Effects of ultrasonic wave pretreatment on the fibrillation of cellulose fiber

TAPPI Journal ◽  
2014 ◽  
Vol 13 (4) ◽  
pp. 37-43 ◽  
Author(s):  
YONGJIAN XU ◽  
YING YAN ◽  
XIAOPENG YUE ◽  
ZHENFENG ZHU ◽  
DINGJUN ZHANG ◽  
...  

Pinus massoniana Lamb. was used as the raw cellulose fiber material to investigate effects of ultrasonic wave pretreatment and PFI pretreatment on fiber bonding and absorbability. Influences of ultrasonic wave pretreatment on fiber crystalline structure and hydrogen bonds were also analyzed by wide-angle X-ray diffraction and Fourier transform infrared (FTIR) spectroscopy. The absorption and internal bond strength of fiber pretreated by ultrasonic waves increased by 23.49% and 4.07%, respectively, in comparison with those of virgin fiber, which would result in the improvement of weak bonding and absorbability. Instead, when fiber was pretreated by PFI, absorption decreased in comparison with virgin fiber and internal bond strength increased as much as 1.33 times than that of virgin fiber. The analysis of wide-angle X-ray diffraction curves and FTIR spectroscopy curves revealed that the crystallinity of fiber decreased by 20.59% in comparison with that of virgin fiber when treated by ultrasonic waves. Moreover, the effect of ultrasonic wave pretreatment on intramolecular hydrogen bonds was rather stronger than that of intermolecular hydrogen bonds. Therefore, the optimal swelling ability of fiber would be obtained.

2007 ◽  
Vol 168 (1) ◽  
pp. 37-41 ◽  
Author(s):  
Valerio Causin ◽  
Carla Marega ◽  
Pietro Carresi ◽  
Sergio Schiavone ◽  
Antonio Marigo

Polymer ◽  
2004 ◽  
Vol 45 (18) ◽  
pp. 6341-6348 ◽  
Author(s):  
S. Stoeva ◽  
A. Popov ◽  
R. Rodriguez

Polymer ◽  
2001 ◽  
Vol 42 (21) ◽  
pp. 8965-8973 ◽  
Author(s):  
Zhi-Gang Wang ◽  
Xuehui Wang ◽  
Benjamin S. Hsiao ◽  
Saša Andjelić ◽  
Dennis Jamiolkowski ◽  
...  

Carbon ◽  
2015 ◽  
Vol 87 ◽  
pp. 246-256 ◽  
Author(s):  
Périne Landois ◽  
Mathieu Pinault ◽  
Stéphan Rouzière ◽  
Dominique Porterat ◽  
Cristian Mocuta ◽  
...  

IUCrJ ◽  
2014 ◽  
Vol 1 (2) ◽  
pp. 136-150 ◽  
Author(s):  
Palash Sanphui ◽  
Geetha Bolla ◽  
Ashwini Nangia ◽  
Vladimir Chernyshev

Acemetacin (ACM) is a non-steroidal anti-inflammatory drug (NSAID), which causes reduced gastric damage compared with indomethacin. However, acemetacin has a tendency to form a less soluble hydrate in the aqueous medium. We noted difficulties in the preparation of cocrystals and salts of acemetacin by mechanochemical methods, because this drug tends to form a hydrate during any kind of solution-based processing. With the objective to discover a solid form of acemetacin that is stable in the aqueous medium, binary adducts were prepared by the melt method to avoid hydration. The coformers/salt formers reported are pyridine carboxamides [nicotinamide (NAM), isonicotinamide (INA), and picolinamide (PAM)], caprolactam (CPR),p-aminobenzoic acid (PABA), and piperazine (PPZ). The structures of an ACM–INA cocrystal and a binary adduct ACM–PABA were solved using single-crystal X-ray diffraction. Other ACM cocrystals, ACM–PAM and ACM–CPR, and the piperazine salt ACM–PPZ were solved from high-resolution powder X-ray diffraction data. The ACM–INA cocrystal is sustained by the acid...pyridine heterosynthon and N—H...O catemer hydrogen bonds involving the amide group. The acid...amide heterosynthon is present in the ACM–PAM cocrystal, while ACM–CPR contains carboxamide dimers of caprolactam along with acid–carbonyl (ACM) hydrogen bonds. The cocrystals ACM–INA, ACM–PAM and ACM–CPR are three-dimensional isostructural. The carboxyl...carboxyl synthon in ACM–PABA posed difficulty in assigning the position of the H atom, which may indicate proton disorder. In terms of stability, the salts were found to be relatively stable in pH 7 buffer medium over 24 h, but the cocrystals dissociated to give ACM hydrate during the same time period. The ACM–PPZ salt and ACM–nicotinamide cocrystal dissolve five times faster than the stable hydrate form, whereas the ACM–PABA adduct has 2.5 times faster dissolution rate. The pharmaceutically acceptable piperazine salt of acemetacin exhibits superior stability, faster dissolution rate and is able to overcome the hydration tendency of the reference drug.


