scholarly journals Penerapan Internet of Things (IoT) Kontrol Lampu Menggunakan NodeMCU ESP8266 dan Smartphone

2021 ◽  
Vol 10 (2) ◽  
pp. 136-143
Author(s):  
Yulisman Yulisman ◽  
Ikhwanul Ikhsan ◽  
Anita Febriani ◽  
Rika Melyanti
Keyword(s):  
Control System ◽  
Internet Of Things ◽  
Open Source ◽  
Electronic Devices ◽  
Electrical Energy ◽  
Wireless Transmission ◽  
Light Control ◽  
Light Bulb ◽  
C Language ◽  
Remote Controller

Abstract The development of smartphones is so rapid, so that many smartphone functions can be used to help humans, one of the functions of smartphones is to control electronic devices with bluetooth or wireless transmission, with the aim that electronic devices can be integrated in the application of IoT (Internet of Things). Workspace for employees of the Regional Personnel Agency (BKD) of Riau Province in turning off and turning on the lights using a manual switch. The problem is when the employee finishes work and the office room is locked and the room lights forget to be turned off by the employee, and the office security has difficulty turning off the lights because the room is locked, if the lights are left on, there will be a waste of electrical energy and damage to the light bulb because it is on continuously. This study aims to build a system that can control the workspace lights at the IoT-based BKD office in Riau Province using the NodeMCU ESP8266 module as a sensor, a 5V Relay module and a Smartphone as a remote controller as well as a model for building a lamp control system using the Prototype method. The programming language used is C language and Arduino IDE which is Open Source. The results of this study are in the form of a lamp control system device with an IoT-based smartphone in the form of a prototype and based on these results it can be concluded that the lamp control system device with an IoT-based smartphone can work well, making it easier for officers to control the lights, and can reduce the risk of lamp damage and wasteful. the electrical energy caused by the lamp burning continuously. Keywords: Android, Internet of Things (IoT), Light Control, NodeMCU ESP8266, Smartphone   Abstrak Perkembangan telepon cerdas (Smartphone) begitu pesat, sehingga banyak fungsi smartphone yang bisa dimanfaatkan untuk membantu manusia, salah satu fungsi smartphone untuk mengendalikan perangkat elektronik dengan transmisi bluetooth atau wireless, dengan tujuan agar perangkat elektronik dapat terintegrasi dalam penerapan IoT (Internet of Things). Ruangan kerja pada pegawai Badan Kepegawaian Daerah (BKD) Provinsi Riau dalam mematikan dan menyalakan lampu menggunakan saklar manual. Permasalahannya ketika pegawai selesai bekerja dan ruangan kantor sudah terkunci dan lampu ruangan lupa dimatikan oleh pegawai, dan keamanan kantor kesulitan untuk mematikan lampu karena ruangan terkunci, jika dibiarkan lampu terus menyala sehingga akan terjadinya pemborosan energi listrik dan kerusakan pada bola lampu karena menyala terus menerus. Penelitian ini bertujuan membangun sistem yang dapat mengendalikan lampu ruangan kerja dikantor BKD Provinsi Riau berbasis IoT menggunakan modul NodeMCU ESP8266 sebagai sensor, modul Relay 5V dan Smartphone sebagai remot kontrol serta untuk model membangun sistem kontrol lampu menggunakan metode Prototype. Bahasa pemrograman yang digunakan Bahasa C dan Arduino IDE yang bersifat Open Source. Hasil penelitian ini berupa perangkat sistem pengontrol lampu dengan smartphone berbasis IoT dalam bentuk prototipe dan berdasarkan hasil tersebut dapat diperoleh kesimpulan perangkat sistem pengontrol lampu dengan smartphone berbasis IoT  dapat bekerja dengan baik, sehingga memudahkan petugas dalam mengotrol lampu, dan dapat mengurangi resiko kerusakan lampu dan boros energi listrik yang diakibatkan lampu menyala terus menerus. Kata Kunci : Android, Internet of Things (IoT), Kontrol Lampu, NodeMCU ESP8266, Smartphone

Build Smart Home Controls Using Wemos Microcontroller-Based Telegram App

CCIT Journal ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 1-12
Author(s):  
Freddy Artadima Silaban ◽  
Rendy Elmianto ◽  
Lukman Madriavin Silalahi
Keyword(s):  
Control System ◽  
Internet Of Things ◽  
Response Time ◽  
Open Source ◽  
Smart Home ◽  
Electronic Devices ◽  
Technological Developments ◽  
Arduino Uno ◽  
And Control

