scholarly journals X-ray Technology to Determine Peanut Maturity1

2020 ◽  
Vol 47 (2) ◽  
pp. 38-45
Author(s):  
R.B. Sorensen ◽  
C.L. Butts ◽  
M.C. Lamb
Keyword(s):  
Linear Response ◽  
Background Color ◽  
Current Standard ◽  
Economic Return ◽  
X Ray ◽  
Arachis Hypogaea L ◽  
Power Detector ◽  
Maturity Class ◽  
The Relationship ◽  
Non Destructive

ABSTRACT Indeterminate growth of peanut (Arachis hypogaea L.) creates indecision for best digging date for maturity and economic return. The current standard to determine peanut maturity is the Hull Scrape method. This method uses human observations to place hull scraped peanuts on a color maturity profile board. Human observations may lack precision and repeatability from individual to individual. X-ray technology has the capability of viewing peanut kernels through the hull to possibly ascertain density and maturity. The objective was to determine if x-ray could be used as a quick, non-destructive, and repeatable method to determine peanut maturity of runner, spanish, and virginia market types. Fresh dug peanut pods had 25 percent greater peanut area and gray scale values compared with hull scraped pods (runner and virginia only) and showed no difference in x-ray value between immature and fully mature peanut. Dried peanut showed a linear response of x-ray value versus peanut maturity (hull color). Virginia market type had much higher x-ray values followed by runners, then spanish. The relationship between peanut maturity and x-ray value peaked at the Orange class for runners (Georgia-06G, Georgia-13M), and Spanish (AT9899) while virginia (Georgia-11J) tended to peak at the Brown class. This research demonstrated that x-ray technology may be used to measure peanut density and possible maturity but needs further examination past Orange and Brown maturity class. Final x-ray values determined by this proprietary x-ray equipment may not be transferable due to specific x-ray power, detector precision, background color/scatter, and other electronic nuances.

scholarly journals Can Peg Strength Be Used as a Predictor for Pod Maturity and Peanut Yield?

2015 ◽  
Vol 42 (2) ◽  
pp. 92-99 ◽  
Author(s):  
R.B. Sorensen ◽  
M.C. Lamb ◽  
C.L. Butts
Keyword(s):  
Sample Size ◽  
Small Difference ◽  
Large Sample Size ◽  
Current Standard ◽  
Color Chart ◽  
Large Sample ◽  
Harvest Dates ◽  
Arachis Hypogaea L ◽  
Peanut Cultivars ◽  
The Relationship

Abstract Mesocarp hull color is the current standard to estimate digging date and peanut (Arachis hypogaea, L.) maturity with acceptable yield and grade. Subjectivity of pod color and pod placement on a color chart may give a false indication of when to dig peanuts. The objective was to determine if peg strength could be used to predict pod maturity, digging date, and resultant peanut yield. Peanut peg strength was collected for two years (2011 and 2012) on three peanut cultivars (Georgia-06G, Georgia-09B, and Tifguard), at multiple plant dates (2012 only) and multiple harvest dates to determine the relationship between peg strength versus pod maturity, peanut loss, and peanut yield. Peg strength was determined using an electronic force gage that would measure peak force. Average peg strength was different for all three cultivars with Georgia-06G having the greatest average peg strength followed by Georgia-09B, and Tifguard. In general, peanut yields were greater at early plant and harvest dates and decreased with time. Conversely, peanut pod loss was lower with early plant and harvest dates but increased with later harvest dates. There was a strong positive linear relationship between peg strength and peanut yield for each cultivar. However, there was a relatively small difference with peg strength values between the maximum and minimum peanut yield. There was no relationship between peg strength and mesocarp color (pod maturity, R2 = 0.007). Small differences in peg strength and the non-relationship between peg strength and pod maturity implies: 1) a large sample size would be needed to predict peanut yield, 2) the large sample size would increase time and manpower to determine average peg strength values, and 3) peg strength was not a valid criteria to determine pod maturity or predict digging date. Overall, peg strength may be useful to describe cultivar characteristics but may not be sufficiently robust to predict pod maturity digging date, or peanut yield.

