scholarly journals Rancang Bangun Sistem Kontrol Lampu Listrik Menggunakan Remote Berbasis Mikrokontroler ATMega 8535

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Muksin Hi Abdullah
Keyword(s):  
Control System ◽  
Remote Control ◽  
Control Systems ◽  
Programming Language ◽  
Research Method ◽  
System Control ◽  
Light Control ◽  
C Language ◽  
Turn On

Abstrak: Tujuan penelitian ini  adalah merancang sistem kontrol lampu menggunakan remote untuk menyalakan dan memadamkan lampu, Penelitian ini dilakukan pada ruangan Direktur Akademi Ilmu Komputer (AIKOM) Ternate, Metode Penelitian yang digunakan adalah metode Pustaka, Observasi, serta Rancangan Alat, Bahasa Pemrograman yang digunakan adalah Bahasa C, Perancangan alat terdiri dari pembuatan alat pengontol lampu dan komponen yang menunjang kerja sistem seperti Sistem pengontrol, Mikrokontroler ATMega 8535, relay, remote, dan lampu. Sistem control lampu yang dioperasikan dengan menggunakan remote control untuk menggerakkan relay sehingga lampu yang terhubung akan menyala dan padam. Remote control tersebut terhubung dengan receiver yang ada pada mikrokontroler, dengan menekan tombol B, maka lampu menyala/hidup dan ketika menekan tombol A, dan lampu padam melalui sistem control, dengan adanya sistem ini mempermudah sesorang untuk menyalakan dan memadamkan lampu yang lebih praktis tanpa harus mendekati stop kontak pada Ruangan Direktur Akademi Ilmu Komputer (AIKOM) Ternate.Kata kunci: Rancang, Sistem Kontrol Listrik, Mikrokontroler ATMega 8535Abstract: The purpose of this research is to design control systems using the remote to turn on the lights and extinguishes the lights, This research was conducted in room Director of Akademi Ilmu Komputer (AIKOM) Ternate, The research method used is the method of Library, observation, as well as the draft tool, the programming language used is C language, The design of the tool consists of the manufacture of tool control system,  lights and components that support the work of the system such as System controllers, Mikrokontroler ATMega 8535, relay, remote, and lights, Light control system which is operated by using the remote control to move the relay so that the connected lamp will turn on and off, A remote control is connected with the receiver on the microcontroller, by pressing the button B then the lights on/living and when pressing the button A and the light turns off through the system control. the existence of this system make it easier someone to ignite and extinguish the lamp more practical without having to approach the stop contact at Room Director Akademi Ilmu Komputer (AIKOM) TernateKeywords: Design, Electric Controll System, Microcontroller ATMega 8535

scholarly journals PEMBUATAN PROTOTYPE SISTEM PENGENDALI LAMPU RUMAH DENGAN PERANGKAT MOBILE ANDROID

2015 ◽  
Vol 14 (2) ◽  
pp. 22
Author(s):  
I G. A. K. Diafari Djuni H ◽  
I G A P Raka Agung ◽  
N. Pramaita ◽  
Made Sugiri
Keyword(s):  
Control System ◽  
Remote Control ◽  
Human Behavior ◽  
Mobile Device ◽  
Wireless Lan ◽  
Prototype System ◽  
Light Control ◽  
Lighting Control ◽  
Arduino Microcontroller ◽  
Control Application

AndroidisaLinux-basedoperatingsystemandis open source that can be developed independently so that more applications can be made. This application can also be integrated with other devices to control or control system is desirable. Media remote control or wireless (LAN) is a growing need for human behavior that want to move faster and farther range of location of residence. This research will be designed and built a prototype system controlling lights at home using Arduino microcontroller connected to mobile devices based on Android. Light control is done on a mobile device that is connected to the control system via WiFi Router lights. Wifi Router has sufficient coverage so that the owners of these devices can move more comfortably without having to control the lights via a switch on the wall of the house. The house lights controller circuit can adjust the lights ON and OFF as well as the Bright and Dim the lamp 1 and lamp 2. Lighting Control Application on mobile android devices already can set the lights on the control circuit.

scholarly journals Remote Control Switching System Based on Wireless Technology

2020 ◽  
Vol 3 (2) ◽  
pp. 52
Author(s):  
Luh Kadek Pracanthi Dyah Sekartaji ◽  
Nyoman Pramaita ◽  
Nyoman Gunantara
Keyword(s):  
Control System ◽  
Remote Control ◽  
The Elderly ◽  
Design System ◽  
Switching System ◽  
Turn On ◽  
Remote Control System ◽  
Transmission Distance ◽  
Receiver System ◽  
To Receive

