scholarly journals A Prediction Formula for The Estimation of Sediment Load in The Upper Reach of Al-Gharraf River

2021 ◽  
Vol 27 (5) ◽  
pp. 63-74
Author(s):  
Mariam H. Daham
Keyword(s):  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Relative Error ◽  
River Flow ◽  
Sediment Load ◽  
Sampling Period ◽  
Average Relative Error ◽  
Mean Square ◽  
Determination Coefficient

The presence of deposition in the river decreases the river flow capability's efficiency due to the absence of maintenance along the river. In This research, a new formula to evaluate the sediment capacity in the upstream part of Al-Gharraf River will be developed. The current study reach lies in Wasit province with a distance equal to 58 km. The selected reach of the river was divided into thirteen stations. At each station, the suspended load and the bedload were collected from the river during a sampling period extended from February 2019 till July 2019. The samples were examined in the laboratory with a different set of sample tests. The formula was developed using data of ten stations, and the other three stations were used for validation. The determination coefficient, root mean square error and average relative error values were equal to 0.987,0.97 kg/s and 7%, respectively. Also, the values of the sediment load that resulted from the formula close to the results of the HEC-RAS model from a previous study, and the determination coefficient, root mean square error, and average relative error values were equal to  0.988, 0.88 kg/s, and 7 %  respectively for the simulated model.

scholarly journals One-Dimensional Pollutant Transport Modelling of Cadmium (Cd), Chromium (Cr) and Lead (Pb) in Saguling Reservoir

2020 ◽  
Vol 148 ◽  
pp. 07009
Author(s):  
Wiguna Sudiartha Gede Adi ◽  
Oginawati Katharina ◽  
Sofyan Asep ◽  
Ardiwinata ◽  
Kurnia Asep ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Relative Error ◽  
Mean Square ◽  
Transport Modelling ◽  
Test Models ◽  
Verification Test ◽  
Cadmium Lead

The existing conditions of the Saguling Reservoir are reported to have suffered severe heavy metal pollution due to the presence of wastewater inputs from various types of industries flowing into Citarum River and then accumulating in the Saguling Reservoir. From the results of calibration tests of heavy metal models on water using the Root Mean Square Error (RMSE) analysis and Relative Error (RE) analysis, obtained dispersion coefficients on Cadmium, Chromium, and Lead metals sequentially 1 m2 / second (with RMSE 0,00515 and 34% relative error); 1 m2 / second (with RMSE 0.00595 and relative error 26%); and 2.5 m2 / second (with RMSE 0.028205 and relative error 41.25%) which shows that the model has good capability to simulate the concentration of heavy metals approaching the actual data both in the dry and wet seasons. From the results of the verification test models of concentration of cadmium, lead and chromium in sediments using the Root Mean Square Error (RMSE) analysis and Relative Error (RE) analysis, obtained sequentially 18.53 and 77%; 10.43 and 47.15%; 2.789 and 33%. Error values in sediment concentrations are quite large because of the difficulty of making assumptions that are close to natural conditions.

Shielded open-circuited probe for in-situ measurements of soil permittivity in Very high frequency (VHF) and Ultra high frequency (UHF) bands

2021 ◽  
pp. 014233122110377
Author(s):  
Konstantin Muzalevskiy ◽  
Andrey Karavaysky
Keyword(s):  
Reflection Coefficient ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
High Frequency ◽  
Mean Square ◽  
Frequency Range ◽  
Frequency Spectra ◽  
Determination Coefficient ◽  
Error Determination

