scholarly journals Removal of cationic dye (basic red 18) from aqueous solution using natural turkish clay

2013 ◽  
Vol 15 (4) ◽  
pp. 529-541 ◽  
Keyword(s):  
Experimental Data ◽  
Ionic Strength ◽  
Initial Conditions ◽  
Kinetic Equations ◽  
Agitation Speed ◽  
Second Order ◽  
Order Kinetic ◽  
Cationic Dye ◽  
Adsorbent Dosage ◽  
Pseudo Second Order

<p>In this study, the removal of a cationic dye, basic red 18, used in the textile industry with montmorillonite was investigated as a function of initial dye concentration, pH, agitation speed, adsorbent dosage, ionic strength, and temperature. Adsorption process was attained to the equilibrium within 30 minutes. The adsorption capacity of basic red 18 increased with increasing ionic strength, initial dye concentration, pH, agitation speed, and temperature, but decreased with increasing adsorbent dosage. The experimental data were analyzed by Langmuir, Freundlich, Temkin, Elovich and Dubinin-Radushkevich isotherms, and it was found that the isotherm data were reasonably correlated by Freundlich isotherm. Pseudo-first order, pseudo-second order, Elovich kinetic equations and intraparticle diffusion model were used to examine the experimental data of different initial conditions. It was found that the pseudo-second order kinetic equation described the data of dye adsorption onto montmorillonite very well. Furthermore, for the removal of basic red 18, a semi-empirical model was established. Thermodynamic analysis was carried out for basic red 18 onto montmorillonite. It was found that the adsorption processes were endothermic in nature. The values of Ea, ΔH*, ΔS* and ΔG* at 293 K for basic red 18 adsorption on clay were calculated as 27.635 kJ mol-1, 25.041kJ mol-1, -0.090 kJ mol-1 K-1 and 51.412 kJ mol-1, respectively. The results indicated that montmorillonite could be employed as an alternative to commercial adsorbents in wastewater treatment for the removal of color and dyes.</p>

scholarly journals Removal of Basic Orange 2 dye and Ni2+ from aqueous solutions using alkaline-modified nanoclay

2021 ◽  
Author(s):  
Armin Geroeeyan ◽  
Ali Niazi ◽  
Elaheh Konoz
Keyword(s):  
Experimental Data ◽  
High Efficiency ◽  
Adsorption Process ◽  
Kinetic Equations ◽  
Dye Adsorption ◽  
Second Order ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Diffusion Kinetic ◽  
Pseudo Second Order

Abstract In the present research, the removal of Basic Orange 2 (BO2) dye using alkaline-modified clay nanoparticles was studied. To characterize the adsorbent, XRD, FTIR, FESEM, EDX, BET and BJH analyses were performed. The effect of the variables influencing the dye adsorption process such as adsorbent dose, contact time, pH, stirring rate, temperature, and initial dye concentration was investigated. Furthermore, the high efficiency of Ni2+ removal indicated that it is possible to remove both dye and metal cation under the same optimum conditions. The experimental data were analyzed by Langmuir and Freundlich isotherm models. Fitting the experimental data to Langmuir isotherm indicated that the monolayer adsorption of dye occurred at homogeneous sites. Experimental data were also analyzed with pseudo-first-order, pseudo-second-order, and intra-particle diffusion kinetic equations for kinetic modeling of the dye removal process. The adsorption results indicated that the process follows a pseudo-second-order kinetic model. The thermodynamic parameters of the dye adsorption process such as enthalpy, entropy, and Gibbs free energy changes were calculated and revealed that the adsorption process was spontaneous and endothermic in nature. The results presented the high potential of the modified nanoclay as a cost-effective adsorbent for the removal of BO2 dye and Ni2+ from aqueous medium.

scholarly journals Removal of Malachite Green from Aqueous Solution by Activated Carbon Developed from Cocoa (Theobroma Cacao) Shell - A Kinetic and Equilibrium Studies

2011 ◽  
Vol 8 (s1) ◽  
pp. S363-S371 ◽  
Author(s):  
C. Theivarasu ◽  
S. Mylsamy
Keyword(s):  
Experimental Data ◽  
Activated Carbon ◽  
Malachite Green ◽  
Kinetic Models ◽  
Theobroma Cacao ◽  
Second Order ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Initial Ph ◽  
Pseudo Second Order

