scholarly journals Quantitative and qualitative analysis of segmental dielectric relaxations and space charge by TSDC in nanocomposites of natural rubber/clay

2020 ◽  
Vol 66 (2 Mar-Apr) ◽  
pp. 127
Author(s):  
L. A. Martínez ◽  
R. Perera ◽  
L. Tarife
Keyword(s):  
Qualitative Analysis ◽  
Natural Rubber ◽  
Space Charge ◽  
Glass Transition Region ◽  
Dielectric Relaxations ◽  
Transmission Electron ◽  
Dispersion Degree ◽  
Layered Clays ◽  
Standard Compound ◽  
Thermally Stimulated Depolarization

The effect of adding three different layered clays, a sodium montmorillonite and two commercial modified montmorillonites, on the morphology and molecular dynamics of natural rubber characterized by Transmission Electron Microscopy and Thermally Stimulated Depolarization Currents (TSDC) was studied. Carbon black was employed as reinforcing filler in a standard compound prepared and used for comparison purposes. The morphological results revealed that the sample with Cloisite\circledR 15A displays the highest degree of exfoliation, which suggests a stronger compatibility between the organic and inorganic phases. When the dispersion degree increases, a decrease of the activation energy was found from the quantitative analysis of the space charge dielectric relaxations.  From the qualitative analysis of the dipolar dielectric relaxations around $T_{g}$, changes in  the dielectric relaxation profile and in the peak localization were attributed to probable interactions between the nanofillers and the elastomer in the glass transition region of the NR.

Extraction and identification of fillers and pigments from pyrolyzed rubber and tire samples

1996 ◽  
Vol 54 ◽  
pp. 174-175
Author(s):  
P. Sadhukhan ◽  
J. B. Zimmerman
Keyword(s):  
Zinc Oxide ◽  
Electron Microscope ◽  
Carbon Black ◽  
Natural Rubber ◽  
Transmission Electron Microscope ◽  
Rolling Resistance ◽  
Synthetic Polymers ◽  
Nitrogen Atmosphere ◽  
Transmission Electron ◽  
Curing Agents

Rubber stocks, specially tires, are composed of natural rubber and synthetic polymers and also of several compounding ingredients, such as carbon black, silica, zinc oxide etc. These are generally mixed and vulcanized with additional curing agents, mainly organic in nature, to achieve certain “designing properties” including wear, traction, rolling resistance and handling of tires. Considerable importance is, therefore, attached both by the manufacturers and their competitors to be able to extract, identify and characterize various types of fillers and pigments. Several analytical procedures have been in use to extract, preferentially, these fillers and pigments and subsequently identify and characterize them under a transmission electron microscope.Rubber stocks and tire sections are subjected to heat under nitrogen atmosphere to 550°C for one hour and then cooled under nitrogen to remove polymers, leaving behind carbon black, silica and zinc oxide and 650°C to eliminate carbon blacks, leaving only silica and zinc oxide.

scholarly journals Exploring the Capability of HAADF-STEM Techniques to Characterize Graphene Distribution in Nanocomposites by Simulations

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
N. Baladés ◽  
D. L. Sales ◽  
M. Herrera ◽  
A. M. Raya ◽  
J. C. Hernández-Garrido ◽  
...  
Keyword(s):  
Electron Tomography ◽  
Carbon Matrix ◽  
Reconstruction Algorithm ◽  
Dark Field ◽  
Graphene Layers ◽  
Transmission Electron ◽  
Dispersion Degree ◽  
Scanning Transmission ◽  
The Matrix ◽  
Annular Dark Field

This paper explores the capability of scanning transmission electron microscopy (STEM) techniques in determining the dispersion degree of graphene layers within the carbon matrix by using simulated high-angle annular dark-field (HAADF) images. Results ensure that unmarked graphene layers are only detectable if their orientation is parallel to the microscope beam. Additionally, gold-marked graphene layers allow evaluating the dispersion degree in structural composites. Moreover, electron tomography has been demonstrated to provide truthfully 3D distribution of the graphene sheets inside the matrix when an appropriate reconstruction algorithm and 2D projections including channelling effect are used.

