scholarly journals Formulation and evaluation of atorvastatin calcium niosomes

2021 ◽  
Vol 2 (1) ◽  
pp. 116-126
Author(s):  
Neha Rani ◽  
Rupali Rana ◽  
Reena Thakur ◽  
Shivali Singla ◽  
Sachin Goyal
Keyword(s):  
Drug Delivery ◽  
Oral Bioavailability ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Drug Carriers ◽  
Tween 20 ◽  
Atorvastatin Calcium ◽  
Span 60

Atorvastatin calcium is a HMG-CoA reductase inhibitor used for the treatment of hyperlipidaemia. It has oral bioavailability of ≤12 %. It also undergoes high first pass metabolism. It is highly soluble in acidic pH and absorbed more in the upper part of the gastrointestinal tract. In order, to improve the absorption and its oral bioavailability, niosomes of Atorvastatin calcium have been formulated and evaluated on different parameters. Niosomes play an increasingly important role in drug delivery as they can reduce toxicity and 000000000modify pharmacokinetic and bio-availability. Niosomes formulations of Atorvastatin calcium were successfully developed by thin film hydration technique using nonionic surfactant i.e. Span 40, Span 60 Span 80, Tween 20, Tween 40, Tween 80 and cholesterol at different concentrations. The formulations were evaluated for size, shape, and entrapment efficiency. In-vitro release and stability studies also performed. Results indicated that Niosomes were prepared succesfully work as promising drug carriers and promising drug delivery module.

scholarly journals Formulation, characterization, evaluation and in vitro study of transfersomal gel medroxyprogesterone acetate for transdermal drug delivery

2020 ◽  
Vol 11 (4) ◽  
pp. 5373-5381
Author(s):  
Iskandarsyah ◽  
Camelia Dwi Putri Masrijal ◽  
Harmita
Keyword(s):  
Drug Delivery ◽  
Medroxyprogesterone Acetate ◽  
Transdermal Drug Delivery ◽  
High Performance ◽  
Hormonal Contraception ◽  
In Vitro Study ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Reversed Phase

A hormonal contraception progestin such as medroxyprogesterone acetate (MPA) is used to helps regulate ovulation thus as a part of contraception hormone therapy as a method of birth control. This study aimed to formulate, characterized, evaluated transfersomal gel containing medroxyprogesterone acetate and to increased subcutaneous penetration of medroxyprogesterone acetate. In this research, three transfersomes formulas were prepared and optimized, e.g. F1, F2 and F3 with phosphatidylcholine: tween 80 concentration were 90:10; 85:15; and 75:25, respectively. F2 was the best formula with the highest entrapment efficiency 81.20±0.42 %, Average 81.35 ±0.78 nm, morphology of vesicles were spheres, indeks polidispersity 0.198±0.012 and zeta potential was -34.83±0.64 mV. The transpersonal gel (FGT) containing F2, and non-transpersonal gel containing MPA in methanol(FG) were prepared. In vitro penetration test were conducted to both of them using Franz Diffusion cells. Analysis of medroxyprogesterone acetate used a high performance liquid chromatographic (HPLC) method with an ultraviolet detector on reversed-phase C18, 5µm; 150 x 4.6 mmcolumn; using acetonitrile-0.1% formic acid (60:40/v:v) and was detected at a wavelength of 240 nm with flow rate at 1.0 mL/min. Gel stability evaluation results showed that FGT was better than FG on pH stability, viscosity and rheological properties. Based on in vitro penetration study, cumulative subcutaneous penetration of medroxyprogesterone acetate from FGT was 2356.45 ± 197.73 ng.cm-2 and from FG 359.15 ± 13.60 ng.cm-2, respectively. Flux value for FGT and FG were 112.77 ± 6,47 ng.cm-2.hr-1and 17.99 ± 4.81 ng.cm-2.hr-1, respectively. It could be concluded that transfersomal gel medroxyprogesterone acetate for transdermal drug delivery increased cumulative transdermal penetration of medroxyprogesterone acetate by six times more than non-transfersomal gel dosage form.

scholarly journals SELF-NANO EMULSIFYING DRUG DELIVERY SYSTEM OF EFAVIRENZ: FORMULATION, IN VITRO EVALUATION AND CHARACTERIZATION

2019 ◽  
pp. 217-226
Author(s):  
PAMU SANDHYA
Keyword(s):  
Drug Delivery ◽  
Dissolution Rate ◽  
Drug Delivery System ◽  
Delivery System ◽  
In Vitro Release ◽  
Visual Observation ◽  
Stability Study ◽  
In Vitro Dissolution ◽  
Tween 20

