scholarly journals PENGARUH PENAMBAHAN SILICA FUME DAN GLENIUM SKY TERHADAP KUAT TEKAN BETON K-400

2020 ◽  
Vol 6 (2) ◽  
Author(s):  
Sudirman Kimi ◽  
Abdullah Abuzar Alghafari
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
Test Object ◽  
Building Construction ◽  
Raw Material ◽  
Concrete Technology ◽  
Normal Concrete ◽  
Three Stages ◽  
Compressive Strength Of Concrete

In the development of concrete technology (Concrete Technology) today which is increasingly unceasingly, along with the development of the era hence the quality of concrete selection as the main raw material of building construction is very important. This research writer take silica fume and glenium sky as added concrete mixture to know the influence of the addition of silica fume and glenium sky to the compressive strength of concrete. The research is divided into three stages : material testing, test object making and test object. This research uses cube-shaped specimen with size 15x15x15 cm, with 5 variations, they are normal concrete, silica fume 5%, silica fume 5% + glenium sky 2%, silica fume 5% + glenium sky 4%, and silica fume 5% + glenium sky 6%, which every variations has 3 test specimens with 3 days, 7 days, and 28 days. From laboratorium testing, the characteristics of compressive strength of concrete at age 28 days of normal concrete is 407,2 Kg/Cm2, normal concrete with silica fume 5% is 418,5 Kg/Cm2, normal concrete with silica fume 5% + glenium sky 2% is 435,9 Kg/Cm2, normal concrete with silica fume 5% + glenium sky 4% is 451,9 Kg/Cm2, normal concrete with silica fume 5% + glenium sky 6% is 484,1 Kg/Cm2.

scholarly journals OPTIMIZING THE USE OF ROCK ASH AS FINE AGGREGATES WITH THE ADDITION OF ADDITIVES TO THE CONCRETE MIXTURE WITH A COMPRESSIVE STRENGTH OF 350 Kg/cm2

CI-TECH ◽  
2020 ◽  
Vol 1 (01) ◽  
pp. 45-48
Author(s):  
Triaswati ◽  
Srie Subekti ◽  
Sulchan Arifin ◽  
Febri Aditya
Keyword(s):  
Compressive Strength ◽  
Test Object ◽  
Concrete Mixture ◽  
Normal Concrete ◽  
Type D ◽  
Cylinder Test ◽  
Fine Aggregates ◽  
Stone Dust ◽  
Compressive Strength Of Concrete

Stone dust nowadays is a side product of the stone crushing industry, the quality of which is quite a lot that it becomes a waste that needs to be handled. This study is intended to find out the composition of stone dust by adding some additive substance type D and type F to reach a compressive strength of 350 kg/cm2. The variation of percentage of stone dust on the composition of concrete mixture is 0%, 20%, 40%, 60%, 80%, 100%. The design of concrete mixture composition refers to the procedure of making preparation of the normal concrete mixture. SNI 03-2384-1993. The size of the cylinder test object is 15 cm in diameter and 30 cm in height. The result of this research shows that the mixture using stone dust has quite an effect on the compressive strength of concrete. From the result of the experiment, it is shown that for compressive strength of 350 kg/cm2, we can use 100% of stone dust with a resulted compressive strength of 445 kg/cm2.

scholarly journals Pengaruh Pemanfaatan Abu Tumbuhan Perumpung Terhadap Peningkatan Kuat Tekan Beton K300

Jurnal Tekno ◽  
2021 ◽  
Vol 18 (2) ◽  
pp. 11-20
Author(s):  
Ahmad Junaidi ◽  
R Dewo Hiraliyamaesa Hariyanto
Keyword(s):  
Compressive Strength ◽  
Test Object ◽  
Concrete Mixture ◽  
Wild Plant ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Compressive Strength Of Concrete ◽  
Test Objects

Perumpung (Eulalia japonica) is a wild plant that usually grows on the banks of river. The locals consider this plant as a waste/pest, but the authors are interested in researching perumpung because they are similar to bamboo, sugarcane and other fibrous plants. In this study, the authors aims to compare the compressive strength of normal concrete with the compressive strength of concrete added with Perumpung ash at 28-days-old K-300. The study used a cube-shaped test object (15 x 15 x 15 cm) with 6 samples for each condition. The total number of test objects is 48, which consists of 8 conditions, namely normal conditions and 5%, 7.5%, 10%, 12.5%, 15%, 17.5% and 20% addition of perumpung ash by cement weight. The results obtained that the compressive strength of 28-days-old concrete under normal conditions was 316,060 kg/cm2 and the addition of 5% ash was 331.583 kg/cm2, 7.5% was 337.181 kg/cm2, 10% was 341.813 kg/cm2, 12 ,5% is 347,045 kg/cm2, 15% is 353,889 kg/cm2, 17.5% is 311,160 kg/cm2 and 20% is 298.44 kg/cm2. From the results above it can be concluded that the addition of 15% Perumpung Ash to the concrete mixture increases the maximum characteristic concrete compressive strength by 353.889 kg/cm2.