Properties of Natural Rubber Nanocomposites Reinforced with Carbon Nanotubes

2015 ◽  
Vol 1109 ◽  
pp. 195-199 ◽  
Author(s):  
Abd Aziz Azira ◽  
Dayang Habibah Abangismawi I. Hassim ◽  
D. Verasamy ◽  
Abu Bakar Suriani ◽  
M. Rusop
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Natural Rubber ◽  
Considerable Increase ◽  
Physical And Mechanical Properties ◽  
Rubber Matrix ◽  
Rubber Composites ◽  
Transmission Electron ◽  
Maximum Conductivity ◽  
Polymer Latex

In order to achieve improvements in the performance of rubber materials, the development of carbon nanotube (CNT)-reinforced rubber composites was attempted. The CNT/epoxidised natural rubber (ENR) nanocomposite was prepared through latex technology. Physical and mechanical properties of the CNT/ENR nanocomposites were characterized in contrast to the carbon black (CB)/ENR composite. The dispersion of the CNTs in the rubber matrix and interfacial bonding between them were rather good; monitored transmission electron microscopy and scanning electron microscopy. The mechanical properties of the CNT-reinforced ENR showed a considerable increase compared to the neat ENR and traditional CB/ENR composite. The storage modulus of the CNT/ENR nanocomposites greatly exceeds that of neat ENR and CB/ENR composites and a maximum conductivity of about 1 S m-1 can be achieved. The approach presented can be adapted to other CNT/polymer latex systems.

scholarly journals Shear Flow Induced Alignment of Carbon Nanotubes in Natural Rubber

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Yan He ◽  
Zhifang Cao ◽  
Lianxiang Ma
Keyword(s):  
Carbon Nanotubes ◽  
Natural Rubber ◽  
Volume Fraction ◽  
Mechanical Analysis ◽  
Multiwalled Carbon ◽  
Variable Volume ◽  
Transmission Electron ◽  
Aligned Carbon Nanotubes ◽  
Rubber Composite ◽  
Spectroscopy Studies

A new procedure for the fabrication of natural rubber composite with aligned carbon nanotubes is provided in this study. The two-step approach is based on (i) the preparation of mixture latex of natural rubber, multiwalled carbon nanotubes, and other components and (ii) the orientation of carbon nanotubes by a flow field. Rubber composite sheets filled with variable volume fraction of aligned carbon nanotubes were fabricated and then confirmed by transmission electron microscopy and Raman spectroscopy studies. An obvious increase in thermal conductivity has been obtained after the alignment of carbon nanotubes. The dynamic mechanical analysis was carried out in a tear mode for the composite.

Three-Dimensional Dispersion of Nano-Fillers in Soft Composite as Revealed by Transmission Electron Microscopy/Electron Tomography (3D-TEM)

2006 ◽  
Vol 514-516 ◽  
pp. 353-358 ◽  
Author(s):  
Shinzo Kohjiya
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Carbon Black ◽  
Natural Rubber ◽  
Structural Information ◽  
Electron Tomography ◽  
Nano Composites ◽  
Nano Structure ◽  
Transmission Electron ◽  
Particulate Silica

. Generally rubber products are a typical soft material, and a composite of a nano-filler (typically, carbon black or particulate silica) and a rubber (natural rubber and various synthetics are used). The properties of these soft nano-composites have been well known to depend on the dispersion of the nano-filler in the rubbery matrix. The most powerful tool for the elucidation of it has been transmission electron microscopy (TEM). The microscopic techniques are based on the projection of 3-dimensional (3D) body on a plane (x, y plane), thus the structural information along the thickness (z axis) direction of the sample is difficult to obtain. This paper describes our recent results on the dispersion of carbon black (CB) and particulate silica in natural rubber (NR) matrix observed by TEM combined with electron tomography (3D-TEM) technique, which enabled us to obtain images of 3D nano-structure of the sample. Thus, 3D images of CB and silica in NR matrix are visualized and analyzed in this communication. These results are precious ones for the design of soft nano-composites, and the technique will become an indispensable one in nanotechnology.

Sign in / Sign up

Export Citation Format

Share Document