The removal of malachite green (MG) by cocoa (Theobroma cacao) shell activated carbon (CSAC) was investigated in present study. Adsorption studies were performed by batch experiments as a function of process parameters such as initial pH, contact time, initial concentration and adsorbent dose. A comparison of kinetic models applied to the adsorption of MG on CSAC was evaluated for the pseudo-first order and pseudo-second order kinetic models. Results showed that the pseudo-second order kinetic model was found to correlate the experimental data well. The experimental equilibrium adsorption data was represented with Langmuir, Freundlich, Tempkin, Dubinin-Radushkevich and Flory-Huggins isotherms. The experimental data obtained in the present study indicated that activated carbon developed from cocoa shell can be attractive options for dye removal from waste water.

The sorption of lead, cadmium, copper and zinc ions from aqueous solutions on a raw diatomite from Algeria

2012 ◽  
Vol 65 (10) ◽  
pp. 1729-1737 ◽  
Author(s):  
Messaouda Safa ◽  
Mohammed Larouci ◽  
Boumediene Meddah ◽  
Pierre Valemens
Keyword(s):  
Metal Ions ◽  
Low Cost ◽  
Kinetic Equations ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Reaction Conditions ◽  
Freundlich Isotherms ◽  
Pseudo Second Order ◽  
Sorption Parameters

The adsorption of Cu2+, Zn2+, Cd2+ and Pb2+ ions from aqueous solution by Algerian raw diatomite was studied. The influences of different sorption parameters such as contact pH solution, contact time and initial metal ions concentration were studied to optimize the reaction conditions. The metals ions adsorption was strictly pH dependent. The maximum adsorption capacities towards Cu2+, Zn2+, Cd2+ and Pb2+ were 0.319, 0.311, 0.18 and 0.096 mmol g−1, respectively. The kinetic data were modelled using the pseudo-first-order and pseudo-second-order kinetic equations. Among the kinetic models studied, the pseudo-second-order equation was the best applicable model to describe the sorption process. Equilibrium isotherm data were analysed using the Langmuir and the Freundlich isotherms; the results showed that the adsorption equilibrium was well described by both model isotherms. The negative value of free energy change ΔG indicates feasible and spontaneous adsorption of four metal ions on raw diatomite. According to these results, the high exchange capacities of different metal ions at high and low concentration levels, and given the low cost of the investigated adsorbent in this work, Algerian diatomite was considered to be an excellent adsorbent.

On the use of linearized pseudo-second-order kinetic equations for modeling adsorption systems

Desalination ◽  
2010 ◽  
Vol 257 (1-3) ◽  
pp. 93-101 ◽  
Author(s):  
Mohammad I. El-Khaiary ◽  
Gihan F. Malash ◽  
Yuh-Shan Ho
Keyword(s):  
Kinetic Equations ◽  
Second Order ◽  
Order Kinetic ◽  
Pseudo Second Order ◽  
Adsorption Systems

scholarly journals Banana Fibers as Sorbent for Removal of Acid Green Dye from Water

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Siti Kartina Abdul Karim ◽  
Soh Fong Lim ◽  
S. N. David Chua ◽  
Shanti Faridah Salleh ◽  
Puong Ling Law
Keyword(s):  
Freundlich Isotherm ◽  
Sorption Process ◽  
Agitation Speed ◽  
Second Order ◽  
Order Kinetic ◽  
Solution Ph ◽  
Banana Fiber ◽  
Banana Fibers ◽  
Pseudo Second Order ◽  
Banana Leaves

In this study, banana fibers extracted from banana leaves, stem, and stalk were used to remove acid green dye from aqueous solution. Three initial concentrations (750, 1000, and 1500 ppm) were chosen to determine the kinetic characteristics of the banana fiber sorbents at 25°C, agitation speed of 200 rpm, and total contact time of 3 hours. The pseudo-first-order, pseudo-second-order, and Dunwald-Wagner kinetic models were applied to the experimental kinetic data. For isotherm study, the batch experiments were performed at 25°C, initial pH 2, agitation speed of 200 rpm, and initial concentrations between 100 and 2000 ppm. The experimental data was fitted to the Langmuir, Freundlich, Dubinin-Radushkevich, and Temkin isotherms. The equilibrium was achieved in less than 90 minutes. The removal of the acid green dye was found to be following closely the pseudo-second-order kinetic model. For equilibrium study, the Freundlich isotherm was found to fit well with adsorption of acid green dye on the banana leaves, stem, and stalk sorbents. The calculated mean free energy of 4–11 J/mol indicated that the sorption process was mostly physical in nature. Experimental results also showed the adsorption performance is greatly affected by the initial solution pH.

