scholarly journals Physio-mechanical & wear performance of banana fiber/walnut powder based epoxy composites

2021 ◽  
pp. 42-55
Author(s):  
Surya P Gairola ◽  
Yogesh Tyagi ◽  
Brijesh Gangil ◽  
Kanishk Jha
Keyword(s):  
Mechanical Properties ◽  
Natural Fibers ◽  
Synthetic Fiber ◽  
Walnut Shell ◽  
Banana Fiber ◽  
Wear Performance ◽  
Banana Fibers ◽  
Composite Fabrication ◽  
Sustainable Materials ◽  
Shell Powder

The present environmental condition indicates the immediate need for sustainable materials containing mainly natural elements for composite fabrication. Encouragement of natural fibers in composite materials can significantly reduce the greenhouse effect and the high cost of manufacturing synthetic fiber-based polymer composites. Hence, this study aimed to investigate the physio-mechanical properties of banana fiber (BF) fiber -based epoxy (EP) composites filled with walnut shell powder (WNP). Fabrication was carried out by mixing and cold pressing with fixed BF proportion and varying percentages of WNP (0%, 5%, 10%, 15 wt. %). The results obtained in the study suggest the mechanical properties of the BF/EP composite were enhanced with the addition of WNP as a filler. This is because the WNP filler occupies the spaces in the composite, which bridge the gaps between the banana fibers and the epoxy matrix; also, the inclusion of walnut powder in the BF/EP composites greatly enhanced their wear resistance. The microstructural properties of the composites were examined by scanning electron microscopy (SEM).

scholarly journals Banana Fiber-Reinforced Epoxy Composites: Mechanical Properties and Fire Retardancy

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Tuan Anh Nguyen ◽  
Thi Huong Nguyen
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Natural Fiber ◽  
Average Length ◽  
Natural Fibers ◽  
Structural Morphology ◽  
Banana Fiber ◽  
Limiting Oxygen Index ◽  
Banana Fibers ◽  
Ecological Concern

Currently, the growing field of technology has paved the way for using environmental friendly resources; in particular, plant origin holds ecological concern and renewable aspects. Currently, natural fiber composites have widening attention, thanks to their eco-friendly properties. In the present work, the composite material is reinforced with natural fibers from the bark of banana trees (banana fibers), a material available in Vietnam. Banana fibers are extracted from banana peels, pretreated with NaOH 5%, and then cut to an average length of 30 mm. Banana fiber is reinforced for epoxy resin Epikote 240 with mass percents: 10 wt.%, 15 wt.%, 20 wt.%, and 25 wt.%. The results were evaluated through structural morphology (SEM), mechanical properties, fire resistance, and thermal properties. Experimental results show that the tensile, compressive, and impact strengths of biosynthetic materials up to 20% by weight have increased compared to epoxy neat. Flame retardant and thermal properties are kept stable; 20 wt.% banana fiber gives a limiting oxygen index of 20.8% and satisfactory thermal stability.

Processing of high weight fraction banana fiber reinforced epoxy composites using pressure induced dip casting method

2021 ◽  
pp. 002199832098804
Author(s):  
TP Mohan ◽  
K Kanny
Keyword(s):  
Matrix Composite ◽  
Epoxy Polymer ◽  
Epoxy Composite ◽  
Matrix Material ◽  
Natural Fibers ◽  
Weight Fraction ◽  
Polymer Composite Material ◽  
Fiber Reinforced ◽  
Banana Fiber ◽  
Banana Fibers

The objective of this work is to realize new polymer composite material containing high amount of natural fibers as a bio-based reinforcement phase. Short banana fiber is chosen as a reinforcement material and epoxy polymer as a matrix material. About 77 wt.% of banana fibers were reinforced in the epoxy polymer matrix composite, using pressure induced fiber dipping method. Nanoclay particles were infused into the banana fibers to improve the fiber matrix interface properties. The nanoclay infused banana fiber were used to reinforce epoxy composite and its properties were compared with untreated banana fiber reinforced epoxy composite and banana fiber reinforced epoxy filled with nanoclay matrix composite. The surface characteristics of these composites were examined by electron microscope and the result shows well dispersed fibers in epoxy matrix. Thermal (thermogravimetry analysis and dynamic mechanical analysis), mechanical (tensile and fiber pullout) and water barrier properties of these composites were examined and the result showed that the nanoclay infused banana fiber reinforced epoxy composite shows better and improved properties. Improved surface finish composite was also obtained by this processing technique.