Author(s):  
Flavien A. A. Toze ◽  
Vladimir P. Zaytsev ◽  
Lala V. Chervyakova ◽  
Elisaveta A. Kvyatkovskaya ◽  
Pavel V. Dorovatovskii ◽  
...  

The chiral title compounds, C21H18N2O2, (I), and C21H18N2OS, (II) – products of the three-component reaction between benzylamine, isatoic anhydride and furyl- or thienyl-acrolein – are isostructural and form isomorphous racemic crystals. The tetrahydropyrimidine ring in (I) and (II) adopts a sofa conformation. The amino N atom has a trigonal–pyramidal geometry [sum of the bond angles is 347.0° for both (I) and (II)], whereas the amido N atom is flat [sum of the bond angles is 359.3° for both (I) and (II)]. The furyl- and thienylethenyl substituents in (I) and (II) are planar and the conformation about the bridging C=C bond isE. These bulky fragments occupy the axial position at the quaternary C atom of the tetrahydropyrimidine ring, apparently, due to steric reasons. In the crystals, molecules of (I) and (II) form hydrogen-bonded helicoidal chains propagating along [010] by strong intermolecular N—H...O hydrogen bonds.


2011 ◽  
Vol 34 (5-6) ◽  
pp. 127-130 ◽  
Author(s):  
Yaya Sow ◽  
Libasse Diop ◽  
Kieran C. Molloy ◽  
Gabrielle Kociok-Köhn

Abstract The title compounds [R2NH2][C2O4SnMe3](R=i-Bu, Cy), in which tin atoms adopt a distorted trigonal bipyramidal configuration, have been prepared and submitted to an X-ray diffraction study. These compounds have been obtained from the reaction of (Cy2NH2)2C2O4·H2O or (i-Bu2NH2)2C2O4 with SnMe3Cl. In both [R2NH2][C2O4SnMe3] compounds, the trans complex has an almost regular trigonal bipyramidal geometry around the tin atom. The SnMe3 residues are connected as a chain with bridging oxalate anions in a trans-SnC3O2 framework, the oxygen atoms being in axial positions. The cations connect linear adjacent chains through NH…O hydrogen bonds giving layered structures.


Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1572
Author(s):  
Baku Nagendra ◽  
Paola Rizzo ◽  
Christophe Daniel ◽  
Lucia Baldino ◽  
Gaetano Guerra

Poly(ʟ-lactide) (PLLA) films, even of high thickness, exhibiting co-crystalline and crystalline α phases with their chain axes preferentially perpendicular to the film plane (c⊥ orientation) have been obtained. This c⊥ orientation, unprecedented for PLLA films, can be achieved by the crystallization of amorphous films as induced by low-temperature sorption of molecules being suitable as guests of PLLA co-crystalline forms, such as N,N-dimethylformamide, cyclopentanone or 1,3-dioxolane. This kind of orientation is shown and quantified by two-dimensional wide-angle X-ray diffraction (2D-WAXD) patterns, as taken with the X-ray beam parallel to the film plane (EDGE patterns), which present all the hk0 arcs centered on the meridian. PLLA α-form films, as obtained by low-temperature guest-induced crystallization, also exhibit high transparency, being not far from those of the starting amorphous films.


Sign in / Sign up

Export Citation Format

Share Document