scholarly journals The microstructure of meteoric ice from Vostok, Antarctica

2007 ◽  
Vol 53 (180) ◽  
pp. 41-62 ◽  
Author(s):  
Rachel Obbard ◽  
Ian Baker
Keyword(s):  
Electron Backscatter Diffraction ◽  
Impurity Content ◽  
Microstructural Development ◽  
Glacial Ice ◽  
Fine Grained ◽  
Grain Boundary Mobility ◽  
Coarse Grains ◽  
Vostok Station ◽  
Glacial Periods ◽  
Backscatter Diffraction

AbstractThe 3623 m long, 5G core collected at Vostok station, Antarctica, contains alternating layers of meteoric ice with two distinctly different microstructures. In this paper, we present the microstructure and impurity content of a number of specimens ranging in depth from 97 to 3416 m, describe in detail the characteristics of the different layers and propose a mechanism for their microstructural development. Digital image analysis, ion chromatography, scanning electron microscopy and energy dispersive X-ray spectroscopy were used to measure texture and the location and type of impurities; electron backscatter diffraction was used to determine crystal orientation. The ice associated with interglacial periods is characterized by relatively coarse grains and a strong preferred orientation of the c axes in a plane encompassing the coring direction, producing a vertical-girdle fabric. In contrast, ice from glacial periods is characterized by a much smaller grain size and a strong singlemaximum fabric, where the c axes are clustered around the vertical. Calcium is uniquely present in the grain boundaries of the fine-grained glacial layers, and its effect on grain-boundary mobility and the misorientation dependence of mobility can explain the development of the discontinuous microstructure seen in glacial ice at Vostok station.

scholarly journals Microstructural Evolution of a 3003 Based Aluminium Alloy during the CSET Process

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5770
Author(s):  
Orsolya Molnárová ◽  
Stanislav Habr ◽  
Esther de Prado ◽  
Jaroslav Čapek ◽  
Ondřej Ekrt ◽  
...  
Keyword(s):  
Aluminium Alloy ◽  
Electron Backscatter Diffraction ◽  
Microstructural Development ◽  
Initial Value ◽  
Fine Grained ◽  
Severe Plastic Deformation Technique ◽  
Angular Pressing ◽  
Transmission Electron ◽  
Metallic Cylinder ◽  
Backscatter Diffraction

A new severe plastic deformation technique, known as the complex shearing of extruded tube (CSET), was applied to a 3003 based model aluminium alloy. This technique, consisting of a combination of extrusion and two consecutive Equal Chanel Angular Pressing (ECAP) passes accompanied with concurrent torsional straining, is capable to produce a fine-grained tubular sample directly from a bulk metallic cylinder in one forming operation. In the present paper, the microstructural development of the alloy during partial processes of CSET was studied in detail using light microscopy, electron backscatter diffraction, and transmission electron microscopy. It was found that CSET technique refines the grain size down to 0.4 µm and, consequently, increases the microhardness from the initial value of 40 HV to the final value of 120 HV. The contributions of partial processes of CSET to the total strain were estimated.

Unusual Microstructural Development upon Gaseous Nitriding of Fe-4.65at% Al Alloy

2010 ◽  
Vol 89-91 ◽  
pp. 371-376
Author(s):  
S. Meka ◽  
R.E. Schacherl ◽  
E. Bischoff ◽  
Eric J. Mittemeijer
Keyword(s):  
Electron Backscatter Diffraction ◽  
Ferrite Matrix ◽  
Microstructural Development ◽  
Al Alloy ◽  
X Ray Diffraction ◽  
Gaseous Nitriding ◽  
Backscatter Diffraction ◽  
Micro Analysis ◽  
Very High ◽  
Plate Type

Employing NH3/H2 gas mixtures, Fe-4.65at% Al alloy specimens were nitrided to assess how the presence of Al, originally dissolved in the ferrite matrix, influences the development of γ-Fe4N1-x phase in the surface adjacent region. The nitrided specimens were characterized by light microscopy, X-ray diffraction, Electron Backscatter Diffraction and Electron Probe Micro Analysis. Surprisingly, formation of ε-Fe2N1-x was observed, although, for the applied nitriding parameters (nitriding potential and temperature), only the formation of γ-Fe4N1-x would be expected in case of nitriding pure ferrite. An unusual plate-type morphology of γ-Fe4N1-x was observed, contrasting with the usual continuous layer-type growth observed upon nitriding iron, Fe-Cr and Fe-V alloys. These unexpected phenomena may be explained as consequences of the need to realize a very high nitrogen supersaturation in the ferrite matrix in order to initiate the precipitation of AlN.

