scholarly journals Evaluation of Thermal Comfort in the Traditional Bourgeoisie Houses in Beirut

2020 ◽  
Vol 3 (1) ◽  
pp. p1
Author(s):  
Jad Hammoud ◽  
Elise Abi Rached
Keyword(s):  
Thermal Comfort ◽  
Natural Ventilation ◽  
Heat Waves ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Residential Buildings ◽  
Ventilation System ◽  
Electricity Consumption ◽  
Comfort Level ◽  
Climate Zones

The increasing of energy demands has considerably increased the requirements for new and traditional buildings in different climate zones. Unprecedented heat waves have increased climate temperature, in particular, in moderate climate zones such as Lebanon. In Beirut, only the residential sector consumes 50% of total electricity consumption. HVAC (Heating, Ventilation and Air conditioning) systems are used to reach acceptable thermal comfort levels in the new residential buildings. In case of the traditional bourgeoisie houses in Beirut, there are no discussions about the use of HVAC systems to achieve the required thermal comfort level. Thus, to reach an acceptable thermal comfort level, these houses which already contain natural ventilation system shall adapt the modern thermal comfort requirements and thermal comfort strategies and technologies where their architectural features and existing materials condition the available solutions. In order to identify the best options within the possible intervention lines (envelopes, passive strategies, equipment, renewable energy systems), it is necessary to perceive the real performance of this type of houses. In this context, the article presents the results of the study of thermal performance and comfort in a three case studies located in Beirut. Detailed field data records collected are analyzed, with a view to identify the indoor thermal environment with respect to outdoor thermal environment in different seasons. Monitoring also included measurement of hygrothermal parameters and surveys of occupant thermal sensation.

scholarly journals Enhancement of Thermal Comfort Inside the Kitchen of Non-Airconditioned Railway Pantry Car

2021 ◽  
Vol 39 (1) ◽  
pp. 275-291
Author(s):  
Md Sarfaraz Alam ◽  
Urmi Ravindra Salve
Keyword(s):  
Thermal Comfort ◽  
Air Temperature ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Ventilation System ◽  
Comfort Level ◽  
Air Velocity ◽  
Sustainable Improvement ◽  
Study Results ◽  
Air Ventilation

There are ample literature studies available, focusing on hot-humid built environment, which have achieved an increase in thermal comfort conditions by proper installation of ventilation-systems. The present thermal comfort study has been carried out in the kitchen environment of a non-air-conditioned railway pantry car in Indian Railways. The purpose is to enhance thermal comfort level under the currently applied ventilation system inside the kitchen of pantry car by determining the standard effective temperature (SET) index. During the summer and winter seasons, a field study was carried out to obtain the value of air temperature, globe temperature, relative humidity, and air velocity inside the pantry car for estimation of the SET index. A computational fluid dynamics (CFD) analysis was used to obtain a better-modified case model of the pantry car kitchen for the improvement of thermal comfort. The design interventions for the pantry car kitchen were created, with emphasis on increasing energy efficiency based on low-power consumption air ventilation system. The study results indicated that, modified case-I model has a better ventilation design concept as compare to the existing and other models, which increased the air velocity and significantly decreased the air temperature inside the kitchen of pantry car at all cooking periods. A value of SET (28.6–30℃) was found with a comfortable thermal sensation within all cooking periods, which is better for the pantry car workers. This finding suggests a sustainable improvement in the thermal environment of the "non-air-conditioned" pantry car kitchen in the Indian Railways, which can be applied immediately.

scholarly journals Thermal Perception in Mild Climate: Adaptive Thermal Models for Schools

2019 ◽  
Vol 11 (14) ◽  
pp. 3948 ◽  
Author(s):  
Miguel Ángel Campano ◽  
Samuel Domínguez-Amarillo ◽  
Jesica Fernández-Agüera ◽  
Juan José Sendra
Keyword(s):  
Thermal Comfort ◽  
Natural Ventilation ◽  
Energy Use ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Comfort Level ◽  
Thermal Perception ◽  
Accurate Design ◽  
Almost All ◽  
Autumn And Winter

