scholarly journals Corrosion resistance evaluation of boron-carbon coating on ASTM A-36 steel

2021 ◽  
Vol 68 (1 Jan-Feb) ◽  
Author(s):  
Alfredo Márquez-Herrera ◽  
Joel Moreno-Palmerin
Keyword(s):  
Corrosion Resistance ◽  
Carbon Coating ◽  
Fused Deposition Modeling ◽  
Electrochemical Impedance ◽  
Reference Electrode ◽  
Thermochemical Treatment ◽  
Microscopic Analysis ◽  
Platinum Foil ◽  
Fused Deposition ◽  
Boron Carbon

The ASTM A-36 steel is the main alloy, used in the metal-mechanical industry. In the present study, the effect of boron-carbon coating on the hardness and corrosion resistance of the steel ASTM A-36 was reported. Boronizing thermochemical treatment was carried out at 950 °C for 4 h followed by the carburizing process at 930 °C for 6 h. The corrosion study was conducted using the polarization technique (Tafel) and electrochemical impedance spectroscopy (EIS), which employed a fused deposition modeling-based 3D printing electrochemical cell made of polylactic acid (PLA). A commercial platinum foil and an Ag/AgCl (3.5 M KCl) electrode were used as the counter and reference electrode, respectively. The working electrode used an area of 1 cm2 of the sample. Optical microscopic analysis shown that borides formed on the surface of steels has a saw-tooth morphology and a uniform coating with a thickness of about 60 µm in both samples. The carburizing over boride promoted the formation of coatings on the outermost layer of the samples with a thickness of about 17 µm over the boride layer. Boride formation was verified by X-ray diffraction (XRD) analysis indicating only the formation of the Fe2B phase. Results showed that boride samples exhibited inferior corrosion resistance compared to original samples, but after carburizing, an outer layer was formed, with the hardness and corrosion resistance like that of the original sample.

Additive manufacturing of polyethylene terephthalate glycol /carbon fiber composites: An experimental study from filament to printed parts

2018 ◽  
Vol 233 (9) ◽  
pp. 1866-1878 ◽  
Author(s):  
Isaac Ferreira ◽  
Diogo Vale ◽  
Margarida Machado ◽  
Jorge Lino
Keyword(s):  
Polyethylene Terephthalate ◽  
Fused Deposition Modeling ◽  
Raw Materials ◽  
Flexural Modulus ◽  
Microscopic Analysis ◽  
Tensile Tests ◽  
Short Fiber ◽  
Carbon Fiber Composites ◽  
Scanning Calorimetry ◽  
Fused Deposition

This research focuses on the definition and application of a characterization methodology to determine the characteristics of fused deposition modeling 3D printing materials. Commercial short fiber reinforced and unreinforced polyethylene terephthalate glycol parts were tested achieving comparison terms. The presented methodology is composed of three classes: thermal analysis, mechanical testing, and material morphology. Filament was tensile tested with specially developed setup for determining the mechanical properties of raw materials. Standardized flexural and tensile samples were printed 100% dense in both materials and tested. Differential scanning calorimetry results showed that the thermal properties of both materials do not change with successive heating cycles. Thermogravimetric analysis allowed to understand the thermal stability of materials and quantify the amount of fiber in the matrix. Tensile tests indicated that the addition of fibers increases the Young’s modulus by 70.10% but there is lesser withstanding of stress by 28.21%. Flexural tests exhibited an increase in flexural modulus of 191.38% and 5.14% in flexural strength for the reinforced polyethylene terephthalate glycol, due to the presence of fiber. Microscopic analysis revealed a 12% of void spots and fiber alignment accordingly to the deposition path.

Biodegradable 3D Printed Polymer Microneedles for Transdermal Drug Delivery

2018 ◽  
Author(s):  
Michael A. Luzuriaga ◽  
Danielle R. Berry ◽  
John C. Reagan ◽  
Ronald A. Smaldone ◽  
Jeremiah J. Gassensmith
Keyword(s):  
Drug Delivery ◽  
3D Printing ◽  
Transdermal Drug Delivery ◽  
Fused Deposition Modeling ◽  
Fused Deposition ◽  
Modeling Software ◽  
Deposition Modeling ◽  
3D Printed ◽  
Microfabrication Technique ◽  
Mechanical Strengths

Biodegradable polymer microneedle (MN) arrays are an emerging class of transdermal drug delivery devices that promise a painless and sanitary alternative to syringes; however, prototyping bespoke needle architectures is expensive and requires production of new master templates. Here, we present a new microfabrication technique for MNs using fused deposition modeling (FDM) 3D printing using polylactic acid, an FDA approved, renewable, biodegradable, thermoplastic material. We show how this natural degradability can be exploited to overcome a key challenge of FDM 3D printing, in particular the low resolution of these printers. We improved the feature size of the printed parts significantly by developing a post fabrication chemical etching protocol, which allowed us to access tip sizes as small as 1 μm. With 3D modeling software, various MN shapes were designed and printed rapidly with custom needle density, length, and shape. Scanning electron microscopy confirmed that our method resulted in needle tip sizes in the range of 1 – 55 µm, which could successfully penetrate and break off into porcine skin. We have also shown that these MNs have comparable mechanical strengths to currently fabricated MNs and we further demonstrated how the swellability of PLA can be exploited to load small molecule drugs and how its degradability in skin can release those small molecules over time.

