scholarly journals Characteristics of Paraffin Shielding of Kartini Reactor, Yogyakarta

2020 ◽  
Vol 35 (3) ◽  
pp. 195-198 ◽  
Author(s):  
Lana Khanifah ◽  
Susilo Widodo ◽  
Widarto ◽  
Ngurah Made Dharma Putra ◽  
Argo Satrio
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Ftir Spectroscopy ◽  
Nuclear Energy ◽  
Functional Group ◽  
Energy Agency ◽  
Radiation Attenuation ◽  
X Ray ◽  
Scanning Electron

The National Nuclear Energy Agency (BATAN) Yogyakarta uses two kinds of paraffin for shielding radiation of Kartini reactor. For developing BNCT research, the radiation attenuation capability of paraffin has been analyzed to find out the coefficient attenuation, density, and composition of both kinds of paraffin. The components of the paraffin were analyzed using Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) spectroscopy characterization. Paraffin P1 has a density of 0.689 gr/mL and paraffin P2 is 0.578 gr/mL. Paraffin samples P1 and P2 were the sample content of functional group CH, CH2, and OH when analyzed by FTIR. Paraffin P2 had an additional content namely CO. The concentration of carbon (C) and oxide (O) of paraffin P2 was much greater than that of paraffin P1. Hydrogen (H) in the paraffin has the function of moderating neutrons, but hydrogen content in both kinds of paraffin could not be detected by EDX. The acquired neutron coefficient attenuation of paraffin P2 was 0.0382 cm-1 and the gamma coefficient attenuation was 0.0535 cm-1.

scholarly journals Analytical Chemistry Methods of Estimating the Original Firing Temperature of Bricks from a 19th Century Convent in the Philippines: Perspective of a Southeast Asian Country | Mga Pamamaraan ng Mapanuring-Kimika sa Pagtantya ng Orihinal na Temperatura ng Pagsunog sa Ladrilyo Mula sa Isang Ika-19 na Siglong Kumbento sa Pilipinas: Pananaw ng Isang Bansa sa Timog-Silangang Asya

SPAFA Journal ◽  
2021 ◽  
Vol 5 ◽  
Author(s):  
Jan-Michael Cayme
Keyword(s):  
Analytical Chemistry ◽  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Ftir Spectroscopy ◽  
Firing Temperature ◽  
Fourier Transform Infrared ◽  
Energy Dispersive ◽  
X Ray ◽  
Scanning Electron

Countries in Southeast Asia have a unique and diverse culture due to its varied ethnic groups having different traditions and beliefs. The process of manufacturing building materials such as brick masonry is one aspect where this distinctiveness is manifested. This study provides a general analytical chemistry method that will estimate the original firing temperature of a historical brick material from a convent in Milaor, Camarines Sur, Philippines. Different instrumental techniques were utilized namely the Energy Dispersive X-ray Fluorescence (EDXRF), Fourier Transform Infrared (FTIR) Spectroscopy and Scanning Electron Microscopy with Energy Dispersive X-ray (SEM-EDX). From these techniques, the chemical and mineralogical composition of the brick was reported. The clay mixture used in the production of the brick is known to be non-calcareous and low refractory, that was fired in an oxidizing atmosphere. The brick’s microstructure is classified within the initial vitrification stage based on the features of the mineral transformations. The results of this study point to an estimated firing temperature range of 650°C to 850°C. An emphasis on the importance of chemical analysis in studying cultural heritage materials in the Southeast Asian region is also highlighted on this paper.  Ang mga bansa sa Timog-Silangang Asya ay may natatangi at magkakaibang kultura sanhi ng iba’t ibang mga pangkat etniko na may magkakaibang tradisyon at paniniwala. Ang pamamaraan ng paggawa sa mga materyales ng lumang gusali tulad ng ladrilyo ay isang aspeto kung saan naipapamalas ang pagkakaiba-iba nito. Ang pagaaral na ito ay nagbibigay ng isang pangkalahatang pamamaraan ng mapanuring-kimika para tantyahin ang orihinal na temperatura ng paggawa sa lumang ladrilyo mula sa isang kumbento ng Milaor, Camarines Sur, Pilipinas. Iba’t ibang mga instrumento ang ginamit tulad ng Energy Dispersive X-ray Fluorescence (EDXRF), Fourier Transform Infrared (FTIR) Spectroscopy at ang Scanning Electron Microscopy na nakakabit sa Energy Dispersive X-ray (SEM-EDX). Mula sa mga intrumentong ito, ang kemikal at mineral na komposisyon ng ladrilyo ay iniulat. Ang mga pinaghalong luad na ginamit sa paggawa ng ladrilyo ay masaasabing hindi gaanong madami ang bilang ng kalsiyo at mababang refractory, na sinunog sa isang kapaligiran na sagana sa hangin. Ang mga pinaka-maliliit na istruktura ng ladrilyo ay masasabing nasa paunang yugto ng pagtunaw ng mga mineral sa luad, batay sa mga pagbabagong anyo ng mga ito. Sa mga resulta ng pagaaral, masasabi na ang tantyang temperatura ng pagsunog ay nasa 650°C hanggang 850°C. Binibigyan ng diin ang kahalagahan ng pagsusuri ng kimika sa pagaaral ng mga materyales na pamanang kultura sa rehiyon ng Timog-Silangang Asya ay naitala din sa pagaaral na ito.