A comprehensive assessment of indoor environmental conditions is performed on a representative sample of classrooms in schools across southern Spain (Mediterranean climate) to evaluate the thermal comfort level, thermal perception and preference, and the relationship with HVAC systems, with a comparison of seasons and personal clothing. Almost fifty classrooms were studied and around one thousand pool-surveys distributed among their occupants, aged 12 to 17. These measurements were performed during spring, autumn, and winter, considered the most representative periods of use for schools. A new proposed protocol has been developed for the collection and subsequent analysis of data, applying thermal comfort indicators and using the most frequent predictive models, rational (RTC) and adaptive (ATC), for comparison. Cooling is not provided in any of the rooms and natural ventilation is found in most of the spaces during midseasons. Despite the existence of a general heating service in almost all classrooms in the cold period, the use of mechanical ventilation is limited. Heating did not usually provide standard set-point temperatures. However, this did not lead to widespread complaints, as occupants perceive the thermal environment as neutral—varying greatly between users—and show a preference for slightly colder environments. Comparison of these thermal comfort votes and the thermal comfort indicators used showed a better fit of thermal preference over thermal sensation and more reliable results when using regional ATC indicators than the ASHRAE adaptive model. This highlights the significance of inhabitants’ actual thermal perception. These findings provide useful insight for a more accurate design of this type of building, as well as a suitable tool for the improvement of existing spaces, improving the conditions for both comfort and wellbeing in these spaces, as well as providing a better fit of energy use for actual comfort conditions.

scholarly journals Sensitivity Analysis of Occupant Preferences on Energy Usage in Residential Buildings

2021 ◽  
Author(s):  
Kaleb Pattawi ◽  
Prateek Munankarmi ◽  
Michael Blonsky ◽  
Jeff Maguire ◽  
Sivasathya Pradha Balamurugan ◽  
...  
Keyword(s):  
Sensitivity Analysis ◽  
Thermal Comfort ◽  
Residential Buildings ◽  
Electricity Consumption ◽  
Cost Savings ◽  
The United States ◽  
Comfort Level ◽  
Electrical Grid ◽  
Home Energy Management ◽  
The Impact

Abstract Residential buildings, accounting for 37% of the total electricity consumption in the United States, are suitable for demand response (DR) programs to support effective and economical operation of the power system. A home energy management system (HEMS) enables residential buildings to participate in such programs, but it is also important for HEMS to account for occupant preferences to ensure occupant satisfaction. For example, people who prefer a higher thermal comfort level are likely to consume more energy. In this study, we used foresee™, a HEMS developed by the National Renewable Energy Lab (NREL), to perform a sensitivity analysis of occupant preferences with the following objectives: minimize utility cost, minimize carbon footprint, and maximize thermal comfort. To incorporate the preferences into the HEMS, the SMARTER method was used to derive a set of weighting factors for each objective. We performed week-long building energy simulations using a model of a home in Fort Collins, Colorado, where there is mandatory time-of-use electricity rate structure. The foresee™ HEMS was used to control the home with six different sets of occupant preferences. The study shows that occupant preferences can have a significant impact on energy consumption and is important to consider when modeling residential buildings. Results show that the HEMS could achieve energy reduction ranging from 3% to 21%, cost savings ranging from 5% to 24%, and carbon emission reduction ranging from 3% to 21%, while also maintaining a low thermal discomfort level ranging from 0.78 K-hour to 6.47 K-hour in a one-week period during winter. These outcomes quantify the impact of varying occupant preferences and will be useful in controlling the electrical grid and developing HEMS solutions.

Numerical analysis of local thermal comfort in a plan office under natural ventilation

2019 ◽  
Vol 29 (7) ◽  
pp. 972-986 ◽  
Author(s):  
Xiang Deng ◽  
Zijing Tan
Keyword(s):  
Thermal Comfort ◽  
Natural Ventilation ◽  
Meteorological Data ◽  
Ventilation System ◽  
Comfort Level ◽  
Open Plan ◽  
Computational Fluid Dynamics Cfd ◽  
Internal Volume ◽  
Local Thermal Comfort ◽  
Primary Focus

The utilisation of automatic controlled natural wind in office buildings to maintain indoor thermal comfort has gained wide attention in recent years. Generally, it is not necessary to ensure that the whole internal volume of a building with large open spaces meets thermal comfort requirements. Primary focus should be on occupied areas. Accordingly, the local thermal comfort in an open-plan office with automatic controlled natural ventilation system was investigated numerically and experimentally. A computational fluid dynamics (CFD)-based method was presented for indoor environment and thermal comfort prediction. Long-term in situ measurement was conducted during summer and transition seasons. The meteorological data were collected by a mini weather station located on the roof of the target building. Meanwhile, indoor air velocity, temperature, turbulence intensity and wall temperatures were recorded locally. Three thermal comfort indices, i.e. thermal stratification represented by percentage dissatisfied (PD), the extended predicted mean vote (PMVe) and draught rate were employed to evaluate the thermal comfort level of the interested areas during natural ventilation period. The numerical results revealed a risk of local thermal dissatisfaction under low outdoor temperature and strong windy conditions.

scholarly journals Living quarters. A natural balanced ventilation system. Simulations part 1

