scholarly journals The Effect of Chemical Activation Using Base Solution With Various Concentrations Towards Sarulla Natural Zeolite

Elkawnie ◽  
2020 ◽  
Vol 6 (1) ◽  
pp. 85
Author(s):  
Saharman Gea ◽  
Agus Haryono ◽  
Andriayani Andriayani ◽  
Junifa Layla Sihombing ◽  
Ahmad Nasir Pulungan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Ftir Spectroscopy ◽  
Natural Zeolite ◽  
Gas Adsorption ◽  
Chemical Activation ◽  
Fourier Transform Infrared ◽  
X Ray ◽  
Scanning Electron

Abstract : Material characteristics analysis of Sarulla natural zeolite (SNZ) with base activation has been carried out. The base used was NaOH at various concentrations; 0.2 M, 0.5 M, and 2 M. Base activated catalysts were characterized by X-ray Fluorescence (XRF), X-ray diffractometer (XRD), Fourier-transform Infrared (FTIR) Spectroscopy, Scanning Electron Microscopy (SEM) and gas adsorption analysis using BET method. The procedures applied have caused differences in adsorption and desorption rates as well as the crystallinity values of the catalytic materials. Moreover, the ratio of Si/Al contents has also changed at the lowest concentration. On the other hand, the crystallinity of catalysts has decreased at the highest concentration of base applied. The results are reinforced in FTIR characterization which shows the changes of silanol bonds to become silicate and aluminate. Furthermore, morphological analysis of the catalysts shows that homogenous surface was obtained at low concentration, while rough/lumpy surfaces was obtained at higher concentration.Abstrak : Analisis terhadap karakteristik material dari zeolit alam Sarulla (SNZ) dengan metode aktivasi basa telah dilakukan. Basa yang digunakan ialah NaOH dengan berbagai konsentrasi; 0,2 M; 0,5 M, dan 2 M. Katalis yang telah diaktivasi dengan basa kemudian dikarakterisasi dengan Analisis X-ray Fluorescence (XRF), X-ray diffractometer (XRD), Fourier-transform Infrared (FTIR) Spectroscopy, Scanning Electron Microscopy (SEM) dan Gas Adsorption menggunakan metode BET. Dari hasil penelitian, ditemukan perbedaan pada tingkat adsorpsi dan desorpsi, begitu juga dengan kristalinitas pada material katalis. Lebih jauh, rasio konten Si/Al juga berubah pada basa dengan konsentrasi terendah. Di sisi lain, tingkat kristalinitas dari katalis mengalami penurunan pada basa dengan konsentrasi tertinggi. Hasil ini diperkuat dengan data FTIR yang menunjukkan perubahan ikatan silanol menjadi silikat dan aluminat. Lebih jauh, analisis morfologi pada katalis menunjukkan bahwa permukaan yang homogen didapatkan dari penggunaan basa dengan konsentrasi rendah. Sebaliknya, basa dengan konsentrasi tinggi memberikan bentuk permukaan katalis yang tidak homogen serta kasar.

scholarly journals Analytical Chemistry Methods of Estimating the Original Firing Temperature of Bricks from a 19th Century Convent in the Philippines: Perspective of a Southeast Asian Country | Mga Pamamaraan ng Mapanuring-Kimika sa Pagtantya ng Orihinal na Temperatura ng Pagsunog sa Ladrilyo Mula sa Isang Ika-19 na Siglong Kumbento sa Pilipinas: Pananaw ng Isang Bansa sa Timog-Silangang Asya

SPAFA Journal ◽  
2021 ◽  
Vol 5 ◽  
Author(s):  
Jan-Michael Cayme
Keyword(s):  
Analytical Chemistry ◽  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Ftir Spectroscopy ◽  
Firing Temperature ◽  
Fourier Transform Infrared ◽  
Energy Dispersive ◽  
X Ray ◽  
Scanning Electron

