scholarly journals THERMOPHYSICAL PROPERTIES OF ALLOY COMPOSITIONS (2Bi2O3∙B2O3)100-x(2Bi2O3∙3GeO2)x (x=0, 10, 50)

2021 ◽  
pp. 44-48
Author(s):  
S.I. Bananyarli ◽  
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Phase Transitions ◽  
Thermal Resistance ◽  
Temperature Dependence ◽  
Thermophysical Properties ◽  
Chemical Bonds ◽  
Temperature Range ◽  
The Difference

The termophisical properties, namely, the temperature dependence of thermal conductivity, thermal resistance and heat capacity of the allays compositions (2Bi2O3∙B2O3)100-x (2Bi2O3∙3GeO2)x in the (300–600) K temperature range have ligated been invest. An increase in thermal conductivity χ(T) above 500 K is probably associated with the softening of alloys and the presence of blurred phase transitions, which are accompanied by partial breaking of chemical bonds. It was revealed that the heat capacity in alloys of the compositions (2Bi2O3∙B2O3)100-x (2Bi2O3∙3GeO2)x increases with an increase in the GeO2 concentration. In the studied samples, that showed their own disorder during solidification, the thermal conductivity is strongly reduced due to the enhancement of the anharmonicity of phonon – phonon interactions. İn turn a small "disorder" introduced by defects due to the difference in masses is not noticeable against the background of the huge "disorder" inherent in oxide substances

Evidence of a Order-Disorder Transition in the Crystalline Phase of Cd6Yb, 1/1 cubic approximant of icosahedral Cd 5.7 Yb

2003 ◽  
Vol 793 ◽  
Author(s):  
N. Sorloaica ◽  
A. L. Pope ◽  
D. W. Winkler ◽  
Terry M. Tritt ◽  
V. Keppens ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Temperature Dependence ◽  
Transport Properties ◽  
Crystalline Phase ◽  
Thermal Transport ◽  
Hysteretic Behavior ◽  
Disorder Transition ◽  
Temperature Range ◽  
Thermal Transport Properties

ABSTRACTThe electrical and thermal transport properties (electrical resistivity, thermopower, heat capacity and thermal conductivity) of the crystalline phase of the binary Cd6Yb system has been measured over a temperature range from 10 K to 300 K. Evidence for a phase transition in Cd6Yb is observed in the electrical transport properties with distinct changes in the temperature dependence of the resistivity and thermopower around T ≈ 110K. An anomaly in the heat capacity and a thermal conductivity is also observed at this same temperature. Hysteretic behavior is not evident in the temperature dependence of any of the electrical and thermal transport properties. In addition, the elastic properties using resonant ultrasound (RUS) techniques have been investigated over a similar temperature range. A large “resonance dip” is observed in the RUS data at T ≈ 110K, which is indicative of some type of structural change in the crystalline material at this temperature. These data will be presented and discussed in context of the undergoes reversible order-disorder transition in the 1/1 cubic approximant at about 110 K, which makes the system very interesting compared to the quasicrystal phase Cd5.7Yb

scholarly journals Механизмы переноса тепла и температурная зависимость теплового сопротивления кристаллов CaLa-=SUB=-2-=/SUB=-S-=SUB=-4-=/SUB=-

2020 ◽  
Vol 62 (1) ◽  
pp. 186
Author(s):  
С.М. Лугуев ◽  
Н.В. Лугуева ◽  
Т.С. Лугуев
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Resistance ◽  
Temperature Dependence ◽  
Debye Temperature ◽  
Temperature Range

The results of the study of the temperature dependence of the thermal resistance of CaLa2S4 crystals in the temperature range of 80–450 K according to the measurement of their thermal conductivity are presented. The mechanisms of heat transfer in samples with different technological background are established. The causes that determine the magnitude and characteristics of the temperature dependence of the thermal resistance of CaLa2S4 crystals in the region and above the Debye temperature are revealed.

EXAMINATION OF THERMOPHYSICAL CHARACTERISTICS OF A HEAT-PROTECTIVE MATERIAL BASED ON FIBERGLASS DURING DESTRUCTION

2021 ◽  
pp. 91-97
Author(s):  
D.Ya. Barinov ◽  
◽  
S.Yu. Shorstov ◽  
M.G. Razmahov ◽  
A.I. Gulyaev ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermophysical Properties ◽  
Thermal Effects ◽  
Space Technology ◽  
Muffle Furnace ◽  
Thermophysical Characteristics ◽  
Initial State ◽  
Protective Material ◽  
Temperature Dependences