2018 ◽  
Vol 49 ◽  
pp. 00025 ◽  
Author(s):  
Tomasz Gaczoł
Keyword(s):  
Natural Ventilation ◽  
Residential Buildings ◽  
Ventilation System ◽  
Comfort Level ◽  
Test Results ◽  
Pressure System ◽  
Ansys Fluent ◽  
Short Supply ◽  
Air Exchange Rate ◽  
Exhaust Duct

In the following article the author proposes the solution for a properly functioning natural ventilation system based on the use of supply and exhaust ducts, i.e. by designing a natural balanced ventilation system. The paper is devoted to test results of air flow through natural ventilation supply-exhaust ducts in the rooms located on the lower floor of the building. The simulations conducted in ANSYS Fluent software relate to such issues as: pressure system inside the room and in the exhaust duct, distribution of air temperatures in the room, vector direction of airflow through supplyexhaust ducts and in the analysed room. Three types of solutions were selected for the tests: air inflow into the room through the air intake located at the basement level, air inflow through the window ventilator (although no longer used, this solution can be found in many existing residential buildings) and the natural ventilation system supported with the so-called “solar chimney”. All simulations were conducted with an outdoor temperature of +3 degrees C. The indoor temperature is + 20 degrees C, considered to be the minimum thermal comfort level. In the era of common building sealing, the presented ventilation system may be a good solution that guarantees proper functioning of natural ventilation. In all cases presented, it meets the normative regulations and requirements for the ventilation air stream and the air exchange rate in the room. The paper (first part) describes test results concerning the room located on the lower floor of the building, i.e. with a short supply duct and a 12-meter long exhaust duct.

Climatic Strategies of Indoor Thermal Environment for Residential Buildings in Yangtze River Region, China

2011 ◽  
Vol 20 (1) ◽  
pp. 101-111 ◽  
Author(s):  
Baizhan Li ◽  
Wei Yu ◽  
Meng Liu ◽  
Nan Li
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Yangtze River ◽  
Air Conditioning ◽  
Natural Ventilation ◽  
Thermal Environment ◽  
Residential Buildings ◽  
Design Strategies ◽  
River Region ◽  
Climatic Adaptability

Yangtze River Valley is situated within the Hot Summer and Cold Winter zone, and residents in this region of China would require HVAC system to alleviate thermal comfort conditions, although this is tempered by the Design Code (DBJ50-071-2007) for energy efficiency. A 1-year survey of about 200 residential homes was carried out in eight cities covering the breadth of the region. The acceptable temperature range for the residents in this area was 16.3—28.1°C and the thermal neutral temperature was found to be 27.6°C in summers and 17.5°C in winters. People in different area can vary in their adaptability and comfortableness. Therefore, there is a need to investigate the national comfort parameter introduced in the Code for Design of Heating and Ventilation and Air Conditioning (GB50019-2003). The results found that if air-conditioning system was set to 27.5°C instead of 26°C as required by GBJ19-87: Design Standard of Heating and Ventilation and Air Conditioning, a 16.5% saving of energy consumption could be achieved. The findings demonstrated the role of natural ventilation in the expansion of the thermal comfort zone for the residents, especially during the summer seasons. A climatic adaptability model has been established by this study to contribute to the passive climatic design strategies for a better economic and energy efficiency of buildings.

scholarly journals Assessment of indoor thermal environment of Aceh house based on WBGT index

2021 ◽  
Vol 881 (1) ◽  
pp. 012023
Author(s):  
Muslimsyah ◽  
A Munir ◽  
Y Away ◽  
Abdullah ◽  
K Huda ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Natural Ventilation ◽  
Thermal Environment ◽  
Ventilation System ◽  
Vernacular Architecture ◽  
Maximum Temperature ◽  
Cooling Process ◽  
Temperature Index ◽  
Indoor Thermal Environment ◽  
Temperature Ranges

Abstract Thermal comfort is one of the standard assessments of building thermal environment. Air movement is an important parameter for in a naturally ventilated to achieve thermal comfort by accelerating the evaporative cooling process on the human body. Aceh House has a standard of thermal comfort with a vernacular architecture with a natural ventilation system. This vernacular architectural building has a fairly high harmonization of the environment because it has undergone a process of adaptation. In this study, observations were made at the Original House (OH), the Adaptive Reuse House (ARH), and the Aceh Modified House (AMH). By using the method of assessing changes in environmental comfort, using Wet Bulb Temperature Index (WBGT) method, the minimum and maximum temperature ranges are 25°C and 30°C. In the WBGT thermal rating, AMH has the higher thermal and is followed by ARH and OH respectively. Thus, OH has lower thermal compared to other Aceh houses.

