite structure.

scholarly journals Photoluminescent Properties of Hydroxyapatite and Hydroxyapatite/Multi-Walled Carbon Nanotube Composites

Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 832
Author(s):  
Edna X. Figueroa-Rosales ◽  
Javier Martínez-Juárez ◽  
Esmeralda García-Díaz ◽  
Daniel Hernández-Cruz ◽  
Sergio A. Sabinas-Hernández ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Hexagonal Phase ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Multi Walled Carbon Nanotube ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites ◽  
Co Precipitation ◽  
Functionalized Mwcnts

Hydroxyapatite (HAp) and hydroxyapatite/multi-walled carbon nanotube (MWCNT) composites were obtained by the co-precipitation method, followed by ultrasound-assisted and microwave radiation and thermal treatment at 250 °C. X-ray diffraction (XRD) confirmed the presence of a hexagonal phase in all the samples, while Fourier-transform infrared (FTIR) spectroscopy elucidated the interaction between HAp and MWCNTs. The photoluminescent technique revealed that HAp and the composite with non-functionalized MWCNTs present a blue luminescence, while the composite with functionalized MWCNTs, under UV-vis radiation shows an intense white emission. These findings allowed presentation of a proposal for the use of HAp and HAp with functionalized MWCNTs as potential materials for optoelectronic and medical applications.

Photocatalytic Activity of Fe-Doped ZnO/Montmorillonite Nanocomposite for Degradation of Malachite Green

2015 ◽  
Vol 827 ◽  
pp. 19-24 ◽  
Author(s):  
Nur Afifah ◽  
Nadia Febiana Djaja ◽  
Rosari Saleh
Keyword(s):  
Photocatalytic Activity ◽  
Malachite Green ◽  
Organic Dyes ◽  
Uv Light ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Spin Resonance ◽  
Doped Zno ◽  
Co Precipitation

In this study, the photocatalytic activity of pure Fe- doped ZnO and Fe- doped ZnO/Montmorillonite nanocomposite has been investigated for the degradation of malachite green under UV light irradiation. Both photocatalysts were synthesized using co-precipitation method and characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, Fourier-transform infrared absorption, and electron spin resonance. The results showed that the photocatalytic efficiency is better in the presence of montmorillonite compared to pure Fe- doped ZnO. To detect the possible reactive species involved in degradation of organic dyes control experiments with introducing scavengers into the solution of organic dyes were carried out. It is found that electron plays an important role in the degradation of malachite green.

Template Induced Synthesis of Nano-Hydroxyapatite by Co-Precipitation Method

2011 ◽  
Vol 311-313 ◽  
pp. 1713-1716 ◽  
Author(s):  
Yan Rong Sun ◽  
Tao Fan ◽  
Chang An Wang ◽  
Li Guo Ma ◽  
Feng Liu
Keyword(s):  
Electron Microscope ◽  
Chondroitin Sulfate ◽  
Aspartic Acid ◽  
Transmission Electron Microscope ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Transmission Electron ◽  
Co Precipitation

Nano-hydroxyapatite with different morphology was synthesized by the co-precipitation method coupled with biomineralization using Ca(NO3)2•4H2O and (NH4)2HPO4 as reagents, adding chondroitin sulfate, agarose and aspartic acid as template. The structure and morphology of the prepared powders were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM).

Synthesis of Silica Modified Large-Sized Hydroxyapatite Whiskers by a Hydrothermal Co-Precipitation Method

2015 ◽  
Vol 645-646 ◽  
pp. 1339-1344 ◽  
Author(s):  
Yan Ting Yin ◽  
Qing Hua Chen ◽  
Ting Ting Yan ◽  
Qing Hua Chen
Keyword(s):  
Bone Repair ◽  
Ethanol Solution ◽  
Morphological Properties ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
New Type ◽  
Ft Ir ◽  
Co Precipitation ◽  
Surface Modified

The objective of this study was to develop a novel silica modified large-sized hydroxyapatite whiskers with improved properties for use in bone repair applications. Large-sized whiskers with a mean length of 250μm were obtained by a hydrothermal co-precipitation method at 150°C, 7.5Mpa in high-pressure reactor. Silica modified hydroxyapatite whiskers were prepared by dissolving TEOS in ethanol solution, then sintering with hydroxyapatite. The compositional and morphological properties of prepared whiskers were studied by means of x-ray diffraction (XRD), Fouier transform infrared (FT-IR), scanning electron microscopy (SEM). The results indicated the evidence of nanosilicon dioxide particles on the surface of HAP whiskers. The size of nanosilicon dioxide particles depends on dropping and stirring rate. Hence, this new type of silica modified large-sized hydroxyapatite whiskers is a valuable candidate for biomedical applications.Key words: hydroxyapatite, hydrothermal co-precipitation, surface modified, whiskers