Thermal characterization of ABS-Graphene blended three dimensional printed functional prototypes for electro chemical energy storage

2018 ◽  
Vol 1 (1) ◽  
pp. 1-11 ◽  
Author(s):  
Kamaljit Singh Boparai ◽  
Rupinder Singh
Keyword(s):  
Energy Storage ◽  
Structural Changes ◽  
Fused Deposition Modeling ◽  
Morphological Changes ◽  
Three Dimensional ◽  
Thermal Characterization ◽  
Chemical Energy ◽  
Flow Index ◽  
Fused Deposition

This study highlights the thermal characterization of ABS-Graphene blended three dimensional (3D) printed functional prototypes by fused deposition modeling (FDM) process. These functional prototypes have some applications as electro-chemical energy storage devices (EESD). Initially, the suitability of ABS-Graphene composite material for FDM applications has been examined by melt flow index (MFI) test. After establishing MFI, the feedstock filament for FDM has been prepared by an extrusion process. The fabricated filament has been used for printing 3D functional prototypes for printing of in-house EESD. The differential scanning calorimeter (DSC) analysis was conducted to understand the effect on glass transition temperature with the inclusion of Graphene (Gr) particles. It has been observed that the reinforced Gr particles act as a thermal reservoir (sink) and enhances its thermal/electrical conductivity. Also, FT-IR spectra realized the structural changes with the inclusion of Gr in ABS matrix. The results are supported by scanning electron microscopy (SEM) based micrographs for understanding the morphological changes.

An Update on the Use of Alginate in Additive Biofabrication Techniques

2019 ◽  
Vol 25 (11) ◽  
pp. 1249-1264 ◽  
Author(s):  
Amoljit Singh Gill ◽  
Parneet Kaur Deol ◽  
Indu Pal Kaur
Keyword(s):  
Fused Deposition Modeling ◽  
Low Cost ◽  
Selective Laser Sintering ◽  
Layer By Layer ◽  
Three Dimension ◽  
Anionic Polymer ◽  
Fused Deposition ◽  
The Status ◽  
Deposition Modeling ◽  
Extrusion Printing

Background: Solid free forming (SFF) technique also called additive manufacturing process is immensely popular for biofabrication owing to its high accuracy, precision and reproducibility. Method: SFF techniques like stereolithography, selective laser sintering, fused deposition modeling, extrusion printing, and inkjet printing create three dimension (3D) structures by layer by layer processing of the material. To achieve desirable results, selection of the appropriate technique is an important aspect and it is based on the nature of biomaterial or bioink to be processed. Result & Conclusion: Alginate is a commonly employed bioink in biofabrication process, attributable to its nontoxic, biodegradable and biocompatible nature; low cost; and tendency to form hydrogel under mild conditions. Furthermore, control on its rheological properties like viscosity and shear thinning, makes this natural anionic polymer an appropriate candidate for many of the SFF techniques. It is endeavoured in the present review to highlight the status of alginate as bioink in various SFF techniques.

Extrusion-Based 3D Printing for Pharmaceuticals: Contemporary Research and Applications

2019 ◽  
Vol 24 (42) ◽  
pp. 4991-5008 ◽  
Author(s):  
Mohammed S. Algahtani ◽  
Abdul Aleem Mohammed ◽  
Javed Ahmad
Keyword(s):  
Cosmetic Surgery ◽  
Fused Deposition Modeling ◽  
Personalised Medicine ◽  
Organ Transplant ◽  
Three Dimensional ◽  
Dosage Forms ◽  
Release Profile ◽  
Small Scale ◽  
Drug Release Profile ◽  
Fused Deposition

Three-dimensional printing (3DP) has a significant impact on organ transplant, cosmetic surgery, surgical planning, prosthetics and other medical fields. Recently, 3 DP attracted the attention as a promising method for the production of small-scale drug production. The knowledge expansion about the population differences in metabolism and genetics grows the need for personalised medicine substantially. In personalised medicine, the patient receives a tailored dose and the release profile is based on his pharmacokinetics data. 3 DP is expected to be one of the leading solutions for the personalisation of the drug dispensing. This technology can fabricate a drug-device with complicated geometries and fillings to obtain the needed drug release profile. The extrusionbased 3 DP is the most explored method for investigating the feasibility of the technology to produce a novel dosage form with properties that are difficult to achieve using the conventional industrial methods. Extrusionbased 3 DP is divided into two techniques, the semi-solid extrusion (SSE) and the fused deposition modeling (FDM). This review aims to explain the extrusion principles behind the two techniques and discuss their capabilities to fabricate novel dosage forms. The advantages and limitations observed through the application of SSE and FDM for fabrication of drug dosage forms were discussed in this review. Further exploration and development are required to implement this technology in the healthcare frontline for more effective and personalised treatment.

Recent Advance on Fused Deposition Modeling

2014 ◽  
Vol 7 (2) ◽  
pp. 122-130 ◽  
Author(s):  
Zhe Shi ◽  
Yonggang Peng ◽  
Wei Wei
Keyword(s):  
Fused Deposition Modeling ◽  
Fused Deposition ◽  
Deposition Modeling
Sign in / Sign up

Export Citation Format

Share Document