scholarly journals Elemental and Infrared Characterization of Contaminants in Second-Hand Cotton Garments From Flea Markets In Valencia City, Bukidnon, Philippines

2018 ◽  
Vol 8 (1) ◽  
pp. 10
Author(s):  
Marilou Auxtero Pedroso Butanas ◽  
Bienvenido Masirin Butanas Jr.
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Functional Group ◽  
X Ray ◽  
Cotton Material ◽  
Flea Markets ◽  
Flea Market ◽  
Scanning Electron

The use of Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) characterizations have been indispensable techniques in distinguishing purity of the samples. These techniques give spectra that will be used to analyze the composition, morphology, purity, among others, of the material. One of its interesting applications is to assess elemental and chemical contaminations on second hand clothing. In this study, second hand (Ukay-Ukay) cotton garments from selected flea market sites in Valencia City, Bukidnon, Philippines were examined quantitatively for microbial and chemical contaminations by using FTIR, SEM, and EDX. The FTIR results obtained in both sites showed broad peaks at ~3336 cm-1 attributed to OH functional group, and absorption peaks at 2901.30 cm-1 associated to C-H bond, 1159.70 cm-1, 1107.44 cm-1 and 1053.82 cm-1 attributed to the stretches of CO bond. All of them were characteristics of cotton material. We observed degradation of the cotton material on both sites evident in the decreasing intensity of OH stretching (at peaks around ~3334 cm -1 [site A] and ~3332 cm -1 [site B]) and C-O stretching (around ~1500-1700 cm-1). These were due to the presence of microorganisms such as fungi (e.g. Aspergillus species). The degradation was also observed in the SEM results. Furthermore, peaks related to carboxylate contaminants were observed in both sites around ~1600 – 1800 cm-1 that may be caused by the exposure of the cotton garments in hydrochloric acid (HCl). In general, the characterization results on both sites indicated traces of microorganisms and that the second-hand cotton clothes were contaminated by hazardous chemicals.

scholarly journals The Effect of Chemical Activation Using Base Solution With Various Concentrations Towards Sarulla Natural Zeolite

Elkawnie ◽  
2020 ◽  
Vol 6 (1) ◽  
pp. 85
Author(s):  
Saharman Gea ◽  
Agus Haryono ◽  
Andriayani Andriayani ◽  
Junifa Layla Sihombing ◽  
Ahmad Nasir Pulungan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Ftir Spectroscopy ◽  
Natural Zeolite ◽  
Gas Adsorption ◽  
Chemical Activation ◽  
Fourier Transform Infrared ◽  
X Ray ◽  
Scanning Electron