Countries in Southeast Asia have a unique and diverse culture due to its varied ethnic groups having different traditions and beliefs. The process of manufacturing building materials such as brick masonry is one aspect where this distinctiveness is manifested. This study provides a general analytical chemistry method that will estimate the original firing temperature of a historical brick material from a convent in Milaor, Camarines Sur, Philippines. Different instrumental techniques were utilized namely the Energy Dispersive X-ray Fluorescence (EDXRF), Fourier Transform Infrared (FTIR) Spectroscopy and Scanning Electron Microscopy with Energy Dispersive X-ray (SEM-EDX). From these techniques, the chemical and mineralogical composition of the brick was reported. The clay mixture used in the production of the brick is known to be non-calcareous and low refractory, that was fired in an oxidizing atmosphere. The brick’s microstructure is classified within the initial vitrification stage based on the features of the mineral transformations. The results of this study point to an estimated firing temperature range of 650°C to 850°C. An emphasis on the importance of chemical analysis in studying cultural heritage materials in the Southeast Asian region is also highlighted on this paper.  Ang mga bansa sa Timog-Silangang Asya ay may natatangi at magkakaibang kultura sanhi ng iba’t ibang mga pangkat etniko na may magkakaibang tradisyon at paniniwala. Ang pamamaraan ng paggawa sa mga materyales ng lumang gusali tulad ng ladrilyo ay isang aspeto kung saan naipapamalas ang pagkakaiba-iba nito. Ang pagaaral na ito ay nagbibigay ng isang pangkalahatang pamamaraan ng mapanuring-kimika para tantyahin ang orihinal na temperatura ng paggawa sa lumang ladrilyo mula sa isang kumbento ng Milaor, Camarines Sur, Pilipinas. Iba’t ibang mga instrumento ang ginamit tulad ng Energy Dispersive X-ray Fluorescence (EDXRF), Fourier Transform Infrared (FTIR) Spectroscopy at ang Scanning Electron Microscopy na nakakabit sa Energy Dispersive X-ray (SEM-EDX). Mula sa mga intrumentong ito, ang kemikal at mineral na komposisyon ng ladrilyo ay iniulat. Ang mga pinaghalong luad na ginamit sa paggawa ng ladrilyo ay masaasabing hindi gaanong madami ang bilang ng kalsiyo at mababang refractory, na sinunog sa isang kapaligiran na sagana sa hangin. Ang mga pinaka-maliliit na istruktura ng ladrilyo ay masasabing nasa paunang yugto ng pagtunaw ng mga mineral sa luad, batay sa mga pagbabagong anyo ng mga ito. Sa mga resulta ng pagaaral, masasabi na ang tantyang temperatura ng pagsunog ay nasa 650°C hanggang 850°C. Binibigyan ng diin ang kahalagahan ng pagsusuri ng kimika sa pagaaral ng mga materyales na pamanang kultura sa rehiyon ng Timog-Silangang Asya ay naitala din sa pagaaral na ito.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

scholarly journals Influence of Hydroxyapatite Nanospheres in Dentin Adhesive on the Dentin Bond Integrity and Degree of Conversion: A Scanning Electron Microscopy (SEM), Raman, Fourier Transform-Infrared (FTIR), and Microtensile Study

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2948
Author(s):  
Rana S Al-Hamdan ◽  
Basil Almutairi ◽  
Hiba F Kattan ◽  
Noura A. Alsuwailem ◽  
Imran Farooq ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Fourier Transform Infrared ◽  
Study Groups ◽  
Degree Of Conversion ◽  
Hybrid Layer ◽  
X Ray ◽  
And Control ◽  
Scanning Electron

An experimental adhesive incorporated with different nano-hydroxyapatite (n-HA) particle concentrations was synthesized and analyzed for dentin interaction, micro-tensile bond strength (μTBS), and degree of conversion (DC). n-HA powder (5 wt % and 10 wt %) were added in adhesive to yield three groups; gp-1: control experimental adhesive (CEA, 0 wt % HA), gp-2: 5 wt % n-HA (HAA-5%), and gp-3: 10 wt % n-HA (HAA-10%). The morphology of n-HA spheres was evaluated using Scanning Electron Microscopy (SEM). Their interaction in the adhesives was identified with SEM, Energy-Dispersive X-ray (EDX), and Micro-Raman spectroscopy. Teeth were sectioned, divided in study groups, and assessed for μTBS and failure mode. Employing Fourier Transform-Infrared (FTIR) spectroscopy, the DC of the adhesives was assessed. EDX mapping revealed the occurrence of oxygen, calcium, and phosphorus in the HAA-5% and HAA-10% groups. HAA-5% had the greatest μTBS values followed by HAA-10%. The presence of apatite was shown by FTIR spectra and Micro-Raman demonstrated phosphate and carbonate groups for n-HA spheres. The highest DC was observed for the CEA group followed by HAA-5%. n-HA spheres exhibited dentin interaction and formed a hybrid layer with resin tags. HAA-5% demonstrated superior μTBS compared with HAA-10% and control adhesive. The DC for HAA-5% was comparable to control adhesive.