Objective: The main objective of this study was to preparation and evaluation of efavirenz (EFV) to enhance its solubility and dissolution rate by self-emulsifying drug delivery system. Methods: EFV self-emulsifying drug delivery systems (SNEDDS) were formulated using different oils, surfactant, and co-surfactant. Peceol, Tween 20, and Capmul MCM were used as oil, surfactant, and co-surfactant, respectively, followed by the evaluation by the performance of different tests such as visual observation, solubility studies, thermodynamic stability study, transmittance studies, drug content, and in-vitro release study. Results: Fourier-transform infrared studies revealed negligible drug and polymer interaction. From the phase diagram, it was observed that self-emulsifying region was enhanced with increasing surfactant and co-surfactant concentrations with oil. F13 was selected as optimized formulation on the basis of physicochemical parameters, particle size, and in-vitro dissolution studies with the release of 98.39±5.10% drug in 1 hour. The optimized formulation size was found to be 156.7 nm as mean droplet size and Z-Average of 808.6 nm with -18.3 mV as zeta potential. Conclusion: The study demonstrated that SNEDDS was a promising strategy to enhance the dissolution rate of EFV by improving solubility.

scholarly journals ENHANCEMENT OF DISSOLUTION CHARACTERISTICS OF CLOPIDOGREL BISULPHATE BY PRONIOSOMES

2019 ◽  
pp. 77-85 ◽  
Author(s):  
EMAN A. MAZYED ◽  
SHERIN ZAKARIA
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
International Normalized Ratio ◽  
Angle Of Repose ◽  
Morphological Examination ◽  
Span 60

Objective: The present investigation aims to formulate and evaluate proniosomes of clopidogrel bisulphate for improving its dissolution characteristics. Methods: The slurry method was used for the preparation of proniosomes of clopidogrel using cholesterol, sorbitan monostearate (Span 60) and maltodextrin as a carrier. Clopidogrel proniosomes were evaluated for their entrapment efficiency and in vitro drug release. The best formula (F1) that achieved maximum drug release was further evaluated by measurement of the angle of repose, morphological examination, determination of vesicle size, determination of zeta potential, Fourier transform infrared spectroscopy and differential thermal analysis. The in vivo behavior of the selected proniosomal formula (F1) was studied by measuring the antiplatelet activity in adult male mice. Results: The entrapment efficiency of clopidogrel proniosomes was in the range of 83.04±1.99 to 90.14±0.30. % drug released from proniosomal formulations was in the range of 79.73±0.35 to 97.70±1.10 % within 4 h. Clopidogrel proniosomes significantly enhanced the in vitro release of clopidogrel compared with the plain drug that achieved 61.77±2.22 % drug release. F1 significantly (p ≤ 0.001) increased the bleeding time and bleeding volume and significantly (p ≤ 0.05) prolonged prothrombin time and decreased prothrombin activity and increased the international normalized ratio (INR) compared to plain clopidogrel. Conclusion: The present investigation introduced proniosomes as a promising carrier for clopidogrel that could enhance its dissolution and pharmacological effect.

scholarly journals Fabrication of Transgelosomes for Enhancing the Ocular Delivery of Acetazolamide: Statistical Optimization, In Vitro Characterization, and In Vivo Study

Pharmaceutics ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 465 ◽  
Author(s):  
Eman A. Mazyed ◽  
Abdelaziz E. Abdelaziz
Keyword(s):  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Ocular Delivery ◽  
Ethanol Injection ◽  
In Vitro Characterization ◽  
Span 60 ◽  
In Vivo Characterization

Acetazolamide (ACZ) is a potent carbonic anhydrase inhibitor that is used for the treatment of glaucoma. Its oral administration causes various undesirable side effects. This study aimed to formulate transgelosomes (TGS) for enhancing the ocular delivery of ACZ. ACZ-loaded transfersomes were formulated by the ethanol injection method, using phosphatidylcholine (PC) and different edge activators, including Tween 80, Span 60, and Cremophor RH 40. The effects of the ratio of lipid to surfactant and type of surfactant on % drug released after 8 h (Q8h) and entrapment efficiency (EE%) were investigated by using Design-Expert software. The optimized formula was formulated as TGS, using poloxamers as gelling agents. In vitro and in vivo characterization of ACZ-loaded TGS was performed. According to optimization study, F8 had the highest desirability value and was chosen as the optimized formula for preparing TGS. F8 appeared as spherical elastic nanovesicles with Q8h of 93.01 ± 3.76% and EE% of 84.44 ± 2.82. Compared to a free drug, TGS exhibited more prolonged drug release of 71.28 ± 0.46% after 8 h, higher ex vivo permeation of 66.82 ± 1.11% after 8 h and a significant lowering of intraocular pressure (IOP) for 24 h. Therefore, TGS provided a promising technique for improving the corneal delivery of ACZ.

scholarly journals Self-Assembled Casein Nanoparticles Loading Triptolide for the Enhancement of Oral Bioavailability