Current technological developments are very fast and progressing. One of the developments that occurs in the IoT (Internet Of Things) system. Many IOT (Internet Of Things) systems already have open source and can be suitable as needed, therefore by utilizing technological advancements, lamp controllers and house doors are made using Telegram applications. This control system can carry out home communications and control home electronic devices such as lights and house doors remotely using the Wemos and Arduino UNO microcontrollers. The Telegram application is used to send commands connected to the io.adafruit.com server. This system can provide notifications sent to the Telegram application when the house door is opened. The conclusion of the results obtained when the tool needed to communicate with the server is 12.94 seconds. For the voltage of 4 lights ± 220 V AC and for servo voltage ± 4.8 V DC. For the response time of the tool to the server ± 3 seconds, while the response time of the tool to Nextion LCD is ± 1 second

scholarly journals Rancang Bangun Sistem Kontrol Lampu Listrik Menggunakan Remote Berbasis Mikrokontroler ATMega 8535

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Muksin Hi Abdullah
Keyword(s):  
Control System ◽  
Remote Control ◽  
Control Systems ◽  
Programming Language ◽  
Research Method ◽  
System Control ◽  
Light Control ◽  
C Language ◽  
Turn On

Abstrak: Tujuan penelitian ini  adalah merancang sistem kontrol lampu menggunakan remote untuk menyalakan dan memadamkan lampu, Penelitian ini dilakukan pada ruangan Direktur Akademi Ilmu Komputer (AIKOM) Ternate, Metode Penelitian yang digunakan adalah metode Pustaka, Observasi, serta Rancangan Alat, Bahasa Pemrograman yang digunakan adalah Bahasa C, Perancangan alat terdiri dari pembuatan alat pengontol lampu dan komponen yang menunjang kerja sistem seperti Sistem pengontrol, Mikrokontroler ATMega 8535, relay, remote, dan lampu. Sistem control lampu yang dioperasikan dengan menggunakan remote control untuk menggerakkan relay sehingga lampu yang terhubung akan menyala dan padam. Remote control tersebut terhubung dengan receiver yang ada pada mikrokontroler, dengan menekan tombol B, maka lampu menyala/hidup dan ketika menekan tombol A, dan lampu padam melalui sistem control, dengan adanya sistem ini mempermudah sesorang untuk menyalakan dan memadamkan lampu yang lebih praktis tanpa harus mendekati stop kontak pada Ruangan Direktur Akademi Ilmu Komputer (AIKOM) Ternate.Kata kunci: Rancang, Sistem Kontrol Listrik, Mikrokontroler ATMega 8535Abstract: The purpose of this research is to design control systems using the remote to turn on the lights and extinguishes the lights, This research was conducted in room Director of Akademi Ilmu Komputer (AIKOM) Ternate, The research method used is the method of Library, observation, as well as the draft tool, the programming language used is C language, The design of the tool consists of the manufacture of tool control system,  lights and components that support the work of the system such as System controllers, Mikrokontroler ATMega 8535, relay, remote, and lights, Light control system which is operated by using the remote control to move the relay so that the connected lamp will turn on and off, A remote control is connected with the receiver on the microcontroller, by pressing the button B then the lights on/living and when pressing the button A and the light turns off through the system control. the existence of this system make it easier someone to ignite and extinguish the lamp more practical without having to approach the stop contact at Room Director Akademi Ilmu Komputer (AIKOM) TernateKeywords: Design, Electric Controll System, Microcontroller ATMega 8535

scholarly journals Low Cost Automatic Street Light Control System With and Without Relay

2019 ◽  
Vol 8 (3) ◽  
pp. 3790-3794
Keyword(s):  
Control System ◽  
Power Plants ◽  
Low Cost ◽  
Modern Society ◽  
Electrical Energy ◽  
Modern Technology ◽  
Light Control ◽  
Utility Companies ◽  
Set Up ◽  
The Cost

