scholarly journals CHANGE IN THE BASIC PARAMETERS OF THE MICROCLIMATE OF THE BEDS DEPENDING ON THE TYPE OF LEDING MATERIAL USED

Author(s):  
R.N. Fayzrakhmanov ◽  
◽  
N.I. Danilova ◽  
O.A. Beloglazova ◽  
P.V. Sofronov ◽  
...  

The influence of a new hygienic bedding material made from woodworking waste and processed by thermochemical and biotechnological methods on the parameters of the microclimate in the barn has been studied. As a result of the experiments, it was found that the use of a new hygienic bedding material contributed to a decrease in humidity at the end of the study by 5.3 %, a significant decrease in the content of ammonia – 13.7 %, dust – 14.8 % and microorganisms – 17.0 %, compared to control, respectively.

1999 ◽  
Vol 173 ◽  
pp. 381-387
Author(s):  
M. Królikowska ◽  
G. Sitarski ◽  
S. Szutowicz

AbstractThe nongravitational motion of five “erratic” short-period comets is studied on the basis of published astrometric observations. We present the precession models which successfully link all the observed apparitions of the comets: 21P/Giacobini-Zinner, 31P/Schwassmann-Wachmann 2, 32P/Comas Solá, 37P/Forbes, and 43P/Wolf-Harrington. We used the Sekanina's forced precession model of the rotating cometary nucleus to include the nongravitational terms into equations of the comet's motion. Values of six basic parameters (four connected with the rotating comet nucleus and two describing the precession of spin-axis of the nucleus) have been determined along the orbital elements from positional observations of the comets. The solutions were derived with additional assumptions which introduce instantaneous changes of modulus of reactive force,Aand of maximum of cometary activity with respect to perihelion time. The present precession models impose some contraints on sizes and rotational periods of cometary nuclei. According to our solutions the nucleus of 21P/Giacobini-Zinner with oblateness along the spin-axis of about 0.32 (equatorial to polar radius of 1.46) is the most oblate among five investigated comets.


2003 ◽  
pp. 123-135
Author(s):  
D. Kokurin ◽  
G. Melkumov

The article deals with the leading participants of the global oil market and examines its basic parameters in 2002. The authors point out such demand-creating countries as the USA, the EU15 and the Asia Pacific, discuss their specifics as oil-consuming countries and their ability to influence the global oil market. The supply is provided by OPEC countries, US oil corporations and partly independent oil producers.


2017 ◽  
pp. 38-60 ◽  
Author(s):  
A. Pestova

This paper analyzes the basic parameters of monetary policy in 2000-2015 in Russia. We provide the overview of tools and objectives of monetary policy of the Bank of Russia and identify the periods of homogeneity of monetary policy regimes: from money base targeting to exchange rate targeting and finally, to interest rates policy. On the basis of this research we develop the recommendations for further quantitative research aimed at estimation of monetary policy effects in Russia.


Long-term experience of application of a method of electric heating by heating wires of the monolithic concrete and reinforced concrete structures erected in winter conditions is analyzed. This method, developed by the author of the article, took a dominant position on the construction sites due to the simplicity and efficiency in comparison with the mass applied in those years, the method of electric heating of concrete with steel round and strip electrodes. The data on labor intensity, material and energy costs in comparison with the method of rod electric heating are presented. Step-by-step technological operations on preparatory works and electric heating of monolithic structures with the use of extensive hands-on material, which formed the basis for the development of technological regulations, supplemented by a number of new proposals to improve the technology of works, are concretized. In order to work out the optimal mode of heat treatment, the studies of the concrete thermal conductivity factor in the process of its heating and strength development were carried out. The method for calculation of the basic parameters of concrete electric heating is presented. For simplification of calculations, for a wide contingent of masters, superintendents and technical personnel, the nomogram , making it possible with sufficient accuracy under the construction conditions to calculate the necessary heating parameters, was developed. The necessity of grounding the heating wire remaining in the concrete to reduce the harmful effect of magnetic radiation from various appliances and household appliances on the human body is noted.


