scholarly journals Effect of drought stress on agro-morphological traits of lentil (Lens culinaris Medik.) recombinant inbred lines

2016 ◽  
Vol 41 (2) ◽  
pp. 207-219 ◽  
Author(s):  
MH Rahimi ◽  
S Houshmand ◽  
M Khodambashi ◽  
B Shiran ◽  
S Mohammady
Keyword(s):  
Drought Stress ◽  
Seed Yield ◽  
Morphological Traits ◽  
Recombinant Inbred Lines ◽  
Inbred Lines ◽  
Leaf Length ◽  
Tolerance Index ◽  
Plant Seed ◽  
Biological Yield ◽  
Pod Number

To evaluate the effect of drought stress on agro-morphological traits of lentil, an experiment was conducted using 168 F6:7 inbred lines along with their parents in RCB design with three replications. Analysis of variance revealed significant differences among lines in terms of all studied characters in both normal and stress conditions. Comparing with non-stress condition, drought stress reduced pod weight per plant, seed yield and pod number per plant to 54%, 45.3% and 42.2%, respectively. Correlation coefficient of biological yield, pod number per plant, pod weight per plant and harvest index (HI) with seed yield was positive and significant. Stepwise regression analysis showed that biological yield, HI, pod weights per plant and leaf length determined 87.6% of seed yield variations and biological yield had the most function. Maximum values of genotypic and phenotypic coefficient of variations were observed for seed yield, pod weight per plant and pod number per plant. The highest values of heritability found in leaf width (h2= 0.77), seed diameter (h2= 0.69) and plant height (h2= 0.66). Evaluation of stress tolerance index (STI) showed that lines 125 and 160 were the most tolerant lines, which could be recommended for cultivation in areas that subject to terminal drought stress.Bangladesh J. Agril. Res. 41(2): 207-219, June 2016

scholarly journals Response of Canola Advanced Lines to Delay Plantings upon Late Season Drought Stress

2017 ◽  
Vol 1 ◽  
pp. 307
Author(s):  
Amir Hosein Shirani Rad ◽  
Nasser Shahsavari ◽  
Nadia Safavi Fard
Keyword(s):  
Drought Stress ◽  
Seed Yield ◽  
Seed Weight ◽  
Planting Date ◽  
Stress Conditions ◽  
Seed Number ◽  
Plant Seed ◽  
Late Season ◽  
Formation Stage ◽  
Pod Number

     In order to evaluation of canola advanced lines response to delay plantings under late season drought stress conditions, an experiment was carried out in a factorial split-plot arrangement based on RCBD with three replications during two years (2012-2014) in Karaj of Iran. Treatments were; (1): Planting date in two levels (16 October and 1 November), (2): irrigation, in two levels (I1: normal irrigation as control and I2: restricted irrigation after pod formation stage) as main plots and (3): twelve oilseed rape genotypes as sub plots such as BAL2, BAL1, BAL3, BAL6, BAL8, BAL9, BAL11, BAL15, L72, R15, L109 and Okapi. The interaction effects of planting date, irrigation and genotype on pod number per plant, seed number per pod, 1000-seed weight, seed yield, and oil yield were significant at 1% level probability. The maximum seed yield under planting at the appropriate time (16 October), normal irrigation and drought stress conditions (restricted irrigation after pod formation stage) was observed in Okapi and L109, respectively). Among genotypes, R15 line under delay planting (1 November) and both normal irrigation and drought stress conditions (restricted irrigation after pod formation stage) showed the maximum seed yield.

scholarly journals Component traits influencing seed yield in recombinant inbred lines of lentil (Lens culinaris Medik.)