In this paper, the shielded open-circuited probe operating in the wide frequency range from 75MHz to 2GHz is proposed. The probe is made of an SubMiniature version A (SMA) flange connector. The central rod of the SMA connector emerges from a coaxial transition in the flange and shielded by four rods. The robe design allows us to calculate of the probe reflection coefficient S11 used simple analytical transmission line model (TEM wave mode), the parameters of which were calibrated on a set of substances with a known frequency spectrum of permittivity. The refractive index (RI) and normalized attenuation coefficient (NAC) retrieval technique is based on solving the inverse problem of minimizing the residual norm between measured and calculated frequency spectra of reflection coefficient S11. After calibration, the root-mean-square error (determination coefficient) between the measured and calculated module and phase of the reflection coefficient S11 for the sets of calibration media air, distilled water, butanol, pure ice, water solution with NaCl of salinity of 8.9% do not exceed 0.26dB (0.995) and 0.03 rad (0.999), respectively, in the frequency range from 75MHz to 2GHz. The root-mean-square error (determination coefficient) between the measured RI and NAC spectra for four soil cover samples (variation of the clay fraction from 10.5 g/g to 47.6 g/g) using the proposed probe and a precision coaxial cell not exceeds 0.109 (0.993) and 0.057 (0.986), respectively, in the frequency range from 75 MHz to 2 GHz. As a result, it is experimentally shown that RI и NAC can be measured by the proposed non-precision probe with an error comparable to the precision coaxial cell.

scholarly journals Rapid and Simultaneous Measurement of Praeruptorin A, Praeruptorin B, Praeruptorin E, and Moisture Contents in Peucedani Radix Using Near-Infrared Spectroscopy and Chemometrics

2020 ◽  
Vol 103 (2) ◽  
pp. 504-512
Author(s):  
Yijuan Hu ◽  
Hongjian Zhang ◽  
Weiqing Liang ◽  
Pan Xu ◽  
Kelang Lou ◽  
...  
Keyword(s):  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Near Infrared ◽  
Nir Spectroscopy ◽  
Mean Square ◽  
Determination Coefficient ◽  
Moisture Contents ◽  
Calibration Models

Abstract Background: Peucedani Radix is a popular traditional Chinese medicine herb with a long history in China. Praeruptorin A (PA), praeruptorin B (PB), and praeruptorin E (PE) are usually taken as important quality indexes of Peucedani Radix. Objective: To establish a rapid method for simultaneous determination of PA, PB, PE, and moisture contents in Peucedani Radix using near-infrared (NIR) spectroscopy and chemometrics. Methods: One hundred twenty Peucedani Radix samples were analyzed with HPLC as a reference method. The NIR spectral scanning range was from 12000 cm−1 to 4000 cm−1. Partial least squares (PLS) regression algorithm was used to establish calibration models. Three variable selection methods were investigated, including variable importance in projection (VIP), competitive adaptive reweighted sampling (CARS), and Monte Carlo uninformative variable elimination (MCUVE). The performances of the established models were evaluated by root-mean-square error (RMSEC) and determination coefficient (Rc2) of calibration set, root-mean-square error (RMSEP) and determination coefficient (Rp2) of prediction set, and residual predictive deviation (RPD). Results: A clear ranking of the performance of the calibration models could be as follows: CARS-PLS > MCUVE-PLS > VIP-PLS > Full-PLS. For CARS-PLS, Rp2, RMSEP, and RPD of the prediction set are as follows: 0.9204, 0.0860%, and 3.5850 for PA; 0.8011, 0.0431%, and 2.0868 for PB; 0.8043, 0.0367%, and 2.1569 for PE; and 0.9249, 0.3350%, and 3.6551 for moisture, respectively. Conclusions: The NIR spectroscopy combined with CARS-PLS calibration models could be used for rapid and accurate determination of PA, PB, PE, and moisture contents in Peucedani Radix samples.

scholarly journals Estimation of Ascorbic Acid in Intact Acerola (Malpighia emarginata DC) Fruit by NIRS and Chemometric Analysis

Horticulturae ◽  
2019 ◽  
Vol 5 (1) ◽  
pp. 12 ◽  
Author(s):  
Francisca Moraes ◽  
Rosangela Costa ◽  
Camilo Morais ◽  
Fábio Medeiros ◽  
Tássia Fernandes ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Acid Content ◽  
Ascorbic Acid Content ◽  
Fast Method ◽  
Mean Square ◽  
Determination Coefficient ◽  
G Ratio

