scholarly journals Performance of New Muchamiel Tomato Lines with Virus Resistance Genes Grafted onto Two Commercial Rootstocks

Agronomy ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 119
Author(s):  
Pedro Carbonell ◽  
José Ángel Cabrera ◽  
Juan Francisco Salinas ◽  
Aránzazu Alonso ◽  
Adrián Grau ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Virus Resistance ◽  
Pure Line ◽  
Fruit Weight ◽  
Se Spain ◽  
Tomato Variety ◽  
Yield Parameters ◽  
Tomato Breeding ◽  
Sensory Parameters ◽  
Grafting Onto

Tomato landraces are regaining interest in Spain because their great fruit quality and value in popular gastronomy. Muchamiel is a traditional tomato variety grown in SE Spain that has been recently improved by the CIAGRO-UMH Tomato Breeding Group, resulting in several lines and hybrids with genetic resistances to virus and most of the original Muchamiel genome. In the current study, two hybrids and one pure line from CIAGRO-UMH and a commercial Muchamiel were grown under conventional conditions to evaluate three different grafting treatments: non-grafting and grafting onto the commercial Beaufort and Maxifort rootstocks. The yield parameters and fruit quality were assessed, and a sensory analysis was performed to evaluate the behavior of every scion/rootstock combination. Overall, significantly worse yield and fruit number in Maxifort-grafted plants were reported; as well as a slight reductions in SSC, fructose, and sucrose; and significant effects on few sensory traits. Instead, Beaufort-grafted plants showed no reduced yield, whereas no differences were reported between grafting treatments in fruit weight, TA, and acid profile, as well as in most of flavor and texture sensory parameters. These results suggest that Muchamiel/Beaufort combination could be suitable under unfavorable conditions, while Maxifort do not seem to provide agronomic nor quality benefits.

scholarly journals Characterization of Tomato Accessions for Morphological, Agronomic, Fruit Quality, and Virus Resistance Traits

2020 ◽  
Author(s):  
Stanislava Grozeva ◽  
Amol N. Nankar ◽  
Daniela Ganeva ◽  
Ivanka Tringovska ◽  
Gancho Pasev ◽  
...  
Keyword(s):  
Molecular Markers ◽  
Fruit Quality ◽  
Virus Resistance ◽  
Fruit Shape ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Tomato Mosaic Virus ◽  
High Yield ◽  
Resistance Traits

Characterization of local germplasm is an effective way to identify elite breeding material and develop improved varieties. This study was aimed to assess 52 tomato accessions comprised of local varieties (28), landraces (8), breeding lines (14), and wild relatives (2) and its characterization for 30 morphological/agronomic, four fruit quality, and Tomato Mosaic Virus (ToMV) resistance traits. Morphological, quality, and ToMV traits were evaluated using phenotyping, biochemical assays, and molecular markers, respectively. Fruit shape and size showed appreciable variation with fruits varied from rounded to heart shape and small to big size. Significant variation was observed for fruit weight (1.6g to 564.8g), fruits per plant (6.0 to 174.7), productivity (130.5g to 5146.5g), soluble solids (4.1% to 8.4%), vitamin C (9.5 mg/100g to 46.4 mg/100g), antioxidant activity (2.5 μmol Fe2+/g FW to 9.6 μmol Fe2+/g FW), and total polyphenols (23.9 GAE/100g FW to 124.2 GAE/100g FW). All accessions were phenotypically screened for the virus resistance in the growth chamber and CAPS molecular markers were used to identify accessions with ToMV Tm-22 resistant alleles and accessions LYC-13, LYC-15, LYC-17, LYC-26, and LYC-52 were identified as resistant. Multivariate analysis of morphological and quality traits showed that 35 principal components (PCs) contributed to the total variation and the first two and twelve PCs explained 47.2% and 90% variation, respectively. The evaluated tomato collection appears to have breeding potential and around 20% accessions of the collection (LYC-6, LYC 17-18, LYC 26-31, LYC 33) are promising genetic resources for variety development that are enriched with enhanced fruit quality and high yield.