modern society entirely depends on electricity for daily life. It has become the key component for modern technology, without electricity most of the equipments which we are using daily will not work at all. Internet is our gateway for knowledge and we also depend on it a lot to get the things which are surrounding us very easily. Under this situation we are not using proper electrical energy in case of street lights. Street lights are perfect solution for night base loads at most of the utility companies during 1930’s were seeking for night timed base loads especially coal based power plants. In India approximately 40 million street lights are there which will generates a total demand of 4000 MW. The cost required to satisfy this demand will also very high. In most of the places maintenance of street lights is very poor. Even though several technologies have used to automatic control of street light but they may turn into several failures because of high cost, improper maintenance, environmental effects on the components or some other major issues. In this paper a low cost maintenance free automatic street light control system is proposed which can be used with relay al well as without relay by using basic electronics components. A small experimental set up has done in laboratory and it can be concluded that the street light automatically turns on and off depends on the darkness of the environment. It can be implemented anywhere irrespective of environmental conditions without any maintenance

scholarly journals Fish Feeder And Monitoring Temperature Control System Menggunakan Metode Protoype pada Akuarium Ikan Hias Koki Berbasis Internet Of Things

2021 ◽  
Vol 20 (1) ◽  
pp. 22-27
Author(s):  
AB Susanto ◽  
Sindu Arianto ◽  
Joko Purnomo ◽  
Sulistiyasni .
Keyword(s):  
Control System ◽  
Internet Of Things ◽  
Temperature Control ◽  
Early Warning ◽  
Electronic Devices ◽  
The State ◽  
Temperature Control System ◽  
The Internet ◽  
Good For ◽  
Monitoring Temperature

IoT in this research serves to integrate and connect all electronic devices using the internet network. This system will make it easier for users to feed fish from a distance and get information about the state of water.Arduino utilizes the ATMega microprocessor to control a variety of sensors. For example, to monitor the condition of a room and make it possible to "feel" the conditions in the room even though it is monitored remotely.The method used in this research is Prototype because it is very good for solving misunderstanding problems between users and analysts. Researchers designed and implemented an IoT-based temperature control system for remote feeding and monitoring in aquarium ornamental chefs. This system uses an Android-based smartphone connected to the NodeMcu Microcontroller to send the latest temperature information and provide an early warning if the temperature in the aquarium.

PENGGUNAAN INTERNET OF THINGS DALAM PEMASARAN PRODUK PERTANIAN

2018 ◽  
Vol 3 (2) ◽  
pp. 74
Author(s):  
Helina Apriyani ◽  
Sismadi Sismadi ◽  
Sefrika Sefrika
Keyword(s):  
Cloud Computing ◽  
Internet Of Things ◽  
Data Storage ◽  
Electronic Devices ◽  
Agricultural Products ◽  
Main Concept ◽  
Farmers Market ◽  
Incremental Method ◽  
Sales Process ◽  
Internet Connections

AbstrakInternet of things (IoT) adalah sebuah konsep yang menghubungkan komputer dan perangkat elektronik melalui internet dan dapat dikendalikan dari jarak jauh. Konsep terpenting dalam Internet of things (Iot) adalah modul sistem informasi, koneksi internet dan penyimpanan datanya dalam cloud computing. Konsep ini memiliki manfaat besar dalam perkembangan usaha dan kelangsungan bisnis perusahaan dimana hampir semua bidang menggunakan IoT untuk dapat bersaing di pasaran. Indonesia merupakan sebuah negara yang dianugerahi kekayaan alam yang melimpah ruah. Salah satu komoditi unggulan adalah produk pertanian. Penelitian ini bertujuan untuk membantu para petani dalam memasarkan produknya melalui e-commerce dengan menggunakan konsep Internet of things IoT. Metode penelitian dengan menggunakan metode incremental.  Incremental digunakan untuk mendesai produk, kemudian  diimplementasikan, dan diuji secara bertahap (setiap modul akan ditambahkan bertahap) hingga produk selesai. Hasil penelitian ini digunakan untuk membantu petani di Kabupaten Bogor untuk mendistribusikan penjualannya secara luas, meningkatkan revenue dan memutus rantai panjang proses penjualan. Kata kunci— sistem penjualan, incremental, Internet of Things (IoT), produk pertanian, Kabupaten Bogor Abstract Internet of things (IoT) is a concept that connects computers and electronic devices via the internet and can be controlled remotely. The main concept in Internet of things (IoT) is information systems, internet connections and data storage in cloud computing. This concept has great benefits in the efforts and efforts used to use IoT to be able to compete in the market. Indonesia is a country that is blessed with abundant natural resources. One of the leading commodities is agricultural products. This study aims to help farmers market their products through e-commerce using the IoT Internet of things concept. Research method using incremental method. Incremental to design the product, then implemented, and gradually delay (each module will be added gradually) until the product is finished. The results of this study are to help farmers in Bogor Regency to distribute sales widely, increase revenue and break the sales process. Keywords—sales system, incremental, Internet of Things (IoT), agricultural products, Kabupaten Bogor

