Conclusion Criminality and Law between the Poles of External Power and Internal Autonomy

2021 ◽  
pp. 166-176
Keyword(s):  
External Power

Equivalent Circuits of the 27.5 kV Electric Railway External Power Supply System

2020 ◽  
Vol 8 (8) ◽  
pp. 29-36
Author(s):  
Yeugene P. FIGURNOV ◽  
◽  
Yury I. ZHARKOV ◽  
Nataliya A. POPOVA ◽  
◽  
...  
Keyword(s):  
Power Supply ◽  
Power Supply System ◽  
Supply System ◽  
Equivalent Circuits ◽  
External Power ◽  
Electric Railway ◽  
External Power Supply

Organizational Dependence: An Exploration of External Power Relationships of Companies

1983 ◽  
Vol 4 (1) ◽  
pp. 19-38 ◽  
Author(s):  
Willem Koot
Keyword(s):  
The Netherlands ◽  
Active Control ◽  
External Control ◽  
Power Relationships ◽  
Control Mechanisms ◽  
Different Types ◽  
External Power ◽  
Binding Mechanisms

The concept of dependence is developed by explication of the concept used in the Aston Programme, and by elaboration from new data. Data from a study of 66 companies in The Netherlands go beyond the Aston dependence scales to construct indices for three different types of commercial binding mechanisms as used by companies: (1) striving for active control of 'partners', (2) reacting to relations of dependence, and (3) safeguarding production rationality. Mintzberg's hypothesis regarding external control is tested and a new one regarding commercial ties and autonomy is offered. The existence of a large variety of interorganizational control mechanisms is em phasized.

Study on the Development of Lighting Devices Material Combined with Street Lamp in the Use of Rays of the Sun

2017 ◽  
Vol 864 ◽  
pp. 224-228
Author(s):  
Seung Hyeon You ◽  
Jeong Hwan Lee ◽  
Sung Hoon Oh
Keyword(s):  
Power Supply ◽  
Economic Value ◽  
The Sun ◽  
Led Light ◽  
Lighting Device ◽  
The Future ◽  
Street Lamp ◽  
External Power ◽  
The City

This study has developed street lamp lighting device material that was turned on and off by self-power supply without additional power by using the rays of the sun. Lighting devices have been applied with polycarbonate materials that were outstanding with light transmissivity while using LED light and economic value. Lighting devices are easily installed in various places since external power is not necessary. In addition, it also serves as a function of preventing crime by acquiring intensity of illumination in crime-ridden district in the night. Lighting device can also serve as a function of improving fine view in the city by establishing eco-friendly circumstances including parks, areas around shopping district, and housing areas after being manufactured in the form of flowerpot where can grow plants in the future.

After the Ivory Tower: Gender, Commodification and the ‘Academic’

1997 ◽  
Vol 55 (1) ◽  
pp. 130-142 ◽  
Author(s):  
Joanna de Groot
Keyword(s):  
Job Insecurity ◽  
Historical Context ◽  
Ivory Tower ◽  
Academic Identities ◽  
Loss Of Autonomy ◽  
External Power ◽  
Key Features ◽  
And Control ◽  
Radical Transformation ◽  
Do So

This piece uses a feminist approach to explore various aspects of ‘commodification’ in the lives and work of those teaching and researching in UK universities, and in particular its gender dimensions. After setting a historical context for the radical transformation of UK universities during the 1980s, it considers how this transformation was experienced by academics in terms of alienation, anxiety and accountability. Key features of that experience are loss of autonomy and control to the external power of competition and managerialism, insecurity and casualization in employment, and exposure to increasing judgemental scrutiny. For women academics job insecurity and discrimination continue to be disproportionately important, although some of the challenges to old established academic convention and practice have opened up real possibilities to progress more pro-women agendas. In the future they will confront quite depressing developments in the reconstruction of academic identities and labour, but have the legacy of the gains/insights of feminist analysis and politics over the last twenty years with which to do so.

