scholarly journals A life cycle assessment model of Canadian residential dwellings and building stocks

2021 ◽  
Author(s):  
Matthew Francis Bowick
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Data Storage ◽  
Energy Use ◽  
Assessment Model ◽  
Cycle Performance ◽  
Building Stock ◽  
Efficiency Measures ◽  
Performance Trends ◽  
Environmental Performance Measurement

Life Cycle Assessment (LCA) is an internationally recognized and scientifically based methodology to quantify the environmental impact of a product or service, typically from cradle-to-grave. The life cycle performance of housing is influenced by the interdependent nature of material and energy use, and dwelling location and service life. While much research has been conducted building LCA, its incorporation into regulation has been difficult to implement. This research outlines the methodology used to create an LCA database of new Canadian construction for the purpose of building stock modeling and benchmarking national construction practice, two key tools for higher level decision making. A software program has been developed to handle data storage and calculations. Results presented include general performance trends at various sector scales, and analysis comparing LCA to traditional environmental performance measurement, and sensitivity analysis of building material and operating energy fuel choice and energy efficiency measures.

scholarly journals A life cycle assessment model of Canadian residential dwellings and building stocks

2021 ◽  
Author(s):  
Matthew Francis Bowick
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Data Storage ◽  
Energy Use ◽  
Assessment Model ◽  
Cycle Performance ◽  
Building Stock ◽  
Efficiency Measures ◽  
Performance Trends ◽  
Environmental Performance Measurement

Life Cycle Assessment (LCA) is an internationally recognized and scientifically based methodology to quantify the environmental impact of a product or service, typically from cradle-to-grave. The life cycle performance of housing is influenced by the interdependent nature of material and energy use, and dwelling location and service life. While much research has been conducted building LCA, its incorporation into regulation has been difficult to implement. This research outlines the methodology used to create an LCA database of new Canadian construction for the purpose of building stock modeling and benchmarking national construction practice, two key tools for higher level decision making. A software program has been developed to handle data storage and calculations. Results presented include general performance trends at various sector scales, and analysis comparing LCA to traditional environmental performance measurement, and sensitivity analysis of building material and operating energy fuel choice and energy efficiency measures.

Decision support for sustainable development using a Canadian economic input–output life cycle assessment model

2005 ◽  
Vol 32 (1) ◽  
pp. 16-29 ◽  
Author(s):  
Andrew Bjorn ◽  
Laura Declercq-Lopez ◽  
Sabrina Spatari ◽  
Heather L MacLean
Keyword(s):  
Decision Making ◽  
Sustainable Development ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Use ◽  
Construction Materials ◽  
Assessment Model ◽  
Development Economic ◽  
Input Output ◽  
Full Life Cycle

The environmental and human health impacts of engineering activities have reshaped the way engineers make decisions. Increasingly, engineering decision-making is taking into consideration the full life cycle implications of engineering activities. This paper details the development and application of a national economic input–output-based life cycle assessment model, a tool for guiding engineering decision-making, for the Canadian economy. The model consists of 61 industries and 103 commodities and incorporates economic and environmental–resource data, including marginal resource consumption, energy use, releases of National Pollutant Release Inventory compounds, and emissions of greenhouse gases. The model is useful for evaluating various development strategies and analyzing the potential direct and indirect impacts of alternative public policies on the Canadian economy and environment. The model is applied to various sectors of the Canadian economy, and the life-cycle implications of demands for different commodities are determined, including demand for electricity and construction materials for highway design.Key words: life cycle assessment–analysis, sustainable development, economic input–output.

scholarly journals Life Cycle Assessment of Building Renovation Measures–Trade-off between Building Materials and Energy

Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 344 ◽  
Author(s):  
Ricardo Ramírez-Villegas ◽  
Ola Eriksson ◽  
Thomas Olofsson
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Building Materials ◽  
Energy Use ◽  
Ventilation System ◽  
Cold Climate ◽  
Solar Irradiation ◽  
The European Union ◽  
Building Stock