X-ray microtomography study of otic capsule deficiencies: three-dimensional modelling of the fissula ante fenestram

2015 ◽  
Vol 129 (9) ◽  
pp. 840-851 ◽  
Author(s):  
J W Lee ◽  
P Sale ◽  
N P Patel
Keyword(s):  
Inner Ear ◽  
Three Dimensional ◽  
Oval Window ◽  
Otic Capsule ◽  
X Ray ◽  
Otologic Surgery ◽  
Science Group ◽  
Temporal Bones ◽  
The Relationship ◽  
Non Destructive

AbstractBackground:The postulated sites of perilymph fistulae involve otic capsule deficiencies, in particular, at the fissula ante fenestram. Histological studies have revealed this to be a channel extending from the middle ear, and becoming continuous with the inner ear medial to the anterior limit of the oval window. The relationship between a patent fissula and symptoms of perilymph fistula is contentious.Objective:The understanding of the anatomy of the fissula ante fenestram is incomplete. Histopathology is inherently destructive to the delicate ultrastructure of the middle and inner ear. Conversely, X-ray microtomography allows non-destructive examination of the otic capsule. In this study, we used X-ray microtomography to characterise the fissula ante fenestram.Materials and methods:We imaged cadaveric temporal bones with X-ray microtomography. We used the Avizo Fire (Visualization Science Group, Merignac Cedex, France) software to perform post-processing and image analysis.Results:Three-dimensional modelling of the fissula ante fenestram allowed stratification into four forms: rudimentary pit; partial fissula; complete occluded fissula; and complete patent fissula.Conclusion:X-ray microtomography showed that the fissula ante fenestram is present in various forms from rudimentary pit to complete deficiency of the otic capsule. This understanding may have implications for otologic surgery and clinical diagnosis of perilymph fistula.

scholarly journals An analysis of geochemical features of crystallization of emeralds as an approach to determine the deposit of them

2021 ◽  
pp. 16-21
Author(s):  
POPOV Мikhail Petrovich ◽  
◽  
SOLOMONOV Vladimir Ivanovich ◽  
SPIRINA Аl’fiya Vilikovna ◽  
IVANOV Мikhail Alekseevich ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Alkali Metals ◽  
Additional Method ◽  
Impurity Composition ◽  
X Ray ◽  
Fluorescent Analysis ◽  
Impurity Elements ◽  
The Relationship ◽  
Non Destructive ◽  
Main Impurity

Relevance. It is known that minerals differ in morphology, features of the internal structure of crystals, chemical composition, etc., depending on the conditions of their formation and existence. These geochemical features of the gems crystallization are an important criterion for determining their deposit. In this paper, the impurity composition of the samples of emeralds from the deposits of Brazil, China, Zambia, Russia, Afghanistan, Colombia, and Tanzania was investigated by X-ray fluorescent analysis. The study of the impurity composition of emeralds by a non-destructive method and the construction of analytical dependences can be used as an additional way for determining the deposit of emeralds. Purpose of the work is the study of chemical composition of emeralds by X-ray fluorescent analysis to establish the relationship between the content of the main impurity elements and the deposit. Results. The data on the impurity composition of emeralds obtained by X-ray fluorescent analysis show that the content of impurities of Na, K, Rb, Cs, Mg, Fe, V, Cr differs from one deposit to another. The content of impurities of alkali metals and magnesium is higher in the samples from the shale-type deposits compared to the samples from deposits of the Colombian type. Thus, at the first stage, the type of deposit can be assumed. Further, the dependences plotted in the coordinate planes {Cr, V}, {Cs, Cr}, {Fe, Cr} show separate areas, delimited by the impurity ratios, which are typical for the samples from deposits in China, Colombia, Zambia, Afghanistan, and Tanzania. Conclusion. X-ray fluorescent analysis, as a non-destructive method for studying emeralds, is considered to be a promising approach to identifying their deposit, but as an additional method.

scholarly journals Investigation of the application of phase contrast imaging using a point X-ray source to industrial non-destructive testing

2014 ◽  
Vol 372 (2010) ◽  
pp. 20130036 ◽  
Author(s):  
Kazuaki Suzuki ◽  
Ian Haig
Keyword(s):  
Phase Contrast ◽  
Intensity Variation ◽  
Test Sample ◽  
X Rays ◽  
Non Destructive Testing ◽  
Contrast Imaging ◽  
Current Standard ◽  
Destructive Testing ◽  
X Ray ◽  
Non Destructive

X-Tek Systems, a division of Nikon Metrology UK, designs, develops and manufactures microfocus X-ray radiography and computed tomography systems for industrial non-destructive testing. The range of X-ray acceleration voltages of its current standard products is 130–450 kV. It is widely known that X-ray images can be created using phase contrast formed by the natural propagation of X-rays. Simulation of the natural propagation of X-rays through a cylindrical test sample predicted a small contrast peak at the boundary between the cylinder material and air. Comparison data were obtained using an X-ray source with acceleration voltage above 100 kV. The simulation results correlated well with the experimental data. A further practical example (a ‘magic mirror’ amulet from an old Japanese shrine) is introduced and discussed. In this specimen, we detected intensity variation including the effect of phase contrast in the operating region above 100 kV. In summary, natural propagation phase contrast was observed in radiographic images from a standard point X-ray source with acceleration voltages exceeding 100 kV.

