scholarly journals An analysis of fresh, mechanical and durability properties of lightweight self-consolidating fiber reinforced concrete

2021 ◽  
Author(s):  
Imge Nicole Celasun
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Chloride Ion ◽  
Crumb Rubber ◽  
Fiber Content ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Acid Attack ◽  
Chloride Permeability

This research investigated the fresh, mechanical and durability behavior of lightweight self-consolidating fiber reinforced concrete (LWSCFRC) with four different fibers (Polyethylene, Polyvinyl Alcohol, High-Density Polyethylene and Crumb Rubber). Two LWSCFRC mixtures were created for each fiber to analyze the effects of increasing fiber content on fresh state properties: slump flow and density. Mechanical and durability tests included compressive/ flexural strength, rapid chloride permeability and resistance to acid attack. The increase in fiber content decreased the workability of LWSCFRC mixtures except for crumb rubber. Flexural strength of all LWSCFRC specimens was similar compared to their control counterparts, while crumb rubber exhibited the highest compressive strength from all fiber specimens. Addition of fibers resulted in good resistance against chloride ion penetration but compressive strength of specimens in a 5% sulfuric acid solution decreased. Overall, 1.0% Crumb Rubber performed better in fresh, mechanical and durability testing from all the fiber specimens.

scholarly journals An analysis of fresh, mechanical and durability properties of lightweight self-consolidating fiber reinforced concrete

2021 ◽  
Author(s):  
Imge Nicole Celasun
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Chloride Ion ◽  
Crumb Rubber ◽  
Fiber Content ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Acid Attack ◽  
Chloride Permeability

This research investigated the fresh, mechanical and durability behavior of lightweight self-consolidating fiber reinforced concrete (LWSCFRC) with four different fibers (Polyethylene, Polyvinyl Alcohol, High-Density Polyethylene and Crumb Rubber). Two LWSCFRC mixtures were created for each fiber to analyze the effects of increasing fiber content on fresh state properties: slump flow and density. Mechanical and durability tests included compressive/ flexural strength, rapid chloride permeability and resistance to acid attack. The increase in fiber content decreased the workability of LWSCFRC mixtures except for crumb rubber. Flexural strength of all LWSCFRC specimens was similar compared to their control counterparts, while crumb rubber exhibited the highest compressive strength from all fiber specimens. Addition of fibers resulted in good resistance against chloride ion penetration but compressive strength of specimens in a 5% sulfuric acid solution decreased. Overall, 1.0% Crumb Rubber performed better in fresh, mechanical and durability testing from all the fiber specimens.

Mechanical properties of steel fiber reinforced concrete material in construction of road bridge deck

2021 ◽  
Vol 16 (4) ◽  
pp. 169-176
Author(s):  
Xiaohu Luo
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Steel Fiber ◽  
Fiber Content ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Bridge Construction

In order to improve the application effect of steel fiber reinforced concrete (SFRC) in road bridge construction, the mechanical properties of SFRC with different fiber content were analyzed. The SFRC specimens with 0%, 0.5%, 1%, 1.5% and 2% fiber content were designed, and the mechanical properties were tested. The results showed that the compressive strength first increased and then decreased with the increase of fiber content, and the maximum compressive strength of SFRC1.5 reached 40.86 MPa, increasing by 7.19%; the increase amplitude of tensile strength of SFRC1.5 was 73.04%, which was the most obvious; the flexural strength of SFRC increased with the increase of fiber content, and the flexural strength of SFRC2 was 9.78 MPa, increasing by 94.43%. It is concluded from the experimental results of a case study that SFRC1.5 presents the optimal overall mechanical properties and is more suitable for road bridge construction.