Synthesis of Magnetic Modified Organobentonite as Adsorbent for Degradation of Orange II

2013 ◽  
Vol 838-841 ◽  
pp. 2306-2309
Author(s):  
Guang Hua Wang ◽  
Kun Chen ◽  
Wen Bing Li ◽  
Dong Wan ◽  
Qin Hu ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Reaction Medium ◽  
Precipitation Method ◽  
Basal Spacing ◽  
Orange Ii ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Co Precipitation ◽  
Scanning Electron

Magnetic modified organobentonite (Fe3O4/CTAB–Bent) was synthesized by chemical co-precipitation method in which CTAB–Bent was firstly achieved via ion–exchange.The composite materials have been characterized by powder X–ray diffraction (XRD), Fourier transform infrared spectroscopy (FT–IR) and Scanning electron microscopy (SEM) . The results revealed that basal spacing of bentonite was increased through organic modification and the Fe3O4 particles synthesized which covering the surfaces of bentonite .Compared with natural bentonite, the adsorption capacity of Fe3O4/CTAB–Bent for Orange II was greatly enhanced and can be easily separated from the reaction medium by an external magnetic field after the treatment.

Preparation and Electrochemical Performance of Mn3O4/GR Composites Electrode Material in Supercapacitors

2019 ◽  
Vol 807 ◽  
pp. 50-56
Author(s):  
Yun Long Zhou ◽  
Zhi Biao Hu ◽  
Li Mei Wu ◽  
Jiao Hao Wu
Keyword(s):  
Room Temperature ◽  
Raw Materials ◽  
Precipitation Method ◽  
Electrochemical Performances ◽  
Manganese Sulfate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Co Precipitation ◽  
A Current ◽  
Discharge Test

Using hydrated manganese sulfate and general type graphene (GR) as raw materials, Mn3O4/GR composite has been successfully prepared by the liquid phase chemical co-precipitation method at room temperature. X-ray diffraction (XRD) was used to investigate the phase structure of Mn3O4powder and Mn3O4/GR composite; The electrochemical performances of the samples were elucidated by cyclic voltammetry and galvanostatic charge-discharge test in 0.5 mol/L Na2SO4electrolyte. The results show that the Mn3O4/GR composite possesses graphene phase and good reversibility; the composite also displays a specific capacitance of 318.8 F/g at a current density of 1 A/g.

The Influence of Calcination Temperature on Quantitative Phase of Hematite from Iron Stone Tanah Laut

2015 ◽  
Vol 1112 ◽  
pp. 489-492
Author(s):  
Ali Mufid ◽  
M. Zainuri
Keyword(s):  
Particle Size ◽  
Calcination Temperature ◽  
Thermo Gravimetric Analysis ◽  
Precipitation Method ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Particle Size Analyzer ◽  
Co Precipitation

This research aims to form particles of hematite (α-Fe2O3) with a basis of mineral iron ore Fe3O4 from Tanah Laut. Magnetite Fe3O4 was synthesized using co-precipitation method. Further characterization using X-ray fluorescence (XRF) to obtain the percentage of the elements, obtained an iron content of 98.51%. Then characterized using thermo-gravimetric analysis and differential scanning calorimetry (TGA-DSC) to determine the calcination temperature, that at a temperature of 445 °C mass decreased by 0.369% due to increase in temperature. Further Characterization of X-ray diffraction (XRD) to determine the phases formed at the calcination temperature variation of 400 °C, 445 °C, 500 °C and 600 °C with a holding time of 5 hours to form a single phase α-Fe2O3 hematite. Testing with a particle size analyzer (PSA) to determine the particle size distribution, where test results indicate that the α-Fe2O3 phase of each having a particle size of 269.7 nm, 332.2 nm, 357.9 nm, 412.2 nm. The best quantity is shown at a temperature of 500 °C to form the hematite phase. This result is used as the calcination procedure to obtain a source of Fe ions in the manufacture of Lithium Ferro Phosphate.

Sign in / Sign up

Export Citation Format

Share Document