2020 ◽  
Vol 15 (8) ◽  
pp. 1934578X2094835
Author(s):  
Chengxia Liu ◽  
Ting-ting Jiang ◽  
Zhi-xiang Yuan ◽  
Yu Lu
Keyword(s):  
Self Assembly ◽  
Oral Bioavailability ◽  
In Vitro Release ◽  
Area Under The Curve ◽  
Entrapment Efficiency ◽  
Infrared Spectrometry ◽  
Scanning Calorimetry ◽  
Insoluble Drugs

Triptolide (TP), a broad-spectrum antitumor drug, has very poor solubility and oral bioavailability, which limits its clinical use. Compared with conventional formulations of TP, a casein (Cas)-based drug delivery system has been reported to have significant advantages for the improvement of solubility and bioavailability of insoluble drugs. In this paper, we report the successful preparation of TP-loaded Cas nanoparticles (TP-Cas) using the self-assembly characteristics of Cas in water and the optimization of the formulation by evaluation of entrapment efficiency (EE) and loading efficiency (LE). Dynamic light scattering, transmission electron microscopy, Fourier-transform infrared spectrometry, X-ray diffractometry (XRD), and differential scanning calorimetry (DSC) was adopted to characterize the TP-Cas. Results showed that the obtained TP-Cas were approximately spherical with a particle size of 128.7 ± 11.5 nm, EE of 72.7 ± 4.7 %, and LE of 8.0% ± 0.5%. Furthermore, in vitro release behavior of TP-Cas in PBS (pH = 7.4) was also evaluated, showing a sustained-release profile. Additionally, an in vivo study in rats displayed that the mean plasma concentration of TP after oral administration of TP-Cas was significantly higher than that treated with TP oral suspension. The C max value for TP-Cas (8.0 ± 4.4 μg/mL) was significantly increased compared with the free TP (0.9 ± 0.3 μg/mL). Accordingly, the area under the curve (AUC0-8) of TP-Cas was 2.8 ± 0.8 mg/L·h, 4.3-fold higher than that of TP suspension (0.6 ± 0.1 mg/L·h). Therefore, it can be concluded that TP-Cas enhanced the absorption and improved oral bioavailability of TP. Taking the good oral safety of Cas into consideration, TP-Cas should be a more promising preparation of TP for clinical application.

Effect of Surfactants on Characteristic and In Vitro Release of Meloxicam Loaded in Deformable Liposomes

2012 ◽  
Vol 506 ◽  
pp. 457-460
Author(s):  
Sureewan Duangjit ◽  
Praneet Opanasopit ◽  
Theerasak Rojanarata ◽  
Tanasait Ngawhirunpat
Keyword(s):  
Drug Delivery ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Sodium Cholate ◽  
Drug Delivery Carrier ◽  
Release Study ◽  
Water Insoluble Drug ◽  
Vitro Release ◽  
Potential Use

The aim of this study was to investigate the effect of surfactants on characteristic and in vitro release of liposomes containing meloxicam (MX), model of water insoluble drug. The potential use of deformable liposomes for drug delivery system was developed and investigated. The formulation composed of constant amount of phosphatidylcholine (PC) and MX and various amounts of cholesterol (Chol), sodium cholate (NaChol), sodium oleate (NaO) and stearylamine (SA) was formulated by reverse phase evaporation method. The vesicle size, zeta potential, morphology, entrapment efficiency, loading efficiency, stability andin vitrorelease study were evaluated. The result indicated that the entrapment efficiency andin vitrorelease study of vesicle formulations containing surfactants were significantly higher than the conventional liposome and MX suspension. The formulation of 10:2:2:5 PC/MX/Chol/NaO provided the maximum entrapment efficiency and drug release. Our research suggested that MX loaded in deformable liposomes containing surfactants can be potentially used as a drug delivery carrier for water insoluble drug.

Fabrication of Vesicular Drug Delivery of Niosomal Topical Formulation for the Effective Treatment of Osteoarthritis

2016 ◽  
Vol 12 ◽  
pp. 1-8
Author(s):  
S. Nagalakshmi ◽  
T. Sandeep ◽  
S. Shanmuganathan
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Methyl Cellulose ◽  
Entrapment Efficiency ◽  
Lipid Vesicles ◽  
Tween 20 ◽  
Injection Method ◽  
Topical Gel ◽  
Release Studies