Abstract : Material characteristics analysis of Sarulla natural zeolite (SNZ) with base activation has been carried out. The base used was NaOH at various concentrations; 0.2 M, 0.5 M, and 2 M. Base activated catalysts were characterized by X-ray Fluorescence (XRF), X-ray diffractometer (XRD), Fourier-transform Infrared (FTIR) Spectroscopy, Scanning Electron Microscopy (SEM) and gas adsorption analysis using BET method. The procedures applied have caused differences in adsorption and desorption rates as well as the crystallinity values of the catalytic materials. Moreover, the ratio of Si/Al contents has also changed at the lowest concentration. On the other hand, the crystallinity of catalysts has decreased at the highest concentration of base applied. The results are reinforced in FTIR characterization which shows the changes of silanol bonds to become silicate and aluminate. Furthermore, morphological analysis of the catalysts shows that homogenous surface was obtained at low concentration, while rough/lumpy surfaces was obtained at higher concentration.Abstrak : Analisis terhadap karakteristik material dari zeolit alam Sarulla (SNZ) dengan metode aktivasi basa telah dilakukan. Basa yang digunakan ialah NaOH dengan berbagai konsentrasi; 0,2 M; 0,5 M, dan 2 M. Katalis yang telah diaktivasi dengan basa kemudian dikarakterisasi dengan Analisis X-ray Fluorescence (XRF), X-ray diffractometer (XRD), Fourier-transform Infrared (FTIR) Spectroscopy, Scanning Electron Microscopy (SEM) dan Gas Adsorption menggunakan metode BET. Dari hasil penelitian, ditemukan perbedaan pada tingkat adsorpsi dan desorpsi, begitu juga dengan kristalinitas pada material katalis. Lebih jauh, rasio konten Si/Al juga berubah pada basa dengan konsentrasi terendah. Di sisi lain, tingkat kristalinitas dari katalis mengalami penurunan pada basa dengan konsentrasi tertinggi. Hasil ini diperkuat dengan data FTIR yang menunjukkan perubahan ikatan silanol menjadi silikat dan aluminat. Lebih jauh, analisis morfologi pada katalis menunjukkan bahwa permukaan yang homogen didapatkan dari penggunaan basa dengan konsentrasi rendah. Sebaliknya, basa dengan konsentrasi tinggi memberikan bentuk permukaan katalis yang tidak homogen serta kasar.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

Preparation of Borosilicate Xerogel and Research on its Mineralization

2012 ◽  
Vol 476-478 ◽  
pp. 2059-2062
Author(s):  
Chen Wang ◽  
Ya Dong Li ◽  
Gu Qiao Ding
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Ph Value ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Compositional Changes ◽  
Scanning Electron

Tributyl borate was first adopted for the introduction of boron in the preparation of bioactive borosilicate xerogel by sol-gel method. The xerogel reacted continuously in 0.25M K2HPO4 solution with a starting pH value of 7.0 at 37 °C for 1day. The structural, morphologies and compositional changes resulting from the conversion were characterized using X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy. The results indicated that speed of formation of HA was cut way back on the time with the addition of boron and the induction period for the HA nucleation on the surface of the borosilicate xerogel was short than 1 days. The conversion mechanism of the borosilicate xerogels to hydroxyapaptite was also discussed.

scholarly journals The Characteristics of Padamarang Magnesite under Calcination and Hydrothermal Treatment