Polypropylene Fiber Reinforced Concrete for Airport Rigid Pavements: Compressive and Flexural Strength

2011 ◽  
Vol 219-220 ◽  
pp. 1601-1607 ◽  
Author(s):  
Tammam Merhej ◽  
Xin Kai Li ◽  
De Cheng Feng
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Volume Fraction ◽  
Linear Regression Analysis ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Rigid Pavements ◽  
Polypropylene Fiber Reinforced Concrete

This paper presents the experimental investigation carried out to study the behavior of polypropylene fiber reinforced concrete (PPFRC) under compression and flexure. Crimped polypropylene fibers and twisted polypropylene fiber were used with 0.0%, 0.2%, 0.4% and 0.6% volume fractions. The influence of the volume fraction of each shape of polypropylene fiber on the compressive strength and flexural strength is presented. Empirical equations to predict the effect of polypropylene fiber on compressive and flexural strength of concrete were proposed using linear regression analysis. An increase of 27% in flexural strength was obtained when 0.6% volume fraction of twisted polypropylene fiber was added. It was also found that the contribution of fiber in flexural strength is more effective when twisted fibers were used. The compressive strength was found to be less affected by polypropylene fiber addition.

scholarly journals Performance of Cracked Ultra-High-Performance Fiber-Reinforced Concrete Exposed to Dry-Wet Cycles of Chlorides

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Longlong Niu ◽  
Shiping Zhang
Keyword(s):  
Reinforced Concrete ◽  
Flexural Strength ◽  
High Performance ◽  
Chloride Ion ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Self Healing ◽  
Fiber Reinforced ◽  
High Performance Fiber ◽  
Corrosion Of Steel

This paper presents an experimental study on the performance of cracked ultra-high-performance fiber-reinforced concrete (UHPC) exposed to dry-wet cycles of 3.5% NaCl solution under the temperature of 60°C. The results show that the wider the crack, the higher the corrosion degree of steel fibers embedded in UHPC, and the deeper the chloride ion diffusion on both sides of the crack. With the increase of dry-wet cycles, the flexural strength of precracked UHPC first decreases and then increases, and the lowest flexural strength was observed in 60 dry-wet cycles. Although self-healing is hard to cease the corrosion of steel fibers, it can relieve the corrosion of steel fibers and improve the flexural strength exposed to 100 dry-wet cycles.

Experimental Study of the Mechanical Properties of Hybrid Fiber Reinforced Concrete

2009 ◽  
Vol 610-613 ◽  
pp. 69-75
Author(s):  
Yuan Hua ◽  
Tai Quan Zhou
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Aspect Ratio ◽  
Flexural Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Reinforced Fiber ◽  
Reinforced Materials

Different kinds of fiber are used to reinforce the concrete to improve the concrete mechanical properties. The high modulus and high flexibility fibers are often used to reinforce in the cement base, which leads to the higher performance compound cement based materials. In the paper, the carbon fiber and glass fiber material are used as flexibility reinforced materials. The polypropylene fiber and the polyethylene fiber are used as strength reinforced materials. The combinations of the flexibility reinforced fiber and strength reinforced fiber are chosen as C-P HF (Carbon and Polypropylene Hybrid Fiber) and G-Pe HF (Glass and Polyethylene Hybrid Fiber). The concrete mixture ratio and the fiber-reinforced amount are determined to the author’s previous study. The relationship between compressive strength, flexural strength and length/diameter aspect ratio of fiber for the carbon and polypropylene hybrid fiber reinforced concrete (C-P HFRC), and for the glass and polyethylene hybrid fiber reinforced concrete (G--Pe HFRC) was tested and discussed. The testing results show that length/diameter aspect ratio of fiber obviously affects the flexural strength of C-P HFRC and G-Pe HFRC, though the compressive strength is slightly affected by the length-diameter aspect ratio.

scholarly journals Experimental Study on Fiber Reinforced Concrete Using PVA Fiber and Glass Powder

2021 ◽  
Vol 9 (8) ◽  
pp. 2707-2713
Author(s):  
Vrushabh K. Hulle
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Flexural Strength ◽  
Polyvinyl Alcohol ◽  
Glass Powder ◽  
Strength Test ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Conventional Concrete ◽  
Pva Fiber

