scholarly journals Designing a biocompatible ear implant of a man with help of modern information technologies

2018 ◽  
pp. 184-193
Author(s):  
Olena Savielieva ◽  
Leonid Orel ◽  
Andrey Pavlyshko ◽  
Veronika Rutska
Keyword(s):  
Information Technologies ◽  
3D Model ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
3D Scanner ◽  
Correct Form ◽  
Quality Of Medical Care ◽  
Human Ear

The article is devoted to designing a biocompatible human ear implant with the further possibility of its bioprinting. The paper considers 3D technologies used in medicine, the latest trends in the development of 3D bioprinters. The methods of modeling the human ear using the Artec Spider 3D scanner and the patient's digital image are considered. Using these methods, 3D modeling in the software package Autodesk 3ds Max and a solid 3D model of the human ear. 3D-bioprinting is an offensive step for the 3D-friend, which is widely to be visualized in medical. Through the rapid creation of high-precision products, taking into account the specifics of anatomy and pathology of the patient - improve the efficiency and quality of medical care. It will save a lot of lives and, possibly, in time, will improve the organs themselves. Getting a good three-dimensional model plays a big role in the correct form of the printed ears of the patient.

Parametric Design System of Precision Forging Gear Die

2013 ◽  
Vol 712-715 ◽  
pp. 1153-1157
Author(s):  
Zheng Ru Wang ◽  
Qing Ping Zhang ◽  
Cheng Wang ◽  
Gao Xiang Cai
Keyword(s):  
3D Model ◽  
Parametric Design ◽  
Three Dimensional ◽  
Die Design ◽  
Design System ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Precision Forging ◽  
Wide Range

Powerful function in three-dimensional design, SolidWorks now has found a wide range of applications in industrial design. The parametric design system of precision forging gear die in this paper is developed with VB language based on SolidWorks environment. It is described in detail that the establishment of important components of gear die in the three-dimensional model, the relation between parameters of the interface and model, and parameters drive mechanism. Input parameters in windows of VB interface, are automatically calculated the precise parameters of the gear part and geometric dimensions of the important components of the gear die. According to the input arameters, the three-dimensional model of the gear die’s assembly drawings is generated on SolidWorks environment. The parametric design system is able to shorten the time for constructing the 3D model of the precision forging gear die and improve the quality of the die design.

scholarly journals Application of stakeholder theory to corporate environmental disclosures

2009 ◽  
Vol 7 (1) ◽  
pp. 394-410 ◽  
Author(s):  
Pamela Kent ◽  
Christopher Chan
Keyword(s):  
Social Responsibility ◽  
Stakeholder Theory ◽  
Mission Statement ◽  
Three Dimensional ◽  
Annual Reports ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Environmental Disclosures ◽  
Significant Support

Ullmann’s (1985) three-dimensional model of social responsibility disclosure is tested to determine whether it can be operationalized to help explain the quantity and quality of environmental disclosures in Australian annual reports. The stakeholder power dimension of Ullmann’s framework is significant in explaining environmental disclosures while content of the mission statement and existence or otherwise of environmental or social responsibility committees also find strong statistically significant support in the results. Ullmanns’ stakeholder theory has previously been applied to explain social disclosures in general (Roberts, 1992) and is an important theory because it introduces a measure of strategy. The current paper demonstrates how this theory can be applied to a specific social disclosure using variables that are idiosyncratically applicable to the types of disclosures.

Numerical Investigation of Curing Process in Reaction Injection Molding of Rubber for Quality Improvements

2011 ◽  
Vol 462-463 ◽  
pp. 1206-1211 ◽  
Author(s):  
Seyyed Mohammad Javadi ◽  
Mohammad Moghiman ◽  
Mohammad Reza Erfanian ◽  
Naseh Hosseini
Keyword(s):  
Three Dimensional ◽  
Measured Data ◽  
Production Costs ◽  
Curing Process ◽  
Quality Improvements ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Final Temperature ◽  
Reaction Injection Molding

A large number of rubber products are formed into their final shape by vulcanization. In particular, curing process of rubber is the final step in manufacturing many rubber products and determines both the quality of the resulting product as well as production costs. This paper is devoted to the simulation of rubber curing process in a three-dimensional model. The effects of final temperature of mold are investigated on curing process and quality of final product. The results were compared with the experimentally measured data, which confirmed the accuracy and applicability of the method.

scholarly journals Influence of Geometric Features Associativity of CAD Class Models on the Process of Their Updating – Comparative Analysis

2021 ◽  
Author(s):  
Grzegorz Świaczny
Keyword(s):  
3D Model ◽  
Three Dimensional ◽  
Optimal Solution ◽  
3D Models ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Initial Design ◽  
The Individual ◽  
Class Models ◽  
Positive Effect

This article deals with the topic of one of the most important features of modern CAx class systems – associativity. The term refers to the ability to form relations (links) between two or more objects (in terms of their selected features), and with the consequence creating an associative (linked) three-dimensional model. The author pays special attention to the very process of creating relations between objects, as it has a key impact on the structural stability of CAD class models, and thus on their susceptibility to possible modifications. To show that not all associativity brings a positive effect, the author presents two examples of its implementation. In order to emphasize the influence of the method of linking individual elements, both examples are based on the same 3D model – a thin-walled part with a positioning pin. That means the geometric form of the default part is the same, whereas only relations of the individual objects of the 3D model change. In the first scenario, correctly defined relations between objects make that the positioning pin offset does not affect the initial design conditions. The second scenario shows an incorrect implementation of associativity, as a result of which the same operation of positioning pin offset gives non-compliance with the initial design conditions and with the consequence an undesirable change in its geometry. The article is an attempt to draw attention to the fact that the associative structure of 3D models is not always equal to the optimal solution. Only the well-thought-out nature of associativity allows to use all its advantages.

