scholarly journals Review—The Development of Wearable Polymer-Based Sensors: Perspectives

2020 ◽  
Author(s):  
Christian Harito ◽  
Listya Utari ◽  
Brian Yuliarto ◽  
setyo purwanto ◽  
Syed S.J. Zaidi ◽  
...  
Keyword(s):  
Power Systems ◽  
Liquid Crystalline ◽  
Piezoelectric Materials ◽  
Wearable Sensors ◽  
Holistic Approach ◽  
Polymer Materials ◽  
Smart Polymer ◽  
Crystalline Polymers ◽  
Stimulus Response ◽  
Advantages And Disadvantages

The development of smart polymer materials is reviewed and illustrated. Important examples of these polymers include conducting polymers, ionic gels, stimulus-response be used polymers, liquid crystalline polymers and piezoelectric materials, which have desirable properties for use in wearable sensors. This review outlines the mode of action in these types of smart polymers systems for utilisation as wearable sensors. Categories of wearable sensors are considered as tattoo-like designs, patch-like, textile-based, and contact lens-based sensors. The advantages and disadvantages of each sensor types are considered together with information on the typical performance. The research gap linking smart polymer materials to wearable sensors with integrated power systems is highlighted. Smart polymer systems may be used as part of a holistic approach to improve wearable devices and accelerate the integration of wearable sensors and power systems, particularly in health care.

Quantitative high-resolution electron microscopy (HREM) of defects in ordered polymers

1996 ◽  
Vol 54 ◽  
pp. 166-167
Author(s):  
Patricia M. Wilson ◽  
David C. Martin
Keyword(s):  
Electron Microscopy ◽  
Electron Beam ◽  
High Resolution ◽  
Liquid Crystalline ◽  
High Resolution Electron Microscopy ◽  
Polymer Materials ◽  
Scattered Electron ◽  
Crystalline Polymers ◽  
Resolution Electron ◽  
Beam Damage

Efforts in our laboratory and elsewhere have established the utility of low dose high resolution electron microscopy (HREM) for imaging the microstructure of crystalline and liquid crystalline polymers. In a number of polymer systems, direct imaging of the lattice spacings by HREM has provided information about the size, shape, and relative orientation of ordered domains in these materials. However, because of the extent of disorder typical in many polymer microstructures, and because of the sensitivity of most polymer materials to electron beam damage, there have been few studies where the contrast observed in HREM images has been analyzed in a quantitative fashion.Here, we discuss two instances where quantitative information about HREM images has been used to provide new insight about the organization of crystalline polymers in the solid-state. In the first, we study the distortion of the polymer lattice planes near the core of an edge dislocation and compare these results to theories of dislocations in anisotropic and liquid crystalline solids. In the second, we investigate the variations in HREM contrast near the edge of wedge-shaped samples. The polymer used in this study was the diacetylene DCHD, which is stable to electron beam damage (Jc = 20 C/cm2) and highly crystalline. The instrument used in this work was a JEOL 4000 EX HRTEM with a beam blanidng device. More recently, the 4000 EX has been installed with instrumentation for dynamically recording scattered electron beam currents.

2000 Macromolecular Science and Engineering Award LectureThe versatility of azobenzene polymers

2001 ◽  
Vol 79 (7) ◽  
pp. 1093-1100 ◽  
Author(s):  
Almeria Natansohn ◽  
Paul Rochon
Keyword(s):  
Liquid Crystalline ◽  
Surface Deformation ◽  
Polymer Structure ◽  
Light Polarization ◽  
Polymer Materials ◽  
Science And Engineering ◽  
Crystalline Polymers ◽  
The Third ◽  
Macroscopic Motion ◽  
Azobenzene Groups

The well-known trans–cis–trans photoisomerization of azobenzenes produces at least three different kinds of motion in the polymer materials to which the azobenzenes are bound. The first is a photoinduced motion of the azobenzene groups only, and they can align in a selected position with respect to the light polarization. The second is a macroscopic motion of huge amounts of polymeric material, producing surface deformation, and the third is a reorganization of smectic domains in liquid crystalline polymers. These motions and their consequences are briefly discussed in relation to the polymer structure and some possible photonic applications are mentioned.Key words: photoinduced orientation, azobenzene polymers, surface gratings, photonics, thermochromism, photochromism, photorefractivity, photoinduced chirality and switching.