Abstract: Concrete consisting of cement, water, fine and coarse aggregates are widely used in civil engineering constructions. Though making concrete is convenient and inexpensive, its brittle behavior upon tensile loading is one of its undesirable characteristics so that leads to the development of fiber reinforced concrete or engineered cementitious composites to improve this deficient. The Flexural strength of PVA (polyvinyl alcohol) FRC (fiber reinforced concrete) can be 150-200% greater than for normal concrete. According to Structural designers the damage tolerance and inherent tight crack width control of PVA FRC is found to be impressive in recent full-scale structural applications. If proper volume fractions are used the compressive strength PVA FRC can be similar to that of conventional concrete. The aim of this research work is to study compressive and tensile strength of FRC consisting PVA fiber & glass powder and studying the effect of glass powder in it. This research also gives rough idea on crack resistance capacity of FRC. In this paper we studied and provided detailed review on properties of PVA FRC with glass powder and experimentally identified the best ECC mix by analyzing the compressive & the flexural strength at different ratios like 0.5%, 1%, 1.5% of PVA fiber of total dry mix weight and in each case 15% of fine aggregate was replaced by glass powder. By conducting the compressive strength test and flexural strength test the maximum result we get at 28 days is 28.38Mpa and 8.95Mpa respectively which is more durable as compared to conventional concrete by IS 516:1959. So by analysis of results it can be seen that 1% mix is found to be optimum in all aspects. Keywords: PVA FRC, Polyvinyl Alcohol, Fibre Reinforced Concrete, Glass Powder.

scholarly journals Durability Study of Hybrid Fiber Reinforced Concrete

2021 ◽  
Vol 11 (1) ◽  
pp. 59-69
Author(s):  
Srinivasa Rao Naraganti
Keyword(s):  
Reinforced Concrete ◽  
Water Absorption ◽  
Cement Composite ◽  
Strength Loss ◽  
Fiber Reinforced Concrete ◽  
Sisal Fiber ◽  
Fiber Reinforced ◽  
Acid Attack ◽  
Chloride Permeability ◽  
Sisal Fibers

Sisal has been reported as one of the promising fibers for cement composite applications. The durability of sisal fiber reinforced concrete (SFRC) and steel sisal fiber reinforced concrete (SSFRC) have not been reported. Water absorption, rapid chloride permeability, and acid attack tests are conducted on fibrous cement composites. Steel, polypropylene, and sisal fibers with a total volume of 0.50%, 1.00%, 1.25%, and 1.50% were used. Sisal at a content of 1.50% in SFRC increases the water absorption by 76%, but it is reduced to 30% for SSFRC with 0.2% of sisal content. SFRC and SSFRC show the increased permeability of 1.69% and 2.09% respectively. SFRC experiences the highest volume loss of 6.52%. SSFRC illustrates the resistance to the mass loss and compressive strength loss. In conclusion, untreated sisal in any form is found to be not advantageous for durable fibrous concrete structures.

scholarly journals Experimental Study on the Mechanical Properties of Amorphous Alloy Fiber-Reinforced Concrete

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Chaohua Jiang ◽  
Yizhi Wang ◽  
Wenwen Guo ◽  
Chen Jin ◽  
Min Wei
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Amorphous Alloy ◽  
Flexural Strength ◽  
Concrete Strength ◽  
Splitting Tensile Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced

With great mechanical properties and corrosion resistance, amorphous alloy fiber (AAF) is a highly anticipated material in the fiber-reinforced concrete (FRC) field. In this study, the mechanical properties of AAFRC such as compressive strength, tensile strength, and flexural strength were examined. The comparison and analysis between AAFRC and steel fiber-reinforced concrete (SFRC) were also carried out. The results show that adding fibers significantly improves the concrete strength and toughness index. Compared with plain concrete, the compressive strength, splitting tensile strength, and flexural strength of AAFRC increase by 8.21–16.72%, 10.4–32.8%, and 18.12–45.21%, respectively. Meanwhile, the addition of AAF with a greater tensile strength and larger unit volume quantity improves the splitting tensile strength and flexural strength of concrete more noticeably than that of SF. Adding AAF improves the ductility of concrete more significantly in comparison to the SF. AAFRC shows great interfacial bonding performance as well. A prediction equation for the strength of AAFRC was proposed, which verified good accuracy calibrated based on the test results.

Sign in / Sign up

Export Citation Format

Share Document