Delivery of drug through topical route, delivers most convenient and novel approach. The Skin can offer several advantages as a route of drug administration although its barrier nature makes it difficult for most drugs to penetrate in to and permeate through it. During the past decades there has been a lot of interest in lipid vesicles as a tool to improve topical drug delivery. Vesicular system such as liposomes, niosomes, ethosomes and elastic deformable vesicles provide an alternative for improved skin drug delivery. In fact vesicles can act as drug carriers controlling drug release. The Research findings were intended to develop sustained release of aceclofenac niosomes formulations in order to reduce gastrointestinal disturbances and to provide better effect when applied topically. Niosomes of aceclofenac was prepared by modified ether injection method using different ratio of surfactants (Tween 20, 40, 60 & 80) with cholesterol and drug. The developed formulations were optimized based on the high entrapment efficiency and in-vitro release studies. Optimized batch was selected and made in to topical niosomal gel using gelling agents like carbopol and sodium carboxy methyl cellulose. Formulation were evaluated for various parameters like vesicle shape, vesicle size, entrapment efficiency, drug content, compatibility studies, in-vitro release studies and stability studies. Ether injection method was found to be most satisfactory in terms of niosome particle size, drug entrapment efficiency was found to be 88.68 ±0.64 % and in-vitro release studies showed 40% of sustain drug release at the end of 8 hrs of study when compared with marketed formulation. Hence, the formulated niosomal topical gel was found to be a better alternative when compared to the marketed formulation in terms of better efficacy, bioavailability and permeation.

scholarly journals FLUCONAZOLE NANOGEL: FABRICATION AND IN VITRO EVALUATION FOR TOPICAL APPLICATION

2021 ◽  
pp. 272-277
Author(s):  
DIVYA ◽  
INDERBIR SINGH ◽  
UPENDRA NAGAICH
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Release Kinetics ◽  
Seborrheic Dermatitis ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Tween 80 ◽  
Flow Index ◽  
In Vitro Evaluation

Objective: The aim of this study is to develop and in vitro evaluation of prepared fluconazole nanogel for seborrheic dermatitis Methods: Fluconazole nanogel was formulated to act against seborrheic dermatitis. The fluconazole nanoparticles were prepared by a simplified evaporation method and evaluated for particle size, entrapment efficiency, and percent in vitro drug release. The nanogel was also characterized based on parameters like particle size, percent entrapment efficiency, shape surface morphology, rheological properties, in vitro release R² = 0.9046, and release kinetics. Results: The nanoparticle with a combination of Eudragit RS and Tween 80 showed the best result with particle size in the range of 119.0 nm to 149.5 nm, with a cumulative percent drug release of 95 % up to 18 h. The formulated nanogel with optimum concentration of HPMC authenticate with particle size 149.50±0.5 with maximum drug release (92.13±0.32) %. Conclusion: Different percentages of polymers (ethyl-cellulose, eudragit, and tween 80) are used as variable components in the formulation of nanogel. The optimized batch showed good physical properties (flow index, spreadability, and viscosity) along with rapid drug release. Therefore, it can be concluded that nanogel containing fluconazole has potential application in topical delivery.

Formulation and evaluation of resveratrol loaded cubosomal nanoformulation for topical delivery

2020 ◽  
Vol 17 ◽  
Author(s):  
Bhaskar Kurangi ◽  
Sunil Jalalpure ◽  
Satveer Jagwani
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Topical Application ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Drug Permeation

Aim: The aim of the study was to formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC) through topical application. Background: Resveratrol (RV) is a nutraceutical compound that has exciting pharmacological potential in different diseases including cancers. Many studies of resveratrol have been reported for anti-melanoma activity. Due to its low bioavailability, the activities of resveratrol are strongly limited. Hence, an approach with nanotechnology has been done to increase its activity through transdermal drug delivery. Objective: To formulate, characterize, and evaluate the resveratrol-loaded cubosomes (RC). To evaluate resveratrol-loaded cubosomal gel (RC-Gel) for its topical application. Methods: RC was formulated by homogenization technique and optimized using a 2-factor 3-level factorial design. Formulated RCs were characterized for particle size, zeta potential, and entrapment efficiency. Optimized RC was evaluated for in vitro release and stability study. Optimized RC was further formulated into cubosomal gel (RC-Gel) using carbopol and evaluated for drug permeation and deposition. Furthermore, developed RC-Gel was evaluated for its topical application using skin irritancy, toxicity, and in vivo local bioavailability studies. Results: The optimized RC indicated cubic-shaped structure with mean particle size, entrapment efficiency, and zeta potential were 113±2.36 nm, 85.07 ± 0.91%, and -27.40 ± 1.40 mV respectively. In vitro drug release of optimized RC demonstrated biphasic drug release with the diffusion-controlled release of resveratrol (RV) (87.20 ± 2.25%). The RC-Gel demonstrated better drug permeation and deposition in mice skin layers. The composition of RC-Gel has been proved non-irritant to the mice skin. In vivo local bioavailability study depicted the good potential of RC-Gel for skin localization. Conclusion: The RC nanoformulation proposes a promising drug delivery system for melanoma treatment simply through topical application.

Sign in / Sign up

Export Citation Format

Share Document