scholarly journals Cadmium(II) Removal from Aqueous Solution Using Microporous Eggshell: Kinetic and Equilibrium Studies

2018 ◽  
Vol 18 (2) ◽  
pp. 265 ◽  
Author(s):  
Behzad Shamsi Zadeh ◽  
Hossein Esmaeili ◽  
Rauf Foroutan
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
High Efficiency ◽  
Second Order ◽  
Order Kinetic ◽  
Mixing Rate ◽  
Equilibrium Studies ◽  
Initial Concentration ◽  
Adsorbent Dosage ◽  
Pseudo Second Order

Heavy metals are soluble in the environment and can be dangerous for many species. So, removal of heavy metals from the water and wastewater is an important process. In this study, an adsorbent made of eggshell powder was employed to remove cadmium ions from aqueous solution. A number of parameters were studied including pH of the aqueous solution, adsorbent dosage, contact time, the initial concentration of cadmium ion and mixing rate. The best efficiency for the removal of Cd(II) was obtained 96% using this adsorbent. The optimal parameters were ambient temperature of 30 °C, mixing rate of 200 rpm, pH of 9, an adsorbent dosage of 5 g/L and initial concentration of cadmium was 200 ppm. In order to study the kinetics of adsorbent, the pseudo-first-order and pseudo-second-order kinetic models and intra-particle diffusion model were applied. According to the pre-determined correlation coefficients (R2), the pseudo-second-order kinetic model showed a better correlation between the kinetic behaviors of the adsorbent. Furthermore, to study the equilibrium behavior of adsorbent, Langmuir and Freundlich models used and both models showed high efficiency in isotherm behavior of the adsorbent. So, this adsorbent can be used as a natural and cheap adsorbent.

scholarly journals Prediction of adsorption efficiency for the removal malachite green and acid blue 161 dyes by marble sludge dust using ANN

2014 ◽  
Vol 16 (4) ◽  
pp. 676-689 ◽  
Keyword(s):  
Experimental Data ◽  
Malachite Green ◽  
Second Order ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Ann Model ◽  
Marble Dust ◽  
Pseudo Second Order ◽  
Acid Blue

<div> <p>In the present study, batch adsorption studies were performed for the removal of malachite green and acid blue 161 dyes from aqueous solutions by varying parameters such as contact time, waste marble dust amount, initial dye concentration and temperature. The equilibrium adsorption data were analyzed by Langmuir, Freundlich and Temkin adsorption isotherm models. The Langmuir and Freundlich adsorption models agree well with experimental data. The pseudo-second order, intraparticle intraparticle diffusion and Elovich kinetic models were applied to the experimental data in order to describe the removal mechanism of dye ions by waste marble dust. The pseudo-second order kinetic was the best fit kinetic model for the experimental data. Thermodynamics parameters such as Δ<em>G</em>, Δ<em>H</em> and Δ<em>S </em>were also calculated for the adsorption processes. The experimental data were used to construct an artificial neural network (ANN) model to predict removal of malachite green and acid blue 161 dyes by waste marble dust. A three-layer ANN, an input layer with four neurons, a hidden layer with 12 neurons, and an output layer with one neuron is constructed. Different training algorithms were tested on the model to obtain the proper weights and bias values for ANN model. The results show that waste marble dust is an efficient sorbent for malachite green dye and ANN network, which is easy to implement and is able to model the batch experimental system.</p> </div> <p>&nbsp;</p>

scholarly journals Polyvinyl Alcohol/Calcium Carbonate Nanocomposites as Efficient and Cost-Effective Cationic Dye Adsorbents