2019 ◽  
Vol 29 (2) ◽  
Author(s):  
Mutia Dewi Yuniati ◽  
Feronika Cinthya Mawarni Putri Wawuru ◽  
Anggoro Tri Mursito ◽  
Iwan Setiawan ◽  
Lediyantje Lintjewas
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Hydrothermal Treatment ◽  
Energy Dispersive ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Magnesite (MgCO3) is the main source for production of magnesium and its compound. In Indonesia, magnesite is quite rare and can be only found in limited amount in Padamarang Island, Southeast Sulawesi Provence. Thus the properties of magnesite and the reactivity degree of the obtained product are of technological importance. The aim of this work was to analyze the characteristics of Padamarang magnesite under calcination and hydrothermal treatment processes. The processes were carried out at various temperatures with range of 150-900°C for 30 minutes. The solids were characterized with respect to their chemical and physical properties by using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). SEM image indicates that magnesite was formed from thin and flat hexagon sheets. The FTIR and XRD analysis disclose that MgO formed at temperature above 300°C, where as the magnesite sample also lost its mass around 50%. These results demonstrate that Padamarang magnesite decomposes to magnesium oxide and carbon dioxide at high temperature.Magnesit (MgCO3) merupakan sumber utama untuk produksi magnesium dan senyawa-senyawanya. Di Indonesia, magnesit cukup jarang dan hanya dapat ditemukan dalam jumlah yang terbatas di Pulau Padamarang, Propinsi Sulawesi Tenggara. Oleh karena itu sifat magnesit dan derajat reaktivitas dari produk-produk magnesit penting untuk diketahui. Penelitian ini bertujuan untuk menganalisis karakteristik magnesit Padamarang dengan perlakuan kalsinasi dan hidrothermal.  Proses dilakukan pada temperatur yang bervariasi dari 150-900°C selama 30 menit. Sifat kimia dan fisika dari magnesit dikarakterisasi dengan menggunakan scanning electron microscopy dengan energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier-transform infrared spectroscopy (FTIR), dan X-ray diffraction (XRD). Gambar dari analisis SEM menunjukkan bahwa magnesit terbentuk dari lembaran-lembaran heksagonal yang tipis dan datar. Hasil analisis dengan FTIR dan XRD menunjukkan bahwa MgO terbentuk pada temperatur diatas 300°C, dimana sampel magnesit juga kehilangan massanya sekitar 50% pada suhu tersebut. Hal ini menunjukkan bahwa Magnesit Padamarang terdekomposisi menjadi magnesium oksida dan karbon dioksida pada temperatur tinggi.

scholarly journals Influence of Hydroxyapatite Nanospheres in Dentin Adhesive on the Dentin Bond Integrity and Degree of Conversion: A Scanning Electron Microscopy (SEM), Raman, Fourier Transform-Infrared (FTIR), and Microtensile Study

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2948
Author(s):  
Rana S Al-Hamdan ◽  
Basil Almutairi ◽  
Hiba F Kattan ◽  
Noura A. Alsuwailem ◽  
Imran Farooq ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Fourier Transform Infrared ◽  
Study Groups ◽  
Degree Of Conversion ◽  
Hybrid Layer ◽  
X Ray ◽  
And Control ◽  
Scanning Electron

An experimental adhesive incorporated with different nano-hydroxyapatite (n-HA) particle concentrations was synthesized and analyzed for dentin interaction, micro-tensile bond strength (μTBS), and degree of conversion (DC). n-HA powder (5 wt % and 10 wt %) were added in adhesive to yield three groups; gp-1: control experimental adhesive (CEA, 0 wt % HA), gp-2: 5 wt % n-HA (HAA-5%), and gp-3: 10 wt % n-HA (HAA-10%). The morphology of n-HA spheres was evaluated using Scanning Electron Microscopy (SEM). Their interaction in the adhesives was identified with SEM, Energy-Dispersive X-ray (EDX), and Micro-Raman spectroscopy. Teeth were sectioned, divided in study groups, and assessed for μTBS and failure mode. Employing Fourier Transform-Infrared (FTIR) spectroscopy, the DC of the adhesives was assessed. EDX mapping revealed the occurrence of oxygen, calcium, and phosphorus in the HAA-5% and HAA-10% groups. HAA-5% had the greatest μTBS values followed by HAA-10%. The presence of apatite was shown by FTIR spectra and Micro-Raman demonstrated phosphate and carbonate groups for n-HA spheres. The highest DC was observed for the CEA group followed by HAA-5%. n-HA spheres exhibited dentin interaction and formed a hybrid layer with resin tags. HAA-5% demonstrated superior μTBS compared with HAA-10% and control adhesive. The DC for HAA-5% was comparable to control adhesive.

Sign in / Sign up

Export Citation Format

Share Document