2017 ◽  
Vol 9 (2) ◽  
pp. 992-997
Author(s):  
Alok Kumar ◽  
R. K. Gill ◽  
Sarvjeet Singh
Keyword(s):  
Seed Yield ◽  
Recombinant Inbred ◽  
Harvest Index ◽  
Recombinant Inbred Lines ◽  
Inbred Lines ◽  
Yield Improvement ◽  
Component Traits ◽  
Biological Yield ◽  
Positive Direct ◽  
Selection Of

One hundred and thirty five RILs (Recombinant Inbred Lines) developed from a cross between an indigenous and exotic line of lentil (Lens culinarisMedik.)were evaluated for seed yield and component traits during rabi 2012-13 and 2013-14. Pooled analysis of variance revealed significant differences among the RILsfor all the traits studied. This suggested that there was ample scope for selection of promising RILs for yield improvement in lentil. Phenotypic and genotypic coefficients of variation were high for pods per plant(32.49% and 26.75%) followed by biological yield per plot(24.38% and 21.28%). Genetic advance was highest for 100-seed weight(47.75%)followed by pods per plant(45.39%). Estimation of phenotypic correlation coefficients indicated that seed yield per plot expressed highly significant and positive correlation with biological yield per plot(0.634), harvest index(0.300) and seeds per pod(0.156). Path coefficient analysis revealed that the traits; biological yield per plot , harvest index, number of pods per plant, days to 50% flowering, days to maturity , plant height and primary branches per plant had positive direct effect on seed yield per plot. The selection of these traits would be helpful for further yield improvement in lentil.

The response of alfalfa genotypes to different concentrations of mobile aluminium

2021 ◽  
pp. 1-10
Author(s):  
A. Liatukienė ◽  
R. Skuodienė
Keyword(s):  
Seed Yield ◽  
Morphological Traits ◽  
Acid Soil ◽  
Screening Method ◽  
Al Toxicity ◽  
Research Centre ◽  
Soil Conditions ◽  
Tolerance Index ◽  
Stem Density ◽  
Plant Vigour

Abstract The morphological traits of alfalfa under acid soil conditions with different mobile aluminium (Al) concentrations were investigated. The study site was Vėžaičiai Branch of the Lithuanian Research Centre for Agriculture and Forestry, 55°70 N, 21°49 E. The experiment featuring the 30 most Al-tolerant alfalfa accessions (populations and cultivars), determined from laboratory trials was established on a Bathygleyic Dystric Retisol in 2018. In 2019 and 2020, the biological and morphological traits were evaluated: plant regrowth, plant height before flowering, wintering, leafiness, stem thickness, plant vigour, stem density, seed yield and resistance to spring black stem leaf spot. The resistance of alfalfa to mobile Al toxicity was determined using a filter-based screening method of selection cycles C1 and C2. The accessions grown in the soil with mobile Al (20.6–23.4 mg/kg) showed better tolerance to Al toxicity in the cycle C2. The hypocotyl tolerance index of these accessions was better at 8, 16, 32 and 64 mm AlCl3 concentrations in the cycle C2. The correlation analysis showed strong significant positive and negative relationships between the morphological traits. A cluster analysis showed that the accessions, grown in the soil with mobile Al (20.6–23.4 mg/kg) were the most resistant to Al toxicity in the cycle C2. These accessions produced a better seed yield and demonstrated lower values of morphological traits compared to cluster 2. Also, these accessions are considered as tolerant to mobile Al toxicity and might be used as donors in breeding for Al toxicity tolerance.

scholarly journals Seed yield and its components of indeterminate and determinate lines in recombinant inbred lines of soybean

2015 ◽  
Vol 65 (2) ◽  
pp. 154-160 ◽  
Author(s):  
Shin Kato ◽  
Kenichiro Fujii ◽  
Setsuzo Yumoto ◽  
Masao Ishimoto ◽  
Tatsuhiko Shiraiwa ◽  
...  
Keyword(s):  
Seed Yield ◽  
Recombinant Inbred ◽  
Recombinant Inbred Lines ◽  
Inbred Lines

scholarly journals The Effect of Organic and Inorganic Fertilization on The Yield and Some Yield Components of Lentil (Lens culinaris Medic.) In Van Conditions

2021 ◽  
Vol 5 (4) ◽  
pp. 786-794
Author(s):  
Cihan YEŞILBAŞ ◽  
Yeşim TOGAY
Keyword(s):  
Seed Yield ◽  
Yield Components ◽  
Block Design ◽  
Chicken Manure ◽  
Seed Number ◽  
Protein Ratio ◽  
Branch Number ◽  
Plant Seed ◽  
Growing Seasons ◽  
Biological Yield