scholarly journals Studi Kuat Tekan Beton Speedcrete Dengan Zat Additive Naphthalene Berdasarkan Variasi Umur

2019 ◽  
Vol 14 (2) ◽  
Author(s):  
Syifa Fauziah ◽  
Anisah Anisah ◽  
Sittati Musalamah
Keyword(s):  
Compressive Strength ◽  
Test Object ◽  
Treatment Process ◽  
Concrete Strength ◽  
Test Machine ◽  
Water Age ◽  
Normal Concrete ◽  
Compressive Strength Of Concrete ◽  
Normal Strength ◽  
Additive Materials

This research aims to determine the maximum compressive strength value of concrete speedcrete using naphthalene additive additive at each test age and compare with normal concrete 28 days. This research used cylindrical test object with diameter 15 cm and height 30 cm. Speedcrete concrete does not undergo the treatment process while the normal concrete test object through the treatment process. Testing compressive strength of concrete speedcrete using Crushing Test Machine tool. In this research the compressive strength was produced by using superplasticizer type naphthalene and compared with normal concrete without using additive. The target quality plan is fc '35 MPa with the use of additive dose of 1.7% of the weight of cement. The results of this research showed an increase in the value of compressive strength of concrete speedcrete with aadditive materials added naphthalene increased with increasing age of concrete. The results showed that the compressive strength of concrete speedcrete with naphthalene additive materials of 12 hours, 18 hours, 28 hours and 48 hours was 0.5 MPa, 17,81 MPa, 31,14 MPa and 45,77 MPa. Normal strength concrete strength with the addition of 20% water age 28 days that is equal to 54.76 MPa.

scholarly journals Pemanfaatan Hasil Pembakaran Limbah Cangkang Kelapa Sawit sebagai Bahan Pengganti Pasir pada Pembuatan Beton Normal

2017 ◽  
Vol 6 (1) ◽  
pp. 30-40
Author(s):  
Fauzi Rahman ◽  
Fathurrahman Fathurrahman
Keyword(s):  
Compressive Strength ◽  
Oil Palm ◽  
Chemical Elements ◽  
Normal Mixture ◽  
Normal Concrete ◽  
Strength Tests ◽  
Compressive Strength Of Concrete ◽  
Concrete Testing ◽  
Fresh Fruit Bunches

In 2015 the total area of oil palm plantations in Kalimantan reached 3.47 million Ha with a production of 8.12 million tons per year. Solid waste is in the form of fresh fruit bunches and palm shells. The result of combustion of oil palm shell waste in the form of boiler crust ash is a waste that has chemical elements SiO2, Al2O3, and CaO, with the content of these compounds can affect the strength of the concrete and can increase its strength. In this study, the quality of the concrete mix planned at 28 days is 23 MPa. Concrete testing included compressive strength tests carried out at 3 days, 7 days, 14 days, 28 days, 42 days and 56 days. Before making concrete samples, the mortar compressive strength is tested first by varying the boiler crust ash content by 0%, 15%, 25%, 35%, and 50% to obtain the optimum mixture. Based on the results of the analysis of compressive strength mortar obtained the optimum mixture of 15% for the manufacture of concrete that will be compared with normal concrete. The compressive strength of concrete with the optimum mixture at 28 days is 24.44 Mpa more than the compressive strength of the 23 Mpa plan. Concrete that has the highest compressive strength occurs at the age of 56 days is concrete with the normal mixture with a compressive strength of 34.44 Mpa higher than the compressive strength of concrete with an optimum mixture of 15% boiler crust ash which is 28.51 MPa.

scholarly journals PENGARUH PENAMBAHAN ABU CANGKANG KEMIRI TERHADAP KUAT TEKAN BETON K-300