Analysis of phenotypic diversity of apricot (Prunus armeniaca L.) accessions from Jammu and Kashmir, India

2021 ◽  
pp. 1-13
Author(s):  
Showkat A. Zargar ◽  
Aijaz A. Wani ◽  
M. I. S. Saggoo
Keyword(s):  
Fruit Quality ◽  
Quantitative Traits ◽  
Fruit Weight ◽  
Kernel Weight ◽  
Prunus Armeniaca ◽  
Quality Traits ◽  
Jammu And Kashmir ◽  
Fruit Length ◽  
Upgma Dendrogram ◽  
Fruit Quality Traits

Abstract Apricot (Prunus armeniaca L.) is a world-wide highly appreciated fruit, with its attractive colour, soft texture and typical flavour. In the current investigation, 68 apricot accessions collected from Jammu and Kashmir, India were analysed to determine the measure of variation using 12 qualitative and 16 quantitative traits with an aim to identify superior apricot accessions with excellent fruit quality traits. High phenotypic variability was observed among the studied apricot accessions with significant differences among most of the qualitative and quantitative traits. Fruit-related characteristics including fruit weight, fruit length, fruit ratio, fruit firmness, fruit shape, fruit suture, stone weight, kernel weight and stone shape were the most diverse with a high coefficient of variation (>30%). One way analysis of variance showed significant differences (P < 0.0001) among all the quantitative traits. Significant positive and negative correlations were observed between all the agronomically important fruit quality traits. The principal component analysis (PCA) revealed that 75.34% of the variability was defined by the first eight components. The unweighted pair group method with arithmetic mean (UPGMA) dendrogram, based on all traits measured grouped the accessions into two main clusters with several sub-clusters. Both UPGMA dendrogram and PCA scatter plot formed a cluster of 14 accessions, having the highest values regarding most important fruit quality traits such as fruit weight, fruit length and width, fruit ratio, stone weight and kernel weight can be treated as potentially superior accessions. These accessions can be used directly for cultivation and in future apricot breeding programmes. The present findings are promising for genetic resource management, cultivar improvement and commercial applications of apricot in Jammu and Kashmir, India.

scholarly journals High-density linkage map construction and identification of loci regulating fruit quality traits in blueberry

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Molla F. Mengist ◽  
Hamed Bostan ◽  
Elisheba Young ◽  
Kristine L. Kay ◽  
Nicholas Gillitt ◽  
...  
Keyword(s):  
Linkage Map ◽  
Fruit Quality ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
High Density ◽  
Soluble Solids ◽  
Quality Traits ◽  
Total Soluble Solids ◽  
Fruit Quality Traits ◽  
High Density Linkage Map

AbstractFruit quality traits play a significant role in consumer preferences and consumption in blueberry (Vaccinium corymbosum L). The objectives of this study were to construct a high-density linkage map and to identify the underlying genetic basis of fruit quality traits in blueberry. A total of 287 F1 individuals derived from a cross between two southern highbush blueberry cultivars, ‘Reveille’ and ‘Arlen’, were phenotyped over three years (2016–2018) for fruit quality-related traits, including titratable acidity, pH, total soluble solids, and fruit weight. A high-density linkage map was constructed using 17k single nucleotide polymorphisms markers. The linkage map spanned a total of 1397 cM with an average inter-loci distance of 0.08 cM. The quantitative trait loci interval mapping based on the hidden Markov model identified 18 loci for fruit quality traits, including seven loci for fruit weight, three loci for titratable acidity, five loci for pH, and three loci for total soluble solids. Ten of these loci were detected in more than one year. These loci explained phenotypic variance ranging from 7 to 28% for titratable acidity and total soluble solid, and 8–13% for pH. However, the loci identified for fruit weight did not explain more than 10% of the phenotypic variance. We also reported the association between fruit quality traits and metabolites detected by Proton nuclear magnetic resonance analysis directly responsible for these fruit quality traits. Organic acids, citric acid, and quinic acid were significantly (P < 0.05) and positively correlated with titratable acidity. Sugar molecules showed a strong and positive correlation with total soluble solids. Overall, the study dissected the genetic basis of fruit quality traits and established an association between these fruit quality traits and metabolites.

scholarly journals The Effect of Weed Competition on Apple Fruit Quality

2017 ◽  
Vol 45 (1) ◽  
pp. 120-125 ◽  
Author(s):  
Ersin ATAY ◽  
Seckin GARGIN ◽  
Ahmet ESITKEN ◽  
N. Pinar GUZEL ◽  
A. Nilgun ATAY ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Fruit Weight ◽  
Apple Orchard ◽  
High Density ◽  
Soluble Solids ◽  
Limiting Factor ◽  
Weed Competition ◽  
Soluble Solids Content ◽  
Solids Content ◽  
Potassium Magnesium