The Measurement of the Thickness of Metal Walls from One Surface Only, by an Electrical Method

1938 ◽  
Vol 140 (1) ◽  
pp. 349-398 ◽  
Author(s):  
B. M. Thornton ◽  
W. M. Thornton
Keyword(s):  
Potential Drop ◽  
Engineering Industry ◽  
Steel Plates ◽  
Electrical Method ◽  
Order Of Accuracy ◽  
Iron Castings ◽  
Engine Cylinder ◽  
External Power ◽  
Metal Wall ◽  
Core Shift

There is a definite need in the engineering industry for an instrument which will determine accurately the thickness of a metal wall from one side only, and which is portable, robust, independent of external power supply, and easy to operate. The instrument described in the paper fulfils all these conditions. The method is essentially that of comparing the resistance of a metal wall under test with that of a similarly shaped wall of the same material, of which the thickness is known. Current, usually under 10 amp., is supplied by a 6- or 12-volt battery to two current contacts held against the wall and usually spaced 2 or 3 inches apart. The current in the circuit is adjusted by varying the rheostat or the number of cells of the small car-battery employed, until the very small potential drop indicated by the deflexion of a galvanometer connected to two potential contacts reaches a predetermined fixed value. From a calibration curve the thickness of the wall corresponding to the current registered by the ammeter is determined. The contacts are made on the plates whose thickness is to be measured by means of Evershed and Vignoles spring-controlled rotating points that were originally designed for a four-point method of working. The flexible leads from these, sometimes 100 but usually 30 feet long, are rubber-covered, and are connected to the circuit in the box by plugs and sockets. These are removed for transport and carried in a separate box. The instrument was originally designed for measuring the thickness of boiler tubes, and examples are given showing that its accuracy in this respect is within a few thousandths of an inch. It was found in practice that the instrument could be used to measure the thickness of mild steel plates up to 1·25 inches and of iron castings, up to 3 inches, with the same order of accuracy. It is also used for the measurement of engine cylinder walls to detect core shift. Examples of these are given in the paper. One notable case was that of the examination of a bank of superheater tubes in a boiler that had given much trouble due to the use of an unsuitable chain-grate stoker. Thinned tubes were at once detected and on being cut out the thicknesses indicated by the instrument were confirmed. Examples are given of the regular use of the instrument in determining the thickness of boiler and superheater tubes, ships' hull plates, tank wagons, and various iron castings that were accessible from one side only.

Growing controversy over “wise international water governance”

2004 ◽  
Vol 49 (7) ◽  
pp. 61-66
Author(s):  
J.M. Trondalen
Keyword(s):  
Policy Development ◽  
Water Governance ◽  
Lessons Learned ◽  
Political Climate ◽  
Trade Offs ◽  
Political Relationships ◽  
External Power ◽  
International Water ◽  
Principles And Standards ◽  
Political Economic

This article takes the perspective that when political relationships are strained, there seem to be few examples of wise international water resources governance. The Middle East is a striking example. Much effort has been put into policy development and the design of international principles, but very little into the translation of those into concrete and lasting governance. One of the theses of the article is that politics - whether domestic or international- in most cases overrides these principles and standards. Moreover ready-made regional co-operation models of water managements are not directly applicable to every geographical, political, economic and social setting. Certain factors are often under-estimated in international water negotiations, such as:• the complexity of any hydro-political negotiations, and need to develop commonly accepted standards;• the difficulty of translating policy - either politically or legally - into an operational and realistic negotiations strategy;• the format of the procedures and meetings;• recognition that third parties should have a long-term perspective on any conflict they get involved in.With reservations, the lessons learned indicate that the following factors have an impact on grid locked situations, such as: new substantive information; new trade-offs between the parties; and changed political climate or relationship with external power-brokers.