Photomobile Polymer Materials: Photoresponsive Behavior of Cross-Linked Liquid-Crystalline Polymers with Mesomorphic Diarylethenes

2015 ◽  
Vol 21 (8) ◽  
pp. 3174-3177 ◽  
Author(s):  
Jun-ichi Mamiya ◽  
Akito Kuriyama ◽  
Naoki Yokota ◽  
Munenori Yamada ◽  
Tomiki Ikeda
Keyword(s):  
Liquid Crystalline ◽  
Liquid Crystalline Polymers ◽  
Polymer Materials ◽  
Crystalline Polymers

Structure-property relations of liquid crystalline polymers

1987 ◽  
Vol 45 ◽  
pp. 460-463
Author(s):  
Linda C. Sawyer
Keyword(s):  
Solid State ◽  
Liquid Crystalline ◽  
Structural Model ◽  
Crystalline Polymer ◽  
Liquid Crystalline Polymers ◽  
Mechanical Anisotropy ◽  
Structure Property ◽  
Preparation Methods ◽  
Crystalline Polymers ◽  
Extended Chain

Recent liquid crystalline polymer (LCP) research has sought to define structure-property relationships of these complex new materials. The two major types of LCPs, thermotropic and lyotropic LCPs, both exhibit effects of process history on the microstructure frozen into the solid state. The high mechanical anisotropy of the molecules favors formation of complex structures. Microscopy has been used to develop an understanding of these microstructures and to describe them in a fundamental structural model. Preparation methods used include microtomy, etching, fracture and sonication for study by optical and electron microscopy techniques, which have been described for polymers. The model accounts for the macrostructures and microstructures observed in highly oriented fibers and films.Rod-like liquid crystalline polymers produce oriented materials because they have extended chain structures in the solid state. These polymers have found application as high modulus fibers and films with unique properties due to the formation of ordered solutions (lyotropic) or melts (thermotropic) which transform easily into highly oriented, extended chain structures in the solid state.

Factors affecting microstructural scale in liquid crystalline polymers

1990 ◽  
Vol 48 (4) ◽  
pp. 220-221
Author(s):  
Christine M. Dannels ◽  
Christopher Viney
Keyword(s):  
Liquid Crystalline ◽  
Liquid Crystalline Polymers ◽  
Factors Affecting ◽  
Crystalline Polymers ◽  
Thermal Expansion Coefficients ◽  
Low Thermal Expansion ◽  
Lower Viscosity ◽  
Fine Microstructure ◽  
Planar Orientation ◽  
Strength And Stiffness

Processing polymers from the liquid crystalline state offers several advantages compared to processing from conventional fluids. These include: better axial strength and stiffness in fibers, better planar orientation in films, lower viscosity during processing, low solidification shrinkage of injection moldings (thermotropic processing), and low thermal expansion coefficients. However, the compressive strength of the solid is disappointing. Previous efforts to improve this property have focussed on synthesizing stiffer molecules. The effect of microstructural scale has been overlooked, even though its relevance to the mechanical and physical properties of more traditional materials is well established. By analogy with the behavior of metals and ceramics, one would expect a fine microstructure (i..e. a high density of orientational defects) to be desirable.Also, because much microstructural detail in liquid crystalline polymers occurs on a scale close to the wavelength of light, light is scattered on passing through these materials.