Accuracy of dual energy X-ray absorptiometry, weight, longissimus lumborum muscle depth and GR fat depth to predict half carcass composition in sheep

2007 ◽  
Vol 47 (10) ◽  
pp. 1165 ◽  
Author(s):  
F. R. Dunshea ◽  
D. Suster ◽  
P. J. Eason ◽  
R. D. Warner ◽  
D. L. Hopkins ◽  
...  
Keyword(s):  
Mineral Content ◽  
Dual Energy ◽  
Carcass Composition ◽  
Regression Equations ◽  
Tissue Mass ◽  
X Ray ◽  
Longissimus Lumborum ◽  
The Relationship ◽  
Non Destructive ◽  
Total Tissue

A Hologic QDR4500W dual energy X-ray absorptiometer (DXA) was used to measure body composition in 60 sheep half carcasses ranging from 8 to 28 kg. Half carcasses were from ewes and wethers of mixed genetics. Values determined by DXA, including total tissue mass (TTM), lean tissue mass (LTM), fat tissue mass (FTM) and bone mineral content (BMC), for the half carcass were evaluated by comparison with chemically determined composition. In the case of BMC, the relationship was with chemically determined ash content. Liveweight and chemically determined lean, fat and ash were strongly related to DXA-derived values for TTM, LTM, FTM and BMC, respectively (R2 = 0.999, 0.986, 0.989 and 0.920, respectively). However, because DXA estimates were different from chemically determined values in this sample of carcasses, they needed to be adjusted with the use of appropriate regression equations to correct the in-built algorithms. These data demonstrate the efficacy of DXA as a non-destructive method for determining the composition of the sheep half carcass.

scholarly journals Radiographic analysis to assess the seed structure of Crotalaria juncea L.

2016 ◽  
Vol 38 (2) ◽  
pp. 161-168 ◽  
Author(s):  
Natália Arruda ◽  
Silvio Moure Cicero ◽  
Francisco Guilhien Gomes-Junior
Keyword(s):  
Mechanical Damage ◽  
Detailed Examination ◽  
Seed Morphology ◽  
Stink Bug ◽  
Seed Structure ◽  
Crotalaria Juncea ◽  
X Ray ◽  
Seed Damage ◽  
The Relationship ◽  
Non Destructive

Abstract: The X-ray test is a simple, fast, non-destructive, and highly precise test that enables detailed examination of internal seed morphology and identification of seed damage and its location and type. The objective of the present study was to evaluate the efficiency of the X-ray test and the relationship between the structure of Crotalaria juncea seeds and germination. Six lots of Crotalaria juncea seeds of the IAC-KR1 cultivar were subjected to X-ray and germination tests. Normal and abnormal seedlings and dead seeds were photographed and analyzed together with the X-ray images of the seeds. Results showed that analysis of X-ray images is effective in identifying mechanical damage, stink bug damage, and deteriorated tissues in Crotalaria juncea seeds and is able to establish an association between their occurrence and germination.

Hubungan antara Luas Lesi pada Foto Toraks Penderita TB Paru Dewasa yang Memiliki Riwayat Diabetes Melitus dengan Indeks Massa Tubuh di Rumah Sakit Hasan Sadikin Bandung

2016 ◽  
Vol 1 (3) ◽  
pp. 138-144
Author(s):  
Ina Edwina ◽  
Rista D Soetikno ◽  
Irma H Hikmat
Keyword(s):  
Chest Radiograph ◽  
Chi Square ◽  
Pulmonary Tb ◽  
X Ray ◽  
Consecutive Sampling ◽  
Close Relationship ◽  
Chi Square Test ◽  
Chest X Ray ◽  
The Relationship ◽  
Diabetes Melitus

