scholarly journals Peanut Yield Potential as Influenced by Cropping System and Plant Density

1996 ◽  
Vol 23 (2) ◽  
pp. 129-133
Author(s):  
P. E. Igbokwe ◽  
N. V. K. Nkongolo
Keyword(s):  
Seed Weight ◽  
Plant Density ◽  
Cropping System ◽  
Dry Weight ◽  
Yield Potential ◽  
Plant Spacing ◽  
Seed Number ◽  
Vetiveria Zizanioides ◽  
Shoot Dry Weight ◽  
Pod Number

Abstract This study was conducted on a Memphis silt loam at Alcorn State University in 1992 and 1993 and investigated row-intercropping as a low-input alternative to the conventional cropping system for peanut (Arachis hypogaea L.) production in southwestern Mississippi. Extractable P and exchangeable cations were significantly (P ≤ 0.05) higher for vetiver-peanut row-intercropping in 1992. Extractable S and P were significantly (P ≤ 0.05) higher for vetiver-peanut row-intercropping and conventional peanut monocropping, respectively, in 1993. Plant height, shoot dry weight, the number of yellow nutsedge (Cyperus esculentus L.) per row, insect lesions per leaflet, and rodent diggings per row were significantly (P ≤ 0.05) higher for conventional peanut monocropping than when peanut was intercropped with vetiver grass [Vetiveria zizanioides (L.) Nash]. Peanut pod number, pod weight, seed number, and seed weight also were higher for conventional peanut monocropping. The seed mineral composition generally was not affected by cropping system and plant spacing. Peanut yield was higher for 15.2 cm within-row plant spacing compared to 10.2- and 20.3-cm spacings investigated in this study. Interaction between cropping system and plant spacing was significant for pod number, pod weight, seed number, seed weight, and seed Ca and Fe compositions in 1992, but only significant for seed number, seed weight, and seed Fe and Zn compositions in 1993.

scholarly journals Sowing Date and Rate Effect on Winter Oilseed Rape (Brassica napus L.) Yield Components’ Formation

2016 ◽  
Vol 70 (6) ◽  
pp. 384-392 ◽  
Author(s):  
Oskars Balodis ◽  
Zinta Gaile
Keyword(s):  
Oilseed Rape ◽  
Yield Components ◽  
Seed Weight ◽  
Plant Density ◽  
Plant Productivity ◽  
Sowing Date ◽  
Individual Plant ◽  
Seed Number ◽  
Winter Oilseed Rape ◽  
Pod Number

Abstract Crop yield per area is the product of plant density and productivity of an individual plant. Plant density and the time of winter oilseed rape sowing influences yield components (parameters of individual plant productivity), such as pod number per plant, seed number per pod, plant productivity, seed weight, and plant branching. The aim of this three-year (2008–2010) study was to investigate winter oilseed rape yield components depending on sowing date (five sowing dates) and sowing rate (four sowing rates for each variety) as initial cause of plant density at harvest for two type winter oilseed rape varieties (open pollinated ‘Californium’ and hybrid ‘Excalibur’). Field trials were carried out at the Research and Study Farm “Vecauce” of the Latvia University of Agriculture. Winter oilseed rape yield components (pod number per plant and seed number per pod, plant productivity (seed number per plant and plant productivity in g) as well as the number of primary branches per plant) were affected (p < 0.05) by sowing date and rate for both varieties. In general, no significant effect of sowing rate on 1000-seed weight was observed (p > 0.05), but sowing date influenced this component significantly (p < 0.05). A yield compensation mechanism was demonstrated by significant (p < 0.05) negative correlations between plant density at harvest and parameters of individual plant productivity.