Biocidal activity of curcumin and cationic polymer possessing composites

2020 ◽  
Vol 35 (4-5) ◽  
pp. 389-398
Author(s):  
Tarık Eren ◽  
Gülay Baysal ◽  
Faik Doğan
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Curcuma Longa ◽  
Antibacterial Properties ◽  
Fourier Transform Infrared ◽  
Diffusion Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

There is a growing interest in new type of biocidal compounds with antibacterial properties against bacteria. In this study, new antibacterial synthetic materials bearing curcumin and cationic polymers were synthesized. In the synthesis stage, the methacrylate functional cationic monomer was synthesized via the Michael addition route by using 3-acryloxy-2-hydroxypropyl methacrylate and 3-amino pyridine to obtain Monomer 1. Monomer 1 was further quaternized with hexyl bromide to obtain a cationic methacrylate functional monomer. Free-radical polymerization of Monomer 1 and methyl acrylate was conducted in the presence of azobisisobutyronitrile under dimethylformamide solvent. The composite formulation was conducted by using turmeric extract Curcuma longa (curcumin), hydroxyapatite, montmorillonite, and silver nitrate. The materials were analyzed by using the methods of X-ray diffraction, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and scanning electron microscopy. The biocidal activities against the bacteria Escherichia coli, Listeria monocytogenes, Salmonella, and Staphylococcus aureus were analyzed using agar well diffusion method. From the Fourier transform infrared, X-ray diffraction, and scanning electron microscopy analysis results of the synthesized nanocomposites, it is seen that they form strong connections with the components added to the composites and form an exfoliated structure. According to the antibacterial analysis results, the nanocomposites obtained have showed a strong antibacterial resistance against E.coli, L.monocytogenes, Salmonella, and S. aureus bacteria, and the high inhibition zone areas were obtained.

Ethylenediamine Processed Cu2SnS3 Nano Particles via Mild Solution Route

2016 ◽  
Vol 19 (1) ◽  
pp. 001-005 ◽  
Author(s):  
Paul Nesamony Prathiba Jeya Helan ◽  
Kannusamy Mohanraj ◽  
Sethuramachandran Thanikaikarasan ◽  
Thaiyan Mahalingam ◽  
Ganesan Sivakumar ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Fourier Transform Infrared ◽  
Nano Particles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electron Microscopy Analysis ◽  
Microscopy Techniques ◽  
Scanning Electron

Copper tin sulphide nanoparticles have been prepared by solution growth technique at various ethylenediamine concentrations. Prepared samples have been characterized using x-ray diffraction, fourier transform infrared, Raman and scanning electron microscopy techniques. x-ray diffraction results revealed that the prepared samples are nanocrystalline in nature with tetragonal structure. Fourier transform infrared spectroscopy analysis results showed the presence of Cu-O, Sn-O and Sn-S vibrations in the wavenumber range between 450 and 620 cm-1. Vibrational symmetry of prepared samples have been analyzed using Raman spectroscopy. Scanning electron microscopy analysis indicated the formation of flower like nanocrystals for samples prepared at various Ethylenediamine concentrations.

Regeneration of the Brewing Spent Diatomite

2014 ◽  
Vol 998-999 ◽  
pp. 1425-1428 ◽  
Author(s):  
Wen Ya Mei ◽  
Teng Hong Hui
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Surface Area ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
X Ray ◽  
Remarkable Increase ◽  
Efficient Adsorbent ◽  
Scanning Electron

Brewing spent diatomite (BSDT), a beer industrial by-product, was regenerated with calcination. The characteristics of regenerated BSDT were detected by X-ray diffraction, X-ray fluorescence, Fourier-transform infrared, and scanning electron microscopy. The results showed that the mineralization of the surface adsorbate and the remarkable increase in the Si-OH decreased the pHpzc value from 7.6 to 5.2 and increased the surface area from 36 m2/g to 52 m2/g after calcination at 800 °C. The results show that the regenerated BSTD could be employed as an efficient adsorbent for the recycling of BSDT.