Background: Tuberculosis (TB) and diabetes mellitus (DM) prevalence rates are increasing rapidly, especially in developing countries like Indonesia. There is a relationship between TB and DM that are very prominent, which is the prevalence of pulmonary TB with DM increased by 20 times compared with pulmonary TB without diabetes. Chest X-ray picture of TB patients with DM is atypical lesion. However, there are contradictories of pulmonary TB lesion on chest radiograph of DM patients. Nutritional status has a close relationship with the morbidity of DM, as well as TB.Objectives: The purpose of this study was to determine the relationship between the lesions of TB on the chest radiograph of patients who su?er from DM with their Body Mass Index (BMI) in Hasan Sadikin Hospital Bandung.Material and Methods: The study was conducted in Department of Radiology RSHS Bandung between October 2014 - February 2015. We did a consecutive sampling of chest radiograph and IMT of DM patients with clinical diagnosis of TB, then the data was analysed by Chi Square test to determine the relationship between degree of lesions on chest radiograph of pulmonary TB on patients who have DM with their BMI.Results: The results showed that adult patients with active pulmonary TB with DM mostly in the range of age 51-70 years old, equal to 62.22%, with the highest gender in men, equal to 60%. Chest radiograph of TB in patients with DM are mostly seen in people who are obese, which is 40% and the vast majority of lesions are minimal lesions that is equal to 40%.Conclusions: There is a signifcant association between pulmonary TB lesion degree with BMI, with p = 0.03

Highlights in the history of X-ray topography1

1995 ◽  
Vol 210 (6) ◽  
Author(s):  
A. R. Lang
Keyword(s):  
Magnetic Domain ◽  
Diffraction Theory ◽  
Dislocation Loops ◽  
X Ray Diffraction ◽  
X Ray ◽  
Domain Structures ◽  
Structure Factors ◽  
History Of ◽  
Dislocation Sources ◽  
Non Destructive

AbstractX-ray topography provides a non-destructive method of mapping point-by-point variations in orientation and reflecting power within crystals. The discovery, made by several workers independently, that in nearly perfect crystals it was possible to detect individual dislocations by X-ray diffraction contrast started an epoch of rapid exploitation of X-ray topography as a new, general method for assessing crystal perfection. Another discovery, that of X-ray Pendellösung, led to important theoretical developments in X-ray diffraction theory and to a new and precise method for measuring structure factors on an absolute scale. Other highlights picked out for mention are studies of Frank-Read dislocation sources, the discovery of long dislocation helices and lines of coaxial dislocation loops in aluminium, of internal magnetic domain structures in Fe-3 wt.% Si, and of stacking faults in silicon and natural diamonds.

Stoichiometric Determination of Graphite Intercalation Compounds Using Rutherford Backscatiering Spectrometry

1983 ◽  
Vol 27 ◽  
Author(s):  
L. Salamanca-Riba ◽  
B.S. Elman ◽  
M.S. Dresselhaus ◽  
T. Venkatesan
Keyword(s):  
Experimental Error ◽  
Rutherford Backscattering Spectrometry ◽  
Rutherford Backscattering ◽  
Intercalation Compounds ◽  
Graphite Intercalation Compounds ◽  
X Ray ◽  
Donor And Acceptor ◽  
Graphite Intercalation ◽  
Non Destructive

ABSTRACTRutherford backscattering spectrometry (RBS) is used to characterize the stoichiometry of graphite intercalation compounds (GIC). Specific application is made to several stages of different donor and acceptor compounds and to commensurate and incommensurate intercalants. A deviation from the theoretical stoichiometry is measured for most of the compounds using this non-destructive method. Within experimental error, the RBS results agree with those obtained from analysis of the (00ℓ) x-ray diffractograms and weight uptake measurements on the same samples.

X-Ray Tomography for Electronic Packages

2000 ◽  
Author(s):  
Deepak Goyal
Keyword(s):  
3D Imaging ◽  
Development Time ◽  
Analytical Techniques ◽  
Electronic Packages ◽  
X Ray ◽  
Imaging Capability ◽  
Imaging Results ◽  
Key Drivers ◽  
Analytical Tools ◽  
Non Destructive

Abstract Next generation assembly/package development challenges are primarily increased interconnect complexity and density with ever shorter development time. The results of this trend present some distinct challenges for the analytical tools/techniques to support this technical roadmap. The key challenge in the analytical tools/techniques is the development of non-destructive imaging for improved time to information. This paper will present the key drivers for the non-destructive imaging, results of literature search and evaluation of key analytical techniques currently available. Based on these studies requirements of a 3D imaging capability will be discussed. Critical breakthroughs required for development of such a capability are also summarized.

Sign in / Sign up

Export Citation Format

Share Document