Effects of Plant Density and Thinning on High-Yielding Dry Beans (Phaseolus vulgaris) in Mexíco

1977 ◽  
Vol 13 (4) ◽  
pp. 325-335 ◽  
Author(s):  
Aguilar M. Immer ◽  
R. A. Fischer ◽  
Joshue Kohashi S.
Keyword(s):  
Phaseolus Vulgaris ◽  
Leaf Area ◽  
Seed Weight ◽  
Plant Density ◽  
Plant Competition ◽  
Growth And Yield ◽  
Positive Relation ◽  
Dry Beans ◽  
Leaf Area Duration ◽  
Pod Number

SUMMARYThe influence of leaf area and inter-plant competition on the growth and yield of a crop of high-yielding dry beans (Phaseolus vulgaris L.) in central Mexico was studied, using density and thinning treatments. The highest seed yield (4210 kg/ha at 14% moisture) was obtained with the highest density (28·8 plants/m2). Thinning showed that pods/plant was sensitive to inter-plant competition between 36 and 78 days after seeding (first flower at 50 days), but seeds/pod, and especially seed weight, were not sensitive. It is suggested that the close positive relation between yield and leaf area duration derives from the influence of photosynthate supply upon pod number.

scholarly journals Action of growth regulators on production of soybean cultivar Davis

1981 ◽  
Vol 38 (1) ◽  
pp. 127-138 ◽  
Author(s):  
Paulo R.C. Castro ◽  
Roberto S. Moraes
Keyword(s):  
Glycine Max ◽  
Gibberellic Acid ◽  
Growth Regulators ◽  
Seed Weight ◽  
Dry Weight ◽  
Soybean Plant ◽  
Trimethylammonium Chloride ◽  
Seed Number ◽  
Exogenous Growth ◽  
Soybean Plants

This research deals with the effects of exogenous growth regulators on production of soybean plant (Glycine max cv.. Davis) under greenhouse conditions, At the flower anthesis, 2,3,5-triiodobenzoic acid (TIBA) 20 ppm was applied. Other two applications with TiBA, with intervals of four days, were realized. Before flowering, Agrostemin (1 g/10 ml/3 1), gibberellic acid (GA) 100 ppm, and (2-chloroethyl) trimethylammonium chloride (CCC) 2,000 ppm were applied. It was observed that CCC and TIBA reduced stem dry weight. Soybean plants treated with TIBA reduced weight of pods without seeds , seed number and seed weight.

Effects of seed size and seed weight on seedling establishment, seedling vigour and tolerance of summer turnip rape (Brassica rapa) to flea beetles, Phyllotreta spp.

2007 ◽  
Vol 87 (2) ◽  
pp. 385-393 ◽  
Author(s):  
R. H. Elliott ◽  
L. W. Mann ◽  
O. O. Olfert
Keyword(s):  
Seed Size ◽  
Brassica Rapa ◽  
Seedling Establishment ◽  
Seed Weight ◽  
Flea Beetle ◽  
Dry Weight ◽  
Seedling Vigour ◽  
Shoot Dry Weight ◽  
Flea Beetles ◽  
Beetle Damage

A 3-yr study was conducted on three synthetic Brassica rapa L. cultivars to determine the effects of seed size and seed weight on seedling establishment, seedling growth and susceptibility to feeding damage by flea beetles, Phyllotreta spp. (Coleoptera: Chrysomelidae). Seed lots of AC Boreal, Fairview and Hysyn 110 were sieved to obtain small, medium and large seeds (1.4–1.6, 1.6–1.8 and 1.8–2.0 mm, respectively). In the laboratory, seedlings grown from large seeds had the largest cotyledons, highest shoot dry weight and highest biomass. Shoot weights increased as seed size increased. Sized seeds of the three cultivars were grown in the field without insecticides in 1998–2000. Seedlings of small seeds had the highest flea beetle damage and poorest seedling establishment. Shoot dry weight and biomass 14–35 d after planting increased as seed size and seed weight increased. Compared with small seeds, large seeds improved shoot dry weight, biomass and seed yield by 13–43, 25–57 and 12%, respectively. Results indicated that seedlings of medium and large seeds are more vigorous and tolerant to flea beetle damage than seedlings of small seeds. Tolerance was due to a higher initial seedling weight rather than higher relative growth rate. Shoot dry weights, biomass and yield of the three cultivars were more strongly correlated with 1000-seed weight than with seed diameter. Key words: Canola, flea beetles, seed size, seedling vigour, tolerance, seed weight

