scholarly journals Analisa Getaran Akibat Kerusakan Deep Grove Ball Bearing Seri 6003RS

2019 ◽  
Vol 9 (02) ◽  
pp. 39-43
Author(s):  
Muhamad Riva’i ◽  
Nanda Pranandita
Keyword(s):  
Ball Bearing ◽  
Rolling Bearing ◽  
Internal Diameter ◽  
Outer Diameter ◽  
Outer Race ◽  
Deep Groove ◽  
Deep Groove Ball Bearing ◽  
Rolling Element ◽  
Rolling Elements ◽  
Vibration Measuring

Measurement of the damage of elements in bearing can be by measuring the vibration generated in the form of a frequency signal when the pad is rotating. Measurement of vibration on the bearing by using vibration measuring instrument. Damage to the rolling bearing includes damage to the cage, outer ring, inner ring and balls. The rolling bearings used in this study are deep groove ball bearing type 6003 RS with internal diameter (d) = 17 mm, outer diameter (D) = 35 mm, bearing thickness (B) = 10, number of rolling elements (Nb) = 10 pieces, and the diameter of the rolling element (Bd) = 4.75 mm. In the rotation of the bearing (Fr) = 2003 rpm (33.38 Hz) we found the experimental results of bearings that have been damaged in the outer race at 138 Hz frequency, inner race damage at 196 Hz frequency, (ball) at a frequency of 88.8 Hz and cage damage at a frequency of 13.8 Hz.

scholarly journals Analisa Kerusakan Bantalan Bola (Ball Bearing) Berdasarkan Signal Getaran

2019 ◽  
Vol 10 (02) ◽  
pp. 41-46
Author(s):  
Muhamad Riva’i ◽  
Nanda Pranandita
Keyword(s):  
Ball Bearing ◽  
Rolling Bearing ◽  
Internal Diameter ◽  
Outer Diameter ◽  
Outer Race ◽  
Deep Groove ◽  
Deep Groove Ball Bearing ◽  
Rolling Element ◽  
Rolling Elements ◽  
Vibration Measuring

Measurement of the damage of elements in bearing can be by measuring the vibration generated in the form of a frequency signal when the pad is rotating. Measurement of vibration on the bearing by using vibration measuring instrument. Damage to the rolling bearing includes damage to the cage, outer ring, inner ring and balls. The rolling bearings used in this study are deep groove ball bearing type 6003 RS with internal diameter (d) = 17 mm, outer diameter (D) = 35 mm, bearing thickness (B) = 10, number of rolling elements (Nb) = 10 pieces, and the diameter of the rolling element (Bd) = 4.75 mm. In the rotation of the bearing (Fr) = 2003 rpm (33.38 Hz) we found the experimental results of bearings that have been damaged in the outer race at 138 Hz frequency, inner race damage at 196 Hz frequency, (ball) at a frequency of 88.8 Hz and cage damage at a frequency of 13.8 Hz

Noise calculation method of deep groove ball bearing caused by vibration of rolling elements considering raceway waviness

2021 ◽  
pp. 095440622110458
Author(s):  
Minjie Sun ◽  
Haojie Xu ◽  
Qi An
Keyword(s):  
Ball Bearing ◽  
Axial Direction ◽  
Rolling Bearing ◽  
Mechanical Analysis ◽  
Machining Accuracy ◽  
Surface Waviness ◽  
Random Surface ◽  
Deep Groove ◽  
Deep Groove Ball Bearing ◽  
Rolling Elements

Raceway waviness error is the main reason to cause rolling elements to vibrate along axial direction and emit noise. In this paper, the mechanical analysis on deep groove ball bearing is carried out. With auto-correlation function, random surface waviness of both inner and outer raceways is simulated. A contact model of rolling elements and raceways considering surface waviness is established. Combining with the theory of acoustic equation, a calculation model is established for the noise caused by vibration of rolling elements and inner ring. The results show that with the decrease of machining accuracy, the noise of rolling elements increases due to axial vibration; with the increase of rotation speed, the noise also increases. Besides, the spectrum of radiation noise of inner raceway with different waviness amplitudes is given. The results indicate that the 3-D waviness on raceway surface has an influence on the vibration and the noise emitted by both rolling elements and inner ring, and provide guidance for sound control in deep groove rolling bearing.