The study was conducted to determine effects of organic and inorganic fertilization on the yield and some yield components in lentil cultivars in 2014-15 growing seasons in Van. The experiment was laid out in a factorial randomised block design with three replications. The study was conducted to determine effects of different fertilizer sources (Control, DAP, Chicken manure and sheep manure) on the yield and some yield components in two lentil cultivars (Özbek and Kafkas). In the study were investigated the plant height, first pod height, branch number per plant, pod and seed number per plant, seed number per pod, biological yield, seed yield per unit, harvest index, 1000-seed weight and protein ratio in seed. The highest seed yield was obtained from chicken manure application of Özbek cultivar with 157.6 kg da-1.  

scholarly journals Determination of the best indirect selection criteria in Iranian durum wheat (Triticum aestivum L.) genotypes under irrigated and drought stress conditions

Genetika ◽  
2015 ◽  
Vol 47 (2) ◽  
pp. 549-558 ◽  
Author(s):  
Ahmad Golparvar ◽  
Mohammad Gheisari ◽  
Davoud Naderi ◽  
Ali Mehrabi ◽  
Amin Hadipanah ◽  
...  
Keyword(s):  
Drought Stress ◽  
Durum Wheat ◽  
Total Variation ◽  
Seed Yield ◽  
Stress Condition ◽  
Spike Density ◽  
Plant Seed ◽  
Wheat Genotypes ◽  
Drought Stress Condition ◽  
Yield Factor

In order to evaluate and classify morphological and morpho-physiological traits of durum wheat genotypes in drought and irrigated conditions 200 durum wheat genotypes were sown in modify augmented design with four replications during 2013- 2014 farming season. Two replications were considered as drought condition and two as irrigated. Factor analysis based on principal component analysis method and varimax rotation indicated that four important factors accounted for about 87 and 92 percent of the total variation among traits in drought and irrigated conditions, respectively. In drought stress condition, the first factor assigned 37 percent of total variation between traits and was significantly related with spike yield and it?s components. Therefore, this factor was regarded as spike seed yield factor. Other factors in drought stress condition accounted for 22, 16 and 12 percent of variation between traits and were entitled as plant seed yield, spike density and assimilate transmission factors, respectively. In irrigated condition, the first factor assigned 36 percent of total variation between traits and was significantly related with traits plant and spike seed yield, plant and spike harvest index, No. seed/spike and plant height. This factor was regarded as plant seed yield factor. Other factors in irrigated condition accounted for 24, 18 and 14 percent of variation between traits and were entitled as production, assimilate transmission and spike density factors, respectively. Overall, results revealed effect of different environments on extracted factors, percent of variation accounted for by factors and traits related with each factor.

scholarly journals Use of the QTL approach to the study of soybean trait relationships in two populations of recombinant inbred lines at the F7 and F8 generations

2006 ◽  
Vol 18 (2) ◽  
pp. 281-290 ◽  
Author(s):  
Antonio José Dias Vieira ◽  
Dario Alves de Oliveira ◽  
Taís Cristina Bastos Soares ◽  
Ivan Schuster ◽  
Newton Deniz Piovesan ◽  
...  
Keyword(s):  
Leaf Area ◽  
Recombinant Inbred ◽  
Recombinant Inbred Lines ◽  
Dry Mass ◽  
Inbred Lines ◽  
Leaf Nitrogen ◽  
Fresh Mass ◽  
Net Assimilation ◽  
Two Populations ◽  
Pod Number