scholarly journals Modeling in AUTOCAD for bachelors

2021 ◽  
pp. 25-28
Author(s):  
Л.В. Карпюк ◽  
Н.О. Давіденко
Keyword(s):  
3D Model ◽  
Three Dimensional ◽  
Model Space ◽  
Educational Process ◽  
Point Of View ◽  
Two Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Three Dimensional Objects ◽  
Graphic Editor

The article discusses the methods of using the AutoCad graphic editor for creating three-dimensional objects. The possibilities of three-dimensional modeling in the AutoCad graphic editor for optimizing the educational process of bachelors of technical specialties are also considered. The article analyzes the best ways to create mechanical engineering drawings.The most developed software tool for the production of design documentation is AutoCAD - a universal graphic design system. Creating models of any complexity in space by using this graphic editor, the user will be able to see their relative position, estimate the distance between them. The model can be freely moved in space, viewing many options. The ability to control the point of view allows to conveniently select the view of the 3D model that is being developed. Zooming, panning in real time with the ability to freely rotate the camera around the model provide the ability to quickly view objects from any point of view. The article provides examples of choosing the most optimal option for creating a three-dimensional model. The traditional way to create a 3D model drawing is to make 2D views of the model. When creating a flat drawing, there is a possibility of error when making projections, since they are created independently from each other and consist of several images. It is rather difficult to represent an object in space from a flat drawing. At present, modern software graphic editors are aimed at creating three-dimensional models that allow to create realistic models and, on their basis, get two-dimensional projections. Graphic editor AutoCad allows to create three-dimensional objects based on standard commands, in the form of a cylinder, cone, box, torus, etc., when editing which you can get the desired shapes. After creating a three-dimensional model, the user can get its two-dimensional projections not only on the main planes, but also on any plane at will. The 3D modeling method allows you to create a complex drawing with any number of images based on a 3D model. There are ways to create 2D plane drawings from a 3D model and the ability to edit ready-made designs that can be inserted from model space into paper space. Editing takes place by changing the parameters of a 3D object in model space, and these changes are automatically reflected in paper space. This method allows us to use the tools to quickly create a system of 3-4 linked views for a 3D AutoCad model.

scholarly journals Three-Dimensional Model Extraction and Parameter Measurement of Cerebral Hemangioma Based on Mimics

2022 ◽  
Vol 2160 (1) ◽  
pp. 012012
Author(s):  
An Qu ◽  
Tianmin Guan ◽  
Tianxiang Gan ◽  
Yuanyuan Li ◽  
Zhuang Lin ◽  
...  
Keyword(s):  
Therapeutic Effect ◽  
Cerebral Angiography ◽  
Structural Design ◽  
3D Model ◽  
Three Dimensional ◽  
The Body ◽  
Model Reconstruction ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
3D Model Reconstruction

Abstract In this paper, Mimics is using to reconstruct the 3D model of hemangioma from 2D cerebral angiography images. The process of 3D model reconstruction is formulated. The hemangioma model is extracted and the parameters of the hemangioma are measured, which provided a model basis for the structural design of the spring coil. The shape and structure of the coil are very important for the therapeutic effect. During the treatment, the coil is implanted into the hemangioma from outside the body through a catheter.

scholarly journals Reconstruction of an architectural object. Case study: Citadel fort No. 33 “Krakus” in Krakow

2018 ◽  
Vol 63 ◽  
pp. 00010
Author(s):  
Izabela Piech ◽  
Boguslawa Kwoczynska ◽  
Artur Ciszewski
Keyword(s):  
Point Cloud ◽  
3D Model ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Field Work ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Laser Measurements ◽  
The University

The aim of the study was to recreate, in the form of a 3D model, the Citadel fort No. 33 “Krakus” in Krakow. The data on the basis of which the three-dimensional model was made were obtained using a Leica ScanStation P40 terrestrial laser scanner, which is owned by the Faculty of Environmental Engineering and Geodesy of the University of Agriculture Hugona Kollataj in Krakow. The scope of field work included performing laser measurements, and then processing the point cloud in the Leica Cyclone 3D program and creating a full architectural model in SketchUp 2016.

Numerical Simulation on Drawing Deep of Cylindrical Pieces Based on Dynaform

2014 ◽  
Vol 684 ◽  
pp. 252-258 ◽  
Author(s):  
Jun Hong Wang ◽  
Xu Dong Bao ◽  
Hai Mei Feng ◽  
Chang Du
Keyword(s):  
Numerical Simulation ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Forming Process ◽  
Minimum Thickness ◽  
Optimum Parameters ◽  
Design And Manufacture ◽  
The Impact

Abstract: The design and manufacture of mold often rely on the experience of the designers, which led to the fact that the mold needs to be repeatedly debugged and corrected. Numerical simulation technology enables the simulation of the forming process of sheet metal and prediction of defects in design, thus to improve labor efficiency, save time and reduce costs. In this paper, the software Dynaform is used as a platform and a three-dimensional model is built to numerical simulate and analyze the drawing deep of a typical thin-walled cylindrical piece.Orthogonal experimentis adopted to analyze the impact of BHF, punching speed and punch-die gap on forming quality of the drawing pieces. With minimum thickness and wrinkling as indicators, the impact of various factors is analyzed and a set of optimum parameters is found out that is, BHF is 20kN, punching speed is 2000mm / s and punch-die gap is 0.9mm.

Sign in / Sign up

Export Citation Format

Share Document