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2179
Author(s):  
Davoud Jahani ◽  
Amin Nazari ◽  
Jaber Ghourbanpour ◽  
Amir Ameli
Keyword(s):  
Calcium Carbonate ◽  
Polyvinyl Alcohol ◽  
Adsorption Kinetics ◽  
Dye Removal ◽  
Dye Adsorption ◽  
Second Order ◽  
Order Kinetic ◽  
Cationic Dye ◽  
Intraparticle Diffusion Model ◽  
Pseudo Second Order

A novel polyvinyl alcohol (PVA)/calcium carbonate-based double-layer cationic dye adsorbent was developed. Polyvinyl alcohol (50 wt %) and calcium carbonate (50 wt %) were used together with borax as a cross-linking agent. The nanocomposite was prepared using only water, without the need for any toxic solvent or hazardous chemical. The final samples were obtained by the solvent casting method. The nanocomposite adsorbent was characterized using a Fourier transform infrared (FTIR) spectroscope and a scanning electron microscope (SEM). The adsorption performance on two cationic dyes, i.e., methylene blue and safranin was studied. Dye adsorption was quantified by measuring the nanocomposite swelling, contact time, and dye concentration. Pseudo first-order and pseudo second-order kinetic models as well as intraparticle diffusion model were used to model the adsorption kinetics. Moreover, the isotherm dye adsorption was investigated by Langmuir and Freundlich models. The results revealed that the developed nanocomposite has relatively high adsorption efficiency and short adsorption time and retains its performance after several successive absorption–desorption processes. The results also showed that the pseudo-second-order model best describes the adsorption kinetics, and the Freundlich isotherm model has a better compatibility with the experimental data. Finally, an adsorption mechanism was proposed for the dye removal process. The developed PVA/CaCO3 nanocomposite can be potentially used for efficient dye removal in wastewater treatments.

scholarly journals Mass-transfer processes in the adsorption of crystal violet by activated carbon derived from pomegranate peels: Kinetics and thermodynamic studies

2020 ◽  
Vol 15 ◽  
pp. 155892502091984
Author(s):  
Moussa Abbas ◽  
Zahia Harrache ◽  
Mohamed Trari
Keyword(s):  
Activated Carbon ◽  
Adsorption Capacity ◽  
Crystal Violet ◽  
Agitation Speed ◽  
Second Order ◽  
Point Of Zero Charge ◽  
Order Kinetic ◽  
Solution Ph ◽  
Pseudo Second Order ◽  
Adsorbent Dose

This study investigates the potential use of activated carbon, prepared from pomegranate peels, as an adsorbent activated using H3PO4 and its ability to remove crystal violet from an aqueous solution. The adsorbent was characterized by the Brunauer–Emmett–Teller method (specific surface area: 51.0674 m2 g−1) and point of zero charge (pHPZC = 5.2). However, some examined factors were found to have significant impacts on the adsorption capacity of activated carbon derived from pomegranate peels such as the initial dye concentration (5–15 mg L−1), solution pH (2–14), adsorbent dose (1–8 g L−1), agitation speed (100–700 r/min), and temperature (298–338 K). The best adsorption capacity was found at pH 11 with an adsorbent dose of 1 g L−1, an agitation speed at 400 r/min, and a contact time of 45 min. The adsorption mechanism of crystal violet onto activated carbon derived from pomegranate peels was studied using the pseudo-first-order, pseudo-second-order, Elovich, and Webber–Morris diffusion models. The adsorption kinetics were found to rather follow a pseudo-second order kinetic model with a determination coefficient ( R2) of 0.999. The equilibrium adsorption data for crystal violet adsorbed onto activated carbon derived from pomegranate peels were analyzed by the Langmuir, Freundlich, Elovich, and Temkin models. The results indicate that the Langmuir model provides the best correlation with qmax capacities of 23.26 and 76.92 mg g−1 at 27°C and 32°C, respectively. The adsorption isotherms at different temperatures have been used for the determination of thermodynamic parameters like the free energy, enthalpy, and entropy to predict the nature of adsorption process. The negative values Δ G0 (−5.221 to −1.571 kJ mol−1) and Δ H0 (−86.141 kJ mol−1) indicate that the overall adsorption is spontaneous and exothermic with a physisorption process. The adsorbent derived from pomegranate peels was found to be very effective and suitable for the removal of reactive dyes from aqueous solutions, due to its availability, low-cost preparation, and good adsorption capacity.

Sign in / Sign up

Export Citation Format

Share Document