Development of Banana/Coir Natural Fibers Reinforced Polypropylene Hybrid Composites: The Effect of MA-g-PP (Maleic Anhydride Grafted Polypropylene) on Mechanical Properties and Thermal Properties

2021 ◽  
Vol 32 ◽  
pp. 85-97
Author(s):  
Gunturu Bujjibabu ◽  
Vemulapalli Chittaranjan Das ◽  
Malkapuram Ramakrishna ◽  
Konduru Nagarjuna
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Coupling Agent ◽  
Mechanical Performance ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Mechanical Tests ◽  
Coir Fiber ◽  
Banana Fiber ◽  
C Fibers

Banana/Coir fiber reinforced polypropylene hybrid composites was formulated by using twin screw extruder and injection molding machine. Specimens were prepared untreated and treated B/C Hybrid composites with 4% and 8% of MA-g-PP to increase its compatibility with the polypropylene matrix. Both the without MA-g-PP and with MA-g-PP B/C hybrid composites was utilized and three levels of B/C fiber loadings 15/5, 10/10 and 5/15 % were used during manufacturing of B/C reinforced polypropylene hybrid composites. In this work mechanical performance (tensile, flexural and impact strengths) of untreated and treated (coupling agent) with 4% and 8% of MA-g-PP B/C fibers reinforced polypropylene hybrid composite have been investigated. Treated with MA-g-PP B/C fibers reinforced specimens explored better mechanical properties compared to untreated B/C fibers reinforced polypropylene hybrid composites. Mechanical tests represents that tensile, flexural and impact strength increases with increase in concentration of coupling agent compared to without coupling agent MA-g-PP hybrid composites . B/C fibers reinforced polymer composites exhibited higher tensile, flexural and impact strength at 5% of Banana fiber, 15% of fiber Coir in the presence of 8% of MA-g-PP compared to 4% of MA-g-PP and untreated hybrid composites. The percentage of water absorption in the B/C fibers reinforced polypropylene hybrid composites resisted due to the presence of coupling agent MA-g-PP and thermogravimetry analysis (TGA) also has done.

Surface Modification of Banana Fiber and its Influence on Performance of Biodegradable Banana-Cassava Starch Composites

2019 ◽  
Vol 895 ◽  
pp. 15-20
Author(s):  
Raghavendra Subramanya ◽  
S.S. Prabhakara
Keyword(s):  
Mechanical Properties ◽  
Surface Modification ◽  
Alkali Treatment ◽  
Natural Fibers ◽  
Cassava Starch ◽  
Banana Fiber ◽  
Synthetic Fibers ◽  
Lignocellulosic Fibers ◽  
Biodegradable Composites ◽  
Banana Fibre

Natural fibers, in particularly lignocellulosic fibers are attracting material scientists now days, due to their comparative advantages over synthetic fibers. Biodegradable composites reinforced with short banana fibre after alkali treatment along with cassava starch matrix were prepared using the hot compression method. The mechanical properties like tensile strength and impact strength were investigated. Mechanical properties of the composites made from alkali treated fibres were superior to the untreated fibres. SEM observations on the fracture surface of composites showed that the surface modification of the fibre occurred and improved fibre–matrix adhesion. Keywords: Surface modification; banana fiber; Biodegradable composites; Mechanical properties; Matrix.

Preparation and Mechanical Characterization of Jute-PP and Coir-PP Bio-Composites

2015 ◽  
Vol 766-767 ◽  
pp. 122-132
Author(s):  
Tippusultan ◽  
V.N. Gaitonde
Keyword(s):  
Mechanical Properties ◽  
Research Work ◽  
Natural Fibers ◽  
Weight Ratio ◽  
Synthetic Fiber ◽  
Synthetic Fibers ◽  
Fiber Loading ◽  
High Initial Cost ◽  
Full Factorial

Polymers reinforced with synthetic fibers such as glass and carbon offer advantages of high stiffness and strength to weight ratio compared to conventional materials. Despite these advantages, the prevalent use of synthetic fiber-reinforced polymer composite has a tendency to demur because of high initial cost and most importantly their adverse environmental impact. On the contrary, the increased interest in using natural fibers as reinforcement in plastics to substitute conventional synthetic fibers in automobile applications has become one of the main concerns to study the potential of using natural fibers as reinforcement for polymers. In this regard, an investigative study has been carried out to make potential utilization of natural fibers such as Jute and Coir as reinforcements, which are cheap and abundantly available in India. The objective of the present research work is to study the effects of fiber loading and particle size; fiber loading and fiber length on the mechanical properties of Jute-PP and Coir-PP bio-composites respectively. The experiments were planned as per full factorial design (FFD) and response surface methodology (RSM) based second order mathematical models of mechanical properties have been developed. Analysis of variance (ANOVA) has been employed to check the adequacy of the developed models. From the parametric analysis, it is revealed that Jute-PP bio-composites exhibit better mechanical properties when compared to Coir-PP bio-composites.