Field Survey on Occupant Thermal Comfort of Cold Regions in Transition Season

2013 ◽  
Vol 805-806 ◽  
pp. 1620-1624 ◽  
Author(s):  
Wan Ying Qu
Keyword(s):  
Thermal Comfort ◽  
Air Temperature ◽  
Indoor Air ◽  
Field Survey ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Residential Buildings ◽  
Cold Regions ◽  
Indoor Thermal Environment ◽  
Transition Season

A thermal comfort field study was investigated in residential buildings of cold regions in transition season during which the indoor thermal environment conditions are measured, the thermal sensation value of the occupants is questioned and recorded. A seven-point thermal sensation scale was used to evaluate the thermal sensation. The statistical method was used to analyze the data and the conclusions are as follows in transition season: clothing increase in 0.1clo when the indoor air temperature is lowered by 1°C; and clothing will be a corresponding increase in 0.06clo when the outdoor air temperature is lowered by 1°C; clothing also varies with gender, age, weight and thermal history and other related; the measured thermal neutral temperature is 21.3°C; and the minimum accepted temperature is 11.4 °C in transition season in cold regions. Most people choose to change clothes, switch and other passive measures, and occasionally take active measures of heater, electric fans and others.

scholarly journals Impact of ventilation system type on indoor thermal environment and human thermal comfort in a ceiling cooling room

2021 ◽  
pp. 277-277
Author(s):  
Xiaozhou Wu ◽  
Genglin Liu ◽  
Jie Gao ◽  
Shuang Wu
Keyword(s):  
Thermal Comfort ◽  
Air Temperature ◽  
Thermal Environment ◽  
Thermal Sensation ◽  
Ventilation System ◽  
Physical Parameters ◽  
Curtain Wall ◽  
Indoor Thermal Environment ◽  
Human Thermal Comfort ◽  
System Type

A ceiling cooling (CC) system integrated with a mechanical ventilation system is an advanced HVAC system for the modern office building with glass curtain wall. In this paper, considering the influence of heat transfer of external envelope, the indoor thermal environment and human thermal comfort were objectively measured and subjectively evaluated in a ceiling cooling room with mixing ventilation (MV) or underfloor air distribution (UFAD). Indoor physical parameters and human skin temperatures were measured as the chilled ceiling surface temperature and supply air temperature were 17.1?C-17.6?C and 22.2?C - 22.6?C. Simultaneously, 16 subjects (8 males and 8 females) were selected to subjectively evaluate the thermal environment. The results showed that the difference between mean radiant temperature and air temperature in the occupied zone was 0.8?C with CC+MV and 1.2?C with CC+UFAD, and the indoor air velocity was 0.17m/s with CC+MV and 0.13m/s with CC+UFAD. In addition, the calculated and measured thermal sensation votes with CC+MV were all slightly less than those with CC+UFAD. Therefore, ventilation system type had a slight impact on the indoor thermal environment and human thermal comfort in the ceiling cooling room.

scholarly journals Investigation of Ventilation Behaviors in Mechanically Ventilated Residential Buildings in China

2019 ◽  
Vol 111 ◽  
pp. 06048
Author(s):  
Yue Qi ◽  
Junjie Liu ◽  
Xilei Dai ◽  
Lei Zhao ◽  
Dayi Lai ◽  
...  
Keyword(s):  
Mechanical Ventilation ◽  
Energy Efficient ◽  
Natural Ventilation ◽  
Residential Buildings ◽  
Ventilation System ◽  
Outdoor Air ◽  
Climate Zones ◽  
Mechanically Ventilated ◽  
Ventilation Duration ◽  
Site Monitoring

Mechanical ventilation system provides a more reliable, controllable, and comfortable way of ventilation than natural ventilation through an opened window. However, the operation of mechanical ventilation system cost energy. This study investigated the usage of natural and mechanical ventilation in 46 apartments in ten cities across five different climate zones in China by on-site monitoring and questionnaire survey. On average, the daily natural and mechanical ventilation durations were 11 hours and 7.2 hours, respectively. Large differences existed among climate regions and seasons. From north to south, as the climate became warmer, the usage of natural ventilation increased. From seasonal perspectives, natural ventilation duration was the longest in summer and the shortest in winter. The trend of mechanical ventilation usage was opposite to that of natural ventilation. Generally, as the outdoor air temperature increased, the duration of natural ventilation increased and the duration of mechanical ventilation decreased. This study proposed an outline to use thermal comfort, health, and energy saving as three motivations to analyze ventilation behaviors. Based on the obtained results, suggestions were made for achieving healthy, thermally comfortable, and energy efficient ventilation in residential buildings.

Sign in / Sign up

Export Citation Format

Share Document