Hybrid polymer composite materials. Part 2. Preparation technology

2020 ◽  
pp. 8-13
Keyword(s):  
Composite Materials ◽  
Impact Toughness ◽  
Polymer Composites ◽  
The Other ◽  
Polymer Materials ◽  
Hybrid Polymer ◽  
Preparation Technology ◽  
Advantages And Disadvantages ◽  
Hybrid Polymer Composite ◽  
The One

The main methods (pressing and winding) of the processing of hybrid polymer composites to obtain items were examined. Advantages and disadvantages of the methods were noted. Good combinations of different-module fibers (carbon, glass, boron, organic) in hybrid polymer materials are described, which allow one to prepare materials with high compression strength on the one hand, and to increase fracture energy of samples and impact toughness on the other hand.

Possibilities of using biodegradable polymeric materials in the agricultural sector

2020 ◽  
Vol 67 (2) ◽  
pp. 115-120
Author(s):  
Raisa A. Alekhina ◽  
Victoriya E. Slavkina ◽  
Yuliya A. Lopatina
Keyword(s):  
Mechanical Properties ◽  
Biodegradable Polymers ◽  
Biodegradable Polymer ◽  
Agricultural Sector ◽  
Polymeric Materials ◽  
Polymer Materials ◽  
Limiting Factors ◽  
Research Purpose ◽  
Biodegradable Materials ◽  
Advantages And Disadvantages

The article presents options for recycling polymers. The use of biodegradable materials is promising. This is a special class of polymers that can decompose under aerobic or anaerobic conditions under the action of microorganisms or enzymes forming natural products such as carbon dioxide, nitrogen, water, biomass, and inorganic salts. (Research purpose) The research purpose is in reviewing biodegradable materials that can be used for the manufacture of products used in agriculture. (Materials and methods) The study are based on open information sources containing information about biodegradable materials. Research methods are collecting, studying and comparative analysis of information. (Results and discussion) The article presents the advantages and disadvantages of biodegradable materials, mechanical properties of the main groups of biodegradable polymers. The article provides a summary list of agricultural products that can be made from biodegradable polymer materials. It was found that products from the general group are widely used in agriculture. Authors have found that products from a special group can only be made from biodegradable polymers with a controlled decomposition period in the soil, their use contributes to increasing the productivity of crops. (Conclusions) It was found that biodegradable polymer materials, along with environmental safety, have mechanical properties that allow them producing products that do not carry significant loads during operation. We have shown that the creation of responsible products (machine parts) from biodegradable polymers requires an increase in their strength properties, which is achievable by creating composites based on them. It was found that the technological complexity of their manufacture and high cost are the limiting factors for the widespread use of biodegradable polymers at this stage.

Polymer Chemistry

2004 ◽  
Keyword(s):  
Conducting Polymers ◽  
Liquid Crystalline ◽  
Polymer Chemistry ◽  
Chain Growth ◽  
Crystalline Polymers ◽  
Wide Range ◽  
Cyclic Oligomers ◽  
Step Growth

Polymer Chemistry: A Practical Approach in Chemistry has been designed for both chemists working in and new to the area of polymer synthesis. It contains detailed instructions for preparation of a wide-range of polymers by a wide variety of different techniques, and describes how this synthetic methodology can be applied to the development of new materials. It includes details of well-established techniques, e.g. chain-growth or step-growth processes together with more up-to-date examples using methods such as atom-transfer radical polymerization. Less well-known procedures are also included, e.g. electrochemical synthesis of conducting polymers and the preparation of liquid crystalline elastomers with highly ordered structures. Other topics covered include general polymerization methodology, controlled/"living" polymerization methods, the formation of cyclic oligomers during step-growth polymerization, the synthesis of conducting polymers based on heterocyclic compounds, dendrimers, the preparation of imprinted polymers and liquid crystalline polymers. The main bulk of the text is preceded by an introductory chapter detailing some of the techniques available to the scientist for the characterization of polymers, both in terms of their chemical composition and in terms of their properties as materials. The book is intended not only for the specialist in polymer chemistry, but also for the organic chemist with little experience who requires a practical introduction to the field.

Sign in / Sign up

Export Citation Format

Share Document