scholarly journals Sintesis karboksimetil selulosa dari sisa baglog jamur tiram (Pleurotus ostreatus) (Synthesis of carboxymethyl cellulose from ex-baglog of oyster mushroom (Pleurotus ostreatus))

2018 ◽  
Vol 86 (2) ◽  
Author(s):  
Firda DIMAWARNITA ◽  
TRI - PANJI
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Pleurotus Ostreatus ◽  
Carboxymethyl Cellulose ◽  
Fourier Transform Infrared ◽  
Oyster Mushroom ◽  
Cellulose Content ◽  
X Ray ◽  
Scanning Electron

Oil palm empty fruit bunches (OPEFB) contain high organic materials that can be used as medium for growing white oyster mushroom (Pleurotus ostreatus).Cellulose content in the OPEFB is high (33%), enabling it to be converted to carboxymethyl cellulose (CMC). This study determined the characteristics of the CMC produced from the waste of growth media of oyster mushrooms (baglog). The composition of the baglog consists of 70.3% OPEFB; 23.4% sawdust; 4.5% bran; 1.3% CaCO3; and 0.4% TSP. The CMC was prepared from the ex-baglog of the mushrooms including delignification, alkalization, carboxylation, and characterization of the product using Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Difraction (XRD) and Scanning Electron Microscopy Analysis (SEM). The results showed that the raw material after treatment contained 80.20% a cellulose, 12.32% hemicellulose, and no lignin was found. FTIR-based functional group analysis of the CMC and the commercial CMC was found to be present at 1091,37 cm-1and 1016,84 cm-1for the C-O bond. SEM analysis of the sample with no chemical bleaching for further delignification showed that small impurities were still present. The CMC treated with 10% sodium hydroxide exhibited 0.64 degree of substitution, 43 cP viscosity, and 73.40% purity. Based on these results, ex-baglog of white oyster mushroom can be extracted into CMC.[Keywords:OPEFB, CMC, delignification,  Pleurotus ostreatus, XRD, SEM]. Abstrak Tandan kosong kelapa sawit (TKKS) mengandung bahan organik tinggi yang bisa dijadikan sebagai media pertumbuhan jamur tiram putih (Pleurotus ostreatus). Kandungan selulosa dalam TKKS (33%) yang mungkin dikonversi menjadi karboksimetil selulosa (CMC). Penelitian ini bertujuan mencirikan CMC yang dihasilkan dari limbah media pertumbuhan jamur tiram (baglog). Komposisi baglog sebagai media pertumbuhan jamur tersebut terdiri atas TKKS 70,3%; serbuk gergaji 23,4%; dedak 4,5%; CaCO31,3%; dan TSP 0,4%. Penyiapan CMC dari ex-baglog jamur meliputi delignifikasi, alkalisasi, karboksilasi, dan karakterisasi produk CMC dengan analisis Fourier Transform Infrared Spetroscopy(FTIR), X-Ray Difraction(XRD) dan Scanning Electron Microscopy(SEM). Hasil penelitian menunjukkan bahwa ex-baglog setelah perlakuan mengandung ɑ-selulosa sebanyak 80,20%, hemiselulosa 12,32%, lignin 0%, dan sisanya merupakan impurities(b/b). Gugus fungsi CMC dari TKKS dan CMC komersial memperlihatkan serapan inframerah pada 1091 cm-1dan 1017 cm-1untuk ikatan C-O. Analisis dengan mikroskop elektron menunjukkan bahwa tanpa delignifikasi lebih lanjut, masih ditemukan kotoran. Karakteristik CMC yang diolah dengan natrium hidroksida 10% memiliki derajat substitusi 0,64, viskositas 43 cP, dan kemurnian 73,40%. Hasil tersebut menunjukkan bahwa sisa baglog perumbuhan jamur tiram dapat diekstraksi menjadi CMC.  [Kata kunci:TKKS,  CMC,  delignifikasi,  Pleurotus ostreatus, XRD, SEM].

scholarly journals Sintesis dan Karakterisasi Selulosa Bakteri Tercangkok Poliakrilonitril dan Teramidoksimasi Menggunakan Teknik Pra-iradiasi

