Anonymity and rewards in peer rating systems

2021 ◽  
pp. 1-57
Author(s):  
Lydia Garms ◽  
Siaw-Lynn Ng ◽  
Elizabeth A. Quaglia ◽  
Giulia Traverso

When peers rate each other, they may rate inaccurately to boost their own reputation or unfairly lower another’s. This could be mitigated by having a reputation server incentivise accurate ratings with a reward. However, assigning rewards becomes challenging when ratings are anonymous, since the reputation server cannot tell which peers to reward for rating accurately. To address this, we propose an anonymous peer rating system in which users can be rewarded for accurate ratings, and we formally define its model and security requirements. In our system ratings are rewarded in batches, so that users claiming their rewards only reveal they authored one in this batch of ratings. To ensure the anonymity set of rewarded users is not reduced, we also split the reputation server into two entities, the Rewarder, who knows which ratings are rewarded, and the Reputation Holder, who knows which users were rewarded. We give a provably secure construction satisfying all the security properties required. For our construction we use a modification of a Direct Anonymous Attestation scheme to ensure that peers can prove their own reputation when rating others, and that multiple feedback on the same subject can be detected. We then use Linkable Ring Signatures to enable peers to be rewarded for their accurate ratings, while still ensuring that ratings are anonymous. Our work results in a system which allows accurate ratings to be rewarded, whilst still providing anonymity of ratings with respect to the central entities managing the system.

2021 ◽  
Vol 13 (9) ◽  
pp. 5041
Author(s):  
Ayyagari Ramani ◽  
Borja García de Soto

Multiple sustainability standards and rating systems have been developed to draw attention to constructing sustainable buildings. The Pearl Rating System (PRS) is a mandate for all new construction projects in Abu Dhabi. Hence, it is important to understand the main components, advantages, and limitations of the PRS. The feasibility and the practical relevance of the PRS are still being studied. This paper addresses this gap and critically evaluates the PRS against some of the well-established rating systems like LEED and BREEAM. The analysis suggests that the PRS considers the cultural aspect of sustainability, in addition to the environmental, societal, and economic aspects. It was also found that most rating systems, including the PRS, have a very superficial inclusion of life cycle assessment (LCA). The paper finally concludes with other observations and outlook for a more robust implementation of the PRS.


2021 ◽  
Author(s):  
◽  
Benjamin Philip Palmer

<p>An increasing number of products are exclusively digital items, such as media files, licenses, services, or subscriptions. In many cases customers do not purchase these items directly from the originator of the product but through a reseller instead. Examples of some well known resellers include GoDaddy, the iTunes music store, and Amazon. This thesis considers the concept of provenance of digital items in reseller chains. Provenance is defined as the origin and ownership history of an item. In the context of digital items, the origin of the item refers to the supplier that created it and the ownership history establishes a chain of ownership from the supplier to the customer. While customers and suppliers are concerned with the provenance of the digital items, resellers will not want the details of the transactions they have taken part in made public. Resellers will require the provenance information to be anonymous and unlinkable to prevent third parties building up large amounts of information on the transactions of resellers. This thesis develops security mechanisms that provide customers and suppliers with assurances about the provenance of a digital item, even when the reseller is untrusted, while providing anonymity and unlinkability for resellers . The main contribution of this thesis is the design, development, and analysis of the tagged transaction protocol. A formal description of the problem and the security properties for anonymously providing provenance for digital items in reseller chains are defined. A thorough security analysis using proofs by contradiction shows the protocol fulfils the security requirements. This security analysis is supported by modelling the protocol and security requirements using Communicating Sequential Processes (CSP) and the Failures Divergences Refinement (FDR) model checker. An extended version of the tagged transaction protocol is also presented that provides revocable anonymity for resellers that try to conduct a cloning attack on the protocol. As well as an analysis of the security of the tagged transaction protocol, a performance analysis is conducted providing complexity results as well as empirical results from an implementation of the protocol.</p>


Author(s):  
Nikhil Garg ◽  
Ramesh Johari

Problem definition: Platforms critically rely on rating systems to learn the quality of market participants. In practice, however, ratings are often highly inflated and therefore, not very informative. In this paper, we first investigate whether the platform can obtain less inflated, more informative ratings by altering the meaning and relative importance of the levels in the rating system. Second, we seek a principled approach for the platform to make these choices in the design of the rating system. Academic/practical relevance: Platforms critically rely on rating systems to learn the quality of market participants, and so, ensuring these ratings are informative is of first-order importance. Methodology: We analyze the results of a randomized, controlled trial on an online labor market in which an additional question was added to the feedback form. Between treatment conditions, we vary the question phrasing and answer choices; in particular, the treatment conditions include several positive-skewed verbal rating scales with descriptive phrases or adjectives providing specific interpretation for each rating level. We then develop a model-based framework to compare and select among rating system designs and apply this framework to the data obtained from the online labor market test. Results: Our test reveals that current inflationary norms can be countered by reanchoring the meaning of the levels of the rating system. In particular, positive-skewed verbal rating scales yield substantially deflated rating distributions that are much more informative about seller quality. Further, we demonstrate that our model-based framework for scale design and optimization can identify the most informative rating system and substantially improve the quality of information obtained over baseline designs. Managerial implications: Our study illustrates that practical, informative rating systems can be designed and demonstrates how to compare and design them in a principled manner.