This work aimed to identify the quantitative trait loci (QTL) associated with photosynthesis and growth and productivity traits of soybean and to study possible associations between these traits by the analysis of coincidence of QTL in linkage groups (LGs). Thus, populations of recombinant inbred lines (RILs) of the F7 and F8 generations derived from the cross between the varieties BARC-8 and Garimpo were used. The traits evaluated were net assimilation rate of CO2 under saturating light (Asat), potential photosynthesis rate (Pmax), leaf area (A), specific leaf area (SLA), specific leaf nitrogen (N); root (W R), nodule (W N), stem (W ST), leaf (W L), pod (W P) and plant dry mass (W T); nodule (nN), seed (n s), and pod number (nP); seed fresh mass per plant (W S), one-hundred seed fresh mass (W HS) and seed protein percentage (P%). It was possible to identify the following QTL associated with the following soybean traits: SLA, Asat, N, W R, W ST, W L, W T, W P, W HS, n s and nP, indicating that the RIL population has a great potential for mapping loci associated with quantitative traits of the soybean crop. The correlations between the soybean traits were partially confirmed by coincidence of QTL.

Heritabilities and phenotypic correlations of morphological traits of beans

1969 ◽  
Vol 73 (4) ◽  
pp. 349-359
Author(s):  
Manuel Mateo Solano ◽  
James S. Beaver ◽  
Freddy Saladín-García
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Harvest Index ◽  
Morphological Traits ◽  
Yield Potential ◽  
Narrow Sense ◽  
Node Number ◽  
Phenotypic Correlations ◽  
Biological Yield ◽  
Number Of Branches

Indeterminate bean (Phaseolus vulgaris L.) lines derived from crosses between small-seeded indeterminate and large-seeded determinate genotypes were used for estimating the heritabilities and phenotypic correlations for seed yield and morphological traits. The F2 generation of six bean populations was planted at the Fortuna Substation, Juana Díaz, Puerto Rico in October 1984. Seed yield per plant, number of branches per plant, plant height, node number per plant, biological yield, and apparent harvest index were measured for 50 indeterminate plants selected at random from each population. Fifty plant rows of each population were planted in February 1985 at the Fortuna Substation, and in March 1985 on a small farm in the Constanza valley of the Dominican Republic. Narrow sense heritabilities were estimated with parent-offspring regressions of the F2 and F3 generations, and phenotypic correlations were estimated with means of the F3 lines. The indeterminate F3 lines had greater plant height and fewer nodes than their indeterminate parents. Biological yields, harvest indexes and number of branches of the F3 plants were generally equal to or less than those of their indeterminate parents. Greater branch and node number and greater plant height, biological yield, and harvest index were associated with greater seed yield. Narrow sense heritabilities (NSH) of morphological traits were generally low to intermediate. Since NSH of the morphological traits were no greater than NSH of seed yield, replicated advanced generation yield trials still appear to be the most effective approach for identifying large-seeded indeterminate bean lines with greater seed yield potential.

Association among genetic parameters in Indian mustard (Brassica juncea L. Czern and Coss.)

2018 ◽  
Vol 3 (01) ◽  
pp. 11-15
Author(s):  
Vipin Kumar Malik ◽  
Shiv Kumar Singh ◽  
Vijay Kumar ◽  
Norang Pal Singh ◽  
Ankit Malik ◽  
...  
Keyword(s):  
Brassica Juncea ◽  
Seed Yield ◽  
Seed Weight ◽  
Harvest Index ◽  
Indian Mustard ◽  
Flowering Plant ◽  
Genetic Advance ◽  
Gene Effects ◽  
Plant Seed ◽  
Biological Yield

The considerable amount of genetic variability on the basis of GCV and PCV estimates for the traits; days to 50% flowering, numbers of primary and secondary branches per plant, length of siliqua, 1000-seed weight, seed yield per plant, biological yield per plant and harvest index were found in thirty five genotypes of Indian mustard (Brassica juncea L. Czern and Coss). Heritability and genetic advance were higher for days to 50% flowering, plant height and biological yield per plant. Although, number of secondary branches per plant, seed yield per plant and harvest index had moderately high heritability with moderate genetic advance indicating additive gene effects and selection pressure could be applied on them for yield improvement leads to fast genetic improvement of the materials. Days to 75% maturity, length of siliqua, 1000-seed weight and oil content had low heritability indicating that these traits were under the influence of environmental factors and selection on the basis of these traits could not be effective.

Sign in / Sign up

Export Citation Format

Share Document