FINITE ELEMENT SIMULATION OF THE MOTION PROCESS FOR DEEP-GROOVE BALL BEARING

2008 ◽  
Vol 07 (01) ◽  
pp. 9-13 ◽  
Author(s):  
QI RONG ◽  
TENGJIAO LIN ◽  
YIMIN SHAO
Keyword(s):  
Finite Element ◽  
Finite Element Simulation ◽  
Ball Bearing ◽  
Contact Point ◽  
Rolling Bearing ◽  
Element Simulation ◽  
Deep Groove ◽  
Deep Groove Ball Bearing ◽  
Rolling Element ◽  
Motion Process

Considering the radial load and rotational speed of bearing, the finite element (FE) model for dynamic contact of deep-groove ball bearing was established by the software — ANSYS. Based on explicit dynamic finite element method, the nodal displacement, velocity of rolling bearing and stress of rolling element were obtained. Through calculating, it could be seen that the maximum velocity was shown at the contact point between the rolling element and the inner ring, while the minimum velocity was shown at the contact point with outer ring. The maximum equivalent stress and shear stress of the bearing were also occurred at the contact point of raceway, and the inner ring was bigger than the outer ring. The finite element simulation of the motion process for deep-groove ball bearing had a guiding significance to the research of dynamic load between the rolling bearing components as well as the dynamic characteristics of rolling bearing.

Contact Stress FEM Analysis of Deep Groove Ball Bearing Based on ANSYS Workbench

2014 ◽  
Vol 574 ◽  
pp. 21-26 ◽  
Author(s):  
Hua Rong Xin ◽  
Lin Zhu
Keyword(s):  
Contact Stress ◽  
Ball Bearing ◽  
Fem Analysis ◽  
Bearing Contact ◽  
Deep Groove ◽  
Deep Groove Ball Bearing ◽  
Rolling Elements ◽  
Practical Engineering ◽  
Stress And Deformation ◽  
Ansys Workbench

The 3D nonlinear contact model of a deep groove ball bearing was established in ANSYS Workbench software. With the reasonable setting of the boundary conditions,the contact stress and deformation are calculated in Static Structural (ANSYS) by using the finite element method,and the contact stress and deformation of the inner ring, the outer ring and the rolling elements were obtained. Furthermore, the computational values are consistent with the Hertz values. The results show that solving the bearing contact problem with ANSYS Workbench software is feasible and it coincides with the stress and deformation of the actual situation. The FEM results provide reference for the design,optimization and failure analysis of rolling bearings and have practical engineering value.

Location of an acoustic emission source in a radially loaded deep groove ball-bearing

1998 ◽  
Vol 212 (1) ◽  
pp. 33-45 ◽  
Author(s):  
D Nélias ◽  
T Yoshioka
Keyword(s):  
Acoustic Emission ◽  
Ball Bearing ◽  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Bearing ◽  
Rolling Contact ◽  
Fatigue Initiation ◽  
Deep Groove ◽  
Deep Groove Ball Bearing ◽  
Subsurface Defect

This paper describes a deep groove ball-bearing analysis which has been developed to simulate acoustic emission occurring during ball-bearing operation. The computer simulation is useful to clarify experimental research on rolling contact fatigue initiation using the acoustic emission technique. Results show the ability of the method to detect and to locate a subsurface defect, due to rolling contact fatigue, before the rolling bearing failure occurs. The subsurface defect can be accurately located within the inner ring of a deep groove ball-bearing operating under radial load.

The Reliability Virtual Experiment Based on Deep Groove Ball Bearing

2008 ◽  
Vol 44-46 ◽  
pp. 893-900 ◽  
Author(s):  
Chang Li ◽  
Zhi Li Sun
Keyword(s):  
Finite Element ◽  
Contact Stress ◽  
Ball Bearing ◽  
Contact Process ◽  
Adaptive Mesh ◽  
Virtual Experiment ◽  
Outer Race ◽  
Deep Groove ◽  
Deep Groove Ball Bearing ◽  
Bearing System

With the application of explicit dynamics and probability finite element method, reliability virtual experiment of deep groove ball bearing is carried out. Based on self –adaptive mesh module of the ANSYS/LS-DYNA, true numerical simulation of the working process is presented after the three-dimensional finite element bearing model is built. Then, the contact stress and strain among balls, retainer and inner (outer) race and also the pressure law during the contact process are obtained. As the randomness of manufacture and assemblage tolerance is inevitable, Monte Carlo method is adopted when samples the bearing system. From the random sampling, a large sample data of the maximum contact stress is got and the reliability coefficient is calculated; and the contribution of each original manufacture error to the reliability sensitivity of the bearing is analyzed. Reliability virtual experiment offers a theoretical reference to fatigue strength calculation and dynamic optimum design of the bearing system, and the analysis process is easy to be program controlled.

scholarly journals Performance of 75-Millimeter Bore Arched Outer-Race Ball Bearings

