scholarly journals The Effect of Gaseous Ozone Generated by Surface Dielectric Barrier Discharge on the Decay and Quality of Stored Onion Bulbs

Agronomy ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1058
Author(s):  
Junghyun Lim ◽  
Jong-Seok Song ◽  
Sangheum Eom ◽  
Jung Woo Yoon ◽  
Sang-Hye Ji ◽  
...  
Keyword(s):  
Untreated Control ◽  
Color Change ◽  
Microbial Reduction ◽  
Ozone Exposure ◽  
Onion Bulbs ◽  
Gaseous Ozone ◽  
Surface Dielectric Barrier Discharge ◽  
Postharvest Loss ◽  
High Voltage Discharge

An effective and eco-friendly technology is needed to prevent postharvest loss of onion bulbs during cold storage. This study investigated the effect of gaseous ozone on the decay and quality of onion bulbs during storage at 2 °C and 70% relative humidity for two months. Gaseous ozone was adjusted to a concentration of 1.27 ± 0.024 ppm in the storage room by generating a high voltage discharge in air. After two months of storage, gaseous ozone significantly reduced the counts of aerobic bacteria (e.g., Rahnella aquatilis) and fungi (e.g., yeast and mold) in the onion bulbs by 4 log (CFU g−1) and 0.92 log (CFU g−1) compared with those of an untreated control, respectively. The microbial reduction by gaseous ozone resulted in a lower rotten rate of the onion bulbs, which was less than 20.0% compared with that of the untreated control. Moreover, the ozone exposure extended the storage life of the onion bulbs by delaying its color change and softening during storage. Our results suggest that gaseous ozone can control the decay of onion bulbs safely during storage.

Impact of sanitizer solutions on microbial reduction and quality of fresh-cut pennywort (Centella asiatica) leaves

2021 ◽  
Author(s):  
Siti Zaharah Rosli ◽  
Mohd Adzahan Noranizan ◽  
Son Radu ◽  
Roselina Karim ◽  
Noraniza Mohd Adzahan ◽  
...  
Keyword(s):  
Centella Asiatica ◽  
Microbial Reduction ◽  
Fresh Cut

scholarly journals Effect of Vector Control and Foliar Nutrition on the Quality of Orange Juice Affected by Huanglongbing: Sensory Evaluation

HortScience ◽  
2017 ◽  
Vol 52 (8) ◽  
pp. 1092-1099 ◽  
Author(s):  
Anne Plotto ◽  
Elizabeth Baldwin ◽  
Jinhe Bai ◽  
John Manthey ◽  
Smita Raithore ◽  
...  
Keyword(s):  
Orange Juice ◽  
Untreated Control ◽  
Orange Peel ◽  
Foliar Nutrition ◽  
Insecticide Treatment ◽  
Fundamental Knowledge ◽  
Valencia Orange ◽  
Orange Trees ◽  
Negative Attributes

A 3-year study was undertaken to establish the effect of field nutritional sprays, combined with insecticide treatments or not against Asian Citrus psyllid, on the fruit quality of ‘Valencia’ orange trees affected by the greening disease Huanglongbing (HLB). Four replicated plots were harvested, juiced, and pasteurized. Nine to twelve trained panelists evaluated the juice using seven flavor, five taste, four mouthfeel and three aftertaste descriptors. There was little difference between treatments in 2013; only orange peel flavor and bitterness were significantly lower for the insecticide treatment. In 2014, positive attributes, such as orange and fruity flavor, sweetness and mouthfeel body, were significantly higher in the insecticide treatment. Sourness was highest in untreated control, and there were no differences between treatments for bitterness. In 2015, negative attributes, such as grapefruit, orange peel and typical HLB flavor, sourness, bitterness, and astringency, were significantly higher in untreated control fruit, suggesting perhaps that the beneficial effect of nutritional and insecticide treatments was cumulative, only manifesting on the 3rd year of the study, and or because of the progression of the disease affecting untreated controls. Data are discussed in relation to juice chemical composition, including volatiles, sugars, acids, limonoids, and flavonoids, adding to the fundamental knowledge concerning chemical drivers of orange flavor.

scholarly journals Effect of Packaging Material, Storage Temperature and Duration on the Quality of Semi-Processed Adult House Cricket Meal

2017 ◽  
Vol 7 (1) ◽  
pp. 21 ◽  
Author(s):  
Edwin Kamau ◽  
Christopher Mutungi ◽  
John Kinyuru ◽  
Samuel Imathiu ◽  
C. Tanga ◽  
...  
Keyword(s):  
Storage Time ◽  
Storage Temperature ◽  
Color Change ◽  
Viable Count ◽  
Ambient Conditions ◽  
House Cricket ◽  
Product Quality And Safety ◽  
Conventional Foods ◽  
Penicillium Spp