Acerola fruit is one of the richest natural sources of ascorbic acid ever known. As a consequence, acerola fruit and its products are demanded worldwide for the production of health supplements and the development of functional products. However, the analytical determination of ascorbic acid is time-consuming and costly. In this study, we show a non-destructive, reliable, and fast method to measure the ascorbic acid content in intact acerola, using near-infrared spectroscopy (NIRS) associated with multivariate calibration methods. Models using variable selection by means of interval partial least squares (iPLS) and a genetic algorithm (GA) were tested. The best model for ascorbic acid content, based on the prediction performance, was the GA-PLS method with second derivative spectral pretreatment, with a root mean square error of cross-validation equal to 22.9 mg/100 g, root mean square error of prediction equal to 46.3 mg/100 g, ratio of prediction to deviation equal to 8.0, determination coefficient for calibration equal to 0.98 and determination coefficient for prediction equal to 0.96. The current methodology, using NIR spectroscopy and chemometrics, is a promising and rapid tool to determine the ascorbic acid content of intact acerola fruit.

scholarly journals Estimation of Apple Flowering Frost Loss for Fruit Yield Based on Gridded Meteorological and Remote Sensing Data in Luochuan, Shaanxi Province, China

2021 ◽  
Vol 13 (9) ◽  
pp. 1630
Author(s):  
Yaohui Zhu ◽  
Guijun Yang ◽  
Hao Yang ◽  
Fa Zhao ◽  
Shaoyu Han ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Minimum Temperature ◽  
Price Regulation ◽  
Flowering Period ◽  
Mean Square ◽  
Prevention Measures ◽  
Agricultural Insurance

With the increase in the frequency of extreme weather events in recent years, apple growing areas in the Loess Plateau frequently encounter frost during flowering. Accurately assessing the frost loss in orchards during the flowering period is of great significance for optimizing disaster prevention measures, market apple price regulation, agricultural insurance, and government subsidy programs. The previous research on orchard frost disasters is mainly focused on early risk warning. Therefore, to effectively quantify orchard frost loss, this paper proposes a frost loss assessment model constructed using meteorological and remote sensing information and applies this model to the regional-scale assessment of orchard fruit loss after frost. As an example, this article examines a frost event that occurred during the apple flowering period in Luochuan County, Northwestern China, on 17 April 2020. A multivariable linear regression (MLR) model was constructed based on the orchard planting years, the number of flowering days, and the chill accumulation before frost, as well as the minimum temperature and daily temperature difference on the day of frost. Then, the model simulation accuracy was verified using the leave-one-out cross-validation (LOOCV) method, and the coefficient of determination (R2), the root mean square error (RMSE), and the normalized root mean square error (NRMSE) were 0.69, 18.76%, and 18.76%, respectively. Additionally, the extended Fourier amplitude sensitivity test (EFAST) method was used for the sensitivity analysis of the model parameters. The results show that the simulated apple orchard fruit number reduction ratio is highly sensitive to the minimum temperature on the day of frost, and the chill accumulation and planting years before the frost, with sensitivity values of ≥0.74, ≥0.25, and ≥0.15, respectively. This research can not only assist governments in optimizing traditional orchard frost prevention measures and market price regulation but can also provide a reference for agricultural insurance companies to formulate plans for compensation after frost.

scholarly journals Low Cost Automatic Reconstruction of Tree Structure by AdQSM with Terrestrial Close-Range Photogrammetry

Forests ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 1020
Author(s):  
Yanqi Dong ◽  
Guangpeng Fan ◽  
Zhiwu Zhou ◽  
Jincheng Liu ◽  
Yongguo Wang ◽  
...  
Keyword(s):  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Low Cost ◽  
Reference Value ◽  
Tree Height ◽  
Point Clouds ◽  
Tree Structure ◽  
Mean Square ◽  
Tree Model