Characterization of Banana Fibers Functional Groups by Infrared Spectroscopy

2014 ◽  
Vol 775-776 ◽  
pp. 250-254 ◽  
Author(s):  
Sergio Neves Monteiro ◽  
Frederico Muylaert Margem ◽  
Rômulo Leite Loiola ◽  
Foluke Salgado de Assis ◽  
Michel Picanço Oliveira
Keyword(s):  
Infrared Spectroscopy ◽  
Functional Groups ◽  
Natural Fibers ◽  
Chemical Properties ◽  
Microscopic Analysis ◽  
Banana Fiber ◽  
Characterization Methods ◽  
Actual Application ◽  
Banana Fibers

A number of methods are available for characterization of the structural, physical, and chemical properties of natural fibers. Various methods are used for fiber identification like microscopic analysis, solubility, heating and burning technique density, staining etc. End-use property characterization methods often involve use of laboratory techniques which are adapted to simulate actual application as composite reinforcement. One of the techniques used on this kind of studies is the infrared spectroscopy. In fact, Fourier Transform Infrared (FTIR) spectroscopy is a valuable tool in the determination of functional groups actively interacting within a fiber. In this work, the banana fiber was evaluated by FTIR to reveal these functional groups and compare to similar works on other different types of banana fibers.

scholarly journals Comparative Study of Mechanical Properties and Thermal Stability on Banyan/Ramie Fiber-Reinforced Hybrid Polymer Composite

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
T. Raja ◽  
S. Ravi ◽  
Alagar Karthick ◽  
Asif Afzal ◽  
B. Saleh ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Impact Strength ◽  
Hybrid Composite ◽  
Composite Laminates ◽  
Hybrid Composites ◽  
Natural Fibers ◽  
Synthetic Fiber ◽  
Ramie Fiber ◽  
Fabric Composite

The usage of natural fibers has increased recently. They are used to replace synthetic fiber products in aircraft and automobile industries. In this study, natural fibers of bidirectional banyan mat and ramie fabrics are used for reinforcement, and the matrix is an epoxy resin to fabricate composite laminates by traditional hand layup technique at atmospheric temperature mode. Five different sequences of reinforcements are as follows to quantify the effect of thermal stability and mechanical behavior of silane-treated and untreated hybrid composites. The results revealed that silane-treated fabric composite laminates were given enhanced mechanical properties of 7% tensile, 11% flexural, and 9% impact strength compared with untreated fabric composite, and at the same time when the increasing of ramie fabric was given the positive influence of 41% improved tensile strength of 40.7 MPa, 49% improved in flexural strength of 38.9 MPa and negative influence in 57% lower impact strength in sample E and positive value in sample A 21.12 J impact energy absorbed in the hybrid composite. Thermogravimetric analysis (TGA) revealed the thermal stability of the hybrid composite. In sample A, the thermal stability is more than in other samples, and 410°C is required to reduce the mass loss of 25%. The working mass condition of the hybrid composite is up to 3.25 g after it moves to degrade.

Valorization of Vegetal Fibers in Anti-Fissuration Screed Mortar Formulation

2022 ◽  
Author(s):  
Sergio Pons Ribera ◽  
Rabah Hamzaoui ◽  
Johan Colin ◽  
Benitha Vasseur ◽  
Laetitia Bessette ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Strength ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Point Of View ◽  
Synthetic Fiber ◽  
Sem Images ◽  
Hemp Fibers ◽  
Synthetic Fibers ◽  
Rigid Fibers

This work, which is part of the FIBRABETON project, aims to anti-fissuration screed formulations proposition based on natural fibers and comparing these formulations to a synthetic fiber-screed formulation. Different natural fiber (hemp, flax, miscanthus and bamboo) with contents rangingfrom 0.4% to 0.8% were tested. The spread (slump), the shrinkage and mechanical strength (flexural and compressive) studies were carried out. SEM images of natural fibers and natural fibers screed formulation were analyzed. Overall, it is found that all natural fibers screed formulations tested, have shown better behaviour than the synthetic fibers screed formulation in point of view workability, shrinkage and mechanical properties. The lowest shrinkage value is found in the case of the H5 (5 mm long hemp fibers) screed formulation. Generally speaking, the mechanical strength values (flexural and compressive) are more or less similar between natural soft fibers (hemp and flax) and rigid fibers (miscanthus and bamboo). Taking in account slump, shrinkage and mechanical behavior, the proposed good compromise in this work is the H5 screed formulation.

Fabrication and Mechanical Properties of Banana Fiber Reinforced Biocomposite

2014 ◽  
Vol 1 (1) ◽  
Author(s):  
Surya Pratap Goutam ◽  
Rajkamal Shastri ◽  
J P Yadav ◽  
M K Gupta ◽  
Anil Kumar Yadav ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Renewable Resources ◽  
Natural Fiber ◽  
Natural Fibers ◽  
Environmental Issues ◽  
Fiber Reinforced ◽  
Banana Fiber ◽  
Environment Friendly ◽  
Material Sources ◽  
Important Indication

<p>Usual polymer composites are non-biodegradable and pollute the environment. Using natural fibers with polymers<br />based on renewable resources will allow many environmental issues to be solved. Therefore, world is as of now focusing<br />on alternate material sources that are environment friendly and biodegradable in nature. Owing to increasing natural<br />concerns, bio composite produced out of natural fiber and polymeric resin, is one of the late advancements in the<br />scientific business. This paper is focused on fabrication and mechanical behaviour of natural fiber-reinforced<br />biocomposite R P E B . It is shown that a property of the fibers also gives important indication regarding their 15 15 40 30<br />subsequent behaviour as reinforcement in composites.</p>

Sign in / Sign up

Export Citation Format

Share Document