Author(s):  
Oluwatobi Oluwalaiye ◽  
Mehmet E. Ozbek

The construction industry contributes a significant amount of greenhouse gas emissions to the environment. This highlights the need for this industry to implement sustainable practices to mitigate its negative effects. Sustainability in the construction industry involves considering project development in terms of economic, social, and environmental aspects (triple bottom line). In the transportation sector of the construction industry, several transportation sustainability rating systems (TSRS) have been developed to measure and promote sustainability. However, studies show that these TSRS have not been developed within a consistent “sustainability scope”. This raises the question of the consistency of these TSRS in measuring sustainability of transportation projects. This study assesses three prominent TSRS to determine how each measures sustainability with respect to the triple bottom line. The TSRS that are in the scope of this study are: (i) Envision-a third-party rating system, (ii) INVEST-a self-assessed rating and, (iii) GreenLITES-an in-house developed self-assessed rating system for the New York State DOT. Results show that while these three rating systems provide different levels of credits/points with respect to the triple bottom line, they all place the highest focus on the environmental aspect.


2020 ◽  
Vol 2020 ◽  
pp. 1-14
Author(s):  
Jiangheng Kou ◽  
Mingxing He ◽  
Ling Xiong ◽  
Zeqiong Lv

The multiserver architecture authentication (MSAA) protocol plays a significant role in achieving secure communications between devices. In recent years, researchers proposed many new MSAA protocols to gain more functionality and security. However, in the existing studies, registered users can access to all registered service providers in the system without any limitation. To ensure that the system can restrict users that are at different levels and can access to different levels of service providers, we propose a new lightweight hierarchical authentication protocol for multiserver architecture using a Merkle tree to verify user’s authentication right. The proposed protocol has hierarchical authentication functionality, high security, and reasonable computation and communication costs. Moreover, the security analysis demonstrates that the proposed protocol satisfies the security requirements in practical applications, and the proposed protocol is provably secure in the general security model.


2019 ◽  
Vol 17 (1/2) ◽  
pp. 183-190
Author(s):  
Ngai Keung Chan

On-demand labor platforms are built around user-generated rating systems that entail consumers’ monitoring of workers as a tool for algorithmic labor management. The user-generated ratings can directly determine workers’ employability. Workers are thus under pressure to score well, though they may lack knowledge about the performance metrics. Using in-depth interviews with Uber drivers, this article examines how Uber’s rating system as an engine of anxiety shapes drivers’ work practices through processes of surveillance and normalization. Specifically, drivers are prompted to play the rating game, a game that pressures them toward the normalization of platform surveillance and self-discipline for maximizing their ratings. The internalization of ratings is channeled through drivers’ reactive practices in the rating game—that is, drivers’ modification of their behavior in response to being evaluated and monitored. This article considers the socio-technical conditions under which drivers are subject to the platform surveillance and disciplinary power.


2019 ◽  
Vol 13 (1) ◽  
pp. 169-193 ◽  
Author(s):  
Fay Abdulla Al Khalifa

Purpose The damage humans caused to the environment post the industrial revolution fostered developing sustainability-rating systems – a number of evaluation instruments that focus on various factors to evaluate buildings and small-scale urban developments. Nevertheless, no buildings are certified in Bahrain, the environmentally challenged country in the Arabian Gulf. The paper aims to discuss these issues. Design/methodology/approach This study assesses 11 sustainability-rating systems: LEED, Green Globes, BREEAM, DGNB, SBTool, WELL, CASBEE, Green Star, HQE, GSAS and the Pearl Rating System (PRS). These were selected because of their international applicability, popularity and importance. The study adopts a system of criteria using a comparative review and cross-comparisons to draw conclusions on the compliance of the selected systems to the Bahraini context and assesses the need and importance of a customised sustainability-rating tool. Findings The study concluded that LEED is the most comprehensive, international and versatile sustainability-rating system. It is also the most popular. Nevertheless, the PRS is the most relevant to the Bahraini context and is the easiest to access. Originality/value This paper provides a deep understanding of sustainability-rating tools and introduces a methodology of comparison that can be used as a reference when choosing between tools.


2000 ◽  
Vol 7 (1) ◽  
pp. 15-30 ◽  
Author(s):  
Pekka Sipari

Evidently a wooden house can be built so that modern requirements for both airborne and impact sound insulation are met with sufficient margins. However, low-frequency impact sounds produced by walking may be either audible to the building occupants or felt by them as non-audible vibrations. It is clear that the present rating methods and also perhaps the tapping machine are inadequate where wooden floors are concerned, because the results may be subjectively confusing. The present situation, where internationally there are several rating systems leading to different numerical results for the same building element, needs to be addressed. Existing methods should be developed into a single international method covering all types of floors. The question of how to rate low-frequency (32-100 Hz) footfall noises, which may not be simulated adequately by a tapping machine and rated with present methods, must be considered as a special problem separate from the general rating system. It is generally recommended to add to the mass and stiffness of the wooden floor (for example, by adding a concrete layer) to improve its overall vibration and impact sound insulation behaviour. Such floors are believed to better satisfy the requirements of building occupants.


2014 ◽  
Vol 54 (1) ◽  
pp. 85-89 ◽  
Author(s):  
J. Connor Ferguson ◽  
Andrew J. Hewitt ◽  
John A. Eastin ◽  
Robert J. Connell ◽  
Rory L. Roten ◽  
...  

Abstract Drift Reduction Technologies (DRTs) are becoming increasingly important for improving spray applications in many countries including New Zealand (NZ). Although there is a growing database on the performance of DRTs, there is no rating system showing the effectiveness of the DRT’s performance. In Europe, DRTs are classified relative to current reference technologies as part of the rating systems used to establish spray drift risk reduction. We have recommended some key elements of such a comprehensive exposure risk reduction scheme for any country, based on prior and on-going research into the performance of specific DRTs in row, tree, and vine crops. Our intention was to create a rating system to determine the effectiveness of a given technology. This rating system would improve spray application practices and environmental stewardship for a wide range of crops and application scenarios.


Sign in / Sign up

Export Citation Format

Share Document