2020 ◽  
Vol 3 (1) ◽  
pp. 12
Author(s):  
Moh. Abdul Basit Minanulloh ◽  
Yosef Cahyo ◽  
Ahmad Ridwan
Keyword(s):  
Compressive Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Waste Materials ◽  
Normal Concrete ◽  
Cement Additive ◽  
Compressive Strength Of Concrete ◽  
Maximum Compressive Strength ◽  
Compressive Tests

K-300 concrete is concrete that has a characteristic compressive strength of 300 kg/cm2.  Many studies that use plantation and mining waste materials are simply wasted. These wastes are in the form of kemiri shell ash, rice husk ash, and others. in this study, kemiri shell ash as a cement additive, with variations in the addition of 5%, 10%, and 15% of the weight of cement to the quality of K-300 concrete. Concrete compressive tests carried out at the age of 7 and 28 days. The purpose of this study was to determine the compressive strength of concrete, the highest pressure strength, and the optimum percentage. Strong concrete pressure characteristics obtained at 28 days at a normal concrete variation 304.127 kg / cm, normal concrete variations with the addition of 5% “Abu Cangkang kemiri” 421,551 kg / cm, normal concrete variations with the addition of 10% “Abu Cangkang kemiri” 426,863 kg / cm2, and variations  normal concrete with the addition of 15% “Abu Cangkang kemiri” 428,210 kg / cm.  The results show that the optimum percentage of the addition of kemiri shell ash is 15% of the weight of cement with a maximum compressive strength of 428,210 kg/cm.  Beton K-300 adalah beton yang mempunyai kuat tekan karakteristik sebesar 300 kg/cm². Banyak penelitian yang menggunakan bahan – bahan limbah perkebunan dan tambang yang terbuang begitu saja. Limbah tersebut berupa abu cangkang kemiri, abu sekam Padi, dan lain- lain. Pada penelitian ini menggunakan abu cangkang Kemiri sebagai bahan tambah semen, dengan variasi penambahan 5%, 10%, dan 15%  dari berat semen terhadap mutu beton K-300. Uji tekan beton dilaksanakan pada umur 7 dan 28 hari. Tujuan penelitian ini adalah untuk mengetahui kuat tekan beton dan  kuat tekan tertinggi. Kuat tekan karakteristik yang diperoleh pada umur 28 hari pada variasi beton normal 304,127 kg/cm², variasi beton normal dengan penambahan 5% abu cangkang  Kemiri 421,551 kg/cm², variasi beton normal dengan penambahan10% abu cangkang Kemiri 426,863kg/cm², dan variasi beton normal dengan penambahan 15% abu cangkang Kemiri 428,210 kg/cm². Hasil penelitian menunjukkan bahwa presentase optimum dari penambahan abu cangang Kemiri  adalah sebesar15% dari berat semen dengan kuat tekan maksimum sebesar 428,210 kg/cm².

PENGARUH PENAMBAHAN LIMBAH GIPSUM TERHADAP KUAT TEKAN BETON

2020 ◽  
Vol 2 (1) ◽  
pp. 1-12
Author(s):  
Rafki Imani ◽  
Widiawati Purba ◽  
Rainaldi S Nainggolan
Keyword(s):  
Compressive Strength ◽  
Concrete Mixture ◽  
Main Constituent ◽  
Concrete Compressive Strength ◽  
Concrete Technology ◽  
Normal Concrete ◽  
Compressive Strength Of Concrete ◽  
Waste Mixture