Edible insects are widely consumed in different parts of the world and can serve as an alternative nutritional source to conventional foods. Nonetheless, little attention has been given to their quality and shelf life in different packages when exposed to different storage environments. In this study, the effect of storage temperature, duration and type of packaging on the storage stability of the adult house cricket meal was examined. The samples were boiled, solar dried, milled and packaged into polypropylene (PP), plastic (PL) and polyethylene (PL) packages. The samples were then stored for six months in refrigerated and ambient conditions where by changes in physical and biochemical attributes were monitored. Iodine values significantly decreased in all the packages while peroxide, p-anisidine and saponification values significantly increased. SFA, MUFA and PUFA contents reduced during storage although a higher tendency for MUFA and PUFA values was observed in the refrigerated samples. Total viable count (TVC) and yeast and molds counts significantly increased in storage. Three types of fungi; Aspergillus spp., Alternaria spp. and Penicillium spp. were isolated in all the packages. Overall color change steadily decreased with increase in storage time. Deterioration was higher in samples stored in ambient conditions than in refrigeration. The degree of deterioration in the two storage environments among the different packages was in the order; PP>PE>PL. Although the PL package outperformed the other packages it is recommended to carry out sensory analysis and avoid post-processing contamination that can adversely affect the product quality and safety during storage. 

scholarly journals PENGARUH RESIN TERHADAP PERUBAHAN WARNA PADA CAT TEMBOK

2019 ◽  
Vol 5 (2) ◽  
pp. 132
Author(s):  
Nurlela Nurlela ◽  
Risnawati Risnawati
Keyword(s):  
Film Thickness ◽  
Vinyl Acetate ◽  
Polyvinyl Acetate ◽  
Color Change ◽  
Color Difference ◽  
Background Color ◽  
Color Changes ◽  
Synthetic Resins ◽  
Color Background

The Influence of Resin against the Change of Color on the Wall PaintThe quality of the paint is determined by the resin used. Synthetic resins for polymer paints are made by combining several monomers to achieve various characteristics. The incorporation of some monomers such as polyvinyl acetate resin, acrylic vinyl resin and acrylic styrene resin which act as a binder can affect the quality of the paint especially the color change. The purpose of this study is to find the color changes that occur on the wall paint by using Poly Styrene Acrylic , Poly Vinyl Acetate and Poly Vinyl Acrylic. From the results of the measurement of color difference, significant color change occurs in the Poly Vinyl Acetate (PVAc) + Poly Vinyl Acrylic (PVA) and Poly Styrene Acrylic (PSA). The results of the quality test of the three resins based on pH test, scrub test and viscosity test, PSA has better quality compared to PVA + PVAc and PVA resin. From the color difference measurement test, some things need to be considered, are temperature, film thickness, substrate color/background color and measurement conditions (measured in wet sample/in plate/dry surface) and test on resin added additive according to the type of each resin.Keywords: Paint, Resin, Color Changes, Poly Vinyl Acetate, Poly Styrene.ABSTRAK Kualitas dari cat sangat ditentukan oleh resin yang digunakan. Resin sintetis untuk cat berupa polimer yang dibuat dengan menggabung beberapa monomer untuk mencapai berbagai karakteristik. Penggabungan dari beberapa monomer seperti resin poli vinil asetat, resin vinil akrilik dan resin stirena akrilik yang berfungsi sebagai pengikat mampu mempengaruhi kualitas cat terutama dari perubahan warna. Tujuan dari penelitian ini adalah untuk mengetahui perubahan warna yang terjadi pada cat tembok dengan menggunakan Poli Stirena Akrilik, Poli Vinil asetat dan Poli Vinil Akrilik. Dari hasil pengukuran perbedaan warna, perubahan warna cukup signifikan terjadi pada resin Poli vinil Asetat (PVAc) + Poli Vinil Akrilik (PVA) dan resin  Poli Stirena Akrilik (PSA). Hasil uji Kualitas cat dari ketiga resin berdasarkan uji pH, uji scrub dan uji viscositas, PSA memiliki kualitas yang lebih baik dibandingkan dengan resin PVA+PVAc dan PVA. Dari pengujian pengukuran perbedaan warna, beberapa hal yang perlu di perhatikan, yaitu suhu, film thickness, warna substrat/background color dan kondisi pengukuran (diukur dalam keadaan wet sample/dalam bentuk plate/dry surface) dan pengujian terhadap resin yang ditambahkan zat aditif yang sesuai dengan tipe masing-masing resin tersebut.Kata Kunci: Cat, Resin, Perubahan Warna, Poli Vinil, Poli Stirena.

scholarly journals Suitability of bio-extracts with coating materials on physicochemical quality of tomato fruits (Solanum Lycopersicum L.) stored at ambient temperature