2020 ◽  
Vol 7 (3) ◽  
pp. 23-28
Author(s):  
EZIZ SARVAN SHIRVAN ◽  

This paper discusses the kinematic characteristics of lapping process and the main parameters of the process. It was determined that the influencing degree of technological parameters to the forming surface and processes. It was projected the construction of the lapping head for processing of internal cylindrical surfaces, scheme of the lapping operation and graphic description of the forces influencing. The relationships between the axial, radial and tangential cutting forces and the effect of the combined force thereof are determined in order to ensure the necessary surface pressure. During the analysis geometric and mathematical relationships were obtained. The extracted analytical expressions can be realized by further experimental researches and can be used in engineering calculations of technological parameters of processing by lapping. Angular velocity, friction force, linear velocity, also the length of the tactile curve and the radius of the part can be considered the main kinematic and dynamic parameters of the process that the formation of the surface, also the course of the process depends on these parameters. Depending on the kinematic parameters, the wear nature of the tool changes and this changes the linear and angular velocities, which have a significant impact on the accuracy, quality and productivity of processing. When examining the technological capabilities of the process, the nature of the movement between the part and the grinding tool, also changes in cutting speed are often considered as a main factor. Analytical expressions were obtained to determine the main parameters of the process, taking into account the kinematic characteristics of the friction process. These expressions can be used in engineering calculations and allow to determine the optimal values of the processing mode. In order to obtain the required micrometric surface cleanliness and measurement accuracy, correlation relationships were established between the main parameters of the process, equations of the equilibrium system of shear forces were compiled and analytical expressions were obtained based on the analysis of kinematic and dynamic properties of the system.


Author(s):  
Oleksandr Synenko ◽  
Kateryna Yarema ◽  
Yuliia Bezsmertna

The subject of the research is the approach to the possibility of using the Solow model to perform the regression analysis on the example of the Ukrainian economy model. The purpose of writing this article is to investigate the notion of regres- sion analysis, Solow’s economy model, algorithm for performing regression analy- sis on the example of Ukraine’s economy model. This model can be adapted for the economy of enterprises. Methodology. The research methodology is system-struc- tural and comparative analyzes (to study the structure of GDP); monograph (when studying methods of regression analysis on the example of the Ukrainian economy); economic analysis (when assessing the impact of factors on Ukraine’s GDP). The scientific novelty consists the features of the use of the Solow model on the ex- ample of Ukrainian economy are determined. An algorithm for calculating the basic parameters of a model using the Excel application package is disclosed. The main recommendations on the development of the national economy and economic growth through the use of macroeconomic instruments are given. Conclusions. The use of the Solow model enables forecasting and analysis. The results obtained re- vealed the problem of low resource return of capital as a resource, along with the means of macroeconomic regulation of the investment process, using which can improve the situation. A special place in these funds belongs to the accelerated depreciation and interest rate policies.


Author(s):  
V. P. Klimenko ◽  
V. М. Kosolapov ◽  
V. G. Kosolapova ◽  
К. Е. Yurtaeva

The data on assessment the preservative action of new enzymatic multisystem in combination with bacterial silage additive Silzak at alfalfa ensiling are presented in this study. It is known that alfalfa is a nonensiling legume grass because of excess moisture, sugar deficit and high content of crude protein. The experiments on alfalfa ensiling were conducted with application the enzymatic multisystem FM-1 under laboratory and research-and-production conditions. The multisystem was developed by the specialists of science-and-technical centre «Lecbiotech» in cooperation with scientists of Williams Fodder Research Institute. The optimal dose of FM-1 application and its preservative effectiveness in comparison with chemical conservant were determined in technological experiments. Obtained silage was evaluated on basic parameters: nutrients and organic acids content, ammonia, active acidity. The influence of the tested biological additive on the nutrients digestibility and energy value of alfalfa silage was estimated in experiments with hog lambs. Total results have shown the efficiency of the new development. Lucerne silage, prepared with application of mixture FM-1 and Silzak, was characterized by the better parameters of nutrients digestibility and energy value than at using a chemical conservant AIV 3 plus. The optimal dose of enzymatic multisystem application, as 90 gram per ton of fresh plant mass, was determined in the series of experiments.


Sign in / Sign up

Export Citation Format

Share Document