The scope of this study is to assess how different energy efficient renovation strategies affect the environmental impacts of a multi-family house in a Nordic climate within district heating systems. The European Union has set ambitious targets to reduce energy use and greenhouse gas emissions by the year 2030. There is special attention on reducing the life cycle emissions in the buildings sector. However, the focus has often been on new buildings, although existing buildings represent great potential within the building stock in Europe. In this study, four different renovation scenarios were analyzed with the commercially available life cycle assessment software that follows the European Committee for Standardization (CEN) standard. This study covers all life cycle steps from the cradle to the grave for a residential building in Borlänge, Sweden, where renewable energy dominates. The four scenarios included reduced indoor temperature, improved thermal properties of building material components and heat recovery for the ventilation system. One finding is that changing installations gives an environmental impact comparable to renovations that include both ventilation and building facilities. In addition, the life cycle steps that have the greatest environmental impact in all scenarios are the operational energy use and the building and installation processes. Renovation measures had a major impact on energy use due to the cold climate and low solar irradiation in the heating season. An interesting aspect, however, is that the building materials and the construction processes gave a significant amount of environmental impact.

scholarly journals Case study of a water bioengineering construction site in Austria. Ecological aspects and application of an environmental life cycle assessment model

2021 ◽  
Author(s):  
M. von der Thannen ◽  
S. Hoerbinger ◽  
C. Muellebner ◽  
H. Biber ◽  
H. P. Rauch
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Demand ◽  
Assessment Model ◽  
Construction Site ◽  
Negative Effects ◽  
Environmental Life Cycle Assessment ◽  
The Impact ◽  
Soil And Water

AbstractRecently, applications of soil and water bioengineering constructions using living plants and supplementary materials have become increasingly popular. Besides technical effects, soil and water bioengineering has the advantage of additionally taking into consideration ecological values and the values of landscape aesthetics. When implementing soil and water bioengineering structures, suitable plants must be selected, and the structures must be given a dimension taking into account potential impact loads. A consideration of energy flows and the potential negative impact of construction in terms of energy and greenhouse gas balance has been neglected until now. The current study closes this gap of knowledge by introducing a method for detecting the possible negative effects of installing soil and water bioengineering measures. For this purpose, an environmental life cycle assessment model has been applied. The impact categories global warming potential and cumulative energy demand are used in this paper to describe the type of impacts which a bioengineering construction site causes. Additionally, the water bioengineering measure is contrasted with a conventional civil engineering structure. The results determine that the bioengineering alternative performs slightly better, in terms of energy demand and global warming potential, than the conventional measure. The most relevant factor is shown to be the impact of the running machines at the water bioengineering construction site. Finally, an integral ecological assessment model for applications of soil and water bioengineering structures should point out the potential negative effects caused during installation and, furthermore, integrate the assessment of potential positive effects due to the development of living plants in the use stage of the structures.

scholarly journals A scalable and spatiotemporally resolved agricultural life cycle assessment of California almonds

2021 ◽  
Author(s):  
Elias Marvinney ◽  
Alissa Kendall
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Water Supply ◽  
Energy Use ◽  
Energy Intensity ◽  
Central Valley ◽  
San Joaquin Valley ◽  
Impact Categories ◽  
Freshwater Use ◽  
California's Central Valley

Abstract Purpose California’s Central Valley produces more than 75% of global commercial almond supply, making the life cycle performance of almond production in California of global interest. This article describes the life cycle assessment of California almond production using a Scalable, Process-based, Agronomically Responsive Cropping System Life Cycle Assessment (SPARCS-LCA) model that includes crop responses to orchard management and modeling of California’s water supply and biomass energy infrastructure. Methods A spatially and temporally resolved LCA model was developed to reflect the regional climate, resource, and agronomic conditions across California’s Central Valley by hydrologic subregion (San Joaquin Valley, Sacramento Valley, and Tulare Lake regions). The model couples a LCA framework with region-specific data, including water supply infrastructure and economics, crop productivity response models, and dynamic co-product markets, to characterize the environmental performance of California almonds. Previous LCAs of California almond found that irrigation and management of co-products were most influential in determining life cycle CO2eq emissions and energy intensity of California almond production, and both have experienced extensive changes since previous studies due to drought and changing regulatory conditions, making them a focus of sensitivity and scenario analysis. Results and discussion Results using economic allocation show that 1 kg of hulled, brown-skin almond kernel at post-harvest facility gate causes 1.92 kg CO2eq (GWP100), 50.9 MJ energy use, and 4820 L freshwater use, with regional ranges of 2.0–2.69 kg CO2eq, 42.7–59.4 MJ, and 4540–5150 L, respectively. With a substitution approach for co-product allocation, 1 kg almond kernel results in 1.23 kg CO2eq, 18.05 MJ energy use, and 4804 L freshwater use, with regional ranges of 0.51–1.95 kg CO2eq, 3.68–36.5 MJ, and 4521–5140 L, respectively. Almond freshwater use is comparable with other nut crops in California and globally. Results showed significant variability across subregions. While the San Joaquin Valley performed best in most impact categories, the Tulare Lake region produced the lowest eutrophication impacts. Conclusion While CO2eq and energy intensity of almond production increased over previous estimates, so too did credits to the system for displacement of dairy feed. These changes result from a more comprehensive model scope and improved assumptions, as well as drought-related increases in groundwater depth and associated energy demand, and decreased utilization of biomass residues for energy recovery due to closure of bioenergy plants in California. The variation among different impact categories between subregions and over time highlight the need for spatially and temporally resolved agricultural LCA.