Orchard performance is influenced by weed competition. In this study, the effects of weed competition on nutrient contents, chemical and physical fruit quality properties were sought. The study was carried out in a high-density apple orchard (‘Golden Delicious’/M.9) over two consecutive growing seasons. The effect of weed competition was studied at three different levels: weak, moderate and strong. Fruit firmness, soluble solids content, macronutrients (such as nitrogen, potassium and calcium) and potassium+magnesium/calcium ratio in fruit were significantly affected by weed competition. Strong weed competition negatively affected soluble solids content and potassium+magnesium/calcium ratio. In both trial years, soluble solids content was significantly higher in weak weed competition. In the first year of the study, soluble solids content ranged between 13.77±0.06% (strong weed competition) and 15.20±0.10% (weak weed competition). In the following year, soluble solids content values were determined as 13.13±0.23% in strong weed competition and 13.83±0.21% in weak weed competition. Weak weed competition showed superiority for fruit weight and potassium+magnesium/calcium ratio. As a whole, this study indicates that insufficient weed control in tree rows might be a limiting factor for fruit quality in high-density apple orchards.

Combined use of genetic and genomics resources to understand virus resistance and fruit quality traits in melon

2015 ◽  
Vol 155 (1) ◽  
pp. 4-11 ◽  
Author(s):  
Jason M. Argyris ◽  
Marta Pujol ◽  
Ana Montserrat Martín-Hernández ◽  
Jordi Garcia-Mas
Keyword(s):  
Fruit Quality ◽  
Virus Resistance ◽  
Quality Traits ◽  
Combined Use ◽  
Fruit Quality Traits

scholarly journals EARLY SPRING APPLICATION OF AMINOETHOXYVINILGLYCINE (AVG) INCREASES FRUIT SET AND YIELD OF ‘ROCHA’ PEARS

2017 ◽  
Vol 39 (4) ◽  
Author(s):  
MATEUS DA SILVEIRA PASA ◽  
BRUNO CARRA ◽  
CARINA PEREIRA DA SILVA ◽  
MARLISE NARA CIOTTA ◽  
ALBERTO FONTANELLA BRIGHENTI ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Fruit Set ◽  
Block Design ◽  
Quality Attributes ◽  
Fruit Weight ◽  
Early Spring ◽  
Full Bloom ◽  
Growing Seasons ◽  
Randomized Block Design ◽  
Return Bloom

ABSTRACT The low fruit set is one of the main factors leading to poor yield of pear orchards in Brazil. Ethylene is associated with abscission of flowers and fruitlets. Then, the application of ethylene synthesis inhibitors, such as AVG, is a potential tool to increase fruit set of pears. The objective of this study was to evaluate the effect of AVG, sprayed at different rates and timings, on fruit set, yield and fruit quality of ‘Rocha’ pear. The study was performed in a commercial orchard located in the municipality of São Joaquim, SC, during the growing seasons of 2014/2015 and 2015/2016. Plant material consisted of ‘Rocha’ pear trees grafted on quince rootstock ‘BA29’. AVG was tested at different rates (60 mg L-1 and 80 mg L-1) and timings [full bloom, one week after full bloom (WAFB), and two WAFB), either alone or in combination. The experiment was arranged in a randomized block design, with at least five single-tree replications. The fruit set, number of fruit per tree, yield, estimated yield, fruit weight, return bloom, and fruit quality attributes were assessed. Fruit set and yield were consistently increased by single applications of AVG at 60 and 80 mg L-1 at both one and two weeks after full bloom, without negatively affecting fruit quality attributes and return bloom.

scholarly journals Growth and Yield of Squash Influenced by Leaf Pruning and Gibberellic Acid (GA3)

2021 ◽  
pp. 27-39
Author(s):  
Tanzina Baby ◽  
Banalata Das ◽  
Anjuman Ara ◽  
Shormin Choudhury ◽  
Jasim Uddain
Keyword(s):  
Fruit Weight ◽  
Growth And Yield ◽  
Stem Length ◽  
Maximum Output ◽  
Treatment Combination ◽  
Base Diameter ◽  
Stem Base ◽  
Yield Parameters ◽  
Flower Plant ◽  
Fruit Diameter