When designing advanced samples of aviation and rocket and space technology, during the operation of which the temperature on the surface of the material can exceed the temperature of destruction, it is important to have an understanding of the values of thermophysical properties. The work investigates the thermophysical properties of fiberglass in the initial state and after the binder is burned out in a muffle furnace. The temperature dependences of thermal effects, heat capacity, thermal diffusivity and thermal conductivity were determined, density was measured, and thermogravimetric analysis was carried out. Using a stereomicroscope, the microstructure of the lateral cut of the samples was examined and its evolution was determined during the burning of the binder.

scholarly journals Heat capacity of lithium tungstate single crystal by DSC calorimetry data in the temperature range of 319-997 K

2021 ◽  
Vol 2057 (1) ◽  
pp. 012048
Author(s):  
N I Matskevich ◽  
V N Shlegel ◽  
A A Chernov ◽  
D A Samoshkin ◽  
S V Stankus ◽  
...  
Keyword(s):  
Heat Capacity ◽  
Phase Transitions ◽  
Single Crystal ◽  
Weight Control ◽  
Czochralski Technique ◽  
Temperature Range ◽  
First Time ◽  
Lithium Tungstate ◽  
Dsc Calorimetry ◽  
Calorimetry Data

Abstract The heat capacity of lithium tungstate single crystal (Li2WO4) was measured for the first time in the temperature range of 319-997 K. The experiments were carried out by DSC calorimetry. The Li2WO4 single crystal was first grown by low-temperature-gradient Czochralski technique with weight control. The temperature dependence of Li2WO4 heat capacity in the temperature range 319-997 K was monotonic. According to results of our studies, there were no phase transitions in Li2WO4 in the investigated temperature range.

scholarly journals Applying the EDPS Method to the Research into Thermophysical Properties of Solid Wood of Coniferous Trees

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Ľuboš Krišťák ◽  
Rastislav Igaz ◽  
Ivan Ružiak
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Diffusivity ◽  
Moisture Content ◽  
Thermophysical Properties ◽  
Solid Wood ◽  
Plane Source ◽  
Coniferous Trees ◽  
Extended Dynamic ◽  
Dynamic Plane

The results of using the EDPS (extended dynamic plane source) method to determine thermophysical properties of solid wood of coniferous trees growing in Slovakia with 0% and 12% equilibrium moisture content are presented in the paper. Solid wood of two different tree species: Norway spruce (Picea abies L.) and Scots pine (Pinus sylvestris L.) was used in the research. The research was carried out independently in three anatomical planes. Coefficients of thermal conductivity, thermal diffusivity, and specific heat capacity were determined following the research. Comparing the research results to the values determined by other authors and already published models to calculate individual parameters, the fact that the data gathered using the EDPS method can be accepted in case of all studied thermophysical properties can be stated.

scholarly journals Thermophysical properties of BiFeO3/REE multiferroics in a wide temperature range

2020 ◽  
Vol 10 (01n02) ◽  
pp. 2060019
Author(s):  
Sidek Khasbulatov ◽  
Suleiman Kallaev ◽  
Haji Gadjiev ◽  
Zairbek Omarov ◽  
Abumuslim Bakmaev ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Rare Earth ◽  
High Temperature ◽  
Thermal Diffusivity ◽  
Rare Earth Elements ◽  
Wide Temperature Range ◽  
Thermophysical Properties ◽  
Multiferroic Bifeo ◽  
Comprehensive Study

The paper presents the results of a comprehensive study of the thermophysical properties (thermal conductivity, thermal diffusivity, heat capacity) of high-temperature multiferroic BiFeO3 modified with rare-earth elements (REEs) (La, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Lu). The regularities of the formation of the mentioned characteristics were established. The assumptions about the nature of the observed phenomena were suggested.

Heat Capacity and Thermodynamic Properties of LaBr3 at 300 – 1100 K

2004 ◽  
Vol 59 (11) ◽  
pp. 825-828
Author(s):  
L. Rycerz ◽  
E. Ingier-Stocka ◽  
B. Ziolek ◽  
S. Gadzuric ◽  
M. Gaune-Escard
Keyword(s):  
Differential Scanning Calorimetry ◽  
Heat Capacity ◽  
Thermodynamic Properties ◽  
Temperature Dependence ◽  
Enthalpy Of Formation ◽  
Thermodynamic Functions ◽  
Molar Enthalpy ◽  
Standard Molar Enthalpy ◽  
Scanning Calorimetry ◽  
Temperature Range

The heat capacity of solid and liquid LaBr3 was measured by Differential Scanning Calorimetry (DSC) in the temperature range 300 - 1100 K. The obtained results were fitted by a polynomial temperature dependence. The enthalpy of fusion of LaBr3 was also measured. By combination of these results with the literature data on the entropy, S0m (LaBr3, s, 298.15 K) and the standard molar enthalpy of formation, ΔformH0m (LaBr3, s, 298.15 K), the thermodynamic functions of lanthanum tribromide were calculated up to 1300 K

Sign in / Sign up

Export Citation Format

Share Document