AbstractConcrete is composed of three main constituent materials, namely cement, aggregate and water. The development of concrete technology in the trial of adding a mixture of materials continues to be done to achieve the desired strength and quality. In this experiment, the addition of gypsum waste was used as a concrete mixture to determine its effect on the compressive strength of concrete. The variation in the percentage of the addition of gypsum waste is 5%, 10%, and 15% with the age of treatment observed at 14 days and 28 days. The results showed that the normal compressive strength value at 14 days was 186.87 kg/cm2, while with the addition of gypsum waste mixture the concrete compressive strength at 5%, 10% and 15% were obtained 178.45 kg respectively /cm2, 101, 01 kg/cm2, 70.71 kg/cm2. Meanwhile the compressive strength value of normal concrete at 28 days is 164.44 kg/cm2, and the compressive strength value of concrete after mixed with gypsum waste at 28 days is obtained 157.04 kg/cm2, 88.89 kg/cm2, 62.22 kg/cm2. Based on the results it can be concluded that the addition of gypsum waste as a concrete mixture material can reduce the compressive strength values of normal concrete.Keywords : Concrete, compressive strength, and gypsum waste.AbstrakBahan beton terdiri dari semen, pasir, kerikil dan air. Perkembangan teknologi beton dalam uji coba penambahan bahan campuran terus dilakukan untuk mendapatkan kekuatan dan mutu beton yang diinginkan. Dalam penelitian ini, penambahan limbah gipsum dimaksudkan sebagai campuran beton untuk melihat pengaruhnya pada nilai kuat tekan beton. Variasi persentase penambahan limbah gipsum ini adalah sebesar 5%, 10%, dan 15% dengan umur perawatan diamati pada umur 14 hari dan 28 hari. Hasil penelitian menunjukkan bahwa nilai kuat tekan beton normal pada umur 14 hari diperoleh sebesar 186,87 kg/cm2, sementara dengan penambahan campuran limbah gipsum nilai kuat tekan beton pada persentase 5%, 10% dan 15% secara berurutan diperoleh sebesar 178,45 kg/cm2, 101, 01 kg/cm2, 70,71 kg/cm2. Sementara nilai kuat tekan beton normal pada umur 28 hari adalah sebesar 164,44 kg/cm2, dan nilai kuat tekan beton setelah dicampur limbah gipsum pada umur 28 hari secara berurutan diperoleh sebesar 157,04 kg/cm2, 88,89 kg/cm2, 62,22 kg/cm2. Hasil penelitian menyimpulkan bahwa penambahan limbah gipsum sebagai bahan campuran beton dapat mengurangi nilai kuat tekan beton dibandingkan dengan kuat tekan beton normal. Kata kunci : Beton, kuat tekan dan limbah gipsum.

scholarly journals Pengaruh Admixture Terhadap Campuran Beton K 350 Ditinjau Dari Kuat Tekan Beton

2018 ◽  
Vol 7 (1) ◽  
pp. 19-26
Author(s):  
Rida Respati
Keyword(s):  
Compressive Strength ◽  
Water Use ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Before And After ◽  
Medium Quality ◽  
Compressive Strength Of Concrete

In this research, we want to experiment to find out the compressive strength of medium quality concrete K-350 with ingredients added MASTER RHEOBUILD 6, whose function is to accelerate hardening, improve the quality of concrete, reduce water use and increase the value of slump. However, it should be noted that errors in dosages and how to use added ingredients can be detrimental to the quality of concrete. The results of the study show that the addition of 0.25, 0.5 and 0.75 liters per 50 kg of cement can increase the concrete compressive strength. The compressive strength of concrete with the addition of 0.25 liters/50 kg of cement has increased 362.67 kg/cm� from the normal concrete compressive strength of 350.58 kg/cm2. The addition of 0.5 liters/50 kg of cement has increased again to 373.24 kg/cm�, and the addition of 0.75 liters/50 kg of cement has increased the concrete compressive strength to 379.29 kg/cm� of normal concrete. Comparison of compressive strength before and after addition of admixture with an increase of 3.45% in addition of 0.25 liters/50 kg of cement, 6.47% in addition of 0.5 liters/50 kg of cement and 8.19% in addition of 0.75 liters/50 kg of cement.

scholarly journals Testing of Nutmeg Shell as a Normal Concrete Material in Terms of Volume Weight and Compressive Strength Value

2021 ◽  
Vol 21 (3) ◽  
pp. 129-138
Author(s):  
Keyword(s):  
Compressive Strength ◽  
Specific Gravity ◽  
Concrete Aggregate ◽  
Fine Aggregate ◽  
Normal Concrete ◽  
Concrete Material ◽  
Average Value ◽  
Volume Weight ◽  
Compressive Strength Of Concrete

Normal concrete uses fine aggregate and coarse aggregate with concrete density 2200 kg/m3-2400 kg/m3 with a compressive strength of about 15-40 MPa [1]. The purpose of this study is to determine characteristics of the concrete aggregate and the compressive strength of the concrete design based on the DOE (Department of Environment) method and the SNI Standard. In this research, the use of nugmet shell was varied as follows: 0%, 0,25%, 0,50%, 0,75% and 1% of the cement weight. The results showed that the use of nutmeg shells as a normal concrete affected the specific gravity and the value compressive strength of concrete. The higher the percentage of nutmeg shells, the lower the specific gravity and compressive strength of the concrete. The average value of density to nutmeg shell concrete (NSC) 2254.72 (kg/m3) and normal concrete 2304.32 (kg/m3). The compressive strength of normal concrete is 224.2 kg/cm2 and the nutmeg shell concrete (NSC) the composition of 0.25% and 0.5% obtained by 129.6 kg/cm2 and 140.0 kg/cm2 increases the use of nutmeg shell 0.75% and 1% obtained value ​​of 117.6 kg/cm2 and 118.1 kg/cm2 decreased at the age of 28 days. The compressive strength of normal concrete 22 MPa while the maximum nutmeg shell concrete (NSC) 14 MPa, so it does not meet the quality of normal concrete in general.