scholarly journals Life-Cycle Assessment of a Rural Terraced House: A Struggle with Sustainability of Building Renovations

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2472
Author(s):  
Karel Struhala ◽  
Milan Ostrý
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Energy Sources ◽  
Construction Sector ◽  
Building Stock ◽  
Existing Building ◽  
New Construction ◽  
Consumption Energy

Contemporary research stresses the need to reduce mankind’s environmental impacts and achieve sustainability. One of the keys to this is the construction sector. New buildings have to comply with strict limits regarding resource consumption (energy, water use, etc.). However, they make up only a fraction of the existing building stock. Renovations of existing buildings are therefore essential for the reduction of the environmental impacts in the construction sector. This paper illustrates the situation using a case study of a rural terraced house in a village near Brno, Czech Republic. It compares the life-cycle assessment (LCA) of the original house and its proposed renovation as well as demolition followed by new construction. The LCA covers both the initial embodied environmental impacts (EEIs) and the 60-year operation of the house with several variants of energy sources. The results show that the proposed renovation would reduce overall environmental impacts (OEIs) of the house by up to 90% and the demolition and new construction by up to 93% depending on the selected energy sources. As such, the results confirm the importance of renovations and the installation of environmentally-friendly energy sources for achieving sustainability in the construction sector. They also show the desirability of the replacement of inefficient old buildings by new construction in specific cases.

scholarly journals LIFE CYCLE ASSESSMENT OF TECHNICAL BUILDING SERVICES OF LARGE RESIDENTIAL BUILDING STOCKS USING SEMANTIC 3D CITY MODELS

2020 ◽  
Vol VI-4/W1-2020 ◽  
pp. 85-92
Author(s):  
H. Harter ◽  
B. Willenborg ◽  
W. Lang ◽  
T. H. Kolbe
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Demand ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Stock ◽  
3D City Models ◽  
Methodical Approach ◽  
Operational Energy ◽  
City Models

Abstract. Reducing the demand for non-renewable resources and the resulting environmental impact is an objective of sustainable development, to which buildings contribute significantly. In order to realize the goal of reaching a climate-neutral building stock, it must first be analyzed and evaluated in order to develop optimization strategies. The life cycle based consideration and assessment of buildings plays a key role in this process. Approaches and tools already exist for this purpose, but they mainly take the operational energy demand of buildings and not a life cycle based approach into account, especially when assessing technical building services (TBS). Therefore, this paper presents and applies a methodical approach for the life cycle based assessment of the TBS of large residential building stocks, based on semantic 3D city models (CityGML). The methodical approach developed for this purpose describes the procedure for calculating the operational energy demand (already validated) and the heating load of the building, the dimensioning of the TBS components and the calculation of the life cycle assessment. The application of the methodology is illustrated in a case study with over 115,000 residential buildings from Munich, Germany. The study shows that the methodology calculates reliable results and that a significant reduction of the life cycle based energy demand can be achieved by refurbishment measures/scenarios. Nevertheless, the goal of achieving a climate-neutral building stock is a challenge from a life cycle perspective.

scholarly journals Barriers to handpump serviceability in Malawi: life-cycle costing for sustainable service delivery

2020 ◽  
Vol 6 (8) ◽  
pp. 2138-2152
Author(s):  
Jonathan P. Truslove ◽  
Andrea B. Coulson ◽  
Emma Mbalame ◽  
Robert M. Kalin
Keyword(s):  
Regression Analysis ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Service Delivery ◽  
Water Supply ◽  
Rural Community ◽  
Life Cycle Costing ◽  
Assessment Model ◽  
Community Water

Life-cycle assessment model and regression analysis identifies drivers that negatively impact the lifecycle of community Afridev handpumps under various tariff scenarios for rural community water supply.

Sign in / Sign up

Export Citation Format

Share Document