The quantitative structure model (QSM) contains the branch geometry and attributes of the tree. AdQSM is a new, accurate, and detailed tree QSM. In this paper, an automatic modeling method based on AdQSM is developed, and a low-cost technical scheme of tree structure modeling is provided, so that AdQSM can be freely used by more people. First, we used two digital cameras to collect two-dimensional (2D) photos of trees and generated three-dimensional (3D) point clouds of plot and segmented individual tree from the plot point clouds. Then a new QSM-AdQSM was used to construct tree model from point clouds of 44 trees. Finally, to verify the effectiveness of our method, the diameter at breast height (DBH), tree height, and trunk volume were derived from the reconstructed tree model. These parameters extracted from AdQSM were compared with the reference values from forest inventory. For the DBH, the relative bias (rBias), root mean square error (RMSE), and coefficient of variation of root mean square error (rRMSE) were 4.26%, 1.93 cm, and 6.60%. For the tree height, the rBias, RMSE, and rRMSE were—10.86%, 1.67 m, and 12.34%. The determination coefficient (R2) of DBH and tree height estimated by AdQSM and the reference value were 0.94 and 0.86. We used the trunk volume calculated by the allometric equation as a reference value to test the accuracy of AdQSM. The trunk volume was estimated based on AdQSM, and its bias was 0.07066 m3, rBias was 18.73%, RMSE was 0.12369 m3, rRMSE was 32.78%. To better evaluate the accuracy of QSM’s reconstruction of the trunk volume, we compared AdQSM and TreeQSM in the same dataset. The bias of the trunk volume estimated based on TreeQSM was −0.05071 m3, and the rBias was −13.44%, RMSE was 0.13267 m3, rRMSE was 35.16%. At 95% confidence interval level, the concordance correlation coefficient (CCC = 0.77) of the agreement between the estimated tree trunk volume of AdQSM and the reference value was greater than that of TreeQSM (CCC = 0.60). The significance of this research is as follows: (1) The automatic modeling method based on AdQSM is developed, which expands the application scope of AdQSM; (2) provide low-cost photogrammetric point cloud as the input data of AdQSM; (3) explore the potential of AdQSM to reconstruct forest terrestrial photogrammetric point clouds.

Comparison of Thresholding and Edge Detection Segmentation Techniques

2013 ◽  
Vol 860-863 ◽  
pp. 2783-2786
Author(s):  
Yu Bing Dong ◽  
Hai Yan Wang ◽  
Ming Jing Li
Keyword(s):  
Image Segmentation ◽  
Root Mean Square Error ◽  
Edge Detection ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Experimental Results ◽  
Mean Square ◽  
Segmentation Method ◽  
Segmentation Algorithms

Edge detection and thresholding segmentation algorithms are presented and tested with variety of grayscale images in different fields. In order to analyze and evaluate the quality of image segmentation, Root Mean Square Error is used. The smaller error value is, the better image segmentation effect is. The experimental results show that a segmentation method is not suitable for all images segmentation.

Quantitative Analysis of Forsythiae fructus by Near Infrared Spectroscopy

2013 ◽  
Vol 807-809 ◽  
pp. 1967-1971
Author(s):  
Yan Bai ◽  
Xiao Yan Duan ◽  
Hai Yan Gong ◽  
Cai Xia Xie ◽  
Zhi Hong Chen ◽  
...  
Keyword(s):  
Infrared Spectroscopy ◽  
Root Mean Square Error ◽  
Mean Square Error ◽  
Root Mean Square ◽  
Near Infrared Spectroscopy ◽  
Near Infrared ◽  
Cross Validation ◽  
Ethanol Extract ◽  
Mean Square ◽  
Validation Set

In this paper, the content of forsythoside A and ethanol-extract were rapidly determinated by near-infrared reflectance spectroscopy (NIRS). 85 samples of Forsythiae Fructus harvested in Luoyang from July to September in 2012 were divided into a calibration set (75 samples) and a validation set (10 samples). In combination with the partical least square (PLS), the quantitative calibration models of forsythoside A and ethanol-extract were established. The correlation coefficient of cross-validation (R2) was 0.98247 and 0.97214 for forsythoside A and ethanol-extract, the root-mean-square error of calibration (RMSEC) was 0.184 and 0.570, the root-mean-square error of cross-validation (RMSECV) was 0.81736 and 0.36656. The validation set were used to evaluate the performance of the models, the root-mean-square error of prediction (RMSEP) was 0.221 and 0.518. The results indicated that it was feasible to determine the content of forsythoside A and ethanol-extract in Forsythiae Fructus by near-infrared spectroscopy.

Sign in / Sign up

Export Citation Format

Share Document