scholarly journals ANALISIS PENGARUH PENAMBAHAN AGREGAT LIMBAH PLASTIK (POLYETHYLENE TEREPHATHALATE) TERHADAP KUAT TEKAN BETON

2021 ◽  
Vol 3 (3) ◽  
pp. 243-252
Author(s):  
Masril Masril ◽  
Jefry Rizaldo
Keyword(s):  
Compressive Strength ◽  
Rural Areas ◽  
Plastic Material ◽  
Plastic Waste ◽  
Fine Aggregate ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Food And Beverage ◽  
Compressive Strength Of Concrete

Plastic Material Plastic waste is a problem that is very often encountered in urban and rural areas. The use of plastic in each year will continue to increase because food and beverage products all use materials made of plastic. However, the plastic in question is plastic that is difficult to contaminate with soil or commonly referred to as inorganic waste, which is difficult to self-destruct. This is what causes the amount of plastic waste to increase.Therefore, to reduce this waste, the volume of this waste is used in the development. Besides, the grain gradation of the aggregate has been determined with the aim of obtaining an increase in the compressive strength of the concrete with the addition of plastic waste. The quality of the concrete to be examined by the authors in this study is fc = 14.5 MPa. In other words, in this study the author tries to compare the compressive strength of concrete between normal concrete and concrete mixed with plastic waste. In this study also used a variation of plastic waste substitution with a ratio of 0%, 5%, 10% to the volume of fine aggregate. For each variation, 2 samples were used which included normal concrete so that the total test object used was 12 tested at 7 days, 14 days and 28 days of concrete.From the results of testing the compressive strength of concrete against normal concrete and mixed concrete with sawdust surian at the age of 28 days, the normal concrete compressive strength is 14.5 MPa, while in the sawdust mixture with a percentage of 5%, the concrete compressive strength is 14.14 MPa. 10% obtained a compressive strength of 17.05 MPa. From this test, it can be concluded that from each of the percentages that are made, the compressive strength increases along with the percentage of the amount of plastic waste added to the concrete mixture. In other words, the greater the percentage of plastic waste used, the higher the compressive strength and quality of the concrete produced.

Variasi Penambahan Sika Cim Dan Fiber Kawat Pada Beton Mutu Fc’ 30 Mpa

2018 ◽  
Vol 9 (2) ◽  
pp. 67-73
Author(s):  
M Zainul Arifin
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Curing Temperature ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Normal Concrete ◽  
Astm Method ◽  
Additive Type ◽  
Composition Variation ◽  
Compressive Strength Of Concrete

This research was conducted to determine the value of the highest compressive strength from the ratio of normal concrete to normal concrete plus additive types of Sika Cim with a composition variation of 0.25%, 0.50%, 0.75%, 1.00%, 1.25%, 1 , 50% and 1.75% of the weight of cement besides that in this study also aims to find the highest tensile strength from the ratio of normal concrete to normal concrete in the mixture of sika cim composition at the highest compressive strength above and after that added fiber wire with a size diameter of 1 mm in length 100 mm with a ratio of 1% of material weight. The concrete mix plan was calculated using the ASTM method, the matrial composition of the normal concrete mixture as follows, 314 kg / m3 cement, 789 kg / m3 sand, 1125 kg / m3 gravel and 189 liters / m3 of water at 10 cm slump, then normal concrete added variations of the composition of sika cim 0.25%, 0.50%, 0.75%, 1.00%, 1.25%, 1.5%, 1.75% by weight of cement and fiber, the tests carried out were compressive strength of concrete and tensile strength of concrete, normal maintenance is soaked in fresh water for 28 days at 30oC. From the test results it was found that the normal concrete compressive strength at the age of 28 days was fc1 30 Mpa, the variation in the addition of the sika cim additive type mineral was achieved in composition 0.75% of the cement weight of fc1 40.2 Mpa 30C. Besides that the tensile strength test results were 28 days old with the addition of 1% fiber wire mineral to the weight of the material at a curing temperature of 30oC of 7.5%.

Sign in / Sign up

Export Citation Format

Share Document