Remote control switching system is used to control the switching of the electrical and electronic appliances from a distance. This remote serves to facilitate the use of the switching of electrical, and electronic appliances for people with disabilities, and the elderly. This paper develops a remote control system using radio frequency technology utilizing the principle of wireless system. The remote control system is constructed by RF433 module as the transmitter, and receiver, IC HT12E module as the encoder, and IC HT12D module as the decoder. To achieve the aim of this research: a transmitter system is designed to transmit a signal when the keypad is pressed; a receiver system is designed to receive the signal from the transmitter system, then the system will turn on and turn off the loads. Based on experimental results, this design system is capable to turn on and turn off the loads with a transmission distance up to 18 meters, without obstruction, and 15 meters with obstruction.  

scholarly journals Mobile Platform for Car Service

2021 ◽  
Vol 24 (1) ◽  
pp. 64
Author(s):  
M. N. Abdelhamed ◽  
A. V. Shchenyatsky
Keyword(s):  
Control System ◽  
Remote Control ◽  
Control Systems ◽  
Power Supply ◽  
Carrying Capacity ◽  
Mobile Application ◽  
3D Models ◽  
Mobile Platform ◽  
Ground Clearance ◽  
Design Solutions

The analysis of the use of drives of mobile and transport robots is given. Various options for design solutions are considered, including the main selected drive of a mobile platform with four Omni-wheels, ensuring maximum mobility and maneuverability. Masses and ground clearance of vehicles of various classes are estimated to determine the overall dimensions of the mobile platform in terms of height and carrying capacity. It has been established that the necessary elements of a mobile platform are universal mounting plates and trailed equipment.The control systems of two variants have been developed. The first is automatic, for an autonomous mobile platform, and the second is for remote control. Control systems include 3 microcontrollers, 5 drivers, 6 motors, 4 sensors. The position of the mobile platform can be controlled by the operator remotely using a mobile application. Power supply of the MP is carried out from its own battery, from the car network or an external network. An algorithm for the operation of the control system for different versions is proposed. 3D models of the mobile platform and suspension unit models have been developed. Calculations of the lifting mechanism of the MP are given. The layout of the nodes of the mobile platform is presented.

scholarly journals EFEKTIVITAS SISTEM PENGENDALIAN INTERN PADA KINERJA INSTANSI PEMERINTAH DI DINAS PENDAPATAN DAERAH KABUPATEN MINAHASA SELATAN

2018 ◽  
Vol 13 (03) ◽  
Author(s):  
Victor Youbert Stenly Suak ◽  
Jenny Morasa ◽  
Sintje Rondonuwu
Keyword(s):  
Control System ◽  
Control Systems ◽  
Internal Control ◽  
Research Method ◽  
Government Agencies ◽  
Government Organization ◽  
Management Agency ◽  
Internal Control System ◽  
Government Institution ◽  
Descriptive Qualitative

In a government organization requires the existence of an internal control system because with the existence of  an internal control system, activities carried out by government agencies are more directed and avoid fraud and safe guard the company’s assets from irresponsible parties. The object in this study is the Regional Revenue Service of South Minahasa Regency. The purpose of this study is to analyze the effectiveness of the internal control system on the performance of government agencies in the Regional Revenue Service of South Minahasa Regency. The research method used is descriptive qualitative. Results of research internal control systems applied Government Institution in Regional tax and Retribution Management Agency of South Minahasa Regency are less effective. The achievement of Revenues and realization of Regions in 2016 is less effective because the regional Tax and Retribution Management Agency was only formed in early 2016.Keywords: Effectiveness, Internal Control

scholarly journals PENGENDALI BEBAN LISTRIK MENGGUNAKAN HAND PHONE MELALUI MISSCALL

2012 ◽  
Vol 4 (2) ◽  
pp. 15-24
Author(s):  
Ahmad Bahri Joni Malyan ◽  
Surfa Yondri
Keyword(s):  
Control System ◽  
Control Systems ◽  
Electric Load ◽  
Turn On ◽  
Electrical Devices ◽  
Electric Loads ◽  
At Home

An Electric Load Controller is a tool to make easier an implementation of repeated activities such as to turn on and turn off the electric load by using a hand phone as a controller. The controller aims to take into account problems related to control systems and to design a control system that can be implemented in the house hold in case of turning on and off electric loads. A user may turn on and off electric loads from a remote place easily. The design of control, microcontroller, relay, load and rectifier are applied on this research. Furthermore, a hand phone is used for the missed call feature and IC AT89S52 is used on the microcontroller design through BASCOM 8051 programming so as to make missed call feature can be transmitted to a destination number without manually turning off and on electrical devices at home.