Yield response of narrow-leafed lupin plants to variations in pod number

1998 ◽  
Vol 49 (1) ◽  
pp. 63 ◽  
Author(s):  
J. A. Palta ◽  
C. Ludwig
Keyword(s):  
Seed Size ◽  
Seed Yield ◽  
Plant Density ◽  
Yield Response ◽  
Seed Number ◽  
Subsequent Removal ◽  
Seed Filling ◽  
Specific Number ◽  
Pod Number ◽  
Number Of Seeds

The effect of pod number on the seed yield and components of seed yield was examined for narrow-leafed lupin (Lupinus angustifolius L.) grown at a plant density of 36 plants/m2 in both the glasshouse and the field. Diflerent numbers of pods per plant in the glasshouse-grown lupin were generated by the application of N6-benzylaminopurine (BAP) to a specific number of flowers to ensure artificially that they set pods, and the subsequent removal of the remaining untreated flowers. Pod number ranged from 6 to 65 pods/plant in the glasshouse and was naturally distributed from 2 to 22 pods/plant in the field. Increases in seed yield per plant occurred as pod number per plant increased from 2 to 30 pods. No further increases in seed yield resulted when pod number per plant increased from 30 to 55 pods. Seed yield per plant was depressed as pod number increased from 55 to 65 pods. Seed size fell as pod number per plant increased over 20 pods and was less affected once the number of seeds per pod was reduced. The reduction in seed number per pod resulted from an increase in the number of seeds that aborted during seed filling. The data suggest that at a plant density of 36 plants/m2 there is potential for improving seed yield per plant by increasing the number of pods that reach maturity, provided it does not exceed 30 pods/plant. However, if consideration is given to producing large seeds, often preferred by buyers, the number of pods per plant should not exceed 20 pods.

The optimum foliar zinc source and level for improving Zn content in seed of chickpea

2015 ◽  
Vol 38 (6) ◽  
Author(s):  
Nihal Kayan ◽  
Nurdilek Gulmezoglu ◽  
Mehmet Demir Kaya
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Harvest Index ◽  
Foliar Application ◽  
Seed Number ◽  
Plant Seed ◽  
Zn Content ◽  
Pod Number

The comparative effect of 0, 0.2, 0.4, 0.6 and 0.8% Zn levels of zinc chelate (Zn-EDTA; 8% Zn) and zinc sulfate (23% Zn) applied as foliar sprays for assuaging zinc deficiency of chickpea cv. Gökçe was evaluated under field condition. The sprays were applied on the plants before blooming stage during 2012 and 2013 growing seasons and seed yield, yield components like plant height, pod number per plant, seed number per plant, hundred seed weight, harvest index and mineral concentrations (nitrogen, phosphorus, zinc and iron) in seeds were investigated. Plant height, pod number per plant, seed number per plant, hundred seed weight, harvest index and seed yield were investigated. The results showed that increased zinc doses caused an increase in Zn content of seed, while seed yield was not affected similarly. In general, plant height, pod number and seed number per plant increased by the application of zinc. Lower dose of Zn-EDTA and higher dose of ZnSO<sub>4</sub> gave higher yield components. Seed weight, harvest index and seed yield were not significantly influenced by Zn sources and doses; however, mineral concentration of seeds enhanced when Zn doses were increased. It was concluded that foliar application of zinc resulted in an increase in seed mineral contents rather than seed yield of chickpea. The dose of 0.6% with Zn-EDTA was the optimum combination for Zn enrichment in seed of chickpea.