2021 ◽  
pp. 347-354
Author(s):  
Fufa Desta Dugassa
Keyword(s):  
Solanum Lycopersicum ◽  
Tomato Fruit ◽  
Garlic Extract ◽  
Maize Starch ◽  
Coating Materials ◽  
Tomato Fruits ◽  
Physicochemical Quality ◽  
Solanum Lycopersicum L ◽  
Postharvest Loss

Tomato (Solanum Lycopersicum L. (or) Lycopersicon esculentum Mill.) is being a very nutritious and health protective food, are highly perishable nature. Its sensitivity to postharvest loss due to poor handling, diseases and physical injury limits its successful marketing. Therefore, simple technology is required to reduce the postharvest loss of this commodity. The use of edible coatings with bio-extracts appears to be a good alternative preservation technique to extend the mature tomato fruits. This study was, therefore, initiated to investigate the effect of using bio- extracts garlic bulba and capsicum incorporation with coating materials (maize starch and beeswax on physicochemical quality of tomato fruit stored at ambient conditions (temperature 15.5 to 20.2oC and relative humidity of 55.5 to 67.3%). The experiment was conducted using complete randomized design of two varieties (Fetane and Melkashola) and six treatments. The tomato fruits were coated by dipping into solution for 3 minutes. The treatments prepared were on coating solution of MGE( 9.5% maize starch with 0.5% garlic extract), MCE (9.5% maize starch with 0.5% capsicum extract), BCE (9.5% beewax mixed with 0.5% capsicum extract), BGE (9.5% beewax mixed with 0.5% garlic extract), 10% maize starch without bio-extract, 10% beewax without bio- extract and control. The treatment means were tested at significance level of P ≤ 0.05. The effectiveness of bio-extracts with coating materials on physicochemical quality of tomato fruits were evaluated at three days intervals for 30 days. There was a significance difference (P<0.05) between coated and uncoated fruits. All coatings delayed tomato ripening and improved the keeping quality parameters but best results were exhibited by 9.5% with 0.5% BCE followed by 9.5% with 0.5% MGE by maintaining the mature tomato fruit for 30 days. The study showed that the Fetane variety has maintained more quality attribute than Melkashola variety during storage.

Plant responses to ozone: Effects of different ozone exposure durations on plant growth and biochemical quality of Brassica campestris L. ssp. chinensis

2020 ◽  
Vol 262 ◽  
pp. 108921 ◽  
Author(s):  
Young Jong Han ◽  
Amir Gharibeshghi ◽  
Inga Mewis ◽  
Nadja Förster ◽  
Winston Beck ◽  
...  
Keyword(s):  
Plant Growth ◽  
Brassica Campestris ◽  
Ozone Exposure ◽  
Plant Responses ◽  
Biochemical Quality

scholarly journals Effect of Drying Methods on Physicochemical Parameters of Different Red Beetroots (Beta vulgaris L.) Species

2019 ◽  
Author(s):  
Dóra Székely ◽  
Klaudia Vidák ◽  
Diána Furulyás ◽  
Ákos Ribárszki ◽  
Mónika Stéger-Máté
Keyword(s):  
Physicochemical Parameters ◽  
Color Change ◽  
Vacuum Drying ◽  
Drying Methods ◽  
Total Polyphenol ◽  
Microwave Vacuum Drying ◽  
Hot Air ◽  
Vacuum Method ◽  
Drying Technology

The aim of this work was to study the influence of atmospheric, vacuum and microwave vacuum drying methods on the quality of dried beetroots. Three different red beetroot species ('Alto F1', 'Cylindra', 'Detroit') were chosen in this study. The microwave vacuum method reduced the total time of drying and decreased the shrinkage compared to the other drying methods. The quality of the dehydrated material was described by its color change, antioxidant capacity, total polyphenol, betacyanin, betaxanthin and each phenolic acids content. The attempts were made to suggest the microwave vacuum method for red beetroot samples as a gentle drying technology to reach a special texture that is favoured by costumers. During the experiments relevant differences could be observed between the investigated beetroot species on the effect of different drying methods. According to the examined parameters the 'Cylindra' species proved the most appropriate beetroot variety for microwave vacuum drying. Based on the results, the combined methods with hot-air at 60 °C followed by microwave vacuum finish drying was the most suitable assay to preserve the investigated parameters in the highest amount.

scholarly journals Effect of Gaseous Ozone Exposure on the Bacteria Counts and Oxidative Properties of Ground Hanwoo Beef at Refrigeration Temperature

2014 ◽  
Vol 34 (4) ◽  
pp. 525-532 ◽  
Author(s):  
Youngjae Cho ◽  
Muhlisin Muhlisin ◽  
Ji Hye Choi ◽  
Tae-Wook Hahn ◽  
Sung Ki Lee
Keyword(s):  
Ozone Exposure ◽  
Gaseous Ozone
Sign in / Sign up

Export Citation Format

Share Document