1977 ◽  
Vol 99 (3) ◽  
pp. 346-352 ◽  
Author(s):  
H. H. Coe ◽  
B. J. Hamrock
Keyword(s):  
Experimental Data ◽  
Computer Program ◽  
Analytical Study ◽  
Ball Bearing ◽  
Ball Bearings ◽  
Shaft Speed ◽  
Operating Characteristics ◽  
Outer Race ◽  
Deep Groove ◽  
Deep Groove Ball Bearing

An investigation was performed to determine the operating characteristics of 75-mm bore, arched outer-race bearings, and to compare the data with those for a similar, but conventional, deep groove ball bearing. Further, results of an analytical study, made using a computer program developed previously, were compared with the experimental data. Bearings were tested up to 28,000 rpm shaft speed with a load of 2,200 N (500 lb). The amount of arching was 0.13, 0.25, and 0.51 mm (0.005, 0.010, and 0.020 in.). All bearings operated satisfactorily. The outer-race temperatures and the torques, however, were consistently higher for the arched bearings than for the conventional bearings.

Comparing of Temperatures of Rolling Bearing under the Oil-Air Lubrication to the Spray Lubrication

2013 ◽  
Vol 395-396 ◽  
pp. 763-768 ◽  
Author(s):  
Qi Guo Sun ◽  
Yue Fei Wang ◽  
Ying Wang ◽  
Hong Bo Lv
Keyword(s):  
Rotational Speed ◽  
Ball Bearing ◽  
Convective Heat Transfer Coefficient ◽  
Rolling Bearing ◽  
High Rotational Speed ◽  
Geometry Model ◽  
Deep Groove ◽  
Deep Groove Ball Bearing ◽  
Air Lubrication ◽  
Bearing Raceway

The heat generating mechanism inside the cavity of rolling bearing is analyzed and the convective heat transfer coefficient of bearing raceway surface in different rotational speed is calculated under the oil-air lubrication and the spray lubrication in this paper. The fluid domain geometry model of deep groove ball bearing SKF6208 is established, employing the flow field module in Workbench. The comparing simulations of the temperatures of rolling bearing cavity under the oil-air lubrication to the spray lubrication are done in different rotational speed. The simulation results show that the highest temperature of bearing cavity with the oil-air lubrication is almost the same to the spray lubrication when the bearing rotational speed is lower, and the highest temperature of bearing cavity with the oil-air lubrication is far lower than the spray lubrication when the bearing rotational speed is higher. Those conclusions verify the advantages of the oil-air lubrication in high rotational speed.

Numerical Study on Rolling Bearing Temperature Field under the Oil-Air Lubrication

2014 ◽  
Vol 487 ◽  
pp. 580-584
Author(s):  
Qi Guo Sun ◽  
Yue Fei Wang ◽  
Ying Wang ◽  
Peng Niu ◽  
Xiong Shi Wang
Keyword(s):  
Temperature Field ◽  
Ball Bearing ◽  
Numerical Study ◽  
Quantitative Relationship ◽  
Rolling Bearing ◽  
Deep Groove ◽  
Deep Groove Ball Bearing ◽  
Air Lubrication ◽  
Lubrication Mode ◽  
Heat Value

Speed of rolling bearing and flow rate of air have important influences on the bearing’s working temperature under the oil-air lubrication mode. Based on basic principle of lubrication, one of the heat productivity equations of deep groove ball bearing is selected to calculate the heat value of bearing’s cavity. The bearing’s temperature field is simulated by Fluent at different rotational speeds and air flow rates. Results of the simulation show that the highest temperatures of bearing have a quantitative relationship with the bearing’s rotational speeds. The relationships between the velocity of inlet and heat transfer coefficient, viscosity of the lubricant and the heating of bearing are analyzed in the end of this paper.

Parametric Design of Deep Groove Ball Bearing Based on Pro/Program and Family Table

2014 ◽  
Vol 721 ◽  
pp. 113-117
Author(s):  
Nai Ming Miao
Keyword(s):  
Ball Bearing ◽  
Parametric Design ◽  
Three Dimensional ◽  
Rolling Bearing ◽  
Design Environment ◽  
Improve Design ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Deep Groove ◽  
Deep Groove Ball Bearing

Due to the same series of rolling bearing standard part with the same topology structure and different dimension parameters, a series of rolling bearing products can be designed by parametric design method. Based on the development tool of Pro/Program and family table combined with three-dimensional modeling, this paper takes deep groove ball bearing for example to discuss the means and steps of rolling bearing parametric design. By entering the relevant parameters, such as the bearing outside diameter, bearing inside diameter, bearing width, ball number and other known conditions, we can accurately and quickly generate a new rolling bearing solid model. The result shows that in the design environment of Pro/ENGINEER, using parametric design to make three-dimensional modeling can shorten design cycle time and improve design efficiency significantly.

Sign in / Sign up

Export Citation Format

Share Document