Numerical and Experimental Investigation on the Hybrid Superplastic Forming of the Conical Mg Alloy Component

2018 ◽  
Vol 385 ◽  
pp. 391-396
Author(s):  
Mei Ling Guo ◽  
Ming Jen Tan ◽  
Xu Song ◽  
Beng Wah Chua
Keyword(s):  
Electron Backscatter Diffraction ◽  
Thickness Distribution ◽  
Superplastic Forming ◽  
Test Results ◽  
Forming Process ◽  
Hyperbolic Sine ◽  
Coarse Grains ◽  
Hot Drawing ◽  
Material Forming ◽  
Backscatter Diffraction

Hybrid superplastic forming (SPF) is a novel sheet metal forming technique that combines hot drawing with gas forming process. Compared with the conventional SPF process, the thickness distribution of AZ31B part formed by this hybrid SPF method has been significantly improved. Additionally, the microstructure evolution of AZ31 was examined by electron backscatter diffraction (EBSD). Many subgrains with low misorientation angle were observed in the coarse grains during SPF. Based on the tensile test results, parameters of hyperbolic sine creep law model was determined at 400 oC. The hybrid SPF behavior of non-superplastic grade AZ31B was predicted by ABAQUS using this material forming model. The FEM results of thickness distribution, thinning characteristics and forming height were compared with the experimental results and have shown reasonable agreement with each other.

An Study of Nanoscale Mechanical Twins in GH4169 Alloy by Laser Shot Peening Processing

2021 ◽  
Vol 1027 ◽  
pp. 155-162
Author(s):  
Qiang Wang
Keyword(s):  
Shot Peening ◽  
Electron Backscatter Diffraction ◽  
Laser Shot ◽  
Near Surface ◽  
Refined Grains ◽  
Transmission Electron ◽  
Coarse Grains ◽  
Mechanical Twins ◽  
Backscatter Diffraction ◽  
Gh4169 Alloy

In order to study the mechanism of the fatigue strengthening using laser shot peening in GH4169 alloy, micro-structural and nanoscale mechanical twins (MT) at different depth below the top surface subjected to laser shot peening processing (LSP) were investigated by means of electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM) observations. In terms of the experimental observations and analyses, the formation of refined grains and nanoscale MT mechanism at the near surface of GH4169 alloy as a function of LSP treament can be summarized as follows: (i) two direction low density of MTs divide the initial coarse grains into submicron rhombic blocks; (ii) high density of MTs aligned in two directions subdivide the submicron rhombic blocks into nanoscale rhombic MT blocks; (iii) the third direction MT further refine the nanoscale rhombic MT blocks into nanoscale triangular MT blocks; (iv) some of subdivided blocks evolve into refined grains. An ultra-high strain rate induced by ultra-short laser pulse plays a key role in the formation of refined grains and nanoscale MT during plastic deformation of GH4169 alloy subjected to LSP treatment.

Shear Pressing for Grain Refinement of Al-Mg-Li Sheet

2007 ◽  
Vol 546-549 ◽  
pp. 885-888
Author(s):  
Yu Xuan Du ◽  
Xin Ming Zhang ◽  
Ling Ying Ye ◽  
Zhi Hui Luo
Keyword(s):  
Shear Deformation ◽  
Grain Refinement ◽  
Electron Backscatter Diffraction ◽  
Grain Structure ◽  
Grain Refining ◽  
Metallic Materials ◽  
Inclined Plane ◽  
Fine Grained ◽  
Electron Backscatter ◽  
Backscatter Diffraction

A novel shear-deformation technique, named ‘shear pressing’ (SP), was developed for fabrication of plate-shaped fine grained metallic materials. The principle of SP is that a material is subjected to shear deformation by utilizing pressing with inclined plane dies. A micrometer order grain structure was obtained in an Al-Mg-Li alloy at strain of ε = -2.3 by utilizing this technique. The grain refinement sequences during pressing were examined by electron backscatter diffraction. The enhancement of grain refinement to the Al-Mg-Li alloy was compared with plane strain compression (PSC) at similar strains. The effect of the shear strain on the accelerated grain refining during compressing has been discussed.

Crystallography of Natural and Synthetic Gold Alloy Microstructures

2013 ◽  
Vol 753 ◽  
pp. 477-480 ◽  
Author(s):  
Angela Halfpenny ◽  
Robert Hough ◽  
Michael Nugus
Keyword(s):  
Lattice Distortion ◽  
Electron Backscatter Diffraction ◽  
Gold Foil ◽  
Gold Deposition ◽  
Synthetic Sample ◽  
Coarse Grains ◽  
Formation Conditions ◽  
Backscatter Diffraction ◽  
Gold Microstructures ◽  
Natural And Synthetic

To improve our understanding of the mechanisms of gold deposition, a comparison was made of the microstructures of a natural gold sample with a synthetic gold foil of similar alloy composition (approximately Au 90%, Ag 10%). The aim was to identify any similarities between the samples that could help increase our knowledge of how the natural gold microstructures formed and were modified post-mineralisation. The samples were analysed using electron backscatter diffraction to map their microstructure, with the synthetic gold foil then heated to and mapped at 400°C, 500°C, 600°C and 700°C. Both the natural and synthetic sample exhibited a dominance of ∑3 twin boundaries, but these were much less abundant in the synthetic sample prior to heating. The natural sample is dominated by coarse grains exhibiting lattice distortion and low angle grain boundaries, which more closely resemble the synthetic gold foil microstructure after recrystallisation has taken place, than the initial microstructure, implying that the grains have had time to grow. Performing experiments such as these allows direct comparison of gold microstructures where the formation conditions are known and the controlling mechanisms can be determined. This will improve our understanding of the important mechanisms behind gold deposition.