Temperature Control System for Transformer Three-Phase 50 Hz 2500 kVA

2017 ◽  
Vol 3 (2) ◽  
pp. 88
Author(s):  
Suci Rahmatia ◽  
Marsah Zaysi Makhudzia
Keyword(s):  
Optimal Control ◽  
Control System ◽  
Heat Loss ◽  
Temperature Control ◽  
Electrical Energy ◽  
Temperature Control System ◽  
Iron Core ◽  
Electrical Device ◽  
Optimal Control System ◽  
Three Phase

<p><em>Abstrak <strong>- </strong></em><strong>Transformator adalah peralatan listrik yang sangat vital dalam proses pembangkitan maupun transmisi energi listrik karena transformator dapat menaikkan atau menurunkan tegangan. Pada proses menaikkan dan menurunkan tegangan biasanya sering timbul panas akibat rugi – rugi tembaga pada inti besi dan kumparannya sehingga pada kondisi overload akan menimbulkan pemanasan yang berlebih dan dapat mempengaruhi kinerja transformator. Oleh karena itu dibuat sistem kontrol temperatur pada transformer yang dapat mengontrol temperatur di dalam transformator saat bekerja pada kondisi overload, sehigga transformatornya tidak terbakar. Dial thermometer digunakan sebagai alat yang mengontrol temperatur transformator pada sistem kontrol temperatur. Agar mendapatkan sistem kontrol yang optimal, maka setting temperatur pada dial thermometer di sesuaikan dengan temperatur maksimal tranformator dapat bekerja. Sehingga pada saat temperatur tertentu dial thermometer dapat memberikan sinyal untuk membunyikan alarm dan mengaktifkan kontrol kipas sehingga kipas dapat bekerja menurunkan temperatur transformator.<em></em></strong></p><p><strong><em> </em></strong></p><p><strong><em>Kata kunci - </em></strong><em>transformator, rugi – rugi tembaga, temperatur, sistem kontrol, dial thermometer<strong>.</strong></em></p><p><strong><em> </em></strong></p><p><em>Abstract <strong>- </strong></em><strong>A transformer is an electrical device that is vital in the generation and transmission of electrical energy because the transformer can raise (stepping up) or lower (stepping down) the voltage. In the process of raising and lowering the voltage is usually often caused heat loss of copper in iron core and coil so that the overload condition will cause excessive warming and can affect the performance of the transformer. Therefore, a temperature control system on the transformer can control the temperature inside the transformer while working under overload conditions, so the transformer is not burned. Dial thermometer is used as a device that controls the temperature of the transformer in the temperature control system. In order to obtain an optimal control system, the temperature setting on the dial thermometer adjusted to the maximum transformer temperature can work. So that when a certain temperature dial thermometer can provide a signal to sound the alarm and activate the fan control so that the fan can work down the transformer temperature.</strong></p><p><strong> </strong></p><p><strong><em>Keywords -  </em></strong><em>transformator, loss of copper, themperature, control system, dial thermometer<strong></strong></em></p>

scholarly journals Internet of Things Access Control System Based on Hyperledger

2021 ◽  
Vol 1748 ◽  
pp. 042031
Author(s):  
Zheming Yang ◽  
Di Shao ◽  
Liangyong Qu ◽  
Mei Zhang
Keyword(s):  
Control System ◽  
Internet Of Things ◽  
Access Control ◽  
Access Control System

IntelliHome: An internet of things‐based system for electrical energy saving in smart home environment

2019 ◽  
Vol 36 (1) ◽  
pp. 203-224 ◽  
Author(s):  
Mario A. Paredes‐Valverde ◽  
Giner Alor‐Hernández ◽  
Jorge L. García‐Alcaráz ◽  
María del Pilar Salas‐Zárate ◽  
Luis O. Colombo‐Mendoza ◽  
...  
Keyword(s):  
Internet Of Things ◽  
Energy Saving ◽  
Home Environment ◽  
Smart Home ◽  
Electrical Energy ◽  
Smart Home Environment
Sign in / Sign up

Export Citation Format

Share Document