The experiment was conducted at Sher-e-Bangla Agricultural University's Horticulture Farm, Sher-e-Bangla Nagar, Dhaka-1207, to determine the effect of pruning and GA3 on squash growth and yield over the period from November 2017 to February 2018 Three levels of pruning as P0 = No pruning (control), P1 = 1st pruning at 20 DAT (1st and 2nd leaves) and P2 = 2nd pruning at 30 DAT (3rd and 4th leaves) and four levels of GA3foliar application as G0 = No GA3 (control), G1 = 100 ppm GA3, G2 = 200 ppm GA3 and G3 = 400 ppm GA3 considered for the present study. The experiment was laid out in a Randomized Complete Block Design (RCBD) with three replications. Considering growth parameters, pruning treatment had a significant effect on growth, yield contributing parameters and yield of squash except for stem base diameter and individual fruit weight. Regarding GA3 treatments, growth and yield parameters were significantly influenced except fruit diameter. In terms of the combined effect of pruning and GA3 treatments, all the studied growth and yield parameters were significantly influenced. The highest stem length (64.73 cm), number of leaves plant-1 (23.59), stem base diameter (2.09 cm), number of male flower plant-1 (8.69), number of female flower plant-1 (7.52), total number of fruits plant-1 (5.74), fruit length (22.42 cm), fruit diameter (6.15 cm), individual fruit weight (507.66 g), dry weight of fruit (6.61%), weight of fruits plant-1 (2914.33 g) and fruit yield ha-1 (29.14 t) were also found from the treatment combination of P1G1 compared to the other treatment combination. Hence, we can summarize that 1st pruning at 20 DAT (1st and 2nd leaves) with 100 ppm GA3 given the maximum output in terms of yield compared to other treatments.

scholarly journals Fruit production and quality of mini-watermelon with different number of stems, in troughs cultivation system and substrate reuse

2021 ◽  
Vol 42 (2) ◽  
pp. 471-486
Author(s):  
Josiéle Garcia Dutra ◽  
◽  
Roberta Marins Nogueira Peil ◽  
Tatiana da Silva Duarte ◽  
Cesar Valmor Rombaldi ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Positive Impact ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Soluble Solids ◽  
Plant Management ◽  
Cultivation System ◽  
Fruit Number ◽  
Yield And Quality ◽  
The One

Substrate-filled pots are growing systems commonly used for vegetable farming. However, few are the studies available relating them to mini-watermelon cultivation. Our study presents a growing system using substrate-filled troughs and leachate recirculation as a low-cost and less environmentally harmful soilless cultivation system for mini-watermelons. For a growing system to be viable and provide high fruit yield and quality, several aspects must be studied, including substrate physical properties and reuse potential in successive crops, besides plant management-related aspects. Therefore, our goal was to evaluate the effects of a trough system and substrate reuse on changes in the properties of raw rice husk and on fruit yield and quality for mini-watermelons at different stem training. To this purpose, two trials were conducted using nutrient solution recirculation systems. In the first, we evaluated the effects of pot and trough systems. In the second, first- and second-use substrates were compared in the trough system. In both trials, one and two-stem training systems were analyzed. The results of the first trial show that the trough system had a greater positive impact on substrate water holding capacity (WHC), which increased from 7.9 to 15.6%, while the pots increased substrate WHC only to 11.2%. However, both systems neither affected fruit yield (8 kg/m² on average) nor fruit quality. The two-stem training promoted higher fruit yields (4.2 kg/plant) and contents of total soluble solids - TSS (11.4 °Brix) but did not affect average fruit weight. Moreover, the one-stem training provided higher fruit number (7.3 fruits/m²) and fruit yield (9.7 kg/m²). In the second trial, the reused substrate showed a higher WHC (12.4%) than the one used for the first time (9.9%). The reused substrate also provided better results in terms of fruit yield and quality (5.9 fruits/m², 5.3 kg/m², and 10.5o Brix). In the second trial, two-stem training also increased average fruit weight, and hence yields per plant. Nevertheless, the stem number did not affect fruit number per plant, fruit yield per square meter, and fruit quality.

scholarly journals FOLIAR APPLICATIONS OF ZINC, IRON AND MANGANESE INFLUENCE THE PLANT GROWTH AND FRUIT QUALITY OF PAPAYA CV. RED LADY