Researches on the Flood Protection and Anti-Seismic Self-Help Bed

2014 ◽  
Vol 945-949 ◽  
pp. 393-396
Author(s):  
Jia Bin Lu ◽  
Hong Sheng Zhao ◽  
Xin Lei Guo
Keyword(s):  
Power Supply ◽  
Flood Control ◽  
Flood Protection ◽  
Storage Battery ◽  
Protection Device ◽  
Personal Safety ◽  
Circular Arch ◽  
Self Help ◽  
External Power ◽  
And Storage

In recent years, floods and earthquakes occur frequently and cause great threats and harm to personal safety. On the basis of my patent named anti-seismic bed, which patent id is 200920287683.8, the flood control and anti-seismic bed is proposed. The anti-seismic bed doesn’t need external power supply and storage battery. When an earthquake occurs, the protection device starts and then an circular arch are formed by rotating protection boards. people are protected in bed body in 0.765s. When floods occur, flood protection airbag is filled with gas and launched by the Atmel89C52 microprocessor and YDE-WDT-P sensors. Bed body can float in the flood. Its functions are similar to the rescue boat and can protect human life’s safety.

scholarly journals Design and research on the function of lithium-ion batteries emergency traction system for rail vehicles

2018 ◽  
Vol 10 (12) ◽  
pp. 168781401881229
Author(s):  
Xiaoming Xu ◽  
Xudong Sun ◽  
Qiaolian Zhou ◽  
Xinhua Jiang ◽  
Donghai Hu ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Power Supply ◽  
Lithium Ion ◽  
Urban Rail ◽  
Entire Line ◽  
Emergency Power ◽  
External Power ◽  
Traction Power Supply ◽  
Traction System ◽  
Traction Power

Urban rail vehicle power supply short interruptions or prolonged paralysis situation sometimes occurs, which will cause the entire line outage. If the train through the battery to achieve emergency traction, it will be able to effectively solve the problem of train interval stop due to external power supply reasons. This article proposes an emergency traction system, using lithium-ion batteries as traction power, carrying out the design and research on the function of lithium-ion emergency traction system for rail transit vehicles. Through the design of the power supply system, the design of the emergency traction power supply, the design of the conversion control and safety protection circuit, the design of the traction system, and the design of the auxiliary system, the train can be run to the next station under the emergency power supply, and the effectiveness of the scheme is verified by simulation. Moreover, the transformation on the basis of the existing Shanghai 952 train illustrates the feasibility of the existing train to achieve the emergency traction function and provides guarantee for the safe operation of the train.

scholarly journals Detachable Robotic Grippers for Human-Robot Collaboration

2021 ◽  
Vol 8 ◽  
Author(s):  
Zubair Iqbal ◽  
Maria Pozzi ◽  
Domenico Prattichizzo ◽  
Gionata Salvietti
Keyword(s):  
Degrees Of Freedom ◽  
Tactile Feedback ◽  
Industrial Robots ◽  
Physical Interaction ◽  
Robot Arm ◽  
Robotic Hands ◽  
End Effector ◽  
External Power ◽  
Self Powered ◽  
Automatic Tool

Collaborative robots promise to add flexibility to production cells thanks to the fact that they can work not only close to humans but also with humans. The possibility of a direct physical interaction between humans and robots allows to perform operations that were inconceivable with industrial robots. Collaborative soft grippers have been recently introduced to extend this possibility beyond the robot end-effector, making humans able to directly act on robotic hands. In this work, we propose to exploit collaborative grippers in a novel paradigm in which these devices can be easily attached and detached from the robot arm and used also independently from it. This is possible only with self-powered hands, that are still quite uncommon in the market. In the presented paradigm not only hands can be attached/detached to/from the robot end-effector as if they were simple tools, but they can also remain active and fully functional after detachment. This ensures all the advantages brought in by tool changers, that allow for quick and possibly automatic tool exchange at the robot end-effector, but also gives the possibility of using the hand capabilities and degrees of freedom without the need of an arm or of external power supplies. In this paper, the concept of detachable robotic grippers is introduced and demonstrated through two illustrative tasks conducted with a new tool changer designed for collaborative grippers. The novel tool changer embeds electromagnets that are used to add safety during attach/detach operations. The activation of the electromagnets is controlled through a wearable interface capable of providing tactile feedback. The usability of the system is confirmed by the evaluations of 12 users.

Sign in / Sign up

Export Citation Format

Share Document