scholarly journals Reformulation of transmission and reflection problems in terms of quantum wave impedance function

2021 ◽  
Vol 25 (4) ◽  
Author(s):  
O. I. Hryhorchak
Keyword(s):  
Wave Impedance ◽  
Impedance Function ◽  
Quantum Wave ◽  
Transmission And Reflection

Effect of Varied Layer-Content/Thickness on Ballistic Performance of a Functionally Graded Al2O3/ZrO2 Material

2018 ◽  
Vol 928 ◽  
pp. 243-248 ◽  
Author(s):  
Yu Liang Chen ◽  
Chin Yu Huang
Keyword(s):  
Energy Absorption ◽  
Ceramic Composite ◽  
Single Layer ◽  
Areal Density ◽  
Wave Impedance ◽  
Functionally Graded ◽  
Ballistic Performance ◽  
Graded Material ◽  
Stress Damage ◽  
Transmission And Reflection

This study compared the ballistic performance of alumina (Al2O3)/ zirconia (ZrO2) functionally graded material (FGM) specimens with various levels of thickness and ZrO2 content and a pure Al2O3 single-layer ceramic composite (PCM). Ballistic tests were conducted with 0.3-inch armor-piercing (AP) projectiles, and finite element code LS-DYNA was used to examine energy absorption, stress distribution, and ceramic cone failure in the specimens. The findings are as follows: First, regarding energy absorption per unit of areal density, the 5% FGMs had the highest ballistic performance, which increased by up to 8%. By contrast, the ballistic performance of the 15% FGMs declined significantly to lower than that of the PCM. Second, the capability of the ceramic cone to withstand stress damage and projectiles was significantly greater in the 5% FGMs than in the 15% FGMs. Third, the wave impedance variations increased with the ZrO2 content in each layer, thereby enhancing the interactions between impact waves and aggravating ceramic damage. Thus, the intensities of transmission and reflection waves in the 15% FGMs increased, thereby causing reductions in its ballistic performance.

scholarly journals Anisotropy Characterization of Metallic Lens Structures

Micromachines ◽  
2021 ◽  
Vol 12 (9) ◽  
pp. 1114
Author(s):  
Yosef T. Aladadi ◽  
Majeed A. S. Alkanhal
Keyword(s):  
Impedance Matching ◽  
Wave Impedance ◽  
Reflection Coefficients ◽  
Lens Design ◽  
Anisotropic Behavior ◽  
Cell Parameters ◽  
Transmission And Reflection Coefficients ◽  
Permittivity And Permeability ◽  
Transmission And Reflection

This paper presents a full electromagnetic (EM) characterization of metallic lenses. The method is based on the utilization of free-space transmission and reflection coefficients to accurately obtain lenses’ tensorial EM parameters. The applied method reveals a clear anisotropic behavior with a full tensorial directional permittivity and permeability and noticeably dispersive permeability and wave impedance. This method yields accurate values for the effective refractive index, wave impedance, permittivity, and permeability, unlike those obtained by simple methods such as the eigenmode method. These correct cell parameters affect their lens performance, as manifested in a clear level of anisotropy, impedance matching, and losses. The effect of anisotropy caused by oblique incidence on the performance and operation of lens designs is illustrated in a lens design case.

Atomic-level imaging of the surface structure of Ag2O

1984 ◽  
Vol 42 ◽  
pp. 656-657
Author(s):  
William Krakow
Keyword(s):  
High Vacuum ◽  
Atomic Level ◽  
Ultra High Vacuum ◽  
Research Groups ◽  
Resolution Electron ◽  
Surface Reconstructions ◽  
Order Of Magnitude ◽  
High Resolution Electron Microscope ◽  
Saturated Structure ◽  
Transmission And Reflection

In recent years electron microscopy has been used to image surfaces in both the transmission and reflection modes by many research groups. Some of this work has been performed under ultra high vacuum conditions (UHV) and apparent surface reconstructions observed. The level of resolution generally has been at least an order of magnitude worse than is necessary to visualize atoms directly and therefore the detailed atomic rearrangements of the surface are not known. The present author has achieved atomic level resolution under normal vacuum conditions of various Au surfaces. Unfortunately these samples were exposed to atmosphere and could not be cleaned in a standard high resolution electron microscope. The result obtained surfaces which were impurity stabilized and reveal the bulk lattice (1x1) type surface structures also encountered by other surface physics techniques under impure or overlayer contaminant conditions. It was therefore decided to study a system where exposure to air was unimportant by using a oxygen saturated structure, Ag2O, and seeking to find surface reconstructions, which will now be described.

scholarly journals Transmission, Reflection and Dissipation of Microwaves in Magnetic Composites with Nanocrystalline Finemet-Type Flakes

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3499
Author(s):  
Anatoly B. Rinkevich ◽  
Dmitry V. Perov ◽  
Yuriy I. Ryabkov
Keyword(s):  
Composite Material ◽  
Microwave Absorption ◽  
Nanocrystalline Alloy ◽  
Reflection Coefficients ◽  
Magnetic Composites ◽  
Transmission And Reflection Coefficients ◽  
Wave Interference ◽  
Microwave Losses ◽  
Frequency Dependences ◽  
Transmission And Reflection