2020 ◽  
Vol 8 (5) ◽  
pp. 551-557
Author(s):  
Gurjot Singh Pelia ◽  
◽  
A K Baswal ◽  
Keyword(s):  
Plant Growth ◽  
Fruit Quality ◽  
Foliar Application ◽  
Ascorbic Acid Content ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Total Carotenoids ◽  
Heavy Soil

Prevalence of heavy soil is a major problem for fruit cultivation under Punjab conditions consequently leading to deficiency of several micro-nutrients including zinc (Zn), iron (Fe), and manganese (Mn) which adversely affects the growth and productivity. In this view, a study was planned to investigate the effect of foliar applications of zinc sulphate (ZnSO4), iron sulphate (FeSO4), and manganese sulphate (MnSO4) on vegetative growth, reproductive growth and fruit quality of papaya cv. Red lady. Plants sprayed with ZnSO4 (0.4 %) exhibited significantly highest plant height, plant girth, number of leaves, petiole length; initiated an earliest flowering and fruiting; and improved fruit quality viz., fruit weight, fruit length, titratable acidity, soluble solids concentrations, ascorbic acid content, total phenols content, and total carotenoids content as compared with the control and all other treatments. In conclusion, foliar application ZnSO4 (0.4 %) significantly improved plant growth and fruit quality in papaya cv. Red lady.

scholarly journals Apple Orchard Productivity and Fruit Quality under Organic, Conventional, and Integrated Management

HortScience ◽  
2006 ◽  
Vol 41 (1) ◽  
pp. 99-107 ◽  
Author(s):  
Gregory M. Peck ◽  
Preston K. Andrews ◽  
John P. Reganold ◽  
John K. Fellman
Keyword(s):  
Fruit Quality ◽  
Crop Yields ◽  
Block Design ◽  
Leaf Tissue ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Apple Orchard ◽  
Soluble Solids ◽  
Crop Load ◽  
Flesh Firmness

Located on a 20-ha commercial apple (Malus domestica Borkh.) orchard in the Yakima Valley, Washington, a 1.7-ha study area was planted with apple trees in 1994 in a randomized complete block design with four replications of three treatments: organic (ORG), conventional (CON), and integrated (INT). Soil classification, rootstock, cultivar, plant age, and all other conditions except management were the same on all plots. In years 9 (2002) and 10 (2003) of this study, we compared the orchard productivity and fruit quality of `Galaxy Gala' apples. Measurements of crop yield, yield efficiency, crop load, average fruit weight, tree growth, color grades, and weight distributions of marketable fruit, percentages of unmarketable fruit, classifications of unmarketable fruit, as well as leaf, fruit, and soil mineral concentrations, were used to evaluate orchard productivity. Apple fruit quality was assessed at harvest and after refrigerated (0 to 1 °C) storage for three months in regular atmosphere (ambient oxygen levels) and for three and six months in controlled atmosphere (1.5% to 2% oxygen). Fruit internal ethylene concentrations and evolution, fruit respiration, flesh firmness, soluble solids concentration (SSC), titratable acidity (TA), purgeable volatile production, sensory panels, and total antioxidant activity (TAA) were used to evaluate fruit quality. ORG crop yields were two-thirds of the CON and about half of the INT yields in 2002, but about one-third greater than either system in 2003. High ORG yields in 2003 resulted in smaller ORG fruit. Inconsistent ORG yields were probably the result of several factors, including unsatisfactory crop load management, higher pest and weed pressures, lower leaf and fruit tissue nitrogen, and deficient leaf tissue zinc concentrations. Despite production difficulties, ORG apples had 6 to 10 N higher flesh firmness than CON, and 4 to 7 N higher than INT apples, for similar-sized fruit. Consumer panels tended to rate ORG and INT apples to have equal or better overall acceptability, firmness, and texture than CON apples. Neither laboratory measurements nor sensory evaluations detected differences in SSC, TA, or the SSC to TA ratio. Consumers were unable to discern the higher concentrations of flavor volatiles found in CON apples. For a 200 g fruit, ORG apples contained 10% to 15% more TAA than CON apples and 8% to 25% more TAA than INT apples. Across most parameters measured in this study, the CON and INT farm management systems were more similar to each other than either was to the ORG system. The production challenges associated with low-input organic apple farming systems are discussed. Despite limited technologies and products for organic apple production, the ORG apples in our study showed improvements in some fruit quality attributes that could aid their marketability.

Sign in / Sign up

Export Citation Format

Share Document