Optimalisasi Lampu Lalu Lintas dengan Fuzzy Logic

2013 ◽  
Vol 5 (2) ◽  
pp. 58-62 ◽  
Author(s):  
Adhitya Yoga Yudanto ◽  
Marvin Apriyadi ◽  
Kevin Sanjaya
Keyword(s):  
Fuzzy Logic ◽  
Control System ◽  
Fuzzy Inference ◽  
System Control ◽  
Light Control ◽  
Traffic Light ◽  
Inference System ◽  
Traffic Lights ◽  
The Road ◽  
Traffic Light Control

The traffic lights problem is already commonly found in large cities. The traffic lights are supposed to control the flow of the road, but sometimes causes a congestion. This happens because the distribution of the time are all the same for all lines, without seeing the condition of the density of each lane. There’s one effort that can be done to overcome this problem, is to create a traffic light control system. With this system, the congestion that occurs around the traffic lights can be reduced. This system is using fuzzy logic. Fuzzy logic is one of computer science that studies about the value of truth that worth a lot. For example, a air conditioning system control subway Sendai in Japan. As for making a traffic light control system, the author using Fuzzy Inference System (FIS) that already exist in the application of MATLAB R2013a with Mamdani method. Index Terms —fuzzy logic, traffic lights, MATLAB.

Lighting controls: a field study of office workers’ reactions

2001 ◽  
Vol 33 (2) ◽  
pp. 77-94 ◽  
Author(s):  
S Escuyer ◽  
M Fontoynont
Keyword(s):  
Control System ◽  
Remote Control ◽  
Control Systems ◽  
Office Workers ◽  
Artificial Light ◽  
Lighting Control ◽  
Light Levels ◽  
Task Lighting ◽  
Illuminance Level ◽  
User Friendly

This paper reports a qualitative study of the acceptability of lighting control systems by 41 French office workers, in three sites with dimmable lighting, respectively with manual, semi-manual, and automatic control. The analysis of the results aimed to determine the characteristics of an ideal lighting control system. It appeared that the occupants found automatic continuous daylight-linked systems discreet, but they needed to be able to override them. The complexity of the remote control has led occupants to under-exploit it. Many occupants chose lower artificial light levels when daylight was bright, in order to benefit more from daylight. Automatic dimming with manual choice of illuminance level, optional task lighting, and user friendly control, may be the key elements of an ideal lighting control system.

scholarly journals COMPUTER SYSTEM FOR CONTROLLING INDOOR LIGHTING

2021 ◽  
Vol 295 (2) ◽  
pp. 40-44
Author(s):  
D. STATSENKO ◽  
◽  
B. ZLOTENKO ◽  
S. NATROSHVILI ◽  
T. KULIK ◽  
...  
Keyword(s):  
Control System ◽  
Remote Control ◽  
Programming Languages ◽  
Computer System ◽  
Control Program ◽  
System Control ◽  
Light Sources ◽  
Lighting Control ◽  
Indoor Lighting ◽  
Room Lighting

The analysis of modern tendencies related to “Smart House” technologies is carried out in this article. The questions of programming languages of microcontrollers and microprocessors are considered. Software products that are used to create mobile applications for smartphones or tablets are presented. A computer system for remote control of room lighting is considered. The design and principle of its operation are shown schematically. A prototype of a computer system that has the following functions: 1) Control, on / off, lighting systems, depending on the needs of the owner of the premises. 2) Transfer of information about the level of illumination to the user, the owner of the premises. 3) Automatic switching on / off of electric, electroluminescent light sources, which are included in the room lighting control system. Photo of the prototype is shown. The principle of operation of the system control program based on the use of a photoresistor is presented. The Arduino microcontroller receives and processes information from the photoresistor, on the basis of which it automatically sends signals to the room lighting control system. The formulas for calculating the illumination using the results of the data obtained from the photoresistor of the prototype are given. The processed information, using wireless networks, goes to the interactive devices of the user, who can remotely check the value of illumination and, if necessary, control it. The visual interface of a mobile application for mobile phones and tablets using the Android operating system is presented. A computer system for controlling the lighting of premises, which is easy to use and does not require significant financial costs, is considered and analyzed. The methods of modeling, observation and research of computer systems are used in the work. The obtained results allow obtaining an effective computer system for remote control of indoor lighting.

scholarly journals Penerapan Internet of Things (IoT) Kontrol Lampu Menggunakan NodeMCU ESP8266 dan Smartphone

2021 ◽  
Vol 10 (2) ◽  
pp. 136-143
Author(s):  
Yulisman Yulisman ◽  
Ikhwanul Ikhsan ◽  
Anita Febriani ◽  
Rika Melyanti
Keyword(s):  
Control System ◽  
Internet Of Things ◽  
Open Source ◽  
Electronic Devices ◽  
Electrical Energy ◽  
Wireless Transmission ◽  
Light Control ◽  
Light Bulb ◽  
C Language ◽  
Remote Controller