The Occurrence of a Peripheral Coarse Grain Zone (PCGZ) in Extruded Bars of AA 7108

2021 ◽  
Vol 1016 ◽  
pp. 1141-1146
Author(s):  
Saul Hissaci de Souza ◽  
Ronald Lesley Plaut ◽  
Nelson Batista de Lima ◽  
Rene Ramos de Oliveira ◽  
Angelo Fernando Padilha
Keyword(s):  
Electron Backscatter Diffraction ◽  
Microstructural Analysis ◽  
Polarized Light ◽  
Coarse Grain ◽  
X Ray Diffraction ◽  
Rectangular Section ◽  
X Ray ◽  
Analysis Techniques ◽  
Coarse Grains ◽  
Backscatter Diffraction

Industrial-scale extruded profiles of AA 7108 with a rectangular section (25.60 mm x 15.95 mm) were used in this investigation. Some complementary microstructural analysis techniques, such as polarized light microscopy, EBSD (Electron Backscatter Diffraction) and X-ray diffraction were used to characterize the microstructure, focusing on the PCG zone. It was observed that the extruded profiles presented a totally recrystallized microstructure and a 300 μm layer of peripheral coarse grains. Additionally, the results showed that the PCGZ predominant grain orientation {311} <110> differs from the texture below the PCGZ (Goss and Cube components).

Effect of Nickel Purity on Self-Diffusion along High-Diffusivity Paths

2007 ◽  
Vol 567-568 ◽  
pp. 245-248 ◽  
Author(s):  
Vĕra Rothová ◽  
Jiří Buršík ◽  
Milan Svoboda ◽  
Jiří Čermák
Keyword(s):  
Electron Backscatter Diffraction ◽  
Coincidence Site Lattice ◽  
Impurity Content ◽  
Serial Sectioning ◽  
Site Lattice ◽  
Microstructure Characteristics ◽  
Self Diffusion ◽  
Sectioning Method ◽  
Electron Backscatter ◽  
Backscatter Diffraction

In the temperature range 600–1000 °C, the effect of material purity on self-diffusion along grain boundaries has been studied in both the pure (Puratronic 99.9945%) and the technical (99.5%) nickel. The penetration profiles were measured by the serial sectioning method using the 63Ni radiotracer. The extensive electron backscatter diffraction (EBSD) analysis was performed on the same samples in order to reveal possible differences in microstructure induced by the impurity content. The obtained microstructure characteristics were further interpreted in terms of the coincidence site lattice (CSL) model.

Effect of Local Texture on the Orange Peel Defect in St14 Steel Sheet

2005 ◽  
Vol 495-497 ◽  
pp. 167-172
Author(s):  
Sheng Quan Cao ◽  
Jin Xu Zhang ◽  
Jian Sheng Wu ◽  
Jia Guang Chen
Keyword(s):  
Slip System ◽  
Steel Sheet ◽  
Electron Backscatter Diffraction ◽  
Orange Peel ◽  
Phase Zone ◽  
Coarse Grains ◽  
Schmid Factor ◽  
Ebsd Technique ◽  
Backscatter Diffraction ◽  
St14 Steel

In this paper, the ‘orange peel’ defect in the surface range of the st14 steel sheet has been investigated using the electron backscatter diffraction (EBSD) technique. It has been found that the ‘orange peel’ defect in the st14 steel sheet was resulted from the local coarse grains which were produced during hot-rolling due to the critical deformation in dual-phase zone; During deep drawing, the coarse grains with {100}<001> microtexture can slip on the {112}<111> slip system to form bulging and yields orange peel defects, while the coarse grains with {112}<110> orientation do not form the defect as the Schmid factor of {112}<111> slip system in it equals zero.

Characters of Coarse Grains Subdivisions in Rolled Polycrystalline Al

2007 ◽  
Vol 546-549 ◽  
pp. 1033-1036
Author(s):  
Qi Ping Hu ◽  
Yong Zhang ◽  
Yun Lai Deng
Keyword(s):  
High Purity ◽  
Electron Backscatter Diffraction ◽  
Coarse Grains ◽  
Electron Backscatter ◽  
Columnar Grains ◽  
Cold Rolled ◽  
Ebsd Technique ◽  
The Individual ◽  
Individual Grains ◽  
Backscatter Diffraction

Deformation microstructures and micro-orientations of columnar grains with different orientations in a polycrystalline high purity Al cold-rolled up to 65% (thickness reduction) were investigated using electron backscatter diffraction (EBSD) technique. It was found that rotations were Inhomogeneous within the individual grains, the rotation angles of the parts close to the initial boundaries (BPs) were smaller than those remote from the boundaries (IPs), e.g. the deviation angles between the BPs and the IPs were 5-6° in the grains with <001>//RD orientation, leading to the rotation along the α-fiber, while the deviation angles were 5-12° in the grains with <121>//ND orientation rotating toward the β-fiber. These results demonstrated that the microstructures and local rotations of various parts within the rolled individual columnar grains were influenced by their initial orientations and boundaries.

Sign in / Sign up

Export Citation Format

Share Document