The microwave properties of a composite material containing flakes of finemet-type nanocrystalline alloy placed in the epoxy matrix have been investigated. Two compositions have been studied: with 15% and 30% flakes. Frequency dependences of transmission and reflection coefficients are measured in the frequency range from 12 to 38 GHz. The dielectric permittivity and magnetic permeability are obtained, and the microwave losses are calculated. The dependences of transmission and reflection coefficients have been drawn as functions of wave frequency and thickness of the composite material, taking into account the frequency dependences of permittivity and permeability. The regions of maximal and minimal microwave absorption have been defined. The influence of wave interference on the frequency dependence of microwave absorption is studied.

scholarly journals Controlling the optical properties of nanostructured oxide-based polymer films

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
N. C. Angastiniotis ◽  
S. Christopoulos ◽  
K. C. Petallidou ◽  
A. M. Efstathiou ◽  
A. Othonos ◽  
...  
Keyword(s):  
Optical Properties ◽  
Metal Oxide ◽  
Metal Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
Optimal Size ◽  
Specific Chemical ◽  
Nanostructured Oxide ◽  
Bulk Scale ◽  
Transmission And Reflection ◽  
Film Composites

AbstractA bulk scale process is implemented for the production of nanostructured film composites comprising unary or multi-component metal oxide nanoparticles dispersed in a suitable polymer matrix. The as-received nanoparticles, namely Al$$_2$$ 2 O$$_3$$ 3 , SiO$$_2$$ 2 and TiO$$_2$$ 2 and binary combinations, are treated following specific chemical and mechanical processes in order to be suspended at the optimal size and composition. Subsequently, a polymer extrusion technique is employed for the fabrication of each film, while the molten polymer is mixed with the treated metal oxide nanoparticles. Transmission and reflection measurements are performed in order to map the optical properties of the fabricated, nanostructured films in the UV, VIS and IR. The results substantiate the capability of the overall methodology to regulate the optical properties of the films depending on the type of nanoparticle formation which can be adjusted both in size and composition.

Guided wave‐based cable damage detection using wave energy transmission and reflection

2021 ◽  
Author(s):  
Zhi‐Feng Tang ◽  
Xiao‐Dong Sui ◽  
Yuan‐Feng Duan ◽  
Peng‐fei Zhang ◽  
Chung Bang Yun
Keyword(s):  
Damage Detection ◽  
Wave Energy ◽  
Guided Wave ◽  
Energy Transmission ◽  
Cable Damage ◽  
Transmission And Reflection

scholarly journals A GPR-Based Pavement Density Profiler: Operating Principles and Applications

2021 ◽  
Vol 13 (13) ◽  
pp. 2613
Author(s):  
Nectaria Diamanti ◽  
A. Peter Annan ◽  
Steven R. Jackson ◽  
Dylan Klazinga
Keyword(s):  
Asphalt Pavement ◽  
Wave Impedance ◽  
Asphalt Mixtures ◽  
Void Content ◽  
Air Voids ◽  
New Instrument ◽  
Pavement Engineering ◽  
And Performance ◽  
Air Void ◽  
Air Void Content

Density is one of the most important parameters in the construction of asphalt mixtures and pavement engineering. When a mixture is properly designed and compacted, it will contain enough air voids to prevent plastic deformation but will have low enough air void content to prevent water ingress and moisture damage. By mapping asphalt pavement density, areas with air void content outside of the acceptable range can be identified to predict its future life and performance. We describe a new instrument, the pavement density profiler (PDP) that has evolved from many years of making measurements of asphalt pavement properties. This instrument measures the electromagnetic (EM) wave impedance to infer the asphalt pavement density (or air void content) locally and over profiles.

scholarly journals In-situ monitoring for liquid metal jetting using a millimeter-wave impedance diagnostic

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Tammy Chang ◽  
Saptarshi Mukherjee ◽  
Nicholas N. Watkins ◽  
David M. Stobbe ◽  
Owen Mays ◽  
...  
Keyword(s):  
Liquid Metal ◽  
Millimeter Wave ◽  
Manufacturing Systems ◽  
Wave Impedance ◽  
In Situ Monitoring ◽  
Full Wave ◽  
Drop On Demand ◽  
The Time Domain ◽  
Metal Droplets

AbstractThis article presents a millimeter-wave diagnostic for the in-situ monitoring of liquid metal jetting additive manufacturing systems. The diagnostic leverages a T-junction waveguide device to monitor impedance changes due to jetted metal droplets in real time. An analytical formulation for the time-domain T-junction operation is presented and supported with a quasi-static full-wave electromagnetic simulation model. The approach is evaluated experimentally with metallic spheres of known diameters ranging from 0.79 to 3.18 mm. It is then demonstrated in a custom drop-on-demand liquid metal jetting system where effective droplet diameters ranging from 0.8 to 1.6 mm are detected. Experimental results demonstrate that this approach can provide information about droplet size, timing, and motion by monitoring a single parameter, the reflection coefficient amplitude at the input port. These results show the promise of the impedance diagnostic as a reliable in-situ characterization method for metal droplets in an advanced manufacturing system.

Sign in / Sign up

Export Citation Format

Share Document