Abstract The development of smartphones is so rapid, so that many smartphone functions can be used to help humans, one of the functions of smartphones is to control electronic devices with bluetooth or wireless transmission, with the aim that electronic devices can be integrated in the application of IoT (Internet of Things). Workspace for employees of the Regional Personnel Agency (BKD) of Riau Province in turning off and turning on the lights using a manual switch. The problem is when the employee finishes work and the office room is locked and the room lights forget to be turned off by the employee, and the office security has difficulty turning off the lights because the room is locked, if the lights are left on, there will be a waste of electrical energy and damage to the light bulb because it is on continuously. This study aims to build a system that can control the workspace lights at the IoT-based BKD office in Riau Province using the NodeMCU ESP8266 module as a sensor, a 5V Relay module and a Smartphone as a remote controller as well as a model for building a lamp control system using the Prototype method. The programming language used is C language and Arduino IDE which is Open Source. The results of this study are in the form of a lamp control system device with an IoT-based smartphone in the form of a prototype and based on these results it can be concluded that the lamp control system device with an IoT-based smartphone can work well, making it easier for officers to control the lights, and can reduce the risk of lamp damage and wasteful. the electrical energy caused by the lamp burning continuously. Keywords: Android, Internet of Things (IoT), Light Control, NodeMCU ESP8266, Smartphone   Abstrak Perkembangan telepon cerdas (Smartphone) begitu pesat, sehingga banyak fungsi smartphone yang bisa dimanfaatkan untuk membantu manusia, salah satu fungsi smartphone untuk mengendalikan perangkat elektronik dengan transmisi bluetooth atau wireless, dengan tujuan agar perangkat elektronik dapat terintegrasi dalam penerapan IoT (Internet of Things). Ruangan kerja pada pegawai Badan Kepegawaian Daerah (BKD) Provinsi Riau dalam mematikan dan menyalakan lampu menggunakan saklar manual. Permasalahannya ketika pegawai selesai bekerja dan ruangan kantor sudah terkunci dan lampu ruangan lupa dimatikan oleh pegawai, dan keamanan kantor kesulitan untuk mematikan lampu karena ruangan terkunci, jika dibiarkan lampu terus menyala sehingga akan terjadinya pemborosan energi listrik dan kerusakan pada bola lampu karena menyala terus menerus. Penelitian ini bertujuan membangun sistem yang dapat mengendalikan lampu ruangan kerja dikantor BKD Provinsi Riau berbasis IoT menggunakan modul NodeMCU ESP8266 sebagai sensor, modul Relay 5V dan Smartphone sebagai remot kontrol serta untuk model membangun sistem kontrol lampu menggunakan metode Prototype. Bahasa pemrograman yang digunakan Bahasa C dan Arduino IDE yang bersifat Open Source. Hasil penelitian ini berupa perangkat sistem pengontrol lampu dengan smartphone berbasis IoT dalam bentuk prototipe dan berdasarkan hasil tersebut dapat diperoleh kesimpulan perangkat sistem pengontrol lampu dengan smartphone berbasis IoT  dapat bekerja dengan baik, sehingga memudahkan petugas dalam mengotrol lampu, dan dapat mengurangi resiko kerusakan lampu dan boros energi listrik yang diakibatkan lampu menyala terus menerus. Kata Kunci : Android, Internet of Things (IoT), Kontrol Lampu, NodeMCU ESP8266, Smartphone

scholarly journals Perancangan Alat Pemberi Pakan Ikan Otomatis Menggunakan Arduino Berbasis Android (Studi Kasus : Toko Arapaima Aquarium)

KOMTEKINFO ◽  
2020 ◽  
Vol 7 (4) ◽  
pp. 270-277
Author(s):  
Hendra ◽  
Andhika
Keyword(s):  
Control System ◽  
Remote Control ◽  
Human Resources ◽  
Control Systems ◽  
Human Activity ◽  
Human Activities ◽  
Control Device ◽  
Remote Control System ◽  
Data Broker ◽  
Internet Of Thing

Feeding fish is the most important thing in raising fish, with regular feeding to fish the fish will be able to continue to breed, In general, the process of feeding still requires human resources that are still manual, so that it will be difficult and disrupt human activity itself, if the process carried out must spread the food in the aquarium when someone is not in place, Therefore, currently IOT (Internet of Thing) technology has been developed which can facilitate human activities with remote control systems. The process of feeding with a remote control system is done using android, so as to simplify and save someone's time in the process of feeding without having to be in place. The control system used is Arduino ESP8266 as a single board micro controller platform, so that the control device can function to connect the WI-FI network. The process of connecting an Arduino ESP8266 device with a smartphone is done using the broker as hosting, the broker used was MQTT (Message Queuing Telemetry Transport), MQTT is a protocol that runs on the TCP / IP stack and is designed specifically for machine to machine that does not have a specific address. MQTT broker's working system is to implement publish as data sender, subcribe as data recipient, and topic as hosting data broker.

Sign in / Sign up

Export Citation Format

Share Document