2016 ◽  
Vol 11 (1) ◽  
pp. 1 ◽  
Author(s):  
Oktaviani Oktaviani ◽  
Emil Budianto ◽  
Sugiarto Danu
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Fourier Transform Infrared ◽  
Acetobacter Xylinum ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermal Gravimetry ◽  
Scanning Electron

Penelitian ini bertujuan untuk mempelajari kopolimerisasi cangkok akrilonitril pada selulosa bakteri (SB) dengan inisiasi radiasi serta penambahan hidroksilamin untuk menghasilkan gugus amidoksim. Pencangkokan akrilonitril pada SB diharapkan dapat meningkatkan ketahanan termal SB. Sedangkan SB yang bersifat sebagai pengkelat ion-ion logam berat, diharapkan dapat dihasilkan melalui penambahan hidroksilamin. Film selulosa bakteri telah berhasil dibuat dari air kelapa yang diinokulasi dengan bakteri Acetobacter xylinum. Film selulosa bakteri (SB) selanjutnya diiradiasi dengan berkas elektron pada rentang dosis 15-120 kGy, laju dosis 15 kGy/pass pada suhu 30 + 1 0C. Setelah diiradiasi, SB tersebut dikopolimerisasi cangkok dengan monomer akrilonitril. Kondisi optimum untuk kopolimerisasi cangkok akrilonitril pada SB adalah pada dosis 75 kGy, suhu 600C, waktu 3 jam, dan konsentrasi akrilonitril 30% b/b. Derajat pencangkokan tertinggi yang diperoleh adalah 56,03 %. Selulosa bakteri tercangkok akrilonitril (SB tercangkok PAN) selanjutnya diamidoksimasi. Amidoksimasi dilakukan dengan penambahan hidroksilamin hidroklorida 6 % b/v dalam pelarut metanol:air = 50:50 v/v pada pH 7, dan diperoleh waktu optimum selama 2 jam dengan densitas gugus amidoksim sebesar 5,425 mmol/ g. Hasil karakterisasi dengan Fourier Transform Infrared (FTIR) menunjukkan adanya spektrum spesifik gugus siano setelah proses pencangkokan akrilonitril pada SB dan intensitasnya menurun setelah diamidoksimasi. Hal tersebut diperkuat dengan hasil uji Scanning Electron Microscopy (SEM) yang memperlihatkan adanya gugus siano yang menempel setelah pencangkokan, dan gugus tersebut tidak terlihat lagi setelah amidoksimasi. Dari hasil uji dengan X-ray Diffraction (XRD), indeks kristalinitas SB tercangkok PAN akan semakin rendah dengan meningkatnya derajat pencangkokan dan pengujian dengan Thermal Gravimetry Analysis (TGA) menunjukkan bahwa ketahanan panas SB tercangkok PAN meningkat.

scholarly journals Characteristics of Paraffin Shielding of Kartini Reactor, Yogyakarta

2020 ◽  
Vol 35 (3) ◽  
pp. 195-198 ◽  
Author(s):  
Lana Khanifah ◽  
Susilo Widodo ◽  
Widarto ◽  
Ngurah Made Dharma Putra ◽  
Argo Satrio
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Ftir Spectroscopy ◽  
Nuclear Energy ◽  
Functional Group ◽  
Energy Agency ◽  
Radiation Attenuation ◽  
X Ray ◽  
Scanning Electron

The National Nuclear Energy Agency (BATAN) Yogyakarta uses two kinds of paraffin for shielding radiation of Kartini reactor. For developing BNCT research, the radiation attenuation capability of paraffin has been analyzed to find out the coefficient attenuation, density, and composition of both kinds of paraffin. The components of the paraffin were analyzed using Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy dispersive X-ray (EDX) spectroscopy characterization. Paraffin P1 has a density of 0.689 gr/mL and paraffin P2 is 0.578 gr/mL. Paraffin samples P1 and P2 were the sample content of functional group CH, CH2, and OH when analyzed by FTIR. Paraffin P2 had an additional content namely CO. The concentration of carbon (C) and oxide (O) of paraffin P2 was much greater than that of paraffin P1. Hydrogen (H) in the paraffin has the function of moderating neutrons, but hydrogen content in both kinds of paraffin could not be detected by EDX. The acquired neutron coefficient attenuation of paraffin P2 was 0.0382 cm-1 and the gamma coefficient attenuation was 0.0535 cm-1.

Sign in / Sign up

Export Citation Format

Share Document