Performances of groundnut varieties under sub-tropical climate of North East Hilly Agro-Ecological Region of India

2016 ◽  
Vol 39 (2) ◽  
Author(s):  
M. Datta ◽  
G. S. Yadav ◽  
S. Chakraborty
Keyword(s):  
Seed Weight ◽  
Block Design ◽  
Dry Weight ◽  
Tropical Climate ◽  
Yield Potential ◽  
High Yield ◽  
North East ◽  
Randomized Block Design ◽  
Stover Yield ◽  
Ecological Region

North east hilly eco-region of India is characterized by highly undulating topography and fragile ecology. Here the cultivation of rice on upland and medium land is not a profitable venture to farmers. Therefore, to find out alternative crop with high yield potential cultivars a three year field study from 2008 to 2010 on agronomic evaluation of groundnut cultivars under sub-tropical climate of North East hilly Agro-ecological region was carried out. The experiment consists of fourteen groundnut cultivars (V<sub>1</sub>- ICGS-76, V<sub>2</sub>- GG-2, V<sub>3</sub>- GG-13,V<sub>4</sub>-TG 37 A, V<sub>5</sub>-FeESG-10, V<sub>6</sub>-FeESG-8,V<sub>7</sub>-K-134,V<sub>8</sub>-GG-6,V<sub>9</sub>-SB XI, V<sub>10</sub> GG-11,V<sub>11</sub>-KAUSHAL,V<sub>12</sub>-GG-4,V<sub>13</sub>-GG-2,V<sub>14</sub>-GG-8) as treatment in randomized block design and replicated thrice. Results revealed that highest plant dry weight was produced by cultivar “KAUSHAL” (32.99 g/plant), while lowest was recorded with cultivar “FeESG-10” (16.32 g/plant). However, the highest numbers of pod (25.32) were observed with “ICGS-76”. Cultivar GG-11 had produced highest pod and seed weight (34.80 g/plant and 20.62 g/plant, respectively) as compared to other cultivars, while lowest pod and seed weight (8.96 g/plant and 6.39 g/plant, respectively) with “FeESG-8”. Maximum pod yield (2.06t/ha) was produced by GG-11 cultivars, although highest stover yield (2.37 t/ha) was produced in cultivar KAUSHAL. Cultivar GG-11 had also recorded highest shelling percentage. Therefore, it is suggested that GG-11 a better option for substituting the upland and medium land rice during kharif season for enhancing the farmer’s income.

Yield losses caused by virus infection in four combinations of non-persistently aphid-transmitted virus and cool-season crop legume

2004 ◽  
Vol 44 (1) ◽  
pp. 57 ◽  
Author(s):  
L. J. Latham ◽  
R. A. C. Jones ◽  
B. A. Coutts
Keyword(s):  
Virus Infection ◽  
Mosaic Virus ◽  
Seed Yield ◽  
Faba Bean ◽  
Seed Weight ◽  
Dry Weight ◽  
Yield Losses ◽  
Cool Season ◽  
Individual Seed ◽  
Shoot Dry Weight

Field experiments provided quantitative information on the yield losses caused by virus infection within 4 different combinations of non-persistently aphid-transmitted virus and cool-season crop legume: Alfalfa mosaic virus (AMV) in chickpea, faba bean and lentil, and Cucumber mosaic virus (CMV) in lentil. Virus infection foci were introduced into plots and naturally occurring aphids spread infection from these to the other plants. Plants were tagged individually when typical virus symptoms first appeared during the growing period. Paired plant comparisons between symptomatic and asymptomatic plants were made to measure different yield loss parameters. Late infection with AMV in faba bean cv. Fiord diminished shoot dry weight by 41% and seed yield by 45%, but plants infected earlier recovered sufficiently from their initial shock reaction not to produce significant yield losses. In plants of lentil cv. Matilda first showing symptoms at different times, infection with AMV decreased shoot dry weight by 74–76%, seed yield by 81–87% and individual seed weight by 10–21%, while CMV diminished shoot dry weight by 72–81%, seed yield by 80–90% and individual seed yield by 17–25%. Early infection with AMV killed plants of chickpea cv. Tyson while later infection decreased shoot dry weight by 50%, seed yield by 98% and individual seed weight by 90%. The first tentative evidence for seed transmission of AMV in faba bean is reported with a transmission rate of 0.04%.

scholarly journals Simulated mesotrione drift followed by glyphosate, imazethapyr, bentazon or glyphosate plus chlorimuron in soybean

2009 ◽  
Vol 89 (2) ◽  
pp. 265-272
Author(s):  
L. R. Brown ◽  
D. E. Robinson ◽  
K. Chandler ◽  
C. J. Swanton ◽  
R. E. Nurse ◽  
...  
Keyword(s):  
Glycine Max ◽  
Key Words ◽  
Plant Height ◽  
Seed Yield ◽  
Plant Density ◽  
Dry Weight ◽  
Shoot Dry Weight ◽  
Glycine Max L ◽  
Herbicide Drift

There have been anecdotal accounts of increased crop sensitivity due to herbicide drift followed by an in-crop herbicide. An experiment was conducted from 2005 to 2007 at Elora, Ridgetown, and Woodstock, Ontario, to determine the effects of simulated mesotrione drift followed by in-crop applications of glyphosate, imazethapyr, bentazon and glyphosate plus chlorimuron on glyphosate-resistant soybean [Glycine max (L.) Merr.] visual injury, plant height, plant density, shoot dry weight, and seed yield. As the rate of simulated mesotrione drift increased, there was an increase in soybean injury and a decrease in shoot dry weight, height, and yield. Simulated mesotrione drift followed by bentazon resulted in synergistic responses in injury shortly after application in some environments. This increase in injury was transient, with no synergistic responses in density, shoot dry weight, and yield. In contrast, antagonistic responses were observed when glyphosate, imazethapyr, or glyphosate plus chlorimuron were applied after simulated mesotrione drift in some environments. Further research is required to develop a better understanding of the interactions of drift followed by the application of an in-crop herbicide. Key words: Bentazon, chlorimuron, glyphosate, imazethapyr, mesotrione, synergism

scholarly journals Effect of water hyacinth compost on the morpho-physiological parameters of Soybean (Glycine max l.)

2021 ◽  
Vol 2 (1) ◽  
pp. 084-095
Author(s):  
Ogbuehi HC ◽  
Ibe PK
Keyword(s):  
Glycine Max ◽  
Leaf Area ◽  
Plant Height ◽  
Water Hyacinth ◽  
Seed Weight ◽  
Dry Weight ◽  
Effect Of Water ◽  
Shoot Dry Weight ◽  
Glycine Max L ◽  
Number Of Leaves

A pot experiment was conducted under rainfed condition to study the effect of water hyacinth compost on the morpho-physiological parameters of soybean (Glycine max L.) at the Teaching and Research Farm of Faculty of Agriculture and Veterinary Medicine, Imo State University, Owerri. The treatments were control (T1) 100g (T2), 150g (T3) and 200g (T4) of water hyacinth compost and replicated four times. The treatments were arranged in Complete Randomized Design (CRD). The parameters measured were plant height, number of leaves, leaf area (cm2), leaf area index, relative growth rate (RGR), Net assimilation rate (NAR), shoot dry weight(g), yield and yield components (Number of pods, pods weight, 100 seed weight). The results obtained indicated that T3 significantly produced highest plant height (57.6cm) compare to control. While it was observed that T4 (200g) significantly produced the highest number of leaves (233.25), leaf area (631.80cm2), shoot dry weight (15.445g), number of pods (129.75), pod weights (25.38g) seed weight (7.23g) and yield (0.72kg/ha) relative to control and other treatment levels. Root parameters were also significantly improved by the rates of water hyacinth application compared to control. It will be worthy to note that there was no nodulation perhaps that was why the yield was poor. The results showed that soybean growth can effectively be improved with incorporation of water hyacinth